Macbook Pro 2011 won't boot, grey screen, 10.9.4

Hi guy I hope you are all well,
I have been running a 1.1 MBP Santa Rosa since 2010 and decided it was time for an update, so in January I got hold of a 2008 Penrhyn model. That was running Mavericks absolutely fine until 2 weeks after 10.9.3 when it began to have gfx crashes, kernel panics, refuse to boot etc. Now it won't even turn on, just a low fan noise for 10 secs then it switches itself off.
I figured the Penrhyn was just too long in the tooth now and must have had dodgy hardware. Nothing I've made this year will now work on the Santa Rosa on Snowy so I decided to splash out on a mid-2011 Sandy Beach, 15.4" 2.0ghz i7. This has been absolutely great the last month, until the day I went up to 10.9.4. It began to crash and need rebooting when iPhoto opens after plugging in my iPhone. At first I disabled iPhoto's auto-open and the phone works fine with iTunes and charges when iPhoto is closed. Without the phone plugged in iPhoto worked fine. Inevitably I plugged the phone in last night while iPhoto was still open. The screen went a purple-pattern, I rebooted and now it won't boot past the apple logo and pie-wheel at the chime. It just goes to a grey screen.
Recovery does not work, just a solid blue screen. Booting off a Lion install DVD also just gets a grey screen after the logo/chime. I cleared the PRAM, and the SMC three times. Starting in safe-mode the progress bar loads fine, but then it's back to grey screen.
So I'm now back on my Santa Rosa, which has never had a fault, nor may I add have any of my PPC Macs!
Anyone have a possible solution for this or know what the exact hardware-fault may be? I really don't want to pay Apple to repair it, having spent on over £1000 on MBPs this year that now don't turn on
Many thanks, James

I've been having similar issues with a late 2011 17" MBP with 10.9.4.  I haven't worked out what the problem is, but I'm eventually able to enter recovery mode after multiple (15-30) attempts.  Between attempts, I tried resetting the PRAM, entering safe mode, entering hardware diagnostics mode, and occasionally just leting it hang on the blue or grey screen.
Repairing disk permissions fixes the problem.  It's happened twice now, with an hour or two of panic between getting it back up and running again.  It's only been since the 10.9.3 or 10.9.4 update, which other users have experienced problems with.  I didn't make a backup before updating (this is the first issue I've ever had with my machine), so I may have to start with a fresh install to determine if it's software or hardware.

Similar Messages

  • HELP! MacBook Pro 17" Won't Boot-Grey Screen-Errors During Verbose Safe Mode Boot

    Booting regularly it hangs on the grey screen, if it does go into desktop, it freezes and won't do anything.
    I did disk check and repair even though it found no errors, and did verify and fix permissions since it showed a LOT of permission errors. Still won't boot into desktop though.
    Ran safe mode verbose and got the following disk0s2 I/O Errors-What does this mean??? Hard drive problem?
    I have reload OS X 3 times in the past few weeks because of freezing issues in Mavericks and stuck with Mountain Lion and it was running fine until I went to boot up this morning after a clean shut down and won't boot up ever since.
    http://i43.photobucket.com/albums/e389/RIPNHL2005/photo_zpsb0d8d5cf.jpg
    http://s43.photobucket.com/user/RIPNHL2005/media/photo_zpsb0d8d5cf.jpg.html
    Please help.....This is my main laptop and job search tool.....
    Thanks!!!

    Is this the right drive config for the macbook pro?
    Is Western Digital no good? Best Buy has them in stock.....
    HGST
    500GB Travelstar™ Z5K500 Hard Disk Drive
    2.5-Inch | SATA 3.0Gb/s | 5400RPM | 8MB Cache
    High-performance, high-capacity mobile storage for notebook PCs and other applications
    Low Profile - 7mm thickness for slim designs
    High Capacity - Up to 500GB
    Quiet Operation - Enjoy a richer audio-listening experience
    Travelstar Z5K500 is the second generation 7mm, 5400 RPM 2.5-inch hard drive from HGST, with capacities ranging from 250GB to 500GB, and the second generation Advanced Format drive. Advanced Format increases the physical sector size on HDDs from 512 bytes to 4,096 (4K) bytes, which improves drive capacities and error correction capabilities. The 500GB per platter, one-disk models are designed as a direct replacement for standard 9.5mm HDDs, for use in notebook PCs, external storage and gaming consoles, as well as new, thinner and more robust device designs. The Z5K500 carries the EcoTrac classification due to its low-power consumption and eco-friendly, halogen-free production. Travelstar Z5K500 delivers the right balance of capacity, power-management and design flexibility to meet the needs of mobile applications.

  • MacBook Pro 2011 won't boot

    My early 2011 MacBook Pro 15" won't boot. Second time dealing with this this year. Apple Store charged me $300+ to fix it the first time. It worked for a few months, but stopped working again. Took it to the shop again and asked them to fix it for good this time. They wanted to charge me $310. I said NO. why would they charge me twice for a repair I asked them to do before? How widespread is this problem? I know for a fact I'm not the only one dealing with this problem.

    What have you done to define your problem?  Look at this comprehensive troubleshooting article and perhaps you can find a solution:
    https://discussions.apple.com/docs/DOC-3353
    Note that Apple repairs are guaranteed for 90 days.
    Ciao.

  • Macbook pro will not advance beyond grey screen at beginning of boot

    macbook pro will not advance beyond grey screen at beginning of boot

    Try performing an SMC reset. I am having this problem also.
    To perform an smc reset:
    1. Shut down your Mac, leave the MagSafe charging in.
    2. Push three buttons: shift + control + option and the power button. Push and release together.
    3. Wait a few seconds then turn on your Mac as normal.
    Hope that works out for you!

  • Macbook Pro 2011 won't turn on (RAM issue?)

    (Macbook pro 2011) I had water damage so I sent in to apple for a complete makeover and they pretty much replaced everything. The laptop seemed to be working fine but the issue is that when I put my laptop to sleep / turn off it won't turn back on. I haven't had the time to take my laptop back to the apple store due to projects / travelling. I've found that there is one quick fix, manually resetting the ram by taking the RAM chips out for a second then re-inserting them. The other way is to hold Command+Option+P+R 3 times before reboot and that'll work temporarily for a day maybe. I plan on taking it to the apple store in a day or so if the problem doesn't resolve itself. Do you guys have any suggestions?
    Thanks,

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Also see:
    Reinstall OS X Without Erasing the Drive
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • When installing Windows 8 from a USB to my MacBook Pro 2011 only EFI Boot option shows, there is no normal Windows Boot option

    Hello. I want to install Windows 8 on my MacBook Pro 2011 form a USB stick. And when I restart, holding Alt. There only option is EFI Boot, which doesn't work. And there is no usual Windows option. I have tried instaling using an external optical drive, but it doesn't work. And I don't have an internal drive because it has been replaced with a HDD. Please help.

    try kunu's solution here and report back
    https://discussions.apple.com/thread/5105056?tstart=0

  • MacBook Pro (2011) Won't Charge Without Restart

    Hi guys, I searched the forums for this problem but couldn't find a match. When I plug the power cable into my 2011 17" MacBook Pro it won't take a charge and the light on the cable doesn't come on. However if I restart the computer, the light will come on and it will start charging. This sounds like a software issue to me and I haven't had the problem until recently so I'm guessing it's caused by the latest OS X update. Has anyone else experienced a similar issue and found a fix?

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    Best.

  • Late Macbook Pro 2011 won't charge via MagSafe adapter.

    My friends Macbook Pro 2011 same as mine wont charge the battery via MagSafe adapter. The battery is good and the adapter also, ive checked them on my Mac. The problem is that on her Mac it won't charge. I've change the MagSafe adapter on her computer and it didn't work still no charge, no green light on the L shaped adapter. Can it be the Logic Board?

    Resetting SMC could solve the problem.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • MacBook Pro (2011) won't display 2560x1440 native resolution on external monitor

    I have the new MacBook Pro 15inch with 2.2Ghz quad core and an external NEC PA271W Monitor with a 2560x1440 native resoultion. I have them plugged together via the dual-link DVI-D cable but the MacBook pro will only recognize 1920x1080 as the max resolution on the NEC monitor. How can I output the max 2560x1440 resolution to the monitor?
    The MacBook Pro is left open for dual screen view. Please help. Thanks!

    I am surprised no one asked you the following question regarding your response.
    What if I don't what 2 displays and I only want to support the external monitor? Can I be in extended mode and have only 1 display?
    The reason why I ask is because I am going to buy a dock for my MacBook (2012). The dock forces the MacBook to close thereby rendering the internal display useless.
    I think what I am after is some sort of "extended to external" mode.

  • Help: Macbook Pro Retina won't boot past Grey screen w/ Logo

    All,
    My computer died last night with each application not responding. I couldn't shut down normally so I held the power button to turn it off.
    Next morning, I tried to boot the MacBook Pro and the boot process stalled at the grey screen with the Apple Logo and spinning wheel. I let it go for an hour and there was no change on the screen. Based on Apple's help desk I ran Hardware diagnostics (extended with looping disabled) and got the following error
    4HDD/11/40000000: SATA (0,0)
    The screen shot is below
    I ran this again with standard testing (no looping) and standard with looping and all gave the same results.
    Any ideas? The compute will not boot.
    Thank you
    Phillip

    That's what I thought but was able to do CMD-R and verify/repair permissions the disk. My hard drive is actually a flash drive so I'm guessing the controller or motherboard.
    I do have it backed up with the last 24 hours ago.
    Thanks
    Phillip

  • I have an eraly 2011 macbook pro that won't boot to dvd

         My macbook pro recently started crashing after a few minutes of use, and after doing that a few times it sopped booting to disk and the scrren apeared to be slighty pixalated and in a blue tint rather than the usual grey. I took it to a store that informed me that my logic board was fried. I bought a part on my own and replaced it . After that the computer started booting fine but slower than usual, but when I went into the disk utility and atempted to verify the disk it said that the hard drive needed to be repaired. Unfortunately I had lost the cd that origially came with my laptop so I bought a copy of snow leoppard (which is what I have installed on it) from apple.com. But when I try to boot to the dvd to repair it, it gets stuck on the apple logo and starts beeping in intervals of 3. I tried replacing the hard drive but the same thing happens. It only seems to boot from the original hard drive, I even tried creating an instal thumb drive from that same cd that also won't work.
    Any insight would be helpful,
    Tanks in advance,
    Mike 

    You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource:  International Support Phone #s.

  • My Macbook Pro either won't boot or would crash a few mins after booting

    Hi everyone, I'm having some problems with my Macbook Pro with Mac OS X 10.6.8 here.
    It all started when I was just browsing the internet normally (with spotify web player on, if that's of any use) and a screen of black and white stripes appeared. I shut the computer down and tried to turn it on a few times but it would either just be stuck on the blue screen, or would boot but as soon as I opened Chrome the screen would just freeze (pointer won't move, caps lock cannot switch).
    Googled for some help on similar problems. Some people recommended booting in safe mode and then restarting -- which worked for me. I could boot just fine in safe mode, so I restarted the computer in normal mode. It worked just fine until I played some video on youtube, and the black&white stripes appeared again. Shut the computer down. Looked for other solutions. Tried the disk repair and disk permissions repair many times. Strange results came up from the permission repair: permissions differ on Remote Management stuff, and repairing numerous times won't fix that problem. I suppose it should be no big deal since I don't use Remote Management on this computer anyway.
    Whenever I tried booting in normal mode, the computer would either be stuck on the blue screen or on the gray screen. Treid NVRAM and SMC reset to no avail. Tried internet recovery mode but didn't work. Tried Apple Hardware Test too but all hardware was fine. The last time I booted in safe mode, I uninstalled the flash player and then managed to restart in normal mode, but it freezed again after a while.
    The only thing left to try is reinstalling the OS but I dont really wish to erase my harddisk. Would it be a good idea to do this or would it only fail on me? I'm thinking of bringing it to an Apple repair but wish to solve this problem at home where possible.
    Any help would be greatly appreciated! Thanks in advance

    berayen,
    if you have Mac OS X 10.6.8 installed, then OS X Internet Recovery is unavailable to you.
    Which model MacBook Pro do you have?

  • My macbook pro wont get past the grey screen at startup. Help!!

    After doing a run of the mill software update on my macbook pro (running snow leopard) it froze during the "moving items into place" stage. I forced a shut down and now it wont get past the grey screen with apple logo and spinning wheel. I have tried booting from the original DVD but it still freezes. When I boot it in verbose mode it seems to stop at "jnl: unknown-dev: update_fs_block: error reading fs block # 3597880! (ret 5)", the Apple AHCD Disk Queue manager :: set power state is timing out and there is a disk I/O error. I have tried to reset the power manager (not sure if it worked or not) and I have also tried clearing the PRAM (again, not sure of that worked). When I try to look at the hard drive using target mode on my imac the hard drive doesn't come up but the DVD does. I'm concerned that my hard drive is fried. Any suggestions?

    It would help to state in your post which remedies you tried that didn't work.
    Start here >  OS X Lion: If you see a gray screen at startup
    If nothing there helped, try Starting up in Safe Mode
    Safe Mode deletes some system caches that may help.
    A Safe Mode boot takes longer than a normal boot so be patient. Once you are in Safe Mode, click Restart from the Apple menu.
    If a Safe Mode boot didn't work, since your Mac has OS X v10.7 installed, restart your Mac while holding down the Command + R keys so you can access OS X Recovery built in utilities. The startup disk may need repairing.
    Tip:  Hold down the Eject key while starting up your Mac to eject a disc.

  • Brand new MacBook Pro doesn't get past grey screen (with spinning gear)

    Hello,
    I'm a new Apple customer - I bought a new 15" MacBook Pro during the Black Friday sale last week. Since purchase, I've installed the software I needed (Office, CS4) and have used it to browse the web and write emails.
    Today when I tried to use it, I simply got to the grey screen with the Apple logo on it and the spinning gear device underneath - got absolutely no further.
    I have done the following (running from mains adaptor - but the battery indicator is reporting 7 lights anyhow):
    1. Boot from the OSX Install Disc, and run the disc repair utility. It reported no problems found. Restarted... same problem.
    2. Boot holding down SHIFT to go into safe mode. Underneath the spinning gears, a progress bar filled up to 100% and then disappeared; leaving the grey screen, logo, and spinning gears. Nothing further.
    3. Boot holding Option, P, R as per the manual to reset the PRAM. According to the manual there should have been a chime/beep - there wasn't. It just sits on the grey screen, logo, spinning gears. Nothing further.
    Right now I've got a £1300 MacBook Pro less than a week old and it appears to have just packed up.
    Am I missing anything here, or should I just return it?
    Thanks,
    Chris

    Definitely take it back!
    My friend bought a new iMac from the Regents St. store a few weeks ago, just before the update to the new models came out, and after a week she couldn't get it to boot. I felt very embarrassed as I had persuaded to her to switch to Mac after years of PC woes, so a broken mac after a week didn't look do me any favours. The genius guys didn't mess around, they took back the dead one and gave her a new one, this time she got the new version, they also threw in iWork free as a good will gesture. New one is running fine.
    If you haven't already got Applecare, I highly recommend buying it within the next 12 months. I have needed it on a couple of occasions after the standard warranty ran out and the tech support has been brilliant, got me working again no quibbles.

  • MacBook Pro (2011) won't start up

    Hi,
    Last night I shut down my Mac as usual. But when I wanted to start it up this morning, nothing happened. No sound, no light, nothing.
    I have no idea what it could be. I doubt that it's an issue with the charger or battery, since the LED's are still showing full green lights.
    I know that an SMC reset could work, but the problem is that the left-shift and I think the left-ctrl keys of the internal keyboard don't work.
    This problem was already there before this happened. I've tried with an external keyboard, but no luck. I also read that removing the battery could help.
    But then again I have one of the later versions of Macbook Pro, so removing it isn't as easy.
    Perhaps I should try to remove and reinstall the battery myself? Any suggestions?
    Thanks,
    Lisa

    LisaV16,
    is your MacBook Pro one of the Early 2011 models which originally came with two grey installation DVDs in the box? If so, you could try booting from its Mac OS X Install DVD.
    If your left Shift key wasn’t working before this happened, then you should probably make an appointment at your nearest Apple store to have them diagnose these problems.

Maybe you are looking for