MacBook Pro cannot connect to wireless printer

I just replaced my printer with an HP Photosmart plus e all in one B210. I set it up and it connected to my network and prints fine from my PC. When I installed the software on my MacBook, it is able to find the printer, but after installation is complete it is unable to connect. I have checked the HP support page but it appears I have done everything correctly. I am assuming there is a setting or two that I need to tweak but I cannot figure it out. I have turned off firewall, and all devices are connected to the same network. Any suggestions would be greatly appreciated.

Apparently my original post was not clear enough. The printer shows up in Print&Fax under System Preferences as idle with a green dot. I have tried with "share this printer" selected and printer sharing turned on but still does not connect. The printer works just fine with my PC connected via ethernet to a dual band Airport Extreme. I have installed/reinstalled the software several times and the printer says it has the latest firmware. I am also unable to utilize the AirPrint feature with my iPhone 4 running 4.2.2.

Similar Messages

MacBook Pro Cannot Connect to Wireless Router

I have a brand new MBP and it won't connect to any non-apple wireless routers
- my computer is 2 days old (it's awesome and I love it accept that I can't get wireless connection at home)
- wireless router: westell versalink model 327 W
- PROBLEM: my mbp will detect the network just fine, but won't connect to it...just times out, it will connect to a neighbors linksys, but cannot load any internet pages, so still not helpful. When I try to connect to the wirelesss router using the network utility it asks for a WEP password, which it never did before because it's an open wireless router. (I know you should always password protect, but it's not my router...I'm just in the same house)
- I had a powerbook G4 and ibooks that have all connected fine to the same wireless network. My dad has an HP laptop that also connects fine
- it only connects to the apple brand airport wireless routers
- it will connect to the wireless router if I plug in the ethernet cord
- I have tried checking the connections, allowing all connections, repairing my disk permissions (even though my computer is only 2 days out of the box), resetting the router, opening the router so no password is needed...NOTHING WORKS!
- I also tried another wireless router (netgear): doesn't work
I've been reading around in some forums and this seems to be an apple and maybe more specifically a macbook pro issue (just by process of elimination). One forum said that it was because of an airport update that basically "breaks" mbp's airport and makes it not accept any non airport wireless connections, apple supposedly is working on a fix but who knows
I'm feeling disappointed and very upset that this is even a problem, especially with how many people I read are dealing with the same issue wit still no solution. My mbp was far from cheap and this just shouldn't be an issue. I'm planning on contacting apple and getting to bottom of this or at least some kind of answer.

- it will connect to the wireless router if I plug in the ethernet cord
this is because there is an actual physical connection between the router and the machine, so the router allows the connection automatically. i believe ALL wireless routers have a "Wireless Access List" in their config. the owner of the wireless router must add any machine or device seeking to gain access to the wireless router. consult your routers documentation on how to access the router from a web page and add your machine. this is usually done by adding the machine's mac address to the wireless access list. i added my 15"mbp and iphone to my netgear wireless router in about ten minutes and have no problem connecting every time.
also, when making any changes in Network Preferences, be sure to "Apply" after any change or adding any wep key. let me know if you have any questions.

Brand new macbook pro cannot connect to wireless networks

The first time I called apple tech, they thought it was a problem with my internet provider. I've called 4 times now, and I'm still getting the runaround.
I have an old (2001) G4 sitting right next to my macbook pro which can see numerous wireless networks and connect to them all. A strong connection at that. However, my brand new (refurbished) Macbook Pro Intel etc,.... supposedly best computer ever made, . . . . can see the same wireless networks but has never been able to connect. As a student, I saved for a year to buy this notebook so I could work at cafe's & study with my friends. My friends with PC's can all connect to these wireless networks. My friends with older, less expensive notebooks can connect no problem. I have never been able to connect. Bought this peice of junk 2 1/2 months ago - only because I didn't want to be stuck at home anymore with my desktop. Stupid me to trust apple.
I wish I could get my $ back, but I'm now being told that it's 30 days too late. Before they told me it was a minor thing and some software update could fix it. I did as told. downloaded and installed their 10.4.8 thingy - deleted all the keychain stuff - nothing. same peice of junk.
Now they are telling me to go back to the genius bar where folks are just rude to me and tell me they can't help me becuase I bought a "refurbished" model that didn't even save me $25. What do you know.
Anyone having problems like this? Anyone out there who can help me?

Okay,
I apologie for calling it a peice of junk. I know you all probably worship this machine. I'm just really frustrated. I noticed that this is a very common problem - though most of the posts identical to mine have dissapeared from apple.com - this well known defect is all over other discussion boards and websites like macdefect, etc,....
So, can any of you tech gods help me with this very well known, common problem that I haven't been able to fix with 10.4.8 upgrade?
Thanks for your time and assistance,
-mcgrafx

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!

We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected

Macbook Pro cannot connect to the internet even when others can

Hi! Please help me. We have an internet WIFI connection in our office but only my MacBook Pro cannot connect even when I entered the correct password. My Iphone and Ipad work just fine. It says "connection timeout" but all other laptops can connect. I tried network diagnostics already and it always say "connection timeout". I dont know what to do anymore.

Yes, and when I open the Network Utility it shows a working IP address, and a 54Mb/s speed from the wireless router. It even shows the shared computers from my roomates. But when I try to access the internet it does not load anything on Safari or Firefox ( or any other internet application for that matter). It is completely unconnected. YET, As soon as I activate the AirPort card on the top right where I have my signal strength, it shows on the Network Utility information that there are 'packages' being sent and received, and I have NO programs open what so ever, I have closed everything except finder and network utility... Does this mean I am being hacked, or have some sort of Trojan or something in my computer? I ran an antivirus that my school provided, called Virex by McAfee, it came out clean except it says it cannot read one file.
I tried repairing my disk, and that did not work either. I did the Ram reset like you suggested, but that also did not work. I doubt it being a hardware error. I am going to try to connect it to an ethernet cable to see if that will work. Then I will let you know what happens with that, but that would still not be a solution since I need it wireless, cause the router is in another part of the house.
Thank you for your help, and I hope we can get this sorted out.

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi

Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi

*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu 
Troubleshooting advice can depend on that information.

My Macbook Pro cannot connect to the internet using an ethernet cord.

My Macbook Pro cannot connect to the internet using an ethernet cord. It was working fine for weeks, then all of a sudden just stopped. What could the problem be?

Hi bean07670,
If you are having an issue with the Ethernet connection on your MacBook Pro, you may find the following article helpful:
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/TS1317
Regards,
- Brenden

My macbook pro cannot connect to the app store is there anyway of fixing this?

my macbook pro cannot connect to the app store does anyone know how to fix this?

Read threads listed on right under heading More Like This
Allan

There software for net gear PS121 usIsb print server? Just purchased Macbook pro and have Netgear wireless printer router

Is there software download for net gear PS121 usb print server? Just purchased Macbook pro and have Netgear wireless printer router that has worked well for years on windowns. I have searched with minimal results

Check with NetGear for Mac OS X Lion driver/software.

How can I make sure my Macbook Pro stays connected to my printer?

How can I make sure my MacBook Pro stays connected to my wireless printer?

Welcome to Apple Support Communities
Simply make sure that your printer is on and connected to the same wireless network as your MacBook. In this case, you can be sure your Mac is connected to the printer

Installed a new harddrive in my macbook pro. cannot connect to hp photosmart all in one printer!!

I, recently, installed a new hard drive on my MacBook Pro Laptop Computer (2007 model).
Now, I cannot print out anything on my HP Photosmart C7180 All-In-One Printer! They don't
seem to be connected, as the printer icon shows up on my computer, and then, immediately, evaporates
into thin air.
How do I connect my HP Printer to my laptop, now that I have a new harddrive installed?

Hello Lady22:
When you received your printer you should have received two insulation disks one is for Windows computers and the other one is for Mac ( Apple Computer) If you have the disks please install Mac disk. Apple computers do search and down load the parcel software so you can do basic printing commands. You need to find the program that is some where in your computer that allows you to hook up Pinters and Devices. Ounce you find this open it up then connect the printer cable to the lap top. The computer program will list HP's printers yuo need to select your printers model number. Then it will down load the drivers for it to run basic commands. Ounce they are download run a test to make sure it is working right. Contact HP's store and asked them to send you a new set of insulation disk. Your old disk may have fine dust film on them. Clean them off pior to inserting them If you use glass cleaner and fine cloth make sure they are dry off before you insert them. If you used them before maybe a speck of dirt blocked out parcel program that caused it not to install correctly . frrw

MacBook Pro cannot connect to a wireless network

I am having the following problem with my MacBook Pro trying to connect to a wireless network using a 2WIRE Gateway wireless Router from Bell that worked perfectly until last night. My network preferences pane is saying "AirPort has the self-assigned IP address 169.254.227.XX and will not be able to connect to the Internet." I'm not a techie and I've tried everything I know and cant get my MacBook to connect to the internet using the wireless network in my home. I'm using ethernet connected directly to my router for this! It's killing me. Any help would be greatly appreciated.
Thanks in advance.

OK. The wireless network was selected. In the Preferences / Network pane I removed Airport by selecting it and hitting the - button and then created a new Airport by hitting + and selecting Airport. I'm getting the same result. Full network signal once the ethernet cable is connected. Greyed out icon with ! once I remove the ethernet cable and no internet. I appreciate your help so far. Any other thoughts? We also have an iPad, iPhobe, iPod, and two iMacs on the same network. All of them are connected no problem. My Macbook also still connects to the network in my workplace no problem. This all just started happenening yesterday and I don't believe I changed or upgraded anything. I just came home and it had stopped working.

Macbook Pro Cannot Connect to SMTP

I am running a 2010 MacBook Pro with OS X 10.6.8. I use Mac Mail app to send and receive e-mail. Since Thursday 27th Dec 2012 I have been unable to send e-mail. I get the grey spinning wheel until the following error message appears:
The SMTP connection to server “mail.(mydomain).co.uk” failed.
My outgoing mail server is currently showing as offline. In fact I have 2 e-mail accounts and both are showing as offline. No problem receiving mail. Connection doctor connects fine to incoming mail, but not outgoing.
I have tried the following (plus other things) without any success:
Checked all the details, passwords etc
Changed ports from 25 to 465 and 587
Checked my IP address - it is not blacklisted
Removed and re-added e-mail account
Telnet port 25 - it is not blocked, but appeared to successfully connect (from what I understood from checking www)
Temporarily disabled firewall
Re-installed Mac app
Rebuilt mailbox
Repaired disk permissions
Used the repair disk utility
Deselected SSL and changed various options within "Edit SMTP server list"
Reset the keychain
Tried updating software but it says no update available.
Re-instated an old Accounts.plist (and one other file which I forget, something like com.apple.mail) from time capsule.
I then set up a hotmail account on Mail app but had exactly the same problem, ie cannot connect with SMTP server.
However, I set up my e-mail account on my wife's iPad with the same details and there was no problem at all, e-mail sent just fine as it does from my iPhone. So the issue has to be with my Macbook, right? Can anyone help before I go and spent £1250 on a new Macbook? I'm sure I'm missing something obvious. Thanks in advance for any advice.

Just FYI, I've had the same problem for months now. I have been accessing my hotmail via the web, but decided to try the OS X Mail app. I could get emails into the account with no problem but couldn't send. I read all the blog and support entries and have tried everything they recommended, like changing my computer name to one word, without success. Then last night, it just so happened that my broadband provider had to change out my wireless modem. As soon as he plugged in the new one, some emails that had been in my outbasket for a month went through instantly and all of a sudden my Mail, both incoming and outgoing now work. So I think people need to look at their router settings for the a solution to the problem.

Brand New MacBook Pro Cannot Connect to Airport Express

Hi all,
Been reading through these pages and I think there are many others with the same problem as me but with no real answer, I thought it wouldn't hurt to ask anyway.
I have an Airport Express which I bought a couple of years ago. It initially worked fine on my old MacBook, I moved house and then it stopped working (flashing amber light syndrome). I got so fed up with it that it has been languishing in the loft ever since.
After a brief stint with a Windows laptop I decided it was time to return to Apple, and I haven't regretted it for a second.....until I got the Airport Express from the loft!
It simply, fundamentally and irrevocably...doesn't work! It's plugged in, amber light flashes but my nice new MacBook Pro just doesn't even recognise it exists. I have tried running the setup utility but at the first screen I am told that no unit is detected, I'm then told to check my Airport card (I assume it means the inbuilt modem which clearly works as I am writing to you guys now!). I can't even progress with the setup after this.
I have tried each of the Airport setup utilities to no avail (lap top cannot "see" AX).
Just as an update, I just connected my AX to my wireless router with an ethernet cable, a new network called 6ad16d appears to be available. Airtunes then works and I can connect to the internet (albeit slowly). I am not happy with this arrangement though as there is no padlock next to the new Apple network so I am worried that it isn't secure and surely I should be able to just plug my AX into the main and my hifi and it should work anyway?....just like it used to!
My apologies for the rambling post and please excuse my lack of computer knowledge. I really hope someone can help!

Fixed! You jut need a girlfriend with a lot of determination....not even sure she knows how she did it. Involved a lot of menus and a lot of swearing.
Surely this should be easier?!

MacBook Pro cannot connect to wireless printer

Similar Messages

Maybe you are looking for