Macbook Pro 15" USB PORT DOESN'T RECOGNIZE ANY DEVICE.

I got my macbook pro 15" for about 1 year and 2 weeks ago, when I turned on my macbook and put my mouse ( Death Adder) into the USB PORT, my macbook DOESN'T RECOGNIZE IT. There are 2 usb ports on my macbook, I tried both port and there was only one port work correctly, the other one didn't work at all, I also tried to put my memory stick, external hard drive, vodafone 3g usb, ipod,....into that USB PORT but non of them worked. Is there any one here have the same problem???? Can you guy help me please. I stay quite far away from Apple Store so it is hard to bring it to repair. I tried to reset SMC, Update Software,...but still not work...HELP ME PLEASE...

I can't fault your troubleshooting. Sounds like a bad port.
Home remedies are limited. You can grab a magnifier and shine a flashlight in there. If you see any foreign material, use a toothpick or other non-conductive tool to extract it. If you can, give it a good blast of (dry, canned) compressed air to blow any particles loose.
Sometimes you can trick a flaky USB port into working at least intermittently by plugging in an extension cable or right-angle connector. Play with a device that lights up so it's easy to see whether it's working.
Take a hard look inside the connectors at the end of your Death Adder and other frequently-used devices. If you see any corrosion or bent pins, that's what damaged your USB port.
If the port requires physical repair, it's best to use Apple or an authorized dealer because if they make things worse while trying to fix it, they have to make it right. Joe's Appliance isn't similarly accountable.
If you need more USB ports, ExpressCard to USB adapters are dirt cheap.
Good luck.

Similar Messages

  • My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

    My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

    I'd start by looking in system profiler.
    the blue Apple icon > About this Mac > More info...
    goto the hardware section. Scroll down and click on  USB
    See what happens when you have the device plugged in & not plugged in.
    Move keyboard & mouse around to verify that ports work. Plug device in a port that worked with keyboar or mouse.  Keyboard usb ports are rather low power.
    Perhaps device is taking too much power.  Are devices power or unpowered?  Try connecting devices to a usb hub.
    Which mac do you have?
    What iMac do you have?
    Report system info
    Blue apple > about this Mac
    click on more info
    click on hardware
    do not copy your serial number

  • My USB ports won't recognize any devices. Thoughts?

    I am still using Mountain Lion, and I have been warned about updating. My USB ports will not recognize or connect to any external devices. Any thoughts?

    Try resetting the SMC. Use the procedure for "a battery you should not remove yourself".
    http://support.apple.com/kb/ht3964

  • I upgraded my iTunes to 10.7 on my MacBook Pro - after that iTunes doesn't recognize my iPhone 4S 6.0.1 (10A523) in the iTunes sidebar. Solutions?

    I upgraded my iTunes to 10.7 on my MacBook Pro - after that iTunes doesn't recognize my iPhone 4S 6.0.1 (10A523) in the iTunes sidebar. Solutions?
    (Both upgrades to the phone and lap-top were done based on Apples suggestion, so I find it strange it doesn't work automatically, which should be a basic reason for choosing Apples costly products!)

    Try rebooting your computer.
    You might also try downloading and installing iTunes 11 which came out today.

  • TS2634 When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

    Well ... the charger is the original charger and just checked and confirmed it is a 5.1V charger. How come? Next is why when i connect my iPad via original usb cable, no response from macbook pro? used to sync with iTunes now totally dead.

  • When I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

    when I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

    Please confirm what version of OS X you are running - I doubt it is the ancient OS 10.1 !

  • Late 2011 MacBook Pro; one USB port not recognising anything

    Hi,
    I've had my MacBook Pro since January 2012, so I believe it is the late 2011 13" model. I'm currently running OSX 10.9 although the problem I've been having has been going on around 3 or 4 months, I think I had OSX 10.7 installed when the problem started.
    One of the USB ports on my Mac (the one on the left when looking at them face on) is not recognising my external hard drives, or recognising/charging my iPhone when plugged into the USB. The other USB slot works fine and recognises external hard drives, however when I insert the hard drive into the faulty USB input, although the hard drive lights up and starts whirring as if it is ready to start functioning, it does not appear under the 'Devices' tab of the Finder screen, but does appear and function when using the other port.
    Similarly, when I plug my iPhone 5 into the faulty port it is not recognised/does not start charging, however if I leave it running and come back later I often have at least a level of increased battery life which suggests that it does intermittently charge from time to time, and again it functions normally when using the fully functional port.
    I've tried the NVRAM reset as I have read in another post but to no avail. Is this likely to be a mechanical fault over a software problem, and if so what could be wrong with it?
    Thanks for the help in advance.

    thank you shootist, at least now I know the problem is as serious as I dreaded, but will not loose hope waiting for a miracle and the port works again

  • Macbook Pro First USB port ejecting things

    ok so my brand new(mum bought it late Nov. didn't start using it until christmas) macbook pro's first usb port (closest to person using it) will eject anything that is put into it when you try to put something into it what can i do to fix this? should i take it to apple? since its new and i can call them and such during this month?

    Does this happen with USB flash drives too, or only with hard drives? Have you had it happen with more than one hard drive, or just one?

  • Brand new Macbook pro one USB port stopped working

    Brand new Macbook Pro 15 with Retina display. One of the USB ports stopped working after 24hours.

    Serial Port Configuration and Port definition is reset by
    NVRAM  http://support.apple.com/kb/ht1379
    If no good I would return the machine ASAP:
    Genius reservation http://www.apple.com/retail/geniusbar/
    check warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • My MacBook Pro's USB ports will not work. Is there anything I can do to fix this?

    I bought it in late May of '12.  The USB ports stopped working a couple of months after I bought the computer. I did not spill anything on it or drop it.  I went in and had them fix it and they worked for about a month.  They will work occasionally and it takes me removing and entering the USB connector multiple times before it recognizes that anything is there.  The computer is no longer under warranty and I don't want to have to pay a bunch of money to have it fixed.  Is there anything that I can do to fix this or am I going to have to have someone else do it.

    Maybe a PRAM reset will work:
    http://support.apple.com/kb/ht1379
    If there is no change, bring the MBP to an Apple store genius bar for a free evaluation.  Bring the recalcitrant devices with you.  This should at least determine exactly where the fault lies, with the MBP or the externals.  Any repair costs quoted you may accept or reject.
    Ciao.

  • Macbook Pro right USB port disconnects

    Hi - When using the dialup modem adapter in the right USB port it will disconnect after 3-4 minutes but works fine in the left port. Flash drives & scanner seem to work OK in the right.
    Also, a friend has computerized embroidery sewing machine and the right port does not recognized it but the left does on her MAC.
    Are Macs were bought a couple weeks apart.
    Is there a setting for each USB port that maybe wrong or is this just a defect?

    Well, does that link...
    http://lists.apple.com/archives/Usb/2006/Oct/msg00052.html
    still lock up your Mac? No way it should have any such effect.

  • Restoring Your Nano When The USB Port No Longer Recognizes The Device

    I can't say for certain if its coincidental or not but as soon as the latest update of v9 for iTunes came out, my computer stopped recognizing my iPod (1st Gen Nano) through all the USB ports.
    First, I tried the Nano on a different computer with Windows Vista but the the latest version of iTunes had also been updated on that machine. The laptop also would not recognize the device through any of the USB ports.
    Second, I switched cables. Same problem.
    Third, I reset the device. Same problem.
    Fourth, I tried to update the drivers on the device manager. Same problem.
    Fifth, I uninstalled iTunes per Apple's uninstall instructions and that was to no effect.
    Now my last option is to restore the device, however because I can't get it to be recongized on any computer I own- I don't know how to do this? Do I take it to an Apple store? Is there a manual way to restore the device to factory settings since every computer I have access to won't recognize the device?
    Thanks!

    I have exactly the same problem. After updated to the latest version of iTunes 10, my 5th gen ipod stopped being recognized by my Windows 7 Computer.
    I've tried:
    1. Un/reinstalling Itunes 10, then updating to 10.1 or whatever was the latest one as of 9/30/10.
    2. Using a different iPod USB cable to connect to the computer.
    3. Using a different USB port.
    4. Trying the iPod on multiple computers.
    5. Manually selecting the driver within Device Mananger in Windows 7 from "Unknown USB Device" to "Apple USB iPod Driver".
    6. Restarting my computer, multiple times.
    7. Resetting my ipod "Menu+Select buttons for 6-10 seconds"
    From what I understand I could resolve this problem by restoring the iPod to its factory settings, but since I can't get it to be recognized in a computer I am stumped.
    This will be my third iPod in 4 years that has crapped out (out of warranty of course) If I can't get this fixed I'm buying a Zune.

  • MacBook no longer recognizes any devices that require the USB port (mouse, iPod, etc.)

    After doing my latest software update, my MacBook no longer recognizes any devices that require the USB port (mouse, iPod, etc.).  I've restarted the computer and that didn't help.  Any thoughts on what to try?  (I've already restarted the computer.)

    Try using the procedures in this article to eject the disk.
    Best of luck.

  • MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is

    MacBook Pro i5 with retina will not recognize WD Passport even though I successfully used it to transfer programs and files from my older MacBook ten days ago. It receives power from the USB, but when using Time Machine I receive the message that there is not an external device connected.

    If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
    Please tell us more about the modem if the above gives you issues.

  • My USB port doesn't detect my external hard drive. What could be wrong? (WD My Passport for Mac)

    My Passport for Mac originally worked and I was easily able to download files. It even worked on my MacBook Pro. Now, when I attach this external hard drive and open Finder, the external drive is not there. I've run Disk Utility. I've shut down, hit alt+command+p+r and still, the USB port does not recognize the external drive. Can anyone help.
    I don't know if this started after I had problems with a virus (Trojan) and I used MacKeeper AND Sophos AND MacBooster to try to "clean up" the virus. I delete the viruses (8 of them from email), and they come back with another check. This makes me wonder what is the best antivirus software!
    Thanks for anyone's help!

    Even though it is dated, check through the steps discussed in this thread: https://discussions.apple.com/thread/1126326
    When you restarted the Mac, did you connect the WD drive while the Mac was shutdown, make sure the drive was powered if it has an external power supply, and then start the Mac?  I always turn on all external components before powering up the MacBook Pro or iMac.

Maybe you are looking for

  • How to get promoted properties from Request to Response in two way send port scenario.

    I have a requirement to access the promotes properties in response pipeline, these promoted properties are promoted in Orchestration and they are available in Send pipeline, but not available in Receive pipeline. Please help us if we have any solutio

  • How to enable the check box using cl_salv_table?

    Hi Experts,              what code will change for to enable the check box in the following Report program? REPORT  ZMA_ALV_OOPS2. TABLES:MARA. TYPES:BEGIN OF T_MARA,       SEL   TYPE C,       MATNR TYPE MARA-MATNR,       WERKS TYPE MARC-WERKS,      

  • Database Crash

    Hi All, Oracle Version : 9.2.0.4 Linux O/S This problem has been occurring every second day for the past few weeks! Some background process (suspect backups) is shutting down the oracle instances one at a time for half the day during business hours.

  • Avoid Temp Tables

    Hi All, We are in process of getting ride of the TEmproary tables. As usual DBAS are giving hard time. Please see these After paramters form Trigger. It creates atable TEMP_SERVICES .Can I avoid the table. Can I do the calcuations in PL/sql. Please h

  • Vendor Warranty

    Hi all, There is a scenario where a company receives complaints from a customer post project execution. It is a manufacturing co. where some items are inhouse manufactured and some are supplied by vendor. On the vendor supplied items, there is a back