Macbook pro late 2011 Not installing Mountain Lion
How do you boot from mountain lion installaion Because now it's just opening in lion rather than on startup?
I have already installed it from the mac app store, i open it from the launchpad but it does not open in a boot kind of mode, it only opens as if it's an app.
Similar Messages
-
Hello,
Mountain Lion is great, but i have been facing some difficulties, first of all my apps were gone i had to reinstall all most all of them.
That is not the big problem, the problem is that whenever i open apps like photobooth, lightroom, or vlc my color tone changes. This is used to happen when I opened really intense apps eg mafiaII or like GTASA. Is there any way to disable this?try disabling it, take a took at these snaps from my phone. Might not be really clear but can give you an idea
Hope this is clear,
Thanks for the suppport
Nazmul -
Macbook Pro late 2011 not powering on. The charger shows a blinking dim orange/green light. I have tried pressing the small button on the side of the macbook pro to check the battery, but no lights show up.
Hey Angelo_here,
I'd run through these steps:
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
via: Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Welcome to Apple Support Communities!
Regards,
Delgadoh -
Hi guys,
I would like to use airplay mirroring on apple tv (3rd generation) with my macbook pro late 2011, unfortunately the airplay option does not appear in the display preferences (see screenshot below). Did someone have this problem before? Please advise!
Thank you!
TialWelcome to the Apple Support Communities
See > http://support.apple.com/kb/HT5404 Your computer is compatible with AirPlay Mirroring, but you have to upgrade to OS X Mountain Lion to get AirPlay Mirroring.
Make a Time Machine backup and/or a clone with Carbon Copy Cloner, open App Store and purchase Mountain Lion. When the download finishes, the installer will appear, so follow the steps to upgrade. To turn on AirPlay Mirroring, select the AirPlay icon in the menu bar or open System Preferences > Displays -
Help! MacBook Pro Late 2011 Not Charging
My MacBook Pro Late 2011 is Not Charging. I have tried plugging it into multiple outlets and none have succeeded. He is a screenshot of my System Information>Power: http://grab.by/tkOM. I have no clue what happened. Last night we had a massive storm, but I don't believe there was any thunder or lightning. Whenever I plug the adapter into an outlet, the battery usage in the top right hand corner shows the "plugged in" icon, then it shows the "charging" icon. Then it just goes blank and back to normal. I have tried to restart it and do the SMC or whatever, but nothing seems to work. I have had this charger for a little bit over 1 year. Thanks in advance!
- Sellers C.Hey Angelo_here,
I'd run through these steps:
If your computer won't turn on, try each of these steps:
Verify you have a good connection from your Mac to the wall outlet by confirming the power cord and adapter if present are securely connected and plugged in. To check if the wall outlet is working, plug in a lamp or other electrical device.
If the wall outlet is working and you continue to have no power try another power cord or adapter if available. If it works you may need a replacement cord or adapter.
Note: See Apple Portables: Troubleshooting MagSafe adapters for further troubleshooting with MagSafe adapters.
Disconnect all accessories that are plugged in to the computer, such as a printer, hub, or other mobile device.
If your Mac supports user-installable memory, solid state drive, or hard drive, and you recently installed any of these, make sure they are installed correctly and are compatible with your computer. If possible, reinstall the original memory or drive into the computer to find out if the behavior persists afterwards.
MacBook Pro: How to remove or install memory
MacBook: How to remove or install memory
Mac Pro: How to remove or install memory
Mac mini: How to remove or install memory
iMac (27-inch, Late 2012): Installing or replacing memory
iMac: How to remove or install memory
Reset the SMC.
If you are still unable to start up your computer after trying each of these steps, visit an Apple Store or Apple Authorized Service Provider (AASP) for further diagnosis. If you plan to visit an Apple Retail Store, make a reservation at the Genius Bar using http://www.apple.com/retail/geniusbar/ (available in some countries only).Note: Diagnostic fees may apply for issues not covered under warranty or the AppleCare Protection Plan (APP).
via: Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Welcome to Apple Support Communities!
Regards,
Delgadoh -
MacBook Pro late 2011 not switching to ATI graphics when running off mains power.
Hi there.
My MacBook Pro late 2011 doesn't appear to be switching to ATI graphics when running off mains power. It always seems to stay on the Intel adapter instead. I've checked the option in the energy saver settings and it's ticked to "Automatically switch..." and when I untick this box, it switches to ATI and stays that way even when running on battery (as expected). Either way it will not switch to ATI graphics when plugged into mains unless forced to in this way.
Any one else seen this? Very frustrating when trying to run an external monitor with the Intel adapter!
Thanks in advance.
Dan"As a last resort I opened the bottom cover and disconnected the battery power plug (MagSafe adapter also disconnected)."
After everything was disconnected did you press the power button and walk away for 5 minutes? Try that, just had one restart after waiting for that long. -
Macbook Pro (Late 2008) versus OSX Mountain Lion
Kuzuzangpo:
I've been updating most OS updates on my Macbook Pro (Late 2008) via the App Store. The process has worked seamlessly so far. I love Apple. I wanted to ask if I should update to the Mountain Lion OS as well on my old Macbook? The App Store reviews state that it slows down the Macbook considerably. I am also thinking of getting the new Macbook Pro (with Retina Display) but want it in a 13". So far, there's only the 15" which - given my current Macbook and type of work now - is a bit too bulky to lug around. Any advice is most appreciated.
KadrincheyI have already installed it from the mac app store, i open it from the launchpad but it does not open in a boot kind of mode, it only opens as if it's an app.
-
hello anyone i have a late 2011 macbook pro that i purchsed second hand it already had lion installed i wanted to install mavericks which I tried a four digit pin code came up thus locking my mac I took it to the geeksquad they wiped my harddrive and tried to renstall the OX they said they could not do it because a firmware passcode or filevault passcode was on it so I now have a brick can anyone help me fix this problem thanks for any info
Pawn shop! They only looked after it for a stranger then the ticket ran out. Will apple accept that sell-on as a bill of sale? I'll give you 50:50 chance on that. Did you see Apple recently refused to unlock an ipad left to a guy by his mother who died of cancer. Apple wanted a court order! (Til it got on the national TV news).
Someone will have to produce the original owner's bill of sale I reckon. -
My macbook pro late 2011 not working, Yosemite ? please help me
I AM SO SAD.
SECOND DAY OF SADNESS .
WHITE SCREEN BLUE SCREEN EVERYWHERE .
I don't know how to explain myself well so i try tell you guys by order of what heppand (macbookpro late 2011 i7 16giga ram)
so that's what happened;
1. i have a macbook pro i am happy its working amazing with mavericks
2. i love apple (RIP Mr Steve Jobs) So i downloaded a BETA of yosemite and installed it (i sign in the beta download it and install it 3/4 months ago I have TM to.)
3. i don't like it after a week, it was in his diapers and almost all with problems.
4. i connected my TM and restore my old computer.
5. i notice that some times the upper bar (finder and clock is kind of see-throgh and the clock is stuck.
6. i got some times blue screen when i started my computer, but i always got it runing after reset.
7. i got some wormup and reset by-him-self problems. but just SOMETIMES.
8. two days ago,i came home,and my computer was hot, and black screen.
9. i reboot and i always got that same blue weird screen or gray.
10.ive trid - recovery from the Internet - gray screen,open recovery disk - grey screen, i fsck like 5 times and nothing happen fsck said all is good with hd
11.i went to the store and bought a new 1 tera Toshiba HD
12.no recovery from the Internet like before, its just coming back to grey screen.
13.i take out my new HD and conected it to another mac,and made it mac format
14. i made a bootable yosemite on usb from terminal
15.i connected it i can see the bar going just with apple logo and then ? yes gray screen again.
16.im on apple discussion, somtimes looking at my macbook pro, with some tears but it will be ok
CUS YOU HAVE TO HELP ME I TRUST YOU .
THANK YOU FOREVERThe moderators deleted the image that I had in my first response because I has the battery serial number displayed.
Here it is again from System Information>Power. Would you please post from your MBP and we might pick up some useful information.
Also run an Apple Hardware Test:
http://support.apple.com/kb/ht1509
Ciao. -
Hello, hello
After waiting quite a while - I paid the relatively small amount, and got myselves a new OS.
But I am very disappointed of the speed - I see that this also was a problem with OS Lion?
Please assist me. Perhaps others have this problem as well?
Some info:
- 2,66 GHz Intel Core i7 processor
- 4 GB 1067 MHz DDR3
Also
- Sometimes I run the Parallels Desktop 6 and 9 software, does this affect specs of the new OS?
Hope to hear from you guys.
Sincerely,
HaraldWith only 4GB of RAM, how much do you have devoted to the virtual machine running under Parallels? Even if it's a small amount, it's going to make page outs and swaps used very high. From my perspective, 8GB of RAM is the 'sweet spot' for running Mountain Lion.
I'm assuming that you've a 15" mid-2010 MacBook Pro? If so, you can speed things up by installing the maximum 8GB of RAM. Go RAM shopping at Crucial or OWC.
Other than upgrading your RAM, the only thing that you can do to speed up your machine is to install a SSD. You can also check the SSDs at Crucial and OWC and decide if one is right for you.
Clinton -
MacBook Pro Mid 2010 Not liking Mountain Lion...
I finally decided to switch from Lion to ML on my Macbook Pro 13 inch Mid 2010. The problem I am having is now on ML flash seems to be killing CPU. Temp raise to 70 C and fan goes to about 4-5000 rpm when watching videos online. Any help on how to fix this issue ?
Things I have Already done:
1. Uninstalled any past Flash versions.
2. Check and Installed the latest version.
3. installed 'ClickToFlash' Extention For safariThis is all the info copy and pasted from that screen:
Battery Information:
Model Information:
Serial Number: 9G027008UD3MA
Manufacturer: DP
Device name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0201
Hardware Revision: 0002
Cell Revision: 0158
Charge Information:
Charge remaining (mAh): 5253
Fully charged: Yes
Charging: No
Full charge capacity (mAh): 5294
Health Information:
Cycle count: 237
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12445
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 2
Wake On AC Change: No
Wake On Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0000
Wattage (W): 0
Revision: 0x0000
Family: 0x0000
Serial Number: 0x00000000
Charging: No -
I am running 10.10.2 OS X Yosemite, and here are the requirements for the Warcraft 3 I want to buy on ebay:
Single-Player Mac System Requirements
MacOS 8.1 or Higher
G3 Processor or Equivalent
64 MB RAM plus Virtual Memory
650 MB available hard drive space
4X CD-ROM drive
Video support for 256 color display at 800x600 Resolution
Multiplayer Mac System Requirements and Options
64MB RAM plus Virtual Memory
950 MB available hard drive space
28.8 Kbps or faster modem
Up to 8 Players over TCP/IP Network or Battle.net® (Requires low-latency Internet connection with support for 32-bit applications)
Optional Mac 3D Acceleration
Supports Glide™, OpenGL (v.1.1.2 or higher), or RAVE
PLEASE HELP?bradhamer12345,
this could be due to a problem on your disk. You can try this to see if it makes a difference: boot your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. -
Macbook Pro Late 2011 not recognising Ethernet Adapter after upgrade to Mavericks
Hi everyone
I updated from Mountain Lion to Mavericks (I deleted all the files and made a fresh install), but since then my Ethernet adapter stoped working! when i see the system report i find this information
i've tried reseting PRAM and others and didn't result in anything
when i go Networking Settings i don't find anything related to Ethernet AdapterOk. Thought I would check just in case.
We could try to remove the System Configuration which includes lots of setting files that relate to networking.
If you want to do this then go to Macintosh HD>Library>Preferences and there will be a folder at the bottom called System Configuration. If you delete this, (type in your password to confirm your sure you know what you're doing) and then you need to restart the machine.
The reason for the restart is that when your machine starts back up it looks for the system configuration and because it isn't in folder we just deleted it from, your Mac creates a new copy of it.
Give this a go and let me know.
-Dib -
MacBook Pro Late 2011 10.7.5 won't detect external monitor
Hello,
I have a Macbook Pro Late 2011 13" Running OSX Lion 10.7.5. It won't flash blue at ALL when connected to an external display. Under system report, it shows that the "Link Status" is 7. The same setup works with another MacBook Pro Mid 2009 15 inch. I am under AppleCare, should I take it in? Weird. All firmware updates are completed, no "Air Display" type programs are installed currently, and gfxcardstatus is also installed and doesn't really help.Looks like a problem with the GPU (possibly the screen, but it looks more as if it's the GPU). If I were you, I'd take your machine into your local Apple Store or an AASP and have it diagnosed.
Clinton -
15" Macbook Pro late 2011 is running hot.
My 15.4" Macbook Pro late 2011 (box instalation) is running hot at 200F and the fan jumps to 6000rpm without any real reason.
I know it is not normal, what can I do? Clean install or service?Thanks guys,
Hardware testing passed.
Did a SMC reset and it seems at least for now that the RPM jump happens more smoothly and not to 6000rpm.
I will try this weekend to stress it a little and see how it behaves. (I will also upgrade the memory to 8GB)
In the end I think I will do a clean install and see I there will be any more improvements.
I'll keep you posted.
Maybe you are looking for
-
Lion takes 15 seconds to log in after reboot on Macbook Pro 13" (early 2011)
I have been having sluggish performance (repeated beachballs, etc.) on my Macbook Pro 13-inch (2.7 GHz Intel Core i7, 4 GB RAM), which I bought this summer pre-installed with Lion. I didn't migrate my old system, I just installed everything on my new
-
HMRC tools won't work on my iMac but will load on another iMac of same spec.
HMRC PAYE Tools stoped working so I did a full install and re load of this software but when opened it opens a box that says it's creating history tables and just hangs there. I've tried in stalling the same download on an identical iMac and it works
-
Help with a new install of Adobe Acrobat
I just had to install Adober Acrobat on a new laptop, and I need to point it to all the forms I was tracking on my old laptop. How do I go about doing this?
-
Can't over ride "Secure connection failed", no over ride option shows.
Secure Connection Failed I have connected to this page many times before. Emptied cache and cookies last night. Now FF won't allow site. There is no "Allow" option showing on warning screen. How can I over ride/ allow? An error occurred during a conn
-
Where is the backup data filed?