Macbook Pro does not enter sleep mode anymore

Hey guys!
I have found several threads relating to this topic, none of them offering a solution, which worked for me.
I recently updated from Tiger to Leopard (clean install), since then my computer won´t go to sleep automatically. I can put it to sleep manually or close the lid, it will sleep and wake up without any problems.
However, it will not go into *sleep mode automatically* when inactive. The display will sleep, with the sleep light constantly on and not pulsing, fans keep going.
What i have tried so far:
- closing all applications
- disable all network sharing
- SMC reset
- PRAM reset
None of those did work out for me.
I really do hope someone can help me out here, as i don´t want my computer to burn calories 24/7.
Thanks in advance
dawa

dawandeh969 wrote:
how do i check for those processes? there are a lot of processes running, what are haxies?
You would set the time to sleep to a short time and simply watch the top processes to see if a new one pops up.
Haxies are tools that modify the OS directly. TinkerTools is one of them. They are safe to use, but sometimes problematic.
i checked for the login items:
iCalAlarmScheduler and EyeTV Helper are activated.
Aha!
I would remove both of them, but I think the EyeTV Helper is the problem.
Some have reported the EyeTV Helper being a problem in waking the computer up at odd hours, but it might also affect sleep. You remove them with the little ( - ) sign at the bottom, not the "hide" checkbox with does nothing important.
Cmd-Opt-Eject puts my macbook to sleep, yes.
Just checking that a force-sleep works. I use it all the time.

Similar Messages

All-in-one 6830 printer Does not enter sleep mode when connected to a phone line

HP staff help. HP all-in-one printer 6830 does not enter sleep mode when conntected to a phone line via 1-Line jack. The Firmware is PNP1CN1521AR. On August 1, 2015, I purchased an HP all-in-one 6830 printer and upgraded to firmware PNP1CN1521AR.When a phone line is connected to 1-Line jack of 6830, the printer will no longer enter sleep mode and the display remains on indefinitly.Removing the phone connection either from the wall outlet or from the printer causes the sleep mode to work correctly again where the control panel display turns off after 5 minutes (or optionally after 10 or 15 minutes).This problem was previously reported by a user and has not been resolved, see:http://h30434.www3.hp.com/t5/Other-Printing-Questions/Sleep-mode-of-Officejet-Pro-6830/td-p/4772182 The user did not receive a resolution to this problem according to the thread.
There seems to be a 6830 printer firmware or hardware problem causing this. HP should be able to confirm this problem on 6830 easily.
Please advise ASAP.
Thanks

It's a regular analog phone line. I've tested it with other phone lines. No difference. I have another all-in-one printer which works fine (goes to sleep mode) when plugged into the same phone line.
The 6830 works ok in other aspects. The only problem is the sleep mode. Any 6830 with the firmware I mentioned should replicate the same result, regardless of anything else. The previous firmware to PNP1CN1521AR also created this problem according to the original report of this problem by another user.
I'm sure there's a bug in the firmware. A subroutine in the firmware monitoring the incoming fax ringing, mistakenly, sees the voltage across the phone jack pins as an event and wakes up the printer instantly even though there's no ringing. As the previous user also suspected, there seems to be an error in the phone line voltage threshold used by the firmware. The present firmware always sees a ringing at the phone line which causes it to never stay in sleep mode.

MacBook Pro 13" Retina enters Sleep Mode again after a few seconds

Hello!
Well, like the title already says, my MacBook Pro 13" Retina just entered into Sleep Mode again after I exited it. It took a few seconds, during which I could do stuff on it, like write on Messages.app and browse the internet. Then the screen just went black, and after I pressed a few buttons, the login-screen appeared again.
Any idea on what the source of this could be? Is it just a settings-goof (which I still have on default), or is there something major behind it? ^^" Mind you, I'm running it from the battery, it's not plugged into a power supply socket.
I have version 10.8.4 running.

Try resetting the SMC

Memory problems, system hangs or does not enter 'sleep' mode

Since my MacBook automatically upgraded itself (Software Update) to 10.5.7 about a month ago I've had nothing but problems with it.
I keep getting 'low memory' warnings, or the 'please wait' twirling symbol displays for ages whilst something happens in the background, or the system occasionally hangs for no apparent reason. Sometimes it reboots without warning.
But the most irritating aspect of the problems I'm experiencing is that when I put it into Sleep mode and subsequently want to wake it up, I notice that the cooling fan is in overdrive (so clearly not asleep at all) and then upon opening the cover I get a blank screen (nothing 'wakes up'). Or so it appears. But actually upon closer inspection I can see my last used screen display in very faint outline somewhere in the darkness of the screen. The only way out of this scenario is to hold the on/off button until the machine shuts down, wait a few moments and then boot from scratch.
From reading other comments in this forum there seem to be some real problems with 10.5.7, so I suspect I'm not alone in experiencing the problems I've described above.
I'd be interested to know whether people think I should take my MacBook to my local Apple Store to get them to have a look at a fix of some kind, or perhaps there is something I could be doing myself?

Hi,
*"But the most irritating aspect of the problems I'm experiencing is that when I put it into Sleep mode and subsequently want to wake it up, I notice that the cooling fan is in overdrive (so clearly not asleep at all) and then upon opening the cover I get a blank screen (nothing 'wakes up'). Or so it appears. But actually upon closer inspection I can see my last used screen display in very faint outline somewhere in the darkness of the screen. The only way out of this scenario is to hold the on/off button until the machine shuts down, wait a few moments and then boot from scratch."*
Try a href=http://support.apple.com/kb/HT1411> Resetting the SMC
*"Since my MacBook automatically upgraded itself (Software Update) to 10.5.7 about a month ago I've had nothing but problems with it"*
For the record, no computer can just update it's system software on it's own. When Apple has updates available you must type in your admin password at the prompt in order to "Accept" the terms. The software cannot be installed without your knowledge.
Next... anytime you do software updates of any kind, run Disk Utility (Applications/Utilities) and repair disk permissions. Launch Disk Utility. Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac.
Try booting from your install disk and verify whether or not the hard disk has errors.
Insert the installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
If you cannot boot from your install disk, try booting in Safe Mode
Check available disk space.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see
Capacity and Available. Make sure you always have a minimum of 10% to 15% free disk space at all times.
Carolyn
Message was edited by: Carolyn Samit

Macbook Pro will not enter Recovery Mode

I just bought a 2010 macbok pro. When trying to restore everything from my time capsule i was going to put it in recovery mode. When i turn the computer off and restart it using Cmd+R it just takes me back to log in screen every time. I was told by a friend to maybe try turning it on useing power+option... After doing that it popped up the "macintosh HD" icon. When i click that icon it takes me to the log in screen.
Is there anything else i can try to get this into recovery mode so i can restore from backup?

The computer does not have a Recovery HD. What version of OS X is currently installed on it? If your Time Machine backup is current and was made with Mountain Lion or later then connect it to the computer, OPTION boot the computer. Select the Time Machine device from which to boot the computer. This should boot from a hidden Recovery HD image on the backup drive. Once in the Recovery HD you can restore your backup. I suggest you first erase the MBP's drive so your restored backup is fresh.

MacBook pro does not recognize my WD external hard drive anymore

I use TIme Machine on my WD external hard drive. Everything was working great up until about a month ago. My MacBook Pro does not recognize my external hard drive anymore...I have done nothing differently than usual. I did search in previous discussions and tried rebooting both the hard drive and the computer.
The USB port is fine as it does recognize another external hard drive and also pen drives....Please help! I haven't backed up in a month and need to figure out how to get this to work soon. Should I call WD?

Does the WD drive show in Disk Utility?
Many times, a USB port simply cannot provide the power a hard drive needs. It is not uncommon for any electric motor to draw more power as it ages. A drive that worked before can stop working when it gets older because age has made it tak more power than any USB port can supply. There are a couple of cheap things to try:
1) A "Y" USB cable---two plugs go to the computer and one to hte drive, giving a power boost.
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
2) a POWERED USB hub. That takes the power delivery burden off the USB port so it can deal with data.
WD bare drives are fine but their enclosures are not very Mac-friendly. One thing that has reported helping is to get rid of the proprietary formating that WD puts on their drives. If you don't have to share the drive with a Windows computer, use Disk Utility to erase and reformat the drive to Macintosh Extended Journaled.

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

Go to Finder > Preferences then select the General tab
Make sure External disks is selected.

Prevent my MacBook Pro to turn into sleeping mode

How can I prevent my MacBook Pro to turn into sleeping mode when playing music on it with Itunes?

System Preferences -> Energy
Put slider to "Never". But this will prevent your Mac to never turn into sleeping mode, not just when playing music.

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

My MacBook Pro, does not start after pushing start button. The side bar starts and stops at half way.

Hy myneck,
Happy Holidays! The resource below may provide some steps to try if your MacBook Pro won't start.
Troubleshooting: My computer won't turn on - Apple Support
http://support.apple.com/en-us/TS1367
This article discusses what to do if your Mac won't turn on. To differentiate this from a display issue, be sure that when you press the power button:
You don't hear a startup chime.
You don't hear any fan or drive noise.
There is no video on your built-in or external display
If your computer has power but doesn't display any video, it may have one or more of these similar symptoms when you press the power button:
You may hear a startup chime.
You may hear fan or drive noise.
You may see a light from the Sleep LED (if your Mac has one).
Pressing the Caps Lock key on the keyboard causes it to light.
If any of these display-related conditions occur, see Troubleshooting: My computer has no video instead. Otherwise, continue with this article.
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
I hope this information helps ....
- Judy

My MacBook Pro does not appear to have power.

I have a 13" MacBook Pro, Mac OS X (10.6.3) that will not turn on regardless of what I do. With the MagSafe Power Adapter connected, its indicator light is green. When I press the battery indicator button, it indicates the battery is fully charged. The sleep light does not blink. After disconnecting the MagSafe Power Adapter, when I press the battery indicator button, it indicates the battery has no life (the first light doesn't even blink).
The electrical power outlet has power. When I use a new second MagSafe Adapter, my MacBook has the same symptoms and won't turn on.
My MacBook Pro does not have a user removal battery. I've tried all the recommended resets.
Any thoughts would be greatly appreciated.

10.6.3 is pretty old for this machine but shouldn't create this problem.
So you did this:
Reset SMC
http://support.apple.com/en-us/HT201295
If no joy then:
Try a hard reset. Disconnect the battery (take the bottom off and unplug, use your fingernail.) and power adapter. Press the power button for 1 minute. Let the computer sit for 5 minutes, Reconnect and try to start up.
No? - Go through the same procedure and try to start without the battery connected.
The addendum to this would be to try a known good battery.

Mac Pro does not auto-sleep (manual sleeping if fine!)

I have a small annoyance with my 2009 (Nehalem) Mac Pro I am wondering if someone can help with, or suggest something, please:
The Mac Pro does not auto-sleep; ever. I have played around with the sleep time settings, and enabled or disabled the 'sleep drives' option, but to no avail. Mac Pro will stay on, no matter if I am logged on OR even on the 'log on users' screen.
That said, I can sleep the Mac Pro manually at any time, and without any problems; it stays asleep without a hitch, and wake-up is flawless.
There is nothing in the console log that would tell me why the auto sleep doesn't function. I deleted the sleep plist and re-set, but again, no change.
Any ideas? Not sure what could signal the system to not do auto-sleep?
It's running 10.6.3.
Cheers,
Dan

Exactly the same problems as those described above: forced sleep works (by using the power button or closing the lid) but automatic sleep doesn't (using 'Energy Saving' preferences).
Tried every single piece of advice here and on other posts: reset PRAM/ SMC, verified disc, repaired permissions, deleted the power saving preference files, cleared caches & history, restarted in every conceivable mode... The only things that worked were safe boot and creating a new user account which means it must be a software issue.
Disabled/ removed/ paused/ reinstalled every piece of software I could but to no avail. The most frustrating thing? Having to wait for 5 mins every time I tried something to check whether the damned thing was going to go to sleep.
In the end, and in desperation, I took the advice of Dino X and downloaded PleaseSleep. Success! A genius piece of software. It forces sleep when the Energy Saver preferences cut in but, even if I don't set exceptions, it won't force sleep if there's a DVD playing (for example).
Only had the Mac for a few months and I'll never go back to that other, unmentionable operating system; the Mac's just too good but I'm vexed that I'm having to use third party software to get it to work as it should (and was) - feels like a bit of a Win*s solution to me.

Purchased Lightroom software on disc, new MacBook Pro does not have a disc drawer.

Purchased Lightroom software on disc, new MacBook Pro does not have a disc drawer. Have already opened box. Searched online and someone suggested downloading the LR trial, and set up Cloud, then can enter the serial number to complete the purchase. Which is what I did, but the serial number is being rejected.

Ok, maybe what they’re calling Creative Cloud is merely your Adobe ID, an e-mail and password to login with. The LR5 6 update link is probably what you want to download—all updates are downloads, anyway, so there’s no need to have a disc reader as long as you have internet and the serial number.
Here is the LR 5.6 update for a Mac: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5822
Another issue might be that what you think is a serial number is a redemption code that needs to be converted to a serial number using this website: http://www.adobe.com/go/getserial A clue that you have a redemption code is that it has letters and numbers. A serial number is just numbers and the first few are 1160-something.

HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

My MacBook Pro does not recognize my Android Incredible 2 cell phone and I can not transfer my photos from my cell phoen to my Mac. I was able to do this in the past, but can no longer do so. i havenot upgraded to any new software.

My MacBook Pro does not recognize my Android Incrdible 2 cell phone and therefore I can not transfer any photos from my cell phone to my Mac. I was able to do this in the past, but can not do so now. I have not upgraded to any new software. My USB cable is plugged in properly and I just get an error message -- "No Android Device Found". What could be the problem?

I had the same issue with the Galaxy S4 trying to see what the hype was about and was my first and last android phone. With that being said unfortunately it is a hit or miss with the Mac recognizing an android device or not. It worked perfectly fine the first time around and then it stopped working for no apparent reason. Through trial and error nothing I did solved the issue. I did however plug it in my Mac and left it connected for about 30-40 min to charge for a bit and all of the sudden it recognizes the phone. So I just launched Android File Transfer and everything else became fluid after that. I have no explanation as to why it happened that way, but what I gathered from this is maybe you just have to let it sit for a minute while plugged in before the Mac recognizes it, after all they are opposing software. On a side note this is why I will always be an apple user, Iphones and the like never have this problem

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numb

Received adobe photoshop elements 12/adobe premiere elements 12 when I purchased a MacBook Pro. The macBook Pro does not have a DVD player it is sold separately. To install the program can I download a free trial version and then use the serial numbers from the set I received?

yes, that's exactly what you should do,
Downloads available:
Suites and Programs: CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Macbook Pro does not enter sleep mode anymore

Similar Messages

Maybe you are looking for