MacBook Pro flashes file folder with question mark and startup manager will not run

My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?

Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Similar Messages

When booting up get flashing apple folder with question mark and no sign, why?

When booting up get flashing apple folder with question mark and no sign, why? Computer will not open up. I have tried resetting the Pram. I can access the hard drive from another computer holding down the t key when starting up the Macbook Pro. What to do next?

The cable connecting the HDD to the logic board may be faulty. If the internal HDD can boot the MBP when in an external enclosure, that will confirm this issue. If not, the HDD may need to be replaced.
Ciao.

Help. flashing gray folder with question mark on startup, then no startup.

on startup, macbook pro showed flashing gray folder with question mark, but no startup. after several retries, now shows circle with diagonal diameter, and still no startup. worked fine yesterday. suggestions?

Hi! I had the same problem as you. (I had a 2004 emac) all i had to do to boot it up was press enter and that seemed to do the trick but a grey folder might signify your missing files (Computer is broken) or its a network startup. Try it out!

Cannot get into mac. I get a white screen and flashing file folder with question mark inside. What can I do?

2012/13 MacBook Pro froze up, so I did a hard shut down. Now, when I try to start up, it makes 3 unusual beeps, then I get a white screen. After a couple minutes, a flashing file folder with a question mark appears and remains. What is wrong and what can I do to fix it.

Three beeps usually means a RAM or RAM slots problem. The Question Mark means there is no bootable system found.
A flashing question mark or globe appears when you start your Mac
Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark or globe appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by one or more of these:
a. Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
b. Boot drive's directory has been corrupted - Repair with Disk Utility.
c. Critical system files are damaged or deleted - Reinstall OS X.
d. The disk drive is physically non-functional - Replace the hard drive.
Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How do I get rid of file folder with question mark at startup?

Following a force quit, at startup I get, first the startup audio followed by a profile of a file folder with a question mark on it.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Imac froze and on re load folder with question mark appeared. Now will not start up to home screen.

The other night my Imac froze during updates. I found it in the morning with the screen and mouse frozen and only the loading icon spinning. I re stared the computer from the power button.
Upon re loading the apple logo did not appear and was replaced by a folder with a question mark in the middle. I looked this up online and found the best option was to use disk utility to check and repair the hard drive. This showed an error with HFS. Used disk utility to fix the hard drive so thast no error appear. I re stared the computer but all it loaded was the folder with the question mark again, so I decided to erase the hard drive of any information (I back up quite regulary, but left it as last resort due to inconvenience), when installing again it seems to go so far before telling me it cannot install and I need to re start. I have erased the dsk again and completed disk clean too before trying again and getting the same results.
I am currenlty stuck at this point and need help, which would be appreciated.
My Imac is an early 2008 Aluminimum model and installtion disk is 10.3

The folder with ? mark mean one of 2 things.
1) The OS is so corrupted that the hardware can't find it as a valid way to boot the system.
2) Your hard drive has failed.
You can try booting from the Recovery HD partition, Commadn + r keys at startup if you are running Lion Mt Lion or Mavericks.
Or boot the system from the original System reinstall DVD that came with your Mac or an upgrade OS X install DVd you may have purchased.
With either use Disk Utility to see if the hard drive is seen and if it can be erased or repartitioned and then restore from a Time Macine baclup or reinstall OS X.

Flashing file folder with question mark

Hello,
i have a mid-2010, 15"' MacBook Pro running Yosemite. Also, about two months ago, I replaced the two, 2 GB memory modules with two 4GB modules. Just in the past week the laptop has been acting very sluggish; login won't complete; and today, when first booting it up, I got a gray screen with a flashing "question mark" file folder. I've NEVER seen this before. In all the years I've been an Apple fan and user, I've never experienced a moments trouble.
In searching for other questions similar to mine, I read to restart in Safe Mode, select Disk Utility, then run Disk Repair on the Macintosh HD volume; exit Disk Utility, and restart from the Apple menu in regular mode. These steps worked however, once the laptop began restarting, it took at least 10 minutes to get to the desktop.
I am considering backing up critical files and wiping the hard drive clean or restoring it to factory. I don't know if this is necessary or if it would rid the system of whatever it is that's causing these issues. Also, I've not ever done this before so I don't know what issues I may encounter, or exactly what steps to take to accomplish this. If such drastic measures are not necessary, suggestions as to what I can do to correct these issues are appreciated.
Suggestions are welcomed. Thanks in advance.

That is a sign that the MBP cannot find the OSX. Usually is is a failing HDD or a faulty SATA connection cable/
Backup your data.
Then boot the MBP in the recovery partition and select Disk Utility from the 4 option menu.
Run Disk Utility>First Aid, Verify and Repair.
If the Disk cannot be repaired.
If the disk is OK, and the problem still persists, that points to the Cable.
Take out the HDD and connect it externally via USB in an enclosure.
If the MBP can be booted using Startup Manager, then the cable is probably faulty and should be replaced.
https://support.apple.com/en-us/HT1310
Ciao.

I powered up my macbook and there is a file folder with question mark on the screen flashing. What does that mean?

Powered up Mac book and screen showing file folder with question mark flashing?

A flashing question mark appears when you start your Mac
Hope that solves your issue.

When I start MacBook Pro13 shows gray Screen and flashing file Image with question mark

When I start MacBook Pro13 shows gray Screen and flashing file Image with question mark , it's brand new I just receive it from Apple Store .

Startup Manager to select Startup disk.
http://support.apple.com/kb/HT1310
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836

White screen with flashing file icon with question mark mean

What does this mean. We are getting a white screen with flashing file icon with question mark inside the file.

It almost certainly means it can't find a bootable volume (one with OS X on it).
Which means most likely you will have to find your original system installation DVD and install it. Then you should figure out what caused the problem.
Read this to diagnose it before resorting to reinstalling the OS:
http://support.apple.com/kb/TS1440
Excerpt:
Additional steps
If your Mac still starts to a flashing question mark, follow the steps below. If any step resolves the issue, you don't need to continue to the next one.
Select your Mac OS X startup disk with Startup Manager by restarting and holding the Option key. After your Mac starts up, restart again to verify that the flashing question mark does not appear.
If the issue persists, insert your Mac OS X installation disc. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc.
MacBook Air note: On a MacBook Air, there are two options for starting up from Mac OS X media: Either connect a MacBook Air SuperDrive to the MacBook Air via the USB port and restart the computer, holding down the C key during startup, or use Remote Install Mac OS X to startup from a system software DVD that's located on a partner computer. Once started up from Mac OS X media, skip to step 3.
Restart the computer, then hold the C key during startup.
From the Utilities menu, choose Disk Utility. Don't click Continue.
Select your Mac OS X disk (named "Macintosh HD" by default) in the left side of the Disk Utility window.
Click the First Aid tab.
Click Repair Disk to verify and repair any issues with your Mac OS X startup disk.
After repairing the disk, try to start up normally.
Important: If Disk Utility finds issues it cannot repair, you may need to back up as much of your data as possible (or use Time Machine to back up to a different disk), then erase the disk and reinstall Mac OS X. You should back up important files and data before erasing a drive. Erasing deletes everything on the hard disk (including things on your desktop). Also, you can install Mac OS X onto an external disk, start from the external disk, and use Migration Assistant to transfer items from your usual internal Mac OS X startup disk to the external disk, then erase the internal disk and reinstall Mac OS X.
If the issue persists, and Disk Utility didn't find any irreparable issues, quit Disk Utility, quit the Installer, select your disk when prompted, and restart.
If the issue continues, reset PRAM. Note: After resetting PRAM, if the computer starts up normally, reselect the startup disk in the Startup Disk preferences.
If none of these steps resolve the issue, start up from the Mac OS X Installation disc and reinstall Mac OS X.

27 inch Imac Intel won't boot up. Screen ligthts up, then shows a flashing file folder w question mark. What can I do to find the problem?

27 inch iMac Intel won't boot up. Screen lights up, then shows a flashing file folder w question mark. What can I do to find the problem?

Please readd Apple's trouble shooting steps in Flashing question mark appears when you start your Mac

Mac Shows Folder With Question Mark On Startup?

Hey Guys!
I currently own a Macbook Air First Genereation (2008) running on Lion 10.7.5 (upgraded from Snow Leopard)
Recently, when I was just using the Macbook Air, the Hard disk started spinning and was creating a lot of noise well I just ignored it and gave it a hard reboot
So the next day wehn I booted my mac it was showing a folder with question mark on startup. I tried going to recovery (holding option on startup) but neither Macintosh HD or Recovery HD was being shown. I tried a internet recovery but it was not even entering Internet Recovery. I tried Single User mode, that didn't work.
I really don't know what to do now, I am panicking cause I don't have a backup and all my schoolwork is inside there.
Please reply soon and thanks in advance if you can help me
A youtube tutorial or online step by step tutorial would be great!

My tutorial is simple: pack up the MBA and charger and head for the nearest Apple store or Apple reseller. The error you see can mean three things: (1) your drive's system files are damaged, (2) your drive's directory or partition are damaged, or (3) your drive is dead. The fact that you can't boot into the recovery mode pretty much eliminates #1. It is possible that your drive's partition table was damaged but were that the case I'd expect that Internet recovery would work. So I strongly suspect #3.

Folder with question mark and smiling mac face at start up

After I was importing some video today, shut down G5 and on start up I get the folder with question mark and smiling mac face.
Any help?
Power Mac G5 Mac OS X (10.4.8)

Boot from a drive with Disk Warrior 4, or your emergency boot drive (FW or alternate) or if you lack that, use single user mode to run fsck command. The last option would be your Tiger DVD but that may be 10.4.3 or earlier and not your best.
I say that because it seems like it was more than just needing to reset the startup disk preference and may have a corrupt directory. It shutdown smoothly and fully?
At the least, using the OPTION key and SHIFT key for Safe Boot. My recollection of trying to do both is that it won't. You can do one or the other, but not both. So running FSCK is just insurance to repair the directory.

When I start my macbook a flashing file folder with a ? mark appears in the middle of my screen.

When I start my mac book a flashing file folder with a question mark in the middle appears in the middle of my screen.

That folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the Operating System data on the hard drive is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Just press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Flashing folder with question mark at Startup

Here is what I know so far.
- The computer was powered off by pushing the power button without shutting down.
- The computer was then restarted and it was coming into the white screen with the Apple logo in the middle, but i noticed that it was skewed slightly (like someone took a 4:3 ratio screen and stretched it to a 16:9) and then it would show a circle slash icon and then the flashing folder with a question mark on it.
- It would not come up in single user mode (Command + S) and it said that there was an error loading kernel 'mach_kernel'
- It would not come up in safe mode (Shift)(The flashing folder came up again)
- I reset the PRAM (Command + Option + p + r) and it seemed to fix the problem with the stretched screen but did not help the boot situation (still got flashing folder)
- I did the start up where you can select the hard drive to boot with, it owed the HD and i selected it, but then i got the flashing folder with question mark.
- It would not come up in Verbose Mode (Command V) Error loading Kernel again.
- I bought a FireWire cable and hooked it to another MacBook Pro, and booted the faulty Mac into Target Disk Mode, the FireWire logo came up on the screen and bounced around like all forums said that it would, but the drive would not show up on my host. I checked the System Profiler on the host and it did acknowledge the Target Disk Mode was there, but the drive of the target would not show up on the host. I restarted the host, nothing. I checked all of the connections, nothing. I replugged all of the connections, nothing. I even reversed the FireWire cable, nothing.
- I have DiskWarrior 4 if i can get the drive to show up in TDM, but nothing so far.
Does anyone have any suggestions?

Thanks for your help guys. I managed to get the computer started by holding down C at the Start Up with the Install Disc 1 in the computer. The disc was really kindof unnecessary, as the newest version of Mac OS X (10.4.10) became available via the hard drive.
I then found out that the battery was not installed, so I reset the management system by removing the A/C power, the battery and pushing the power button for 5 seconds, and then reconnecting everything. It did not help, the battery is bad i guess, so I am going to call AppleCare and get a new battery.
Thanks for your help.

MacBook Pro flashes file folder with question mark and startup manager will not run

Similar Messages

Maybe you are looking for