MacBook, page up or down buttons? Are there any?

or do you just use the pad. My fingers keep going for it...I don't think there are any page up and down buttons.

Also in some apps the Command(key next to space bar)-up/down arrow acts as page up and page down.

Similar Messages

  • Keyboard with Power Button - are there any and which ones.

    In the process of DIY repair of the SuperDrive, I broke the power connection button on the case of the emac after the repairs were done...I WAS SO close to finishing this repair and now I can't even turn it on.
    Please help.
    Does this keyboard have a power button?
    Kensington Slim Type Keyboard for Mac ( 64366 )
    emac 800 mHz   Mac OS X (10.4.4)  

    683/3129
    One keyboard I know has a power button is the Matias TactilePro.
    But it won't help you because your Mac is one of the new models that can't be powered this way.
    Good luck!
    Axl

  • XI - Can I Add Page Up and Down Buttons Back?

    I just updated to XI and the page up and down buttons that used to be on the toolbar are gone.  Is there a way to add them back?
    Thank you.

    You can customize the tool bar like any other program. You are given a standard basic set of tool bar buttons and you can customize it as needed.
    Customizing Toolbars in Acrobat X
    Enterprise Toolbar Customization in Acrobat and Reader X

  • I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

    I bought mountain lion for my macbook pro and I'm trying to install it and it says there was an error and I need to boot up but I don't have any other start up disks to boot up with. Are there any suggestions of how I could get my computer started?

    Hold the Option key down and restart. Select one of the drives that comes up and hit the Return key.

  • My MacBook Pro beeped when I started up. Never happened before. I want to get it looked at, but I'm living in Antalya, Turkey right now. I will be in Athens, Greece until January 1st-are there any Apple stores in Athens? Please help. Thank you.

    I have a mid 2012 MacBook Pro and it started to beep for the first time when I started up today. I think it was 3 continuous beeps then a pause. It sounded like an alarm and totally freaked me out. Then I pressed the on/off button for about 5 seconds and it restarted. I was able to get online, but then I had trouble with the trackpad, which is okay now. I have AppleCare and want to take it to an Apple Store, but I'm currently residing in Antalya, Turkey. I will be in Athens, Greece until January 1st. Are there any Apple Stores in Athens, Greece that I can take it to or Antalya, Turkey???  Thank you.

    https://locate.apple.com/gr/el/

  • HT3131 Are there any ventilation issues with running a macbook air in clamshell mode?

    Are there any ventilation issues with running a macbook air in clamshell mode?

    ...that makes sense to me. 
    but, why do so many MBA users (on this forum and others) claim that ventilation occurs through the keyboard?  Is this claim based on an old macbook design?
    for example, here's a related discussion (although fairly old): 
    11-08-2010, 12:16 PM
      #6 (permalink)
    SP Forsythe 
    Notebook Evangelist
    Join Date: Jul 2007 
    Location: California
    Posts: 660
    Rep Power: 14
    Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
    Quote: 
    Originally Posted by tHE j0KER
    Actually I you shouldn't close the lid while running on an external screen. The keyboard of the Macbook is an air intake for the fan. Close the lid, and it could overheat.
    A common misconception of unknown origin. The intake and the exhaust for the cooling fan on the 13" MB and MBP are both located on the rear slot at the base of the hinge. In fact, you can actually see the divider that separates the intake flow from the output flow. If it were through the keyboard crevices, then an awful lot of overheats would result from people using impermeable keyboard covers, as well as Apple's warranty department would be flipping out over the Apple store carrying such covers. iSkin ProTouch FX Keyboard Cover for all MacBooks - Black Printed Keys on White - Apple Store (U.S.) 
    Does one think that Apple sells these only for use when the Notebook is off??? http://store.apple.com/us/product/TW...co=MTM3OTUwMDE Closing the lid, whilst operating the unit actually results in cooler operation due to reduction in power consumed by operating the display, which in supporting the on-board display generates heat far greater than simply powering the video port.. 
    Does one think that Apple sells these for use only when the MacBook is off? http://store.apple.com/us/product/TW...co=MTM3OTUwMDEApples direction for use is specifically for when using with an external display.
    Currently using:
    Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
    MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion
    11-08-2010, 02:34 PM
      #7 (permalink)
    ajreynol 
    Notebook Virtuoso
    Join Date: Mar 2009 
    Location: Ann Arbor, MI
    Posts: 2,542
    Rep Power: 18
    Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
    once again, I've tried a few of these keyboard covers. the Moshi keyboard cover is the ONLY one I can recommend. the others are too thick or change the keyboard experience too much.
    17" Apple MacBook Pro | i7 2720m | 160GB SSD + 750GB | 16GB | HD 6750M 1GB
    Dell 435MT | i7 920 | 10GB RAM | 7.64TB HDDs | HD 6970 | Win7+SL
    HP Elitebook 2710p Tablet PC | 1.8GHz C2D | 4GB RAM | 160GB HDD | X3100
    Apple iPhone 4 32GB | Apple iPad 64GB (Gen 3)
    Stop random laptop wakeup | 5K500.B bench data | How to Disable PowerMiser
    Disable Vaio beep when pressing volume or special keys
    11-08-2010, 03:34 PM
      #8 (permalink)
    doh123 
    Without ME its just AWESO
    Join Date: Feb 2009 
    Posts: 3,282
    Rep Power: 22
    Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
    1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
    2. The thing you plug into the wall is not a battery charger. The actual "charger" is built into the computer. It knows when to charge and when not to. If the little light on the power plug is amber, then its charging your battery. When its green, its just powering the laptop and NOT charging your battery at all.
    Mac OS X Gamer/Porter
    (We do exist!)
    Wineskin 2.5 is available!. Turn Windows apps into Mac apps for free!
    11-08-2010, 03:38 PM
      #9 (permalink)
    Wolfpup 
    Notebook Virtuoso
    Join Date: Jun 2007 
    Posts: 3,871
    Rep Power: 28
    Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
    I'd leave the lid open, at least partially...yes it may be fine not doing that, but you are making heat dissipate worse, of course could even theoretically hurt the screen.
    As for the battery...well there's really only two choices, have it plugged in or not. As others mentioned, you can't overcharge the battery. It can be damaged a bit from heat, but of course the number one thing that's going to damage it is discharging it...so it's a no brainer-use it plugged in whenever possible, and try to charge it whenever possible when it's not plugged in.
    11-08-2010, 03:45 PM
      #10 (permalink)
    SP Forsythe 
    Notebook Evangelist
    Join Date: Jul 2007 
    Location: California
    Posts: 660
    Rep Power: 14
    Re: Is it safe to use MBP with screen lid closed? Leave charge on always?
    Quote: 
    Originally Posted by doh123
    1. Closing the cover will cause more heat. This is not because of covering the keyboard very much (though it does help some heat be retained). It's mainly because of the shape of the hinge and the fact when closed it covers up the back vent a lot more. For the best cooling, it is best to have the screen open. Just run it as a dual monitor, but make the external the Primary monitor, and if you don't want to use the built in, just turn its backlight off and don't use it.
    Nope. Apple would disagree with you on that one. Any "closure", which is, when compared to the amount of CFM, is insignificant. In fact, the opening size remains the same. it is only deflected at a slight angle when the lid is closed. Tilt your MBP and see. As well, shutting down the display lowers the heat being generated, even in the lower case. As I said, if it were a problem, Apple would not be selling stands designed to operate your unit in the closed position as the original poster of this thread proposes to do.
    Currently using:
    Apple MacBook Air 13" mid 2011 1.8GHz Core i7 4GB 256 GB SSD Lion & Ubuntu Linux via Fusion
    MacBook Air 11.6" late 2010 1.6 GHZ, 320M, 4GB 180 GB SSD Upgraded OWC), OS X Lion

  • I need an arrow or some sort of icon that points and moves to alert the website user to scroll down.  Are there such widgets or is there a method to make an image move on its own.  Also, how to get my muse webpage to automatically scroll down?

    I need an arrow or some sort of icon that points and moves to alert the website user to scroll down.  Are there such widgets or is there a method to make an image move on its own.  Also, how to get my muse webpage to automatically scroll down?

    Thank you for your help, but I believe my questions remains unanswered -- mainly, because my English isn't the good. 
    Here's what I am asking:
    1.  I need something that is animated that blinks or flashes to alert the viewer to scroll down the page.  I would put the wording:  Scroll Down for more (and then an arrow blinks or gently moves up and down to alert the user to move down).
    2.  is there a way that the entire homepage on it's own moves downward?
    Sorry for my poor English. 
           From: The Arthematics <[email protected]>
    To: preston reed <[email protected]>
    Sent: Tuesday, February 24, 2015 9:42 PM
    Subject:  I need an arrow or some sort of icon that points and moves to alert the website user to scroll down.  Are there such widgets or is there a method to make an image move on its own.  Also, how to get my muse webpage to automatically scroll down?
    I need an arrow or some sort of icon that points and moves to alert the website user to scroll down.  Are there such widgets or is there a method to make an image move on its own.  Also, how to get my muse webpage to automatically scroll down?
    created by The Arthematics in Help with using Adobe Muse CC - View the full discussionIf I understood correctly. You can place arrows on each section of the page and use "fade-in" and "fade-out". And maybe you want this widget Anchor + – Adobe Muse Widget Directory to automatically scroll down. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7227429#7227429 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7227429#7227429 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Help with using Adobe Muse CC by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • My MacBook Pro is running very hot after lion install.  Are there any hardware changes that will help? What can I do to get it back to normal?

    My MacBook Pro is running very hot after lion install.  Are there any hardware changes that will help? What can I do to get it back to normal?

    I get the impression that most of the users on older hardware experiences similar temperature issues on Lion for a long time now. Awaiting for confirmation from the original poster.
    In the meantime I'm just cautious with regards to pushing the machine to such extreme temps, since something tells me such behaviour which includes monitor flickering and the likes is nothing but abnormal for any type of use...
    Any clues if 10.7.5 does anything on this? If not I'm afraid i see myself going back to SL for good...

  • The share button disappeared from my Facebook add-on just before I upgraded to Firefox 5.0. I thought by upgrading and reinstalling the add-on it might come back, but it didn't. All other FB buttons are there, near as I can tell. Any ideas? I'm using XP3.

    The share button disappeared from my Facebook add-on just before I upgraded to Firefox 5.0. I thought that maybe by upgrading and reinstalling the add-on it might come back, but it didn't. All the other FB buttons are there, near as I can tell. Any ideas? I'm still using XP3.

    Hello,
    I had the same problem with finding this file.
    There's no such file in Mac OS X version of Skype. But there's a directory for your Skype user account in /Users/%current_user_name%/Library/Application Support/Skype/
    try:
    quitting Skype
    renaming old folder
    signing into the Skype

  • I have Quicktime 7 on my new MacBook Air running Yosemite 10.10.1 but would like to know if I can view or run my .mkv movies/files? Or are there any approved software that can run or view my .mkv files.  Thanks.

    I have a new MacBook Air running Yosemite 10.10.1 with Quicktime 7 but would like to know if I can view my .mkv files on Quicktime 7 or are there any approved software I can run that's safe for Yosemite 10.10.1.

    Hello kimosabe0731,
    Welcome to the Apple Support Communities! At this time, QuickTime does not support the playback of .mkv files. For more information, see the following resource:
    Media formats supported by QuickTime Player - Apple Support
    http://support.apple.com/en-us/HT201290
    Cheers,
    Matt M.

  • Are there any problems with motion menus and buttons in DVDSP 2 on OS 10.4?

    I have not used DVD Studio Pro 2 since upgrading to Tiger but it appears to no longer be showing moving motion on menus and buttons.
    Are there any problems that I should be aware of when using DVDSP2 on OS 10.4?
    I have not upgrade to a newer version only because I do not have any HD software to create DVDs.
    Thanks
    Paul

    New Discussions ReponsesThe new system for discussions asks that after you mark your question as Answered, you take the time to mark any posts that have aided you with the tag and he post that provided your answer with the
    tag. This not only gives points to the posters, but points anyone
    searching for answers to similar problems to the proper posts.
    If we use the forums properly they will work well...

  • The display on my macbook air has started flashing. are there any fixes i should try before sending it to apple?

    The display on my MacBook Air has recently started flashing.  Are there any fixes that I might try before sending it in for repair?

    The display on my MacBook Air has recently started flashing.  Are there any fixes that I might try before sending it in for repair?

  • After upgrading to the latest itunes, the text associated with syncing a device is gone.  The buttons are there but no text.  Also the toolbar for iTunes has disappeared.

    After upgrading to the latest editon iTunes, the text associated with syncing any device is gone.  The buttons are there but no text.  Also the toolbar for iTunes has disappeared.

    That's consistent with trouble with the Segoe UI fonts on your system.
    If you're using Windows XP or Windows Vista, try Vortical's technique from the following post:
    Re: iTunes 10.1 Missing Text
    But if you're using Windows 7, try itunesTRK's suggestion from the following post:
    menu bar invisible

  • Are there any new Macbook pro laptops coming out soon?

    Are there any new Macbook pro laptops coming out soon? Because if there are i will wait to buy one.

    Applecomputer53 wrote:
    Are there any new Macbook pro laptops coming out soon?
    There are always new MacBook Pro models coming out soon. However with current 2011 models you can install the faster, Rosetta program loving OS X Snow Leopard with a hack, instead of the new clitchy and unstable OS X Lion.
    So you have a choice now, but for not much longer. If you wait another 6 -8 months, Lion will be stable and more programs will be compatible with it.
    If this is your first Mac, I would wait. If you can do a simple hack with another Snow Leopard Mac, then you can opt to get one now and revert it to Snow Leopard and have a stable machine.
    Else take your chances with Lion.

  • Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive.  The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

    Dell U2412M as an external display for my MacBook Pro mid 2008, the clarity of fonts are absolutely unimpressive.  The settings do not detect the Dell U2412M (which is grayed out), are there any drivers that need to be installed ?

    I have posted this annoying Robles to bugreport.apple.com. Hope I can get locution (although Apple normally will not respond):
    On a software name Appfresh, it alerted me to update my MBPr 15 inches running latest OSX 10.8.2, with Chinese Word List Update 1.2. When I clicked on Software Pdate, app Store return No update available.
    My system have Chinese Word List Update 1.0 installed, and on October 5, 2012, Chinese Word List Update 1.1 was released by Apple, as alerted through AppFresh. However, this update never get updated on m system. I have to manually download chinesewordlistupdate.pkg from reviews.cnet.com/macfixit and install it manually. By doing so, I have Chinese Word List Update 1.1 on my system.
    The same problem occurred again today on November 5, 2012, where Chinese Word List Update is released by Apple. again, it fail to update from Software Update menu.
    Can you please:
    1. Explain why this problem occurred. This is so annoying.
    2. Advise me how can I get this Chinese Word List Date to update to version 1.2. Can you please send me the chinesewordlistupdate.pkg for version 1,2 so that I can manually install it on my system?
    3. How can I prevent similar problem with he subsequent version?
    Why Apple don't make this update standard as other update?
    Support please. Thank for response in advance

Maybe you are looking for

  • Xml error from PLSQL Generator

    Hello, I followed the instruction (http://download-east.oracle.com/docs/cd/B25221_04/portal.1013/b25601/pdg_pdk_plsql.htm#CHDCEJGB) and installed OC4J and PL/SQL Generator. When I use the sample provider.xml code with PL/SQL Generator, I received the

  • Images disappear when trying to mask

    When I try to make a clipping mask w/two objects (place objects, select both, create clipping mask), both disappear - they're still there, they just don't appear to be.

  • Firewire 800 Cables

    I have just changed from Mac Pro with SATA to an iMac i5 so am now trying to get the best from Firewire 800 with RAID0 and 5 drives I was using with SATA. What I noticed was that using a Lacie Flat Firewire 800 cable I was getting just 26Mb/s Read ti

  • MissingResourceException: Error parsing jdbcdrivers.xml

    java.io.IOException: Unable to resolve input source. Error: writeDomain() failed. Do dumpStack() to see details. Problem invoking WLST - Traceback (innermost last): File "D:\release\7420WLS\SCPO\weblogic\config\weblogic\setup\createManuWLSDomain.py",

  • Owb deployment error after sync

    Hi all, I have created one mappings 2 months back and i have validated,generated,depolyemnt and excuted also. upto now no issuses. data is populating as per requirment into target table. yesterday i have added one column in source and target after i