MacBook Pro flashing folder with question mark - NO installation/setup disks

I recently bought my Macbook Pro in August of 2012 and I have noticed that the newer MacBooks do NOT come with additonal installation disks or anything of the sort. I started up my Mac today and was faced with the flashing folder with a question mark on it. I already know what this is implying and I have tried literally everything to fix it. It does not recognize command-R so I cannot choose HD recovery and when I try to perform "first aid" on it, it does not recognize my disk-0 and when I try to verify or repair, it does not let me. All options are greyed out. I have tried resetting the PRAM but that does not do anything either and I cannot boot it to single user mode. Please help. The last thing I want to do is bring it in for repairs as it is my last week of classes in university and I absolutely need my laptop for school work.

I recently bought my Macbook Pro in August of 2012 and I have noticed that the newer MacBooks do NOT come with additonal installation disks or anything of the sort. I started up my Mac today and was faced with the flashing folder with a question mark on it. I already know what this is implying and I have tried literally everything to fix it. It does not recognize command-R so I cannot choose HD recovery and when I try to perform "first aid" on it, it does not recognize my disk-0 and when I try to verify or repair, it does not let me. All options are greyed out. I have tried resetting the PRAM but that does not do anything either and I cannot boot it to single user mode. Please help. The last thing I want to do is bring it in for repairs as it is my last week of classes in university and I absolutely need my laptop for school work.

Similar Messages

  • Macbook crashed : Flashing folder with question mark (noise on hard drive)

    My macbook (intel core duo) just crashed a few days ago. This is what it's doing:
    The screen displays a a flashing folder with a question mark. I did find an article in apple for that : http://docs.info.apple.com/article.html?artnum=58042
    But the think is, it (macbook) turns off after a while. I did try to boot up with the installation CD, but it can't find my hard drive. So, I thought it must be a hard drive problem. And I could hear that the hard drive makes a noisy sound. So, before I run to bestbuy or futureshop to get a new hard drive, I wanna make sure that it's really the hard drive that went kaput!
    I was trying to install the leopard. It just crashed when I went surfing, and editing on iMovie.

    I have a MacBook 13" Core 2 Duo, 160GB HHD, 2GB memory. My hard drive appeared to "crash" a few days ago. Whenever I pressed the power button, I would eventually get a grey screen with a folder with a "?" in front of the folder icon. I decided to re-install OS X thinking this would resolve the issue. During the install process, I would eventually get to the point where I am asked which drive to install OS X. The computer didn't recognize the internal hard drive. I do have an external hard drive for backups and the computer did recognized this one (WD MyBook).
    I have since bought a new internal hard drive (Seagate 200GB 7200RPM 2.5" Mobile with Shock guard), installed it and went through the process of re-installing OS X. Again, the computer doesn't recognize the new internal hard drive. And again, the external hard drive is recognized.
    For the time being I've installed OS X in the external hard drive. But now I have a new internal hard drive but is useless since the computer will not recognize it.
    Anyone installed a new internal hard drive and experience the same thing as I have? Anyone with possible solutions or any advice you can offer?
    Thanks.

  • MacBook pro shows folder with question Mark

    MacBook pro (pre-unibody) is just showing a White screen with folder and question Mark in it. Is it a hard drive failure? What should I do?

    Hi Bobby,
    It does sound like the HD. Try booting from the install disc, then see if your HD even shows up in Disk Utility. If it does, check S.M.A.R.T. status and try running Repair Disk.
    First check the S.M.A.R.T. status on your HD: Applications>Utilities>Disk Utility>in the panel at left, select the first item in the list/your HD mechanism>look at the bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” or something more ominous like “Failing.”
    If S.M.A.R.T. status is "Verified," run Repair Disk: Boot from install disc (insert disc>restart>immediately hold down c key and keep holding it until you see “Preparing Installation”)>at first screen select the language and click Continue> click on the Utilities Menu in the menu bar>open Disk Utility>select your HD in the panel on the left side>click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications>Utilities>Disk Utility and run Repair Permissions.
    Message was edited by: tjk

  • Flashing folder with question mark at Startup

    Here is what I know so far.
    - The computer was powered off by pushing the power button without shutting down.
    - The computer was then restarted and it was coming into the white screen with the Apple logo in the middle, but i noticed that it was skewed slightly (like someone took a 4:3 ratio screen and stretched it to a 16:9) and then it would show a circle slash icon and then the flashing folder with a question mark on it.
    - It would not come up in single user mode (Command + S) and it said that there was an error loading kernel 'mach_kernel'
    - It would not come up in safe mode (Shift)(The flashing folder came up again)
    - I reset the PRAM (Command + Option + p + r) and it seemed to fix the problem with the stretched screen but did not help the boot situation (still got flashing folder)
    - I did the start up where you can select the hard drive to boot with, it owed the HD and i selected it, but then i got the flashing folder with question mark.
    - It would not come up in Verbose Mode (Command V) Error loading Kernel again.
    - I bought a FireWire cable and hooked it to another MacBook Pro, and booted the faulty Mac into Target Disk Mode, the FireWire logo came up on the screen and bounced around like all forums said that it would, but the drive would not show up on my host. I checked the System Profiler on the host and it did acknowledge the Target Disk Mode was there, but the drive of the target would not show up on the host. I restarted the host, nothing. I checked all of the connections, nothing. I replugged all of the connections, nothing. I even reversed the FireWire cable, nothing.
    - I have DiskWarrior 4 if i can get the drive to show up in TDM, but nothing so far.
    Does anyone have any suggestions?

    Thanks for your help guys. I managed to get the computer started by holding down C at the Start Up with the Install Disc 1 in the computer. The disc was really kindof unnecessary, as the newest version of Mac OS X (10.4.10) became available via the hard drive.
    I then found out that the battery was not installed, so I reset the management system by removing the A/C power, the battery and pushing the power button for 5 seconds, and then reconnecting everything. It did not help, the battery is bad i guess, so I am going to call AppleCare and get a new battery.
    Thanks for your help.

  • Flashing Folder with Question Mark after Trackpad 1.0 Update

    My machine won't boot after installing this update. I get the flashing folder with question mark and can't even boot from the Install DVD either... I just get a frozen spinney wheel at the Apple Logo screen. I've tried resetting the PRAM and everything else that a Googling of the problem suggests. This update bricked my Macbook!!!!
    Anybody else having this problem? Anybody have any suggestions or am I stuck with going to see a "genius"?

    I've not seen any other posts about it causing problems, worked fine here. You've tried resetting the PRAM the only other thing you could try is:
    Boot holding down Apple/S and don't let go until you see scrolling text.
    When that stops and you see a root#: prompt enter
    fsck -fy
    Let it run through all the checks and repairs.
    If it fails first time, at any time, or finds and fixes a fault - run the command again and keep doing so (some fixes can take several passes) until it says "Appears to be OK" then enter
    reboot

  • Flashing folder with question mark on screen

    flashing folder with question mark on screen

    This is the first time I have joined the support forum for MacBook - I tried the after Power Off - then while you turn it back on again your hold the "Command + R" - This has worked for some people - this was obtained on YouTube - see www.youtube.com/watch?v=flv2ebQMMtE.  This however, did not work for me.  I remember having a problem with my PC a few years ago - when I experienced something like this on it.  I fixed it by taking out the battery.  I was going to check the cable between the hard drive and the motherboard to make sure it was secure.  I removed the Battery on my MacBook - blew it off, and put it back in again and surprisingly it booted up normally.  Thanked the Lord for the quick fix.  Back to Normal. 

  • HT1366 How to fix Flashing Folder with Question Mark on Mac

    How to fix Flashing Folder with Question Mark on Mac

    RichardEL is probably correct.  I’ll go through your questions.
    > there is no Mac OS partition, I assume it would be directly underneath the HD on the left?
    I have not seen this particular condition where the hardware disk icon appears but the system volume that is supposed to be below it does not.  The System Disk partition would be below the HD icon indented to the right.  It is usually called “Macintosh HD” unless you renamed it.
    > when I go into disk utility my HD appears on the left, but I can repair or verify it
    Odd.  It appears but you cannot manipulate it with Disk Utility.
    > The S.M.A.R.T status reads verified
    If it did not say Verified then it would indicate a problem.  Saying Verified does not rule out problems but I think it indicates it is still breathing.
    > Is the HD deceased?
    If you booted the Recovery Partition (Boot, Command-R), which it sounds like you did, then at least part of the disk is still breathing.  If it took a long time to boot then that may have been a Network Recovery boot which would indicate the disk is very sick or dead.
    >  [If I] restore from time machine [will] everything will be back as it was before?
    Yes.  That is the beauty of Time Machine.  All your data, applications, and system preferences will be as they were as of the last backup.
    > I was thinking of erasing the HD, would this be of any help or do I just need a new one?
    Given what you reported from the Disk Utility steps you took it is unclear to me if there will be a way to repair the current volume, if you can erase and install from scratch or if you need a new disk.  Before proceeding it may be useful to have an expert at an Apple store look at it for you.  They may be able to revive it without a clean install or new disk.
    As was the case above, it could be a good disk with a bad cable in which case a new disk is not going to help.  To test this you can purchase an inexpensive external enclosure, remove the internal disk, place it in the enclosure, plug it in and then use Boot-Option to attempt to boot from the now external disk.  Here are links to the screwdrivers and enclosure you would need.
    $5 Toolkit: http://eshop.macsales.com/item/OWC/TOOLKITMHD/
    $22 USB 3.0 enclosure: http://eshop.macsales.com/item/OWC/ES2.5BU3W/
    If you attempt a clean install, use the Partition tab to repartition the disk, selecting one partition and with “Options…” electing a GUID partition.  Then use the Erase tab, select “Security Options…” and set it to write a single pass of zeros.  This will write to every sector to map out bad blocks.  (If you have an SSD do not write a pass of zeros.)
    If you do need to replace it I recommend an new inexpensive (~$100) and super-fast hybrid SSHD drive that has an 8 GB SSD cache that makes the data fly.  Google “Seagate 1 TB hybrid SSHD”.

  • Flashing folder with question mark comes up at startup?

    it was working fine 3 days ago i try start it up and a Flashing folder with question mark.
    It has mountain lion i try to boot to recovery Part but when i hold the Option key nonthing show up.
    If some can tell me what else i can.

    restart holding command R  if it can not find a Recovery partition it will do a Internet Recovery.
    Run diskUtility "repair disk" from the recovery.
    http://support.apple.com/kb/HT4718

  • Flashing folder with question mark on start up + many other issues

    About 6 months ago I first encountered the flashing folder with question mark on startup. I fixed the issue myself by unplugging the mouse and keyboard and rebooting. I also did the cmd S fsck -fy before that and all was well.
    The other day I had the flashing folder again...I got it going a couple of times but it happened again. Right now I seem to be in deep trouble. Please read the following:
    1. I booted up from the leopard dvd and no hard drive was there to run a disk utility on
    2. Booted up again from the dvd and hard drive was there. Ran the disk utility and everything was fine...for about 5 minutes. Then the computer froze and I had to hard power down. Rebooted to the flashing folder.
    3. Did command s and fsck but at the end I get the message failed to issue comm reset after 3 attempts.....failing....
    4. I powered down, vacuumed out the vents, sprayed compressed air to make sure it wasn't over heating from dust buildup as I read somewhere.
    5. Booted up...worked for about 5 minutes again.
    6. Now I can't get to the hard drive from the install dvd at all...I tried 100 times. Cmd s won't work at all!! So it looks like I am out of options. Does anyone have ny radical solutions that i can try to fix this. There are some very important things on my hard drive that I would be very upset about loosing.
    Please reply

    Sorry to bear bad news, but most likely the drive is already dead or dying. I hope you backed up everything when the first symptoms appeared.
    There are data recovery services, but might be very expensive.
    EDIT: Some (a few) people have had success putting the drive (sealed very well in a plastic baggy) in the freezer overnight and then quickly putting it in an external enclosure and getting the data off it that way.
    Message was edited by: WZZZ

  • Flashing folder with question mark only on sartup.

    Flashing folder with question mark only on sartup. Won't recognise ANY startup key commands (tried different keyboards) and won't recognise OSX startup disk. Any ideas??

    The first thing I'd do is look at the silver side of the SL installation disc and check for finger prints or scratches and gently clean the disc with a lint free cloth. Also, instead of formatting the hard drive it would be worth deleting the partition(s) and repartitioning.

  • Flashing folder with question mark (MacMini)

    Hi there,
    I diagnose my Mac Mini (1.83Ghz, Intel Mac) and know that the HDD is failing, so I decide to change the HDD before the HDD totally fail.
    But after I change the new HDD, and trying to install the OS back to the new HDD, I get a flashing folder icon with question mark in it, when I boot it up and press on the C key to boot from CD.  So I decide to take the new HDD back out, put in an external enclosure to make sure that the new HDD is not a bad one, and I can read fine with it inside the enclosure, put it back in the Mac Mini, still the same old flashing icon.
    What happen?  Could someone help me please?
    Thanks!

    Hi Everyone,
    Just for future reference for anyone who encounter this same problem, the reason that I go the flashing folder with question mark is first of all, the MacMini doesn't recognize the new hard drive.  No doubt about that since the hard drive has no OS and not formatted yet.  Second of all, it's because I don't have the correct Installer CD put in.  I didn't know if there's any difference in the Installer CD between PowerPC MacMini and Intel MacMini, but obviously there is, since the Intel MacMini doesn't recognize the PowerPC Installer CD.
    After putting the correct Installer CD in, everything works just the way it should.
    Thanks for all your help, everyone!
    - NyCCD

  • Folder with question mark + wont boot from disk

    Hi
    I am trying to reinstall a powermac g5 from the disk, using a old hard drive that works.. (formatted in NTFS) (hoping that when selected to boot from disk, mac will then erase and reformat it)this image is presented when i hold down the option key and the disk ejects this other image is presented when i hold down C (folder with question mark blinking) and the disk ejects... also presented if i boot normally.... Could some help be offered please??????
    Powermac G5
    Thank you in advance

    Yes, you must Format it HFS+ first...
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    How to format your disks...
    http://www.kenstone.net/fcp_homepage/partitioning_tiger.html
    (To Install OSX on an IntelMac the Drive it needs the GUID Partitioning scheme mentioned at the bottom.)
    Thanks to Pondini, Formatting,  Partitioning, Verifying,  and  Repairing  Disks...
    http://web.me.com/pondini/AppleTips/DU.html

  • Netboot will not working, getting globe, then flashing folder with question mark.

    I just created a netboot image which went off without any problems.  I copied the two .nbi folders to my NetBootSP0 folder, and enabled them within netboot.  My OS X server which is my netboot server and dhcp server.  When I boot using N or Option N, I get the flashing globe for several seconds, the request goes through to the server and gets ACK {SELECT} however a few more seconds after, I get the flashing folder and question mark before it does a normal boot.  I have read the other posts about DHCP and Subnets.  My server and and clients are all 255.255.0.0.  Any suggestions would be very helpful as I need this to work for several buildings. 

    This might work for some:
         I had the same problem of the netboot image not mounting/opening, spinning globe then booting back to the Mac HD on the client and it was only when I remembered that we had manually experimented with jumbo frame rates and the MTU settings for our 32TB RAID in the Hardware settings for Ethernet ports on our servers. I turned the settings back to "Automatic" and 1000baseT on, then the whole NetInstall and Neboot was working perfectly again.

  • Flashing folder with question mark, apple logo, and do not enter symbol

    someone please help.
    i just took my imac to the apple centre and they erased everyhting and reset everything, and now it has just asked me to restart it so i did and now im stuck on flashing apple logo, flashing folder with quesiton mark inside, and a "do not enter" sort of symbol.
    please please please help, i cant go back to apple as i spent so much money already!

    Lion and Mtn Lion don't come on disks (the USB flash, AFAIK, is no longer available). You could boot into the recovery mode and reinstall. Details in Recovery and About Lion Recovery. Also, see the Internet Recovery.

  • Flashing Folder and Question Mark, no installation disc

    Yesterday, Safari froze up while I was it which I have never had happen before. So, I manually shut my Macbook off and tried to restart. When I did so, I received a gray screen with a flashing folder and question mark. From my research, I have found that usually this means that my laptop can't find the operating system and this issue can usually be resolved by inserting the installation disc. Problem is, I bought my Macbook secondhand and never got an installation disc. Does anyone know of a way around this issue? Or if buying the Snow Leopard upgrade for $30 instead of buying a whole new package for about a hundred dollars more might resolve this issue?
    Thanks so much,
    Kristin

    Yes, quite a quandary. You have some options:
    1. Call AppleCare and ask for customer support. You can order replacement discs for the model you have.
    2. Purchase an OS X retail installer suitable for your model, like Snow Leopard, that you can use to determine if you can repair the hard drive or will nee to reinstall OS X. If the latter and you are using Snow Leopard, then you just install it. The installer will determine whether to upgrade or not automatically. As long as your drive is OK Snow Leopard will not erase the drive so all your files are safe. If you use an earlier version of OS X then you want to choose the Archive and Install option. See the following:
    How to Perform an Archive and Install
    An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
    1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
    3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
    4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
    5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
    6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Maybe you are looking for

  • Returning complete freeze

    Hello everone! This has been happening and bothering me for a while now: Everytime I do heavy work on my computer (in this instance FL studio on paralells desktop, or running a server for a game) The chance occurs that the following chain of events h

  • Domain Level and Backup AD as VM?

    We're currently running Windows 2012 R2 Essentials (25 users license default) as the DC.  We're thinking to have the 2008R2 as the secondary (backup) DC.  Questions are: 1. We have AD recycle bin enable, would it cause any issues lower the domain lev

  • Check Your Plugins gives a wrong answer about Shockwave Flash

    Fist of all, the page lists [http://www.adobe.com/products/shockwaveplayer/ Shockwave Flash] but it reports details about [http://www.adobe.com/software/flash/about/ Macromedia Flash]. This is in concert with the terminology used in the Plugin Manage

  • UNABLE TO VIEW AUTHENTICATED_USERS GROUP IN ODM

    login ODM as orcladmin(super user), when click Authenticated_Users group and then it just hangup, but other options are working fine.

  • ECCS - deactivate message

    Hi, When posting a document in ECCS I am getting standard SAP yellow message. In the other system I do not get such a message. My quesiton is - Is there any general advise how to find where I can activate/deactivate particular message. It is standard