MacBook Pro cannot locate Time Capsule on Verizon Wireless Network

Here's what I have: both my MacBook Pro and my Time Capsule are connected to the same wireless network. (I used the "join an existing wireless network" on the Time Capsule.) But when I go to back up, it says the disk is unavailable. And when I open the Airport Utility, I don't see my Time Capsule. Any ideas?

Welcome to the discussions!
It can be a tricky proposition to configure the Time Capsule (TC) to "join" another wireless network because the settings on the TC and network must match exactly.
Try temporarily connecting an ethernet cable from your computer to the one of the LAN <-> ports on the TC to see if that will allow AirPort Utility to "see" the TC.
If this does not work after a few tries, you'll need to "hard reset" the TC by holding in the reset button until the amber light blinks more quickly. Keep holding a few more seconds and then release.
Open AirPort Utility up and it should find the TC. Try the following setup:
Click Manual Setup
Click the Time Capsule tab below the icons to assign a name, device password and adjust Time Zone settings, etc.
Click the Wireless tab
Wireless Mode = Join a wireless network. If you don't see this choice, hold down the option key on your Mac while you click on the selection box
Wireless Network Name = Exact name of your Verizon wireless network
Wireless Security = Exact same setting that your Verizon router is using. This is where almost all "join" errors occur because the settings don't match exactly. Even when they do, there can sometimes be problems.
Wireless Password = Same password as your Verizon wireless network
Verify Password
Click Update. Close AirPort Utility. The TC should restart in 15-20 seconds and you should have a green light. Log onto your Verizon wireless network and you should be able to "see" the TC now. To confirm, open Macintosh HD and look for the Time Capsule icon under the SHARED heading on the left side of the window.
If the TC is located close to your Verizon router, it is easier (and more reliable) to configure the TC to connect that way, rather than using wireless. You'll still be able to perform backups over your regular Verizon network. Post back if this is an option for you and we can go over this type of setup.

Similar Messages

  • How to backup MacBook Pro without AirPort Time Capsule or External hard drive

    How to backup MacBook Pro without AirPort Time Capsule or External hard drive

    This is crude but if you need a work around, just plug the USB drive directly into the iMac.. copy the files to it.. then plug it into the TC.
    You also do not need to use the TC as an intermediary between your iMac and MBP.. just turn on sharing in the computer.. so you can directly copy files from one to the other.. Macs have public access directory preconfigured for each user account.
    As far as mounting the TC..
    In finder use Go, Connect to server.. and type.
    AFP://TCname or TCipaddress
    Where TCname is the actual name of the TC.. I strongly recommend you follow SMB network rules.. ie if your TC has a name like
    Fred Blog's Time Capsule 2445566.
    It is too long.. it has spaces and it has non-alphanumeric characters.
    Shorten it to FredTC
    No spaces no characters that are NOT alphanumeric.
    TCIPaddress is simply the standard IP.
    You can also use CIFS://TCname which according to the article forces the connection back to SMB1 rather than SMB2 which as usual is broken.
    But I would definitely use AFP if possible. I cannot understand the decision to move to SMB as standard.

  • Macbook pro retina and time capsule problem

    I have purchased a macbook pro retina and time capsule recently. I had no trouble setting up the TC, however even though it is visible in the Finder, I can not connect to it. I can not make time machine. Try to connect with my imac that has snow leopard and immediately detected.

    I have purchased a macbook pro retina and time capsule recently. I had no trouble setting up the TC, however even though it is visible in the Finder, I can not connect to it. I can not make time machine. Try to connect with my imac that has snow leopard and immediately detected.

  • I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    Replace the Time Capsule with one that has a larger hard drive. Or erase the one you have and start a new set of backups or backup one of the computers to a different backup drive.

  • Since I've upgraded to Maverick the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

    Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

    I have over 250G backed up and I really don't want to reset everything and start again.
    Not sure what you mean here. 
    A reset will not affect any of the data on the Time Capsule hard drive.  You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
    I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
    I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
    Another user may be able to offer more input on Mavericks.

  • Can time capsule boost the wireless network without beeing connected with cabel, hence wirelessly?

    Can time capsule boost the wireless network without beeing connected with cabel, hence wirelessly?

    Yes, providing that the wireless network has been created by another Apple "n" router.
    The "extend a wireless network" feature on the Time Capsule is not compatible with devices from other manufacturers.

  • Problems using time capsule to extend wireless network

    Hi all,
    For some months I had to move to Germany for work (I'm from Italy, sorry for my English).
    I am sharing internet with some other people, the wi-fi router is in their apartment, so basically I don't have access.
    As the signal is strong enough only in one room I would like to use my time capsule to extend it also in the other rooms.
    But when I try to extend it, my macbook pro connects to the network I would like to extend and the time capsule is not seen anymore.
    To see the time capsule again in the airport utility i have to reset it to factory default.
    Do you have any idea?
    The wireless network is WPA2 protected, the provider is the German "Unity Media".

    As the signal is strong enough only in one room I would like to use my time capsule to extend it also in the other rooms.
    Apple's "extend" feature will only work if the Time Capsule is "extending" the wireless signal from another Apple wireless router. In other words, the "extend" feature is not compatible with wireless routers from other manufacturers.
    You will need to connect the Time Capsule to the wireless router using a wired Ethernet connection.  Connect from one of the LAN <-> ports on the wireless router to the WAN "O" port on the Time Capsule.  Then, you can configure the Time Capsule to provide a separate wireless network for your use.

  • Time Capsule and Existing Wireless Network

    I've previously used time machine to back up my G5 & Powerbook to separate external hard disks. I've just bought time capsule so that I could back up both computers to the same drive.
    However, when powering on the Time Capsule device it is not visible on my existing network (called Wireless LAN) and instead it seems to have created a separate network called Apple Network b73829.
    If I switch to this network I can see the Time Capsule device and it is also visible in Time Machine preferences but I cannot access the internet or any of my other wireless devices (Extreme Base Station etc.) which form the Wireless LAN network; I must switch back to this network if I want internet access.
    What I don't want to do at this stage is replace my existing base station with the time capsule device; I just want to use it for backing up wirelessly.
    I have reset the device several times now but it just will not join this existing network - what am I doing wrong?
    Many thanks & regards,
    Cliff
    Brighton, UK

    OK, so I have done this and it's made no difference. The new network Apple Network b73829 is still present alongside Wireless LAN.
    I can only access Time Capsule if I switch to the new network, with the resulting loss of internet access from my Powerbook and, if I switch back to Wireless LAN I regain internet access but cannot see Time Capsule.
    Although I just want to use Time Capsule to back up I have tried to connect it to my wireless LAN using the Join Existing Network on Airport Utility (even though I've been told I don't need to do this for Time Machine) but it has failed each time. After entering the password and wireless password information etc. and pressing update the Time Capsule device does re-start but there is ALWAYS an error message that says the device cannot be found and I should check that I am close to it (it's 3 feet away) or I should connect via Ethernet. If I connect via Ethernet it seems to disable the wireless functionality that I bought the device for.

  • Time Capsule on Existing Wireless Network

    My niece will be going to college this fall, and her dad bought her a Time Capsule.  Her dorm will already have a wireless network. How can she use the Time Capsule on an existing network and still have some security?

    Using an Ethernet cable, she should connect the Time Capsule directly to the Mac's Ethernet port and backup files that way. The Mac will not be able to connect to the Internet when the Ethernet cable is connected and backups are running.
    If the Time Capsule is configured to "join" the campus wireless network using wireless only.....which is not supported by Apple..... then backups must occur very slowly over that "public" network. Definitely not recommended.
    If is not too late to return the Time Capsule....there are better, and less expensive options here.

  • About connecting my time capsule to a wireless network

    I have bought a time capsule but as my place isn't ethernet-able, how can I use the time capsule as a "wifi acceptor" to connect with my wireless network, and then boardcasting wifi signal to my devices? I have tried the extending a network option, after it restarted and I can't even search any base stations. Can anyone suggest me a solution to that? I really need to do so although I know that this isn't a purpose of using the timecapsule. In other words I'm trying to make the time capsule as a wireless modem to connect to another wireless network, in the mean time boardcasting wifi signal to my devices.
    Thanks guys.

    how can I use the time capsule as a "wifi acceptor" to connect with my wireless network, and then boardcasting wifi signal to my devices?
    Unfortunately, this is not possible.
    In order to broadcast a wireless network with Internet access, the Time Capsule must be provided with a wired Ethernet connection at its WAN "O" port.
    Check wtih your Internet Service Provider to see if they have an adapter or other device that will provide a wired Ethernet connection to the Time Capsule.

  • 1 macbook pro and 2 time capsules

    I have 1 macbook pro retina and 2 time capsules.
    The time capsule at work i want used to backup my work related content, and the time capsule at home i want used to backup my personal content.
    I don't want to exclude the same folders for work time capsule and home capsule.
    Can this be done?
    Thanks

    Look at one of the other backup utilities.. TM whilst convenient has plenty of other alternatives..
    For a simple folder backup you should be able to script a backup as a rather simple file copy. I am not sure what is available in the Mac world to do this but but I used similar tools that simply script a zip backup of working folders in windows.. that worked very well.

  • Back and sharing solution for Macbook Pro - Synology or Time Capsule?

    Hi
    Hi,
    My plan is to have a complete new efficient and flexible set up. I have decided to buy the new Macbook 13inch Pro with 16MB Ram and 3.1 Ghz i7 processor with 256GB glash drive.
    I want an external solution for my storage and sharing needs.
    Minimum requirements -
    - Time Machine backup support for computer
    - External storage for 95% of my data (kind of like dropbox) including music, movies, photos, business and personal data, but that can be accessed easily and quickly and functions properly on my computer. (e.g when connecting to itunes and other apps)
    - Remote access to this data when required
    Additional Preferences
    - Easy to use (I am a newbie on Mac laptops!)
    - Back up additional devices or at least upload photos from ipad and iphone
    - Connect movies to Roku
    - Easy access to data wirelessly from outside the country
    - Support external plugin hard drive
    - Quiet and low power consumption
    I like the flexibility of the Synology but I know that apple usually works best with apple devices, so due to my inexperience in the apple environment I need a little help.
    Is the Synology best for my needs (if so which model) or the Time Capsule and just plug in my usb hard drive? (I don't want to spend a fortune but $100 more for the best set up is acceptable)
    Thanks so much for your help
    Mike

    A third-party NAS is unsuitable for use with Time Machine, especially if it's your only backup. I know this isn't what you want to hear. I know that Time Machine accepts the NAS as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you try to restore, and find that you can't.
    Apple has published a specification for network devices that work with Time Machine. None of the third-party NAS vendors, as far as I know, meets that specification. They all use the incomplete, obsolete Netatalk implementation of Apple Filing Protocol.
    If you want network backup, use as the destination either an Apple Time Capsule or an external storage device connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
    Otherwise, don't use Time Machine at all. There are other ways to back up, though none of them is anywhere near as efficient or as well integrated with OS X. I don't have a specific recommendation.
    If you're determined to use the NAS with Time Machine, your only recourse for any problems that result is to the manufacturer (which will blame Apple, or you, or anyone but itself.)

  • Super SLOOOOW file transfer from MacBook Pro Retina to Time Capsule over WiFi - why?

    So I have been having a search around and it seems like the advice for folks complaining about ludicrously slow wifi transfers from their Mac to their Time Capsule is... to do it wired.
    As you may know, the MacBook Pro Retina does not have a cable Ethernet port. So I have to buy a Thunderbolt-to-Ethernet adaptor (and a cable if I don't already have one) just to perform this basic task? Seems hard to believe.
    MacBook wifi is showing as connected via 802.11n to the Time Capsule and the link speed is showing 217 Mbps in Network Utility.
    So why is it so slow?

    Thank you, LaPastenague - very complete answer!
    How is the old NAS connected to the TC?
    What actual speed are you getting?
    It is important that when you select an option you stop other options from interferring.. ie.. turn off wireless when you do ethernet.
    First, I had the NAS connected to the laptop (Dell XPS M1710, Win7 - (yeah, I know, but it does the job, still)) via USB, which generated about 900KB/S r/w speed,
    then I tried connecting it via LAN to TC, but didn't succeed in getting TC recognize the drive,
    lastly, I connected it via the USB port directly to the TC, and got ~900KB/S r/w speeds again.
    In all scenarios, the laptop was connected via LAN as well (TC's WiFi was not disabled, though).
    Then I read the above thread and tried finding DHCP settings. Found them in the "internet settings" in the airport utility, but not in the "dive settings", so I didn't know what to change there.
    Strangely, the only thing that I changed was the TC-name, taking away a hyphen and a space (from "myname's TC" to "mynamesTC"), which resulted in faster r/w speeds, going from the 900KB/S to 1.5MB/S (still not what I expected).
    Also that any copying of files will be a loop, old NAS--Computer.. Computer--TC
    Got it. Tried to provide a faster connection by directly connecting old NAS to TC via USB, but makes sense.
    Each connection is just as impportant as the other. Plus you can see the computer must handle every packet in a double hop tx, rx tx rx for each one. So using gigabit all the way is vital.
    Will try again connecting old NAS to TC via GB-LAN, and have it recognize it, and provide and update here. 
    This is best done in full isolation from internet.. just setup so you can do the copy overnight.
    I was planning on doing several actions of moving files in a session of re-organizing, and am not really keen on waiting 4-6hrs between each step. The old NAS shall host all videos later, as it is recognized by the PS3 when connected via USB, while the TC shall host all photos and music, which I am rather accessing from the laptop's itunes.
    And also to realise lots of very small files can copy extremely slowly.. no matter how fast the connections are.. it is heaps of small files that cause copying to take forever because files are written to the disk and then file allocation tables are filled in for every one. It is why a backup is much faster as files are compressed into single large file. Or like TM using 8KB bands where the file ends are handled differently to normal disk.
    That will have added to the slow-ness of the session last night, as I was copying 25GB of photos which took 6hrs (***). So that would have been faster if I compressed them to .zip before moving? (not because it reduces size, as it barely does, but becuase it puts many small files into one big one?)
    Just moved a 164MB vid from laptop to old NAS (which is still connected to TCs USB port, while laptop to TC via WiFi): result: 1minute40secs @ 1.70MB/S.
    Then moved same vis from laptop to TC: 1minute55secs @ 1.80MB/S (gaining write speed slower that old NAS, therefore taking longer despite higher final speed).
    So, is there any further improvement / setting that I could change (DHCP / NAT) to get to higher r/w speeds, like the 6.75MB/S quoted above?
    Thank you again! MFP

  • Connecting Mac Pro to Time Capsule to get wireless network!

    My brother just bought for me the newest Mac Pro with MAC OS 10.6 and already have a TIme Capsule. At the Apple Store they told him that there was no need for him to buy a AirPort Extreme Wi-Fi Card, because I already have Time Capsule and through it I could connect my Mac Pro to my wireless network at home. Is this right?
    The router of the internet is located at my living room and the time capsule is at my bedroom. What I'm trying to say is... Can I use the Time Capsule as a AirPort Extreme Wi-Fi Card for my Mac Pro?
    I'll wait anxiously for an answer.

    You seem a little confused. The Mac Pro must have a wireless card installed inside and connected properly. Then you can wirelessly connect to that Time Capsule.
    If you do not have the card installed inside that Mac Pro then figure a way to run fast cat ethernet cable to the Time Capsule.

  • Macbook pro cannot connect to b/g compatible n network

    I have a Macbook pro 2.33 which I got in the US. I recently got a new Airport Extreme base station, whilst the macbook sees the network when it is in "n" only configuration as soon as I make it "b/g" compatible for older Macs to join my Macbook no longer sees the network and cannot join it. Any ideas ? My Macbook has no problem joining older b/g networks. Thanks for your help Roger

    The European Airport Extreme will defailt to using channel 13.
    A US Mac Book pro - can only use channels 1 through 11.
    Manually set your Airport Extreme to channel 6 and all will be well
    Glyn

Maybe you are looking for

  • Anti-slip rubber pads for mbp 13'

    Hi all, I've been losing the anti-slip rubber pads from the bottom of my macbook pro 13'', i just wonder is this part is buyable separately? apple store guys says I need to change the entire aluminium bottom pan which would cost around £30 !!

  • Cannot display a video that i purchased on itunes

    i need to know  the reason why if i purchased a video on itunes i can display the video on my laptop but not anymore on my iphone4s , please if someone knows the reason please let me know how i can fix it

  • 8GB or 16GB Memory on Macbook Pro w/ Retina?

    I'm about to retire my 17" Dell laptop from 2007 and upgrade to the new 15" Macbook Pro w/ Retina.  Woo-hoo! So here's the million dollar question...is it worth it to pay the 200 bucks to upgrade the memory from 8GB to 16GB?  I've read that Apple now

  • Finder closes everytime I eject a flash drive

    Hi, I like to leave Finder open on my desktop. Every time I eject a flash drive Finder is closing. I cannot find anything to change in Finder preferences to stop this. Any ideas appreciated.

  • Lost time machine backups

    I appear to have lost several months of backups including the original. I backed up my entire disk using TM on April 21 this year in preparation for erasing the hard drive in order to resolve a problem I had with having to force quit every applicatio