Macbook Display Darker In Corners
I dont know if I am just being paranoid but I have started noticing that my 4 month old 2GHz Core 2 Duo Macbook display is slightly dark at the bottom two corners. Usually i dont notice it but at times when I see a movie in widescreen, the two dark spots become visible on the black border. Is that normal to do you think Apple will change the display? Its not a major problem but was wondering why it happens. This is my 3rd macbook as one was DOA in a week, other got screwed after I dropped coke on my screen (dont ask). Hence when it comes to Macbook, I am very paranoid
Message was edited by: Tanya Palta
I always keep my display with a completely black background.
There's a noticeable gradation from the bottom to top of my screen as it gets slightly lighter. I see no evidence of differences at the corners. I tilted up, down, and sideways, but even the "gradation" effect is even. But it's an effect noted in a minority of models - particularly the widescreen portables.
http://www.macintouch.com/reliability/macbooks.html
Repair doesn't seem an option. But apparently you're not paranoid.
Similar Messages
-
My Macbook displays photographies often very dark, so that some details are not visible at all. Can there be a problem with the LED light?
You could turn up the brightness of your display. It's also possible the backlighting has gone bad.
-
I have started noticing that 2GHz Core 2 Duo Macbook display is slightly dark at the bottom two corners. Is that normal to do you think Apple will change the display? Its not a major problem but was wondering why it happens. Also sometimes I feel that the display lighting is uneven esp watching movies in widescreen or when black is dominant.
Here is a pic
The bottom corners are atleast one dark shader than the pic
http://www.flickr.com/photo_zoom.gne?id=1968231597&context=photostream&size=lHi Bjorn_Turoque (air-guitar?)
Bring that back to nearest apple store and compare that with their demo unit side by side, and asked the genius guy to calibrate or fix it.
Also did you try to calibrate yourself, or play with system preference.
system preference > display > color > calibrate
system preference > Universal access > Seeing and slide the enhance contrast slider back to normal to decrease the bluish.
Good Luck. -
User Contributed Tips in the MacBook (Original) The MacBook Display forum
*The following User Contributed Tips are located in the MacBook (Original) > The MacBook Display forum:*
<pending>
*The following related tips are located in other areas of Apple Discussions:*
a brody - Using a second Mac as a display for a first
http://discussions.apple.com/thread.jspa?threadID=1587927
Publish date: July 7, 2008
See also User Tips Library -
I own a black macbook (early 2008 model) and for the past few months the display has occasionally (although recently more often) failed to turn on when booting. This only happens every one in four times after a full shut down. When I turn on the computer, I hear the hard drive boot and the fans start going, I also get a response in the white light indicator. When this occurs, I then have to press the on/off button to shut the macbook down, then press the button to turn it on again. Sometimes this works on the second try, but other times it takes 3 to 4 times turning it on or turning it off. Initially I thought it was a hard drive issue (and planned to purchase a new hard drive), but after connecting the laptop to an external screen, the desktop shows up (macbook display remains off despite unplugging or replugging external display). Is this a firmware issue? Or potentially a display cable issue? I'm leaning towards firmware since it only happens every 1 in 4 times. All parts in the macbook are original to 2008 and I've never really had any problems before.
I've tried resetting by taking out the battery/pressing the on button.
I also did a clean 7 pass wipe and reinstalled Mac OSX.
Used TechTool Deluxe - found no issues.
Booted computer and pressed D to perform a Mac hardware test - no problems found.
Not sure what to do now...
These two looked mildly like my problem: http://www.ifixit.com/Answers/View/68700/Not+booting+properly+after+10.6.8+and+F irmware+updates and another suggested replacing the display cable: http://www.ifixit.com/MacBook-Parts/MacBook-Display-Data-Cable/IF186-073?utm_sou rce=ifixit_guide&utm_medium=wiki_text&utm_term=if186-073&utm_content=product_lin kI own a black macbook (early 2008 model) and for the past few months the display has occasionally (although recently more often) failed to turn on when booting. This only happens every one in four times after a full shut down. When I turn on the computer, I hear the hard drive boot and the fans start going, I also get a response in the white light indicator. When this occurs, I then have to press the on/off button to shut the macbook down, then press the button to turn it on again. Sometimes this works on the second try, but other times it takes 3 to 4 times turning it on or turning it off. Initially I thought it was a hard drive issue (and planned to purchase a new hard drive), but after connecting the laptop to an external screen, the desktop shows up (macbook display remains off despite unplugging or replugging external display). Is this a firmware issue? Or potentially a display cable issue? I'm leaning towards firmware since it only happens every 1 in 4 times. All parts in the macbook are original to 2008 and I've never really had any problems before.
I've tried resetting by taking out the battery/pressing the on button.
I also did a clean 7 pass wipe and reinstalled Mac OSX.
Used TechTool Deluxe - found no issues.
Booted computer and pressed D to perform a Mac hardware test - no problems found.
Not sure what to do now...
These two looked mildly like my problem: http://www.ifixit.com/Answers/View/68700/Not+booting+properly+after+10.6.8+and+F irmware+updates and another suggested replacing the display cable: http://www.ifixit.com/MacBook-Parts/MacBook-Display-Data-Cable/IF186-073?utm_sou rce=ifixit_guide&utm_medium=wiki_text&utm_term=if186-073&utm_content=product_lin k -
I have an '07 MacBook that took an unfortunate tumble and destroyed all but one corner of the screen. I was going to replace it over the summer with a Desktop and an iPad, but I don't want to get the Desktop now as I'm moving soon.
So what I'm wondering is if it would be possible to hook the iPad up to my MacBook somehow and use it as a display so I can access my MacBook until I can buy a Desktop. I've seen a few topics about using the iPad as a split screen for the Pro but I'm looking for it to completely replace my MacBook display.Welcome to the Apple Discussions!
Without a display it is difficult to configure any Mac. In the past did you ever enable screen sharing in the System Preferences so that you could view your MacBook from another Mac? If so you may be able to install an app that allowed you to use the iPad by first accessing your MB from another Mac over a network. But that would be difficult to do if you never enabled screen sharing.
If perchance you could install on your MB the apps needed you might look at Air Display for viewing your MB's display from an iPad.
Dah•veed -
Macbook Display vs LCD Display
How does my macbook display compare to a 1080i lcd screen
The 1080 in 1080i is vertical resolution. Assuming a 16:9 widescreen TV, the resolution would be 1920 × 1080. The MacBook LCD's native resolution is 1280 x 800.
-
Hello
Late last week while merely surfing the web, I noticed some flickers on my macbook display. I had never seen those before. I've read about flickers on discussions here. Then over the weekend, I would start the computer only to have the display not light up instantly.
The machine is on, and you'd have to hold the MB certain, slight ways (against a light) to see that it is operating. Sitting the MB certain ways would enable the display to actually light up to its normal brightness.
But Monday the display would not light up at all. Again, the MB is operational, the battery is fully charged. But the display is nearly pitch black. Only squinting at it can you see any tiny, grainy vision of the desktop screen. I've tried, out of curiosity, things like extracting and replacing the battery, but to no avail. Might anyone here have any clue as to what's going on? I expect at the least to take it to an apple store/genius bar later this week. Any help/insight would be appreciated.
MacBook Mac OS X (10.4.6)bad monitor cable or fault of monitor cable at logic board connector.
There is no "fix", there needs to be hardware replacements installed
Contact Apple for full diagnostic and replacing your monitor -
Hello,
I recently purchased the iKlear Travel Wipes Kit to use in cleaning my screen. I followed the instructions exactly and did result in screen smearing which (after researching on these forums), was resolved by vigorously buffering the screen with the included Blue Chamois cloth in the kit.
Now that my screen is back to normal, is there ANY other product on the market (particularly in Canada) which is available to clean the glossy MacBook display without the result of buffer-able residue streaking? A product which possibly just comes right off without so much effort as required with iKlear Polish?
Thanks.I use to clean my screen using micro fiber streak free wipes.
I try not to touch my screen, so what on the screen is mostly dust that is easily wiped out with dry cloth above.
But for smudge oil or finger print on the screen, I damp the fabric lightly by spraying water to the fabric (never spray anything right to the screen). And wipe it clean.
For some oily mark that water cannot erase, I either spray iklear or windex glass (not recommended but work well on my case) lightly on that damp cloth and wipe it one more time. And it makes my screen crystal clear as new.
Good Luck. -
So last night I was in a car accident and my MacBooks display is broken. It is miss aligned and cracks in the display. What are my options does apple cover this? How can I get it repaired? Would my home insurance cover this?
check out www.mbresq.com. I sent them my macbook when my screen got cracked, they mailed me a box sent it off got it back 2 days later or something with a brand new screen. The plus side is it only cost $440. Whoever said apple pays $400 for the lcd is full of it. I wouldn't doubt if they buy them for less than $100, and just gouge people who have broken screens. You can also buy screens yourself and attempt to replace it yourself, but that's a lot more work, and can be much more frustrating.
Phil -
MacBook display brightness will not adjust
My MacBook display brightness is very low level, the F1 and F2 brightness keys bring up the transparent window and show brightness turned all the way down, but F2 does not increase the brightness. In Preferences, the display section shows the Brightness slider all the way to the top, and if I attempt to slide that down it snaps back to the top, and the actual screen brightness does not change from very low. I also have verified that the function keys are NOT set to lock out the brightness function, so pressing command and F1/F2 does nothing. So nothing from previous forums seems to apply! All other function keys operate properly (multi-window, volume, dashboard).
OK guys, think I found a solution to this one.
My girlfriend's mac had the same problem as yours, and I was motivated to fix it becuase I needed to use my mac for my dissertation and she kept stealing it!
anyway, turn the brightness all the way down, press it up once and you will see the screen flash. do it again, really fast up and down up and down and the scree will stay on as long as you keep playing with the buttons.
next, use this temporary fix to get into system preferences -> displays... and change the resolution to something considerably lower. then it stays on permanently. Not too sure about why this happens, maybe the mac can no longer handle that many colours or complexities?
sod it. enjoy. -
MacBook Display Intermittently Freezes and Starts Fading to White (Refers)
I have an issue with my MacBook display freezing and gradually fading to grey/white. The issue appears to be shared by other users. Since it would appear to also fit into the title of this forum, if you have any contribution, please go to http://discussions.apple.com/thread.jspa?threadID=2431145&tstart=0. Please post any responses there. Many thanks!
Having the same exact issue as OP with my 2007 Macbook Pro. I'll be contacting Apple tomorrow to see if I can get it fixed (w/o a warranty). Right now I have a clamp on the right side of the screen squeezing the bezel to keep the screen active.
http://www.youtube.com/watch?v=hWIc8Vf7QBE
Video of some other person's laptop to clear up any confusion about what it looks like. -
Can I turn darken my MacBook display while I use a Cinema Display?
I have purchased a Cinema Display and external keyboard. I have tried to figure out how my MacBook display can be asleep while I use the Cinema display--I'm stuck!
<http://support.apple.com/kb/ht3131>
-
Is it possible to mirror my macbook display onto a powerbook?
Hi. I'm wondering if it were possible to mirror my macbook display onto a powerbook such that videos watched on both screens would be in sync? What are the cables I might require for such a set-up or is there any software I might need to obtain? Thanks.
OnLocation from Adobe
HD Monitor
ScopeBox
VeeScope
among others -
New MacBook Display is Horrible
I just got my new Aluminum MacBook last night, and it's going right back for refund this morning. The LCD is far inferior to my 1st generation MacBook display, and it's actually one of the worst displays I've seen on a modern notebook computer. I've been an Apple owner since I bought an SE/30, but Apple has screwed up badly here, and I find the new MacBook nearly unusable. (Please note, my current MacBook has a glossy screen; that level of glossiness is not the issue here.)
The issues:
1. The whole screen has an icky blue cast, and nothing in the display calibration settings will fix this. My old MacBook has a much more pure and natural looking white. I think Apple needs to work more on the LED back-lighting (or maybe they cheaped out on the MacBook LEDs).
2. The blacks on the new display are washed out. This is obvious on the start-up animation (with the multi-lingual "welcome" animations against the Leopard nebulae in space). It's not just an issue with black images, however, this propagates to everything looking less crisp. And it's not an issue of adjusting brightness or screen angle. In fact, if you try to adjust the screen angle to get some reasonably good blacks, you get parts of the screen where you have a metallic or posterized effect. I saw this in the store displays as well, but I didn't realize that it would occur under normal viewing angles vs. extreme situations.
3. Colors are not vibrant (nothing compared to my 1st generation MacBook). By not vibrant, I mean that different hues of blue, for example, are not distinct from one another. When I open Word, the splash screen has four different blue colors in the "feather" shape at the top right. On the old MacBook the blues are distinctly different and colorful, on the new MacBook they are much closer in hue and more dull. I think this is a result primarily of issues one and two above, but it may also have to do with other aspects of the inferior LCD on the Aluminum MacBook.
4. The new MacBook screen should be called "mirrored" not "glossy". My 1st generation MacBook has a glossy screen. It's good. I rarely have an issue with visible reflections from it. The new MacBook is a constant battle. One major problem is that the screen needs to be pushed farther back to get reasonable contrast, but this angle directly reflects ceiling lights at the user. It's also so significantly more reflective than the previous glossy screen that it picks up windows and floor lamps and everything else a lot more easily. It's a mess.
I hope this helps other folks avoid my mistake in seeking to upgrade from an existing MacBook. The new one is not any faster in day to day use (3D rendering excepted), and it has crippling issues with the display.Hey Araboston,
Unfortunately, I personally don't see what you're talking about on my machine, however I want to help in any way I can. First off, it's possible you're seeing two different problems emerge. Using the mini-display port is a different technology than the mini-dvi port of yesteryear. I know from experience, when I hook up components to my hd tv using different connections (hdmi vs. component cable) I notice a difference. With the new technology you may have to re-calibrate your secondary monitor.
As for the laptop screen, I'd be interested to know what lighting conditions you're using your laptop mostly in. Mine worked great in all conditions, right out of the box. But, I'd like to also note that when I checked, the battery count showed a count of 7. In real world terms, that means that the battery was discharged and recharged 7 times. I'm wondering if they do some sort of in-house calibration, that was possibly missed on your machine. The best test would be to take your macbook into the apple store, set it next to a display macbook and see if yours looks any different.
Best of luck.
Maybe you are looking for
-
HOW TO ELIMINATE BLANK PAGES IN REPORTS?
Sep 11, 2002 13:07 PT I'am having troubles with reports, i have design a report that has 2 sql, so there are 2 layouts in the report, the first one has many columns so I put it in 2 pages wide but the second sql is only four columns, so it is in just
-
mac book pro 13 wont atart up all i get is a folder icon with a question mark in it any help ?
-
Issue in Flat File load through FTP set up
Hi All, I am trying to load the flat file using FTP set up ( through process chain ). I put a file in the FTP server, the file is being picked up from the FTP server but I cannt see the same in Interface file manager (ZIFM) under unfinished or comle
-
Hi Experts, Is it possible to change days to be seconds in the lead time field of item master data --> planning tab ? if not, how could we include the cycle time of production machine in the MRP wizard ? We would like to know how much the production
-
I'm in the process of converting P3 to P6 and need to create a P6 schedule with bar codes in the gantt chart area. Is this possible at all? If not, does anyone have a work around?