Macbook Pro 10.7.5 internet will not work. HELP!!! Ethernet and WIFI both say connected but still no internet.
I have a macbok pro running 10.7.5. My internet has always worked on it but I decided to try changing my router set up - the set up didn't work so I reverted back to the original setup that had previously worked.
Now, I have an Imac running tiger - I can connect to the internet via WIFI or Built In Ethernet with no problem.
When I try to connect to the internet on the Macbook Pro running osx 10.7.5 my internet will not work
Safari Says (You are not connected to the internet) and Google Chrome says (Page is Unavailbe) and lists some trouble shooting options that I tried.
When I go to System prefrences > Network my WIFI and Ethernet both say "Connected" and have a green light next to them.
I have tryed deleting the connections and starting new ones and I have even tried deleting the Location and starting a new one.
Nothing works - no matter what I do, even know the WIFI or ETHERNET says Connected, the internet will not work on the Macbook Pro.
The Internet works fine on my Imac and I have tried everything such as swaping cables but there doesn't seem to be a problem with my internet
or with my router - it all works fine with my Imac running Tiger.
Can anyone help me get my internet working on my Macbook Pro again? Any ideas?
Hello ASGR.SYS amd WahWar,
I tried both of your suggestions and neither of them worked.
ASGR SYS - When I tried it your way i got a message saying that the that the diagnostic couldn't repair the problem. It shows the thw WIFI, WIFI SETTINGS, NETWORK SETTINGS, ISP, all turn green. But the Internet and Sever stay red. The thing is, there is nothing wrong with my internet connection as I can connect to the internet on my Imac running tiger, both through ethernet and wireless. When I go to System Prefrences and Ntwork the WIFI and ETHERNET both say "Connected" even know I can't veiw any websites.suggestion
When I tried WAHWAR's suggestion I get a message that says cannot connect to the WIFI network and then it lists your typical trouble shooting tips. Like Make sure you entered the right password and make sure you are in range of the wireless network
Again, just to confoirm - My internet connection is working fne both the WIFI and the Ethernet. When I use it on my IMAC running tiger, everything connects as it should and it works perfectly. But when I try to connect with the MacBook Pro, Even know the connections in the Network settings window show up as "connected" the MacBook still seems to think that my internet connection isn't working at all.
I have tried creating new connections, creating new locations, and I have even gone as far to reset my router and start completely from scratch. The result so far has been the same - the IMAC running tiger will connect - my blackberry and iphone will connect - but the macbook pro running lion will not connect..
I'd apprechiate any other suggestions
Similar Messages
-
Alo, my Macbook pro i7 2 GHz Intel Core i7 (early 2011) will not go to sleep with the power source connected. only enters sleep mode when running on battery. Someone did this happen, and it could solve?
There is no output from that command line? Maybe the pid changed.
I'll repeat what I am trying to find out...
1. You do a pmset -g on the terminal.
2. The output from that pmset should have a line that says "sleep 0 (imposed by n)" where n is some number.
3. The ps ax | grep n is supposed to display what the process associated with n is.
It's the output from step 3 that should indicate what is causing you not to sleep.
But speaking of sleep, that's where I am going. -
Face time will not work to an ipad3 it just says connecting from our macbook pro
can you help it just says connecting but doesnt work what is going on????????
Are yo both using the same APple ID for FT (settings>FaceTime> You can be Reached At) anbd are you calling the other person using the the same email address or phone number that is listed there on both devices?
If so:
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
Otherwise:
iOS: Troubleshooting FaceTime -
My macbook pro with OS x Lion will not drag and drop files from finder or iTunes
My macbook pro with OS x Lion will not drag and drop files from finder or iTunes. Can anyone help?
Hi, I just have same problem.. I can't drag and drop file /folder.. please help.. I can drag the file/folder and move it , but I can't drop it after move it please help...!!!
It is happen just after I re-start my computer.. I tried to repair and anything but just don't work. Actually the old style one finger double tab and lock is much better rather the 3 fingers.
Please help to fix the drag and drop for file/folder/itunes. -
My MacBook Pro (OS 10.7.2) will not load some sellers websites that bounce through yahoo.
My MacBook Pro (OS 10.7.2) will not load some sellers websites that bounce through yahoo. Other Macs on same network work fine. I have reset Safari, tried other browsers, eliminated cookies..... to no avail. All computers running 10.7.2. I have reset Safari, tried other browsers, trashed out cookies. This has me baffled. My other macs running the same OS version work fine. Flash is up to date and have done the current software update. Any help please. I have not blocked any sites and am administator for all machines. I have tried signing in as Guest. Nothing works.
After searching other users questions with related problem, I found that VirusBarrier 6 was the issue. Reconfigured settings there and problem solved.
-
Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?
Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?
-
(MacBook pro 8,1) Firmware password will not reset. Resetting PRAM fails.
(MacBook pro 8,1) Firmware password will not reset. Resetting PRAM fails. Resetting NVRAM in Open Firmware fails. Resetting PMU fails. Any suggestions?
Not trying to circumvent any feature or security of the hardware. I am the owner of the hardware, I know the current firmware password. I am simply trying to turn off my current firmware password so that I may reset the PRAM to fix a failed OS install. The instructions to turn off the current firmware password should also include having to enter in the current firmware password as done on previous models with the boot CD. This feature was made available to all models because it is a security must have and it abides by industry-standard security procedures as stated in HIPPA and other ISO standards.
-
In my macbook pro hdmi, usb & SD card reader not working
In my macbook pro hdmi, usb & sc card reader not working.
i have tried the SRM reset done, till not working started.
Could you please resolve this problem,Welcome to Apple Support Communities
Simply take it to an Apple Store or reseller if it's in warranty. Your Mac will be repaired or replaced for free because it looks a hardware problem rather than a software issue.
If it's not in warranty, hold Command and R keys while your MacBook is starting up, and reinstall OS X. If it doesn't work, you can't do much more to solve the problem -
on my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop
Click on the Desktop. From the Finder menu select Preferences. Check the boxes for what you want on your Desktop. If they are already checked, then try unchecking and rechecking.
-
Yosemite on MacBook Air - Third time installed, now will not be startup disk. Disk Utility says OK. Disk Warrior says 375 pages of bad .plist files. How delete plist files?
What does "Accessibility" mean?Had the same problem, finally realized that the FileVault Encryption was struck at 19%. Speed back up to normal after I disabled FileVault using terminal command - sudo fdesetup diable
To check whether the FileVault is the culprit, go to System Preferences --> Security & Privacy --> FileVault to see if encryption is in progress.. For me the blue bar was less than a quarter with status 'estimating time remaining'..
Then open Terminal and type in: sudo fdesetup disable
It will then ask for the admin password (to be it asked twice), then it was disabled... Back to normal life again..
Here is my terminal log for reference:
Last login: Tue Oct 21 23:05:13 on console
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is On.
Encryption in progress: Percent completed = 18.80
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is On.
Encryption in progress: Percent completed = 18.80
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is On.
Encryption in progress: Percent completed = 18.80
Gowthams-MBP:~ asgowtham$ sudo fdesetup disable
Password:
Enter a password for '/':
..fdes.
FileVault has been disabled.
Gowthams-MBP:~ asgowtham$ fdesetup status
FileVault is Off. -
If i download the new OS X Mountain Lion to my Macbook Pro that has Snow Leopard, will i lose my apps and downloads (such as: Microsoft word, powerpoint, excel, oovoo, skype) and will i lose all of my pictures/documents and information?
I should just change the OS and leave all your apps and data alone. That said, if any of your apps are old and use Rosetta (ppc apps), they won't run under Mountain Lion.
Make sure you take a good Time Machine or Clone backup before you convert.
You can check compatibility of your apps here:
http://roaringapps.com/apps:table -
MacBook Pro Late 2011 : Optical Disk Drive not working?
MacBook Pro Late 2011 : Optical Disk Drive not working?
When i try to a put in a cd or dvd; it rejects it automatically within 10-15 seconds.
I have resetted SMC and PRAM; no chages.
Don't know what to do. Please help.
Thank you.Clean the heads.
check to see if it is under warranty.
buy external DVD/CD rw -
How do I transfer music from my macbook pro to my iPhone?
I bought a physical album and loaded to my mac but it won't sync to my iPhone.I have plugged my iPhone into my mac and when i try yo drag the music over to sync to my phone it says that it has synced but ill look at my music library on my phone and the music won't be there. am i doing something wrong?
-
I upgraded to Mountain Lion yesterday, but since doing so I find that my 1Password app will not work. I have checked for 1Password updates but there are none. Is there a compatibility issue
Hmmm...I'm using 1Password Version 3.8.20 (build 31499) with a fresh install (scrape and pave) of Mt. Lion on my iMac and it's working fine.
I use Dropbox to sync 1Password so for my fresh install I simply downloaded 1Password from Agilbits website and installed it.
Have you tried reinstalling 1Password? Depending on how you purchased it, download it from their website or from the Mac App store to reinstall/replace it. (IIRC v3.8.x comes directly from Agilbits and v3.9 from the Mac App store.) You shouldn't have to uninstall it, the new download should overwrite the existing copy.
As with anything else, be sure to run a backup first!
More here:
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/17861-finding-existing-data-file-when-reinstalling-1password
http://support.agilebits.com/discussions/1password-in-mac-app-store/3377-how-to- reinstall
http://support.agilebits.com/discussions/1password-38-for-mac-from-agilebits-web site/13769-reinstall
http://support.agilebits.com/discussions/1password-in-mac-app-store/2394-reinsta lling-1-password
Hope that helps.
D'oh! Mende1 beat me to it! -
I turned off the power to my apple tv whilst updating and now it will not work, i have tried to restore using usb but it says unable to find. any help please?
Welcome to the Apple Community.
Are you following these instructions.
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.
Maybe you are looking for
-
I found out after the install of LION, that it does not support Rosetta, which runs Quicken and the classic AOL software and a myriad of other apps. Can I go back to Snow Leopard? Is there a way to retrieve my thousands of saved E mails, which are sa
-
OpenSQLException: JDBC driver not supported?
Hi @ all, I need to connect to a DataSource with the WebAS 7 via SQLJ. As I try to connect to it with the SQL Engine set to "Vendor SQL" I get: "The given connection "com.sap.engine.services.dbpool.cci.ConnectionHandle" is not an Open SQL connection"
-
Hitting error when post goods receipt in MIGO
Dear SAP Gurus and Expert Kindly advice what config or setting need to be done when the post good receipt in MIGO hit the error of "Acct. 81110140 for trans. /ev. key ANL, is not a control account". Thank you Regards Leonard Tan
-
[disappeared]After update, scroll function changed. Want the old paradigm back.
Laptop: Dell Inspiron 1545 OS: Kubuntu 13.04 Firefox: 24 Mozilla Firefox for Ubuntu canonical 1.0 What I have now: I press the arrow keys on the laptop (these are dedicated arrow keys, not multifunction keys), and the whole screen slams to the bottom
-
I have a static method which takes a few String and double parameters and contains only local variables. When it is called by multiple threads there seems to be an exception thrown intermittenly. I got a little paranoid and so I've changed it to an i