Macbook pro 2007

I have an older macbook pro 2007 and imac intel 2006 model. What if any issues should I be aware of if I upgrade to Lion and what will not work with my computers. So far, I have read that my Microsoft office 2004 will not work and possibly my wireless HP printer that is at least 4 years old.

Any PowerPC apps will not work. Open System Profiler, select Applications from the Software section. Look for PowerPC in the Kind column.
Additionally, check for other software compatibilities here: http://roaringapps.com/apps:table
For Printer compatibility, check here: http://support.apple.com/kb/HT3669

Similar Messages

Problem with battery for MacBook Pro 2007

I have a problem with battery that was replaced during video card service 1.5 years ago
Battery health was around 80% and it stopped to work, I continued to use notebook with power cable and after week the battery become like this!
spoke with person in Apple store and got answer that it is not covered by Apple and I will need to buy another new battery.
For me it looks like manufacturing problem and I'm not expecting that after 1 year my battery will die like this! Thanks that it didn't explode!
What I should do in such case?

Thanks for your reply!
All my battery story is ending with bad taste...
I always relied on quality of the Apple products, it brought me to change all computers and phones to Apple brand. I was ready to pay extra for their products...
This battery has an Apple brand on it and I'm expecting that Apple will take some responsibility for it.
First battery on my MacBook Pro 2007 worked without any problem for 4 years, then it was replaced by Apple service tech person for unknown reason. This "new" battery failed just after ending of 1 year warranty coverage and even deformed in such scarry way. And now I don't have any option to ask if there is possibility that I'm experience a manufacturing defect! And I know that it is possible, internet is full of negative comments for these batteries!
Now I'm asking myself again, if it worst to buy Apple products? Are these products have proper quality?

Macbook Pro 2007 - Do I need original disks to install OS or can I install 10.6 dmg from USB?

Hi,
I recently bought a Macbook Pro 2007 and admittedly coming from Windows I am a relative novice with Macs. So, I made a purchase without realizing the important role the original OS disks play
I checked the OS and it says it is running OS X 10.5.8. I had a go at installing a different OS on a partition, but got an error message saying: "Filesystem verify or repair failed".
So, not being all that familiar with Macs, how do I go about installing a new OS? I am pretty clueless with that stuff on the Mac. Do I need to have the original OS disks in order to install a more recent OS? Or can I use the 10.6 dmg file that I have to install from a USB?
If I were to purchase a more recent OS (than the one that came originally with the Mac), would I be able to install that? In all cases I do not need to back up any of the existing data.
Any feedback would be much appreciated.
Thank

If you want to erase the computer's hard drive to rid it of the previous owner's leavings (always a good idea with a used computer), and then install Snow Leopard, that should all go without a hitch. The present Leopard installation will be wiped along with everything else. But the iLife applications that were preinstalled on the machine at the factory and included on the discs that were originally shipped with it are not part of the OS and won't be included in the Snow Leopard installation. You'll need to purchase and reinstall those separately, and you can do so either by buying an iLife '11 installer DVD from an Apple Store, or by buying the individual iLife apps that you want from the Mac App Store. You'll have access to the App Store after applying the free OS updates to the final version of Snow Leopard, v. 10.6.8.
Once you can use the App Store, you'll also have the option of downloading the upgrade to OSX Lion, if your computer meets its system requirements.

Can I take a hard drive from a different laptop and replace it in my MacBook pro 2007

My MacBook pro (2007) has failing hard drive. Can I remove the hard drive from a different laptop ie. Toshiba, or HP and replace it with the failing hard drive?

yes you can....but any files/data on the other drive will be gone. also make sure that the drive you install is a SATA drive which is in your Macbook...
make sure you have your original install disk if you plan on doing a clean install.

What is a good solid state hard drive for a Macbook Pro (2007 model)?

What is a good solid state hard drive for a Macbook Pro (2007 model)? I imagine they're still expensive, but I'm curious which would be good picks if I were to go for it.

I am using the Corsair P256 (256 GB) SSD. It is actually a Samsung drive. It works well, but will only give you part of the speed advantage due to the fact that the MBP from 2007 only has a 1.5 GB/s interface, while newer MBPs have a 3.0 GB/s interface.
Impact on battery run time seems to only be an increase of 15-20%.
Boot time on my MBP is 40 seconds to login prompt. System seems very responsive.

Hi, i got Macbook Pro 2007, OS X 10.5.8, I would like to update my system, which one I should choose? tks

hi, i got Macbook Pro 2007, OS X 10.5.8, I would like to update my system, which one I should choose? tks

Mountain Lion is the current version of the latest OS, with Mavericks coming this fall.
However, I would suggest that you simply upgrade to Snow Leopard -> http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard. It's a very good, very fast OS and, best of all, it can still run those PPC apps that you may be using.
My 2¢...
Clinton

I have a MacBook Pro 2007 and I installed Mac OS 10.6 but I lost power in the process and now the mac doesn't recognize my hard drive

I have a MacBook Pro 2007 and I installed Mac OS 10.6 but I lost power in the process and now the mac doesn't recognize my hard drive, how can I fix this

I've tried it but since I'm using a USB disk drive it keeps freezing up or showing you a folder blinking folder with a question mark. (?). When I start the mac up I hold the control button until the Mac OS install disk shows up. My hard drive doesn't show up anymore. Is there any other button I have to hold down to bring a different menu up. I have also tried to boot up holding control and C and nothing happens. Thanks for the help so far

MacBook Pro(2007) won't shut down completely

MacBook Pro(2007)-Leopard
When I go to shut down the computer, I click on the shut down now or just let it do it's own thing, and everything is fine until it gets to the part where I get the spinning gear cirlce.
It just keeps going and going and going....until I have to force the computer to shut down by pressing the power button.
Unless I reboot and shut down again(usually works second time), the computer will not come on when it is scheduled to in the AM.

Make sure you quit out of all programs prior to shuting down if you have not done so.
Boot up from your install DVD and run "Repair Disk" from the Utility menu.

MacBook Pro 2007 battery not recognized, not charging but working

I recently bought a new battery for my MacBook Pro 2007. As said in the title, it seems to work alright, but it's not recognized by the computer (X in the battery icon), and I don't think it's charging.
I tried to reset the SMC, no change. Unfortunately, I don't have any other computer to test my battery and my powercord on, to see if it's coming from either one of them. And I don't have an Apple Store around.
Do you have any suggestions ?

MacBook, MacBook Pro, MacBook Air: Battery not recognized after being fully drained

Top right hand of task bar icons keep disappearing and coming back. I cannot click on any of them as they just go. Also I cannot take screenshots any more. Macbook pro 2007 OSX Snow Leopard

Top right hand of task bar icons keep disappearing and coming back. I cannot click on any of them as they just go. Also I cannot take screenshots any more. Macbook pro 2007 OSX Snow Leopard. Anybody any idea what is occurring?

These Steps should resolve your issue
Step by Step to fix your Mac
If you don't have a backup of your data off the machine
Most commonly used backup methods
If you can't boot the machine and need to get data off it
Create a data recovery/undelete external boot drive
Your options for data recovery
My computer is dead, is my personal data lost?
Secure data removal
How do I securely delete data from the machine?
More:
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents#/

MacBook Pro 2007, black screen...

Hey, I've got a MacBook Pro 2007 edition, and it's in immaculate condition, the other night I put the lid down, went to bed, got up, and now it won't do anything. The computer is on, it chimed, keyboard is illuminated, tried clearing the PRAM. But it doesn't work. The apple logo doesn't illuminate, nor does the webcam green light. Any hints?

Hey Macbiv!
Here is an article that will help you troubleshoot this issue:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

MacBook Pro (2007) is running dangerously hot!

The MacBook Pro (2007 model with 17" screen) keeps running hot when I'm not doing much on it. The fans run around 5500RPM. Just recently, I tried running some big apps on it, so it was using the CPU a lot, and the CPU went to 221˚F (above boiling point!).
The laptop is on a flat, hard surface with plenty of ventalation. I tried propping the back up with an old cellphone, and that helped reduce the temperature a bit but did not fix the problem. Of course, I checked Activity Monitor (and iStat Menus) to verify that the CPU was not being used a lot (<10%) when I was not doing much on it. The ambient temperature is not very high (around 70˚F). I checked the vents, and they are dust-free.
The battery has already exploded in the past, and I had to replace it. That was probably caused by this heat problem. Does anyone know why this could be happening or how I can fix it?

Make a "Genius" appointment at an Apple Store to have the machine tested.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros (do this only if you have at least two complete, independent backups, and you know how to restore to bare metal from any of them.) Don’t erase the Lion recovery partition, if present.

Formatting Macbook Pro 2007-2008

Hello,
I am tring to format my macbook pro 2007-2008 (the black one) and i did all the setps but now i have to re-install osx lion but when i go to sign in with my apple id it says i need to use an apple id that already baught lion any advice on how to do this.

You will need to get, if don't have one, a Snow Leopard DVD:
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Do the following to install:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You can then upgrade further depending upon the model you have:
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.

MacBook Pro 2007 years

Hello!
I have a MacBook Pro 2007 year
Tell me please
1. Maximum exact amount of RAM for this laptop
2. I must install 667 Mgz DDR2 SDRAM ore i can install 800 Mgz DRR2 SDRAM
Thanks!
Sorry for my bad english

There are a couple models that were available in 2007. They both use/require 667mHz RAM, But their maximum quantity differ.
Introduced     October 2006
Discontinued     June 2007
Model Identifier     MacBookPro2,2
Model Number     A1211
Maximum Memory     3.0 GB (4.0 GB can be installed, only 3.0 GB will be addressed)
Memory Slots     2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
Introduced     June 2007
Discontinued     February 2008
Model Identifier     MacBookPro3,1
Model Number     A1226
Maximum Memory     6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots     2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM

Windows 7 auf einen MacBook Pro 2007

Windows 7 auf einen MacBook Pro 2007
Ich will das per BootCamp installieren.
Wenn die Windows DVD geladen wird kommt in ein schwarzes Fenster.
1.
2.
CD auswählen?
Der MacBook Pro hat nur ein CD-Laufwerk. Keine Taste ist einzugeben.
Was mach ich ?
Gruß NewGEOS

Ich habe eine Lösung gefunden. Durch MacTechNews.de
64 Bit Windows 7 geht nicht, aber 32 Bit Windows 7.
Gruss NewGEOS

Macbook pro 2007

Similar Messages

Maybe you are looking for