MacBook does not start after installing more RAM

Ok i bought a second hand MacBook from early 2009 and planned to use it to record songs in a small home studio using GarageBand, Live and protools, it came with 2gigs Of RAM and i tought i should take it up to 4 -the max it can handle- so i bought 2 2gigs a-data RAM sticks i took the factory ones out and put the new ones in but no way the "on/off" light turns on but nothing happens, no sound black screen, if i combine the factory ones and the new Inés whatever the order it works and i get 3 gigs combined but it just Won't Work with the 2 2gig ones in… the 4 are ddr2 working At 667mhz as i checked in the 'about this Mac > more options' what can i do… help! :(

If you bought your RAM at a place that also sells PC RAM you may have gotten mislabelled RAM. PCs can handle different RAM speeds so they’ll often label higher speed RAM as a lower speed rather than make two different speeds of RAM. But Macs are much more picky. They require a RAM stick to be exactly 667mhz not 675mhz or 800mhz. The way to tell is to put one of your old RAM sticks in and it will force the new RAM to run at the correct speed.
  This is from one review of PNY RAM:
"These modules are actually 800Mhz. PNY no longer makes or sells 667Mhz modules. Not all computers that require 667Mhz are compatible with 2 800Mhz modules. They refuse to down clock properly. This is especially true with a number of Core 2 Duo MacBooks. Spoke to PNY support, they flat out told me that yes, they sell 800Mhz modules in 667Mhz packaging. If you RMA a module that is 667Mhz (or supposed to be 667Mhz) they will replace it with an 800Mhz module as they no longer have any 667Mhz SODIMMs, not even for RMA replacement!"

Similar Messages

  • Macbook does not start after installing Leopard

    I installed/upgraded to Leopard but had to cancel it despite the warning that the machine maz not be able to start up again. Hours later i started the mac again and the installation programe came on immedialtey. Installation was completed but on the restart it gets stuck. It just loads )apple sign with little loading sign below) but nothing happens!
    Please help!!

    If you bought your RAM at a place that also sells PC RAM you may have gotten mislabelled RAM. PCs can handle different RAM speeds so they’ll often label higher speed RAM as a lower speed rather than make two different speeds of RAM. But Macs are much more picky. They require a RAM stick to be exactly 667mhz not 675mhz or 800mhz. The way to tell is to put one of your old RAM sticks in and it will force the new RAM to run at the correct speed.
      This is from one review of PNY RAM:
    "These modules are actually 800Mhz. PNY no longer makes or sells 667Mhz modules. Not all computers that require 667Mhz are compatible with 2 800Mhz modules. They refuse to down clock properly. This is especially true with a number of Core 2 Duo MacBooks. Spoke to PNY support, they flat out told me that yes, they sell 800Mhz modules in 667Mhz packaging. If you RMA a module that is 667Mhz (or supposed to be 667Mhz) they will replace it with an 800Mhz module as they no longer have any 667Mhz SODIMMs, not even for RMA replacement!"

  • Game does not start after installing on mac pro

    Game does not start after new install on mac pro ?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Safari does not start after installing Mountain Lion

    I installed Mountain Lion on my Imac. No problem. However after installing ML on my MacBook Safari doesn't open. I have installed ML again but still it does not work.
    Help!

    You haven't indicated if you have tried multiple DVD/CD's or just the one. Look under the "Apple > About This Mac > More Info.. > Disk Burning " do you see the Superdrive? If the system recognizes it but it doesn't work try a
    SMC RESET
    http://support.apple.com/kb/HT3964
    Shut down the computer.
    Unplug the computer's power cord and ALL peripherals.
    Wait 15 seconds.
    Attach the computers power cable.
    Wait another 5 seconds and press the power button to turn on the computer.
    The 5 second timing is important to a successful reset.

  • Oracle web tier install+config: opmn does not start after install

    Centos 5 box.
    After a silent install of web tier 11.1.1.2 opmn will not start. The installation was "complete" but I found some errors in the various log files.
    When I try to start a process (for example) using opmn this error occurs in the log file:
    [2011-03-31T16:31:49][opmn][TRACE:1][][OPMN]Failed to open wallet (file:/apps/oracle/orahttpserver/as_1/instances/instance2/config/OPMN/opmn/wallet) [default password] (28759)
    Command line says unexpected error, code 512 or something to that effect. The given wallet directory is empty.
    Checking back through the install & configure logs:
    java.lang.NoClassDefFoundError: oracle/security/crypto/core/PublicKey
            at oracle.as.config.utl.FileUtil.createSelfSignedOracleWallet(FileUtil.java:697)
            at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:631)
            at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:667)
            at oracle.as.config.utl.FileUtil.generateWallet(FileUtil.java:558)
            at oracle.as.config.impl.OpmnProvisioner.generateWallet(OpmnProvisioner.java:70)
            at oracle.as.config.impl.OpmnProvisioner.createOpmnConfiguration(OpmnProvisioner.java:366)
            at oracle.as.config.impl.OracleASInstanceImpl.createOpmnConfiguration(OracleASInstanceImpl.java:586)
            at oracle.as.config.impl.OracleASInstanceImpl.create(OracleASInstanceImpl.java:107)
            at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createASInstanceWrapper(CreateASInstance.java:137)
            at oracle.as.install.webtiercd.webtierconfig.util.CreateASInstance.createStandaloneASInstance(CreateASInstance.java:83)
            at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureInstanceStandalone(WebtierConfigurationAction.java:590)
            at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.configureStandalone(WebtierConfigurationAction.java:441)
            at oracle.as.install.webtiercd.webtierconfig.actions.WebtierConfigurationAction.doExecute(WebtierConfigurationAction.java:174)
            at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
            at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
            at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
            at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
            at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
            at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
            at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
            at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
            at java.lang.Thread.run(Thread.java:619)
    Caused by: java.lang.ClassNotFoundException: oracle.security.crypto.core.PublicKey
            at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionClassLoader.loadClass(StandardConfigActionClassLoader.java:75)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
            at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
            ... 22 more
    The configuration of  completed successfully.
    Checking a screen shot of someone else's configure output theirs continues beyond
    "Bootstrapping OPMN configuration files..."
    and correctly generates the instance etc.
    I have tried a reinstall, and also tried a generate a new instance using the silent config tool. Same errors each time.
    Log also states;
    Oracle Instance Home
                            Instance Home Size: 0 MB (or 40mb)
                            Available: 0 MB
    . This varies between installs and configs but available is always 0. There is Gb's of space available in the directory and the user has write permissions.
    Can anyone tell me why it is failing to correctly generate the wallet?                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   

    Solved. Oracle_home and Instance home must be subdirectories of MIDDLEWARE_HOME. MIDDLEWARE HOME and command to not install updates must be added to response file. Helpful to install and configure separately.

  • Apache does not start after installing the policy web agent

    Hi,
    We get the following error when we start the apache webserver on linux which has opensso policy agent installed/configured to it.
    ./apachectl start./apachectl: line 77: 4453 Segmentation fault $HTTPD -k $ARGV
    Environment:
    OS: Linux SystemName 2.6.9-42.ELsmp #1 SMP Wed Jul 12 23:27:17 EDT 2006 i686 i686 i386 GNU/Linux (32 bit)
    WebServer: httpd-2.0.50-i686-pc-linux-gnu.tar.gz
    Policy Web Agent: Apache_2.0.54_agent_2.2_RHAS3.0.tar.gz
    Could not find the issue/solution for this problem on internet... Please suggest if anyone has some solution to this.
    Regards
    Manoj

    Hi,
    Once I had an iAS 1.0.2.2 running without problems. However after installing Patch 7 for Forms (released 27 august 2001) I get exactly the same error messages as Pieter. I have tried starting apache as administrator, comment out mod_ose, set wv_gateway_cfg, but none seem to work. Please help.
    Environment:
    iAS 1.0.2.2 on Windows NT
    Oracle 817 on AIX
    null

  • InDesign does not start after installing it first time due to missing plug ins ("Zusatzmodule")

    Hello,
    I was using up to now InDesign CS3, but I bought the upgrade to InDesign CS 6.
    After installing the new version I tried to start it, but during the start it complains about missing plugins and stops.
    So, I can not run CS 6.
    The missing modules are: SVG Export.apln and Dynamicdosuments.rpln.
    What can I do to make CS 6 running?
    Thank you,
    Gunnar

    Hello Mylenium,
    thank you for your answer.
    I have to admit, that unfortunately I dont understand the reply. I was uninstalling, running the Adobe CS cleaner tool for CS 6, reinstalling (as suggested in other entryies of the forum). No improvement.
    Question A: Do I have to run the cleaner tool for all CS including CS 3? I am a bit afraid of side effects and have nothing running afterwards. Since nobody confirmed in the forum that this will help I dont dare to play around.
    Question B: Coming back to your proposal, what do you mean by proper admin privileges? I am the only user on this laptop and never did something to any admin configurations.
    Finally, I installed CS 6 on another laptop. This works. However, this one I dont want or can't work with for other reasons.
    Gunnar

  • My mac does not start after installing maverick

    I had perfect macbook pro until I upgraded to Maverick. Screen says installing with big X in the middle and Barber type ribbon moving over two hours.

    i did the same then my monitor shows only lines. i tried to restart several times but same display shows.

  • Does your iTunes Hang or Does Not Start after install??

    Instead of disabling or turning off ViruScan, Firewalls or Internet Security programs... go to the program's home site and look for way to add iTunes to exception list to run.
    In my case I run Symantec Internet Security 2005. I went to Symantec Site, searched for iTunes and found the following link.
    http://service1.symantec.com/SUPPORT/nip.nsf/9b03f744dbf849f8882570cb0002a0c8/7f b6e478e2a1abf78825708b00558625?OpenDocument&src=barschnam&seg=ag
    I then added iTunes to the exceptions list for my Personal Firewall.... voila.. iTunes works now no problemo.
      Windows XP Pro  

    JAVA_HOME is set to "/opt/java" in /etc/profile.d/jdk.sh. If you just installed the jdk, the behavior you're describing is expected as JAVA_HOME hasn't been exported.
    Try logging out and then logging back in.
    Last edited by foutrelis (2008-11-23 15:49:42)

  • My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

    Hy myneck,
    Happy Holidays!  The resource below may provide some steps to try if your MacBook Pro won't start.
    Troubleshooting: My computer won't turn on - Apple Support
    http://support.apple.com/en-us/TS1367
    This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
    You don't hear a startup chime.
    You don't hear any fan or drive noise.
    There is no video on your built-in or external display
    If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
    You may hear a startup chime.
    You may hear fan or drive noise.
    You may see a light from the Sleep LED (if your Mac has one).
    Pressing the Caps Lock key on the keyboard causes it to light. 
    If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
    If your computer won't turn on, try each of these steps:
    Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
    If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter. 
    Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
    Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
    If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
    MacBook Pro: How to remove or install memory
    MacBook: How to remove or install memory
    Mac Pro: How to remove or install memory
    Mac mini: How to remove or install memory
    iMac (27-inch, Late 2012): Installing or replacing memory
    iMac: How to remove or install memory
    Reset the SMC.
    If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
    I hope this information helps ....
    - Judy

  • MacBook does not restart after software upgrade without power adaptor

    Hi everbody,
    I've done a big mistake while updating my macbook without power adaptor plugged...
    After having started the installation, I had many other things to do and completely forgot the installation. So I guess the macbook stopped when the battery had no more power.
    The problem is that the macbook does not start any longer, with or without the power adaptor. I've tried the different ways to start the macbook described in the faq, but without success. When I plug the power adaptor, there's no signal and the battery remains very low.
    So, if someone has a way to restart my macbook, I'd be greatly happy !
    Thanks

    I've solved my problem by disassembling and reassembling the power supply.

  • RAC does not start after trying to move storage

    Hello,
    We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
    RAC does not start after we reformated the storage to RAID 10.
    What we did:
    1) deleted the database
    2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
    3) on both nodes
    - recreated VotingDisk
    node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
    Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
    successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
    node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
    Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
    successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
    - tried to move OCR but was able only on one node:
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
    /u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
    These return ok for both node1 and node2:
    node1:oracle$ cluvfy stage -post hwos -n node1
    node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
    Performing post-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "node1"
    Destination Node                      Reachable?
    node1                                 yes
    node2                                 yes
    Result: Node reachability check passed from node "node1".
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name                             Comment
    node2                                 passed
    node1                                 passed
    Result: User equivalence check passed for user "oracle".
    Checking Cluster manager integrity...
    Checking CSS daemon...
    Node Name                             Status
    node2                                 not running
    node1                                 not running
    Result: Daemon status check failed for "CSS daemon".
    Cluster manager integrity check failed.
    Checking cluster integrity...
    Cluster is divided into 2 partitions.
    Partition 1 consists of the following members:
    Node Name
    node1
    Partition 2 consists of the following members:
    Node Name
    node1
    node2
    Cluster integrity check failed. Cluster is divided into 2 partition(s).
    Checking OCR integrity...
    Checking the absence of a non-clustered configuration...
    WARNING:
    CSS is probably working with a non-clustered, local-only configuration on nodes:
    node1
    Verification will proceed with nodes:
    node2
    Uniqueness check for OCR device passed.
    Checking the version of OCR...
    OCR of correct Version "2" exists.
    Checking data integrity of OCR...
    Data integrity check for OCR passed.
    OCR integrity check failed.
    Checking CRS integrity...
    Checking daemon liveness...
    Check: Liveness for "CRS daemon"
    Node Name                             Running
    node2                                 no
    node1                                 yes
    Result: Liveness check failed for "CRS daemon".
    Checking daemon liveness...
    Check: Liveness for "CSS daemon"
    Node Name                             Running
    node2                                 no
    node1                                 no
    Result: Liveness check failed for "CSS daemon".
    Checking daemon liveness...
    Check: Liveness for "EVM daemon"
    Node Name                             Running
    node2                                 no
    node1                                 yes
    Result: Liveness check failed for "EVM daemon".
    Liveness of all the daemons
    Node Name     CRS daemon                CSS daemon                EVM daemon
    node2         no                        no                        no
    node1         yes                       no                        yes
    Checking CRS health...
    Check: Health of CRS
    Node Name                             CRS OK?
    node1                                 unknown
    Result: CRS health check failed.
    CRS integrity check failed.
    Post-check for cluster services setup was unsuccessful on all the nodes.
    Please help.

    Thanks for the answer.
    Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
    You can see that cluster is not healty from cluvfy output.
    When I tried to start crs whith crsctl start crs but:
    - on node2 none of the demons starts (CSS, CRS or EVM)
    - on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
    Problem 2: Cannot change OCR location
    node2:root$ cat /var/opt/oracle/ocr.loc
    +#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
    ocrconfig_loc=/dev/rdsk/c7t30d0s3
    local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
    PROT-1: Failed to initialize ocrconfig
    node1:root$ cat /var/opt/oracle/ocr.loc
    ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
    local_only=TRUE
    node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
    PROT-1: Failed to initialize ocrconfig
    Problem 3: On node 1 I wrongly issued a command
    node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
    Successfully accumulated necessary OCR keys.
    Creating OCR keys for user 'root', privgrp 'root'..
    Operation successful.
    Configuration for local CSS has been initialized
    Adding to inittab
    Startup will be queued to init within 30 seconds.
    Checking the status of new Oracle init process...
    Expecting the CRS daemons to be up within 600 seconds.
    Giving up: Oracle CSS stack appears NOT to be running.
    Oracle CSS service would not start as installed
    Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started

  • My MacBook does not start

    My MacBook does not start up. I do not get further than the apple logo and spinning wheel

    You could try the processes described in the following Support article to test and troubleshoot the computer, before applying the SMC reset section here...
    •Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    This covers several items, including SafeBoot and others, that could help resolve the problem; including the reset notion itself. When you troubleshoot, not all items are necessary; stop at the first one that works. If none of them work, try them again. Maybe up to three times.
    If you have the OS X install disc DVD, you may need to use it at some point, in troubleshooting or repair; since there also may be a problem with the hard disk drive or system startup files on it. The booted OS X install disc allows one to use OS X utilities, such as Disk Utility, to attempt repair; not limited to installations, the utility can attempt a repair on an unmounted system disk drive, thus booting Mac from the DVD.
    Good luck & happy computing!

  • EXE DOES NOT START AFTER DOWNLOADING

    I downloaded lr 4.3 but double clicking it does not open the exe. When I double click older lr downloads they still open normally.Right clicking and open does not work either. What to do?

    Windows Vista Home Premium 6.0.6002 SP2 Build 6002, Intel Core 2 Quad
    Q9300 2.5GHz. When I double click the download, the arrow starts rotaing
    for about 30 seconds and then disappears without any new window opening
    Op 17/12/2012 23:55, Jeff A Wright schreef:
    >
          Re: EXE DOES NOT START AFTER DOWNLOADING
    created by Jeff A Wright
    <http://forums.adobe.com/people/JeffAWright> in /Downloading,
    Installing, Setting Up/ - View the full discussion
    <http://forums.adobe.com/message/4928607#4928607

  • My sound system does not work AFTER installing pc to tv wireless connection

    my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

    Hi,
    You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
    Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
    one used by the Form contact for Form Invoice.
    Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
    VS General Question forum mainly discusses
    the usage of Visual Studio IDE such as
    WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
    System and Visual Studio Editor.
    Thanks,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • PC won't boot after memory upgrade (on MSI P45D3 Platinum)

    I am having a problem on my MSI P45D3 Platinum motherboard system (Dual OS: Win XP and Win 7) Until recently I was running it on PATRIOT 2GB (2x1GB) 1600MHz DDR3 PDC32G1600LLK memory (CL7) and all was fine, though running only at 1066MHz, since I cou

  • Autofill is no longer working

    Since the more recent updates, Autofill is no longer working in Safari 6.1.  The Autofill alert pops open as I'm filling in an online form, but when I click on it, nothing happens.  I've tried the suggestions to change Safari preferences, but I've al

  • WSync No Longer Working

    As of 6AM Windows Update Synchronization was still working.  Around 9AM I installed the web application service point and web application service roles, and assigned a certificate to port 443 in IIS for the web application catalog.  I noticed after n

  • Paper Layout displayed instead of Web Layout

    Hello All, I've developed a report in Reports 10g and saved it as a jsp file, having both paper & web layout. I've also designed a form in Oracle forms 10g with a list item displaying the list of all reports available. I've written the following piec

  • Clean Install Yosemite onto new SSD (Also, what is TRIM?)

    Hi, I've been researching how to replace the Hard Drive on my Late 2011 13inch Macbook Pro (MacBookPro8,1 / 2.4 GHz / Intel Core i5 / SATA III) with a new SSD (maybe a Samsung 840 EVO) and clean install Yosemite onto it. I've found a few ways to do t