Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Similar Messages

  • MacBook Pro 13-inc, keyboard backlight does not work

    My keyboard backligth does not work.
    I have a MacBook Pro 13-inch, early 2011 with MAC OS X Lion 10.7.3.
    I already set the preferences to be on in autmatic mode with low ligth on but this did not work.
    When I turn on the computer the keyboar lights on but as soon as the computer finish the log on the keyboard goes off.
    I will appreciatte any advise.

    Powerplan works great!

  • Just installed Office 2011 on my MacBook Pro Retina and now Safari does not work

    Just installed Micro Office 2011 on my 13" MacBook Retina and now Safari is not working correctly. Pages load very slowly or not at all.
    Any idea of what's wrong?
    Thanks

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Macbook Pro 15 (2012) trackpad scrolling does not work right

    The trackpad on my Macbook Pro has been acting up a bit lately, whenever I am scrolling through a webpage, using the two finger gesture, it seems to think I am swiping left or right, to go back or forward pages, instead of just going up and down the page. Is there any way to maybe recalibrate the trackpad or anything? any tips are very appreciated, as I have tried all i can think of up to this point.

    Hi rbarnes1121,
    Welcome to the Apple Support Communities!
    From what I understand, your trackpad on you MacBook Pro can be erratic and perform commands that you are not meaning for it to perform. In this situation, I would recommend reading over the attached article to help troubleshoot this situation.
    Trackpad or Magic Trackpad is jumpy or erratic - Apple Support
    Have a great day,
    Joe

  • IPhone 4 blacks out, could not work with just pressing the home button and lock screen button, only worked when I plugged it in the charger

    My iPhone 4 started to blackout out of nowhere and it wont work only until I plugged my phone into the charger. It has been going on for several times in a day, where it just randomly blacks out. Do anyone know what is the problem and how do I exactly fix this? thanks

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Macbook pro w/ 24" cinema display does not work in bootcamp windows 7 - any solutions out there?

    I am running bootcamp with windows 7 to be able to access some autodesk software.  Once I'm in the windows environment I can no longer use my 24" cinema display.  Is this a driver issue, video card, any ideas on how to make this function, I really need to display real estate.

    I know this is an old post, but did you ever find a solution for this? I just installed Windows 7 through Boot Camp and bought an older 20" Cinema Display (M9177LL/A); the display works wonderfully on the Mac side, but I can't get it to register in Windows. This isn't the brightness issue that I see a lot of people have, I don't see a way to use the display at all.

  • Tecra M4: TV s-video out does not work with Vista

    I have windows vista ultimate on Tecra m4.
    I tried to get tv out through s-video but nothing happened.
    I tried fn+f5 but it shows only Lcd choice with no other choices.
    While it works good with windows xp tablet edition I installed the newest driver offered by toshiba but nothing happened.
    The same problem is still here; no tv out.
    Can any one help me

    Hi
    As far as I know the Vista drivers are not available for the Tecra M4 at this time.
    I have checked the Vista driver download site and the M4 is not listed.
    I think you have to wait for compatible drivers
    If you install the graphic driver, you should check the Nvidia display settings. There you could choose between the TV, analogue display and digital flat display.
    There choose TV and configure it via device settings

  • Print to Video does not work with Firewire 800 to 400 cable

    I need to print video from a Mac Pro with only Firewire 800 port to a Sony DSR 50 with only Firewire 400 port. I'm using a Firewire 800 to 400 cable and I also tried a 400 cable with a 400 to 800 adapter attached. I'm able to control the Sony deck but I cannot get any audio/video to it.
    Anyone else have this problem?

    When you've got the deck connected and in fcp you go to  view:  videoplayback, do you see the appropriate apple firewire option available and chosen?  And if you hit command-F12 (show all frames) do you see anything?  If it doesn't work, try restarting the computer with the deck remaining on.

  • HT4183 The "Trust" setting does not work with 10.8.2, even openssl s_client -connect ...:636 returned CONNECTED(00000003) verify return:1

    even openssl s_client -connect ...:636 returned
    CONNECTED(00000003)
    verify return:1
    No client certificate CA names sent
    SSL handshake has read 1518 bytes and written 456 bytes
    New, TLSv1/SSLv3, Cipher is AES256-SHA
    Server public key is 2048 bit
    Secure Renegotiation IS supported
    Compression: NONE
    Expansion: NONE
    SSL-Session:
        Protocol  : TLSv1
        Cipher    : AES256-SHA
    Key-Arg   : None
        Start Time: 1363044139
        Timeout   : 300 (sec)
        Verify return code: 0 (ok)
    Connect to OD without SSL works fine.
    Anybody else?
    Henri

    Hi,
    here are some more informations about the problem.
    The root CA certificate is imported as trusted in the system keychain of the server and the client. A certificate evaluation returns "valid certificates, trusted ...".
    The client bind fails with this messages, e.g. Kerio Control is able the use LDAPS, so it seams just the problem with the trustability of the certificates. Keychain trusts the certificates, OD client bind not, this is not so consistent.
    Any idee?
    Thanks
    Henri
    2013-03-14 19:39:02.776804 CET - Trigger - notified opendirectoryd:nodes;lastServerChanged;/LDAPv3/ldaps://macpro....:636
    2013-03-14 19:39:02.793467 CET - 71825.330426.330427, Module: AppleODClientLDAP - unable to create connection to LDAP server - ldap_search_ext_s for the ro
    otDSE failed with error 'server connection failed' (-1) error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed (self signed cert
    ificate in certificate chain)
    2013-03-14 19:39:02.793501 CE
    CONNECTED(00000003)
    depth=1 /C=DE/...
    Certificate chain
    0 s:/CN=macpro...
       i:/C=DE//OU=IT/CN=*.office.../emailAddress=admin@...
    verify error:num=19:self signed certificate in certificate chain
    verify return:0

  • Require Logon Using Secure Password Authentication does not work with plaintextlogin on the server side

    Hi All ;
    We are in the middle of a migration Project but we stuck with this pop3 setting. Most of the mailboxes uses pop3 to connect Exchange 2010 with the setting spa + port 110 on the client side. We want to give same authentication options for the pop3 settings
    on 2013 side but when spa is selected the pop3 rejects the connection with the following error.
    Your e-mail server rejected your login with SPA.
    So both settings for pop3 protocol is same but the client cannot connect from 2013 server.
    Where can i enable this feature from Exchange 2013 .

    Hi,
    Please make sure that we have enabled Outlook Anywhere and 2 pop3 services in Exchange 2013.
    More details in the following article:
    Enable POP3 in Exchange 2013
    http://technet.microsoft.com/en-us/library/bb124934(v=exchg.150).aspx
    Please make sure port 110, port 587, port 25 are available.
    Please try to disable the NTLM authentication on Exchange 2013 server for testing.
    Please also try to run Outlook client under safe mode to avoid some AVs and add-ins.
    Please also try to re-create new profile to refresh the caches for testing.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • New Applications model DOES NOT work with StandAlone OSD media

    If you are able to create StandAlone OSD media, the new Applications model DOES NOT work with it.
    - The creation of the media will be successful
    - The application installation itself will be successful
    Yet after the application is installed, it shows the correct process it needs to complete based on the return code in AppEnforce log, but does not process that information back to the the TS Manager so it appears to attempt to download a policy which fails
    causing the task sequence to error out..
    Thanks,
    Squirre1

    It is very similar to this description:
    http://madluka.wordpress.com/2012/05/15/error-0x8000405-when-installing-applications-to-a-workgroup-system-during-build-and-capture-task-sequence/
    It is using the application model, since it is not attached to the domain it is on a workgroup. But it is on standalone media and not during a build and capture sequence, it is during an OSD. But alot of the same puzzle pieces fit. Basically pointing to
    the new applications model not working during standalone OSD when the MP is not available. i would say that not enough information is getting encapsulated into the Application when exported onto the StandAlone media.

  • External USB HD does not work with HAL:

    External USB HD does not work with HAL:
    From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive  does not woks.
    But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
    I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
    My fat32 usb-stick works without any problem.
    If I try to open the device with KDE it appears an error popup wit this message:
    TODO: have to rethink extra options
    Error: kio_media_mount_helper
    The log from the kernel.log is
    Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
    Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
    Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
    Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
    Nov 6 22:03:17 myhost usb-storage: device found at 4
    Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
    Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
    Nov 6 22:03:17 myhost USB Mass Storage support registered.
    Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Nov 6 22:03:22 myhost sdb: sdb1
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
    Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
    Nov 6 22:03:22 myhost usb-storage: device scan complete
    and the error.log is
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
    Do you have some idea ....
    Bye.

    I have done the following:
    Downloaded the patched hal version.
    used makepkg in /abs/local/trunk/ to create a pkg for pacman
    used sudo pacman -U pkgname to install it.
    used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
    saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
    have i done something wrong?
    br fjodork
    WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
    So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
    pacman -Rd hal
    it will give you some warning about the dependencies, ignore  it since we are reinstalling hal in a few steps.
    First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
    So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
    unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
    at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
    installed, i guess there were issues with paths. anyway read on
    Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
    makedepends=('pkgconfig' 'gperf')
    options=('!libtool')
    install=hal.install
    source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
        hal
        hal-policy.patch
        cryptsetup_location.patch
        hal-0.5.9-hide-diagnostic.patch
        ntfs3g-valid-options.patch)
    md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
             '882f67668cb14a0a9e4a27ef22278027'
             '5ba8b610aa9763a5f42b9f7cbd7a86ad'
    then makepkg (i had to add --asroot, don't ask why
    and finally pacman -U hal-0.5.10-1-i686.pkg
    another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
    I have also put the policy files as per the wiki instructions.
    PS: I know this is a dirty way to getting things done but as i said, I'm just starting
    If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

  • After upgrading to Lion internal mic does not work with Facetime

    After upgrading to Lion internal mic does not work with Facetime.  The mic is picking up sound as noted in System Prefs.  This was working just fine before the updgrade.  Facetime works OK on my iPod. 

    you have in french a tutorial to recreate your partition here
    Rebuild partition with Recovery HD lion after upgrade to 10.7.2
    i tested, it's work !
    For your wifi problem:
    Try to change your setup of wifi, look this table given by apple:
    I changed my wifi setup wep to wpa and it's work !

  • Keyboard plugs into the back of my display does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

    My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

    Try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Resetting network settings: Setting>General>Reset>Reset Network Settings

  • I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

    I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

    Logic 8 will probably run on your new machine but the installation program contains some older PPC code for pre Intel Macs. This was not a problem as all OSX versions contained the "Rosetta" PPC emulation, that is, up until Lion when all PPC emulation was dropped.
    There are ways to do this however, try searching Google for:  Installing Logic 8 under Lion or Mountain Lion.

Maybe you are looking for

  • LaTeX brackets don't display correctly (jsMath)

    I'm currently working with OLAT (a java based web application to manage lectures) and try to write some text containing LaTeX code inside (there is a html text editor which allows the use of LaTeX formulas via jsMath). When I try to display large bra

  • Battery not working properly after upgrading to 10.8.5

    Hi guys, i have upgraded recently to OS X 10.8.5 and now battery charge is always 0% and battery charging light in green state; system is indicating "replace now" as battery condition; the thing is that, before the upgrade, even if battery was not la

  • "SAVEANDBACK" Button In Folloup Activity from Service order

    Hi, Give me solution... Here  Created folloup activity from service order in web ui.....In folloup activity after click the SAVEANDBACK then opend the serviceorder.....but i added the data in folloup activity... that data not refresh in serviceorder

  • How can I parse a sql sentence like Oracle system do it ?

    I want to parse a sql sentence like Oracle system do. for example: here is a sql as follow select * from scott.emp; I want to use some functions to get 'scott.emp' as result, how can I do ? Thanks.

  • Authorization to Display product item in Sale Opportunity

    Hi, Expert.    I use SAP CRM4.0 In transaction display business opportunity , when I display . Can I customize the system to display product item for each user. Any suggesion will be appreciate Best regards Siriporn T.