MacBook Pro mid 2010, gray screen at start up, boot from dvd not working.

Backstory:
I was in the process of installing Windows 7 using boot camp, but I was a little bit low on HD space. So, I deleted the user account that had a ton of stuff, and did some other crap that messed up my hard drive. So my computer just won't boot. It shows a gray screen 24/7, going into safe boot/safe boot + verbose doesn't fix the problem. I tried booting from an OSX Leopard dvd, but it won't work when I hold down C, and when I choose the Mac OS X Install DVD option after holding the option key, when I click the arrow button it freezes and doesn't boot. I have Lion installed, and apple says not to boot with an older version of OSX DVD, but there is no Lion DVD.
What do I do?
PS: I'm trying to boot using the DVD so I can reformat my hard drive, trying to do so in Recovery HD doesn't work because it says it 'Can't unmount drive'.

Rockswim,
did it do that only once, or does it do that every time you restart it?

Similar Messages

MacBook Pro Mid 2010 13", Lion 10.7.2, keyboard backlight / ALS not working

Since upgrading to Mac OS X Lion I have had problems with keyboard backlight and the ambient light sensor. I realized that the problem seems to be caused by ambient light sensor or hardware detection issues. LCD is not auto-dimming with light intensity variation. Since then I've done a Snow Leopard clean install and upgraded to Lion with no success. Then I have done clean installs of Lion using USB Keys with versions 10.7.0, 10.7.1 and 10.7.2 and the problem persists. Under Snow Leopard everything works like a charm.
SMC and PRAM reset did not solve the problem.
When I press F5 and F6 to adjust the backlight nothing comes up on the screen.
No settings under Keyboard menu.
Any ideas on how to solve this?

Max,
I have the same model MacBook Pro as you. Have you tried erasing your internal disk, reïnstalling Snow Leopard from your grey Mac OS X Install DVD, and running Software Update to get it to 10.6.8, to see if it also misbehaves under Snow Leopard?

How to download macbook pro (mid 2010) drivers for windows 7, without the included DVD (lost) ?

Hello everyone,
I am facing a problem with bootcamp on my Macbook pro 15" (Mid 2010, running Mos OS 10.6.6).
I have successfully installed windows 7 via Bootcamp, but I lost the Drivers DVD furnished by Apple.
I tried to download these using Bootcamp (v3.0.4), but bootcamp won't let me save it, i get this error :
"the windows support software could not be saved to the selected folder"
An Apple support article has been made for this problem ( http://support.apple.com/kb/TS3648 ), but it doesn't solve the problem in my case because I lost the furnished DVD.
So here I am, struck on this drivers issue...
So, my question is :
How to download macbook pro (mid 2010) drivers for windows 7, without the included DVD (lost) ?
Thank you for your help !
Regards

Aw, and I forgot, being in Thailand, they do not sell the installation DVD.

My MacBook Pro (mid 2010) won't startup correctly in my admin account, but works fine if I use the guest account...

My MacBook Pro (mid-2010) suddenly stopped working when I was overseas, but I managed to fix it when I returned back to the States after I reformatted and erased the disk, then installed Yosemite. I lost most of my files but didn't really care, though I noticed that some pictures from iPhoto had survived and were in the Trash folder.
I thought I could copy/paste them back into iPhoto, but it wouldn't let me since they were still in the trash. I started getting an error message for EACH PICTURE saying it couldn't be copied because it was in the trash, and when I realized that I'd have to click "ok" 644 times (once for each picture), I tried to restart, then shut down, and eventually forced a shut down by holding down the power button. This is where the problem started...
After trying to startup again, I was able to login to my admin account, and the desktop image would load, but I'd get the spinning rainbow wheel and the computer would remain frozen like that from then on. I tried to repair the disk (there was nothing wrong), and even re-installed the operating system again, but still the problem persists. BUT, if I login with my guest account, everything works fine.
I'm guessing it has something to do with it somehow being frozen on those error messages for those 600+ pictures, but I have no idea how to fix/unfreeze it. Any tips or suggestions?

mozak wrote:
Can the use of SATA3 instead of SATA2 hdd lead to some issues with my macbook?
I can try to find and buy new SATA2 sdd hdd but they are expensive and I'm not sure it will fix the restarting issue.
SATA3 is backwards compatible with SATA2. That is not likely to be your problem.
Based on what you have done, I suggest a reinstall of the OSX.
Ciao.

MacBook Pro mid 2010 goes to sleep right after booting

Hello and thank you in advance to anyone that can help me. I have a MacBook Pro mid 2010 and I recently spill tea on the computer. I took everything and dried out everything hoping and praying that it will start again. I put everything back together and it started but right after starting (like 15 seconds after) the monitor goes to sleep right away. But here is the weird thing; I have Windows 8 installed on bootcamp, so if I start on bootcamp, it starts with no problem. I am actually writing this from my macbook but on bootcamp. Any ideas why it goes to sleep on Mac but in Windows seems to be working just fine?

Power or other problems related to unexpected system sleep, shutdown, lights or fans call for an SMC reset. Read all the steps.
Before Resetting the SMC
Try each of the following steps in this order before you reset the SMC. Test the issue after completing each troubleshooting step to determine if the issue still occurs.
Press Command + Option + Escape to force quit any application that is not responding.
Put your Mac to sleep by choosing the Apple () menu from the upper-left menu bar and then choosing Sleep. Wake the computer after it has gone to sleep.
Restart your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Restart.
Shut down your Mac by choosing the Apple () menu from the upper-left menu bar and then choosing Shut Down.
Resetting the SMC on portables with a battery you should not remove on your own
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if it's not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time. The power adapter indicator light will cycle off / on once.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.

WORKED FOR ME : MacBook Pro mid 2010 black screen problem

Hello
Good news 'til now :
Like for some mid-2010 macbook pro owners, I started to have a recurrent (daily) problem : when I was using the trackpad to do something in Opera, Safari or QuickPick (Launchpad clone), I had very often seen suddenly my laptop seem to turn off but not really (the screen turned off, no key to bring it back, power button disabled, it was like sleep mode but without typical sleep mode light and with nothing to do to wake it up, even the caps lock key didn't worked anymore). Each time I was forced to turn off by maintaining the power button.
The problem could occur three times a day or more.
I'm on 10.6.8.
I installed the Video Update 1.0 for mid-2010 macbook pros you can find on the Apple site. It seemed to solve the issue for one day, maybe two but it used to reappear the same way as before. Repairing permissions with Disk Utility changed nothing to that. I disabled hardware acceleration in Opera Preferences, zoom feature in QuickPick, disabled graphics cards switch in OS X Power Saving Preferences. Useless.
Then I remembered I used a software when I encountered other problems with my 2006 macbook pro. It's called Kext Utility (very easy to find on the web). It specifically repairs the kernel files structure and updates the kernel files cache. The problem I describe is actually related to a kernel panic. So I re abled the graphics cards switch and by caution I overwrote the Video Update 1.0 by reinstalling it, the laptop rebooted to finish it, and right after that I launched Kext Utility (it takes about one minute to repair and update). Since that the problem totally disappeared. I don't risk to re abled either hardware acceleration in Opera or zoom feature in QuickPick but I probably will now I know how to get rid of this very inconvenient problem.
Hope it will work for you guys

For those who use QuickPick, I've just reenabled the zoom feature (Preferences > Show/Hide Option) and the problem is back very quickly. It's gone as I disable the zoom again. So I advise you to keep this option disabled if you've got the same problem as me.
I haven't reenabled hardware acceleration in Opera, no problem with Opera up to now.

MacBook Pro 15in showing gray screen on start-up

Okay, so basically trying to format my Macbook pro, I guess I deleted the software on my computer as well. Stupid me, didn't back my computer up. All that shows, is a gray screen with a folder with a question mark on it. I have the OS installation disk on an external CD-ROM drive and all that pops up when it's plugged in is the apple logo. Ive tried CMND-R, CMND-C, CMND-V, and just simply pressing the option button at startup and nothing has seemed to work, i end up at the same screen. When I just did the option, it gave me the opportunity to use the disk, but it goes right back to the apple screen. If anyone could help, that'd be FANTASTIC. Please!!

You have a Retina model MBP. It did not come with installer discs. You would use Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Macbook Pro retina display gray screen on start up

New Macbook pro 1 week old gets a grey screen on startup
Tried to do a safeboot but it stops after 5 lines.
any ideas???

You have a Retina model MBP. It did not come with installer discs. You would use Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Gray Screen - Mac Won't boot from DVD, Please Help!

Hello all
I have an issue. A big issue in fact. I made a fatal mistake of not reading whether my Mac Pro (1,1 1st Gen, 2006) supported Windows 7 64-bit. So I installed via the Bootcamp installer on a separate internal HD and ever since my Mac Pro will not boot up, it just boots into a gray screen and I get the spinning wheel of death. I can however, boot into Safe Mode.
Throughout the years and many moving of houses has meant I have lost my original install disks, so I purchased a retail copy of Snow Leopard (10.6.3 / MC573Z/A). My thinking here was that something is obviously screwed and perhaps a good ol' fresh installation of OSX would do the trick. My Mac originally came with a version of OSX older than Snow Leopard so I'm not violating the can't-install-using-an-older-version-that-what-your-Mac-came-with rule.
Cutting a long story short nothing I do can get the Mac to boot from the install DVD. I've tried the following:
1. Holding down 'c' at start up
2. Selecting the startup disk to be the DVD from Settings within Safe Mode
3. Holding down alt + option key then selecting the DVD
4. Holding down apple + option + shift + delete (read somewhere this forces the Mac to ignore it's desire to boot from the main partition and boot from next available device)
5. Tried resetting the NVRAM
6. Repaired disk permissions from within Safe Mode
All unnecessary periphals have been removed. I have yet to remove 3rd party RAM admittedly.
Really struggling for ideas now.
Is there any hope for me and my beloved Mac Pro?
Many thanks for your suggestions.

Right, another update. This coffee stuff really works!
Did a bit more digging around and found the following forum threads:
http://forums.macrumors.com/archive/index.php/t-1241149.html
http://osx86.wikidot.com/known-issues
Anyway, turns out the chap in the first forum link had the exact same problem as me. He temporarily got around this by removing the following files from the following location whilst in Safe Mode:
Location: /System/Library/Extensions
Files:
NVDANV40Hal.kext
NVDANV50Hal.kext
NVDAResman.kext
NVSMU.kext
GeForce.kext
GeForce7xxxGLDriver.bundle
GeForceGA.plugin
GeForceGLDriver.bundle
GeForceVADriver.bundle
I decided what the heck and moved these files into a new folder on my desktop and deleted the originals.
Sure enough my mac now boots up normally!
So it seems that the graphics card was the issue. I have read about the NVIDA 7300 GT only supporting 32-bit, but my tekkie understanding is not enough to know 32-bit what? I thought OSX was a 64-bit OS? If so, then why had it worked all this time? Only when I mistakenly installed Windons 7 64-bit did all my problems start.
Anyway, looks like I'll need to find a suitable replacement.

My MacBook Pro mid 2010 was upgraded to mountain lion os x and then my wifi started saying no hardware installed

My MacBook Pro mid 2010 was upgraded to mountain lion os x and then my wifi started saying no hardware installed

Hello Harrisonhcue,
I would be concerned too if I was getting the message "no hardware installed" when trying to use Wi-Fi on my MacBook Pro. For a message like this, I recommend resetting your System Management Controller (SMC) and NVRAM.
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
You can find the full article here:
About NVRAM and PRAM
http://support.apple.com/kb/ht1379
Thank you for using Apple Support Communities.
Best,
Sheila M.

MacBook Pro Mid-2010 Intermittent Shut-Down and Fuzzy Screen

Hi,
My MacBook Pro Mid-2010 has been having some problems recently. Hope someone will be able to help me with this. Below are the symptoms that has been showing.
Symptoms:
1. Intermittent Shutdown
2. Screen going fuzzy (when I give it a slight tap it will be fine but everything just hangs)
3. 3 beep sound
4. Can't start up (The sleep light will just stay on but nothing appears. I have to force shutdown and try starting it again.)
I have recently done a clean install of Yosemite but the problem is still occuring.
I also took it down to Singapore Apple Service Centre to try to get the problem fixed. But the initial tests shows that all the components in the Mac is working fine. I will need to pay for a full test as my Mac is out of warranty hence I did not send it in.
Below is a copy of the recent log after it shut down by itself.
Appreciate if someone can help me with this!
Thank you!
Regards,
Kai Yuan
Anonymous UUID:       730F95C2-DB71-659C-6654-559BD5396C64
Sun Nov 16 20:38:03 2014
*** Panic Report ***
panic(cpu 2 caller 0xffffff801c01e80a): Kernel trap at 0xffffff801c35a806, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0x00000001069a1000, CR3: 0x000000001e2fc001, CR4: 0x00000000000226e0
RAX: 0xd7f3000000000000, RBX: 0xffffff802c1370f0, RCX: 0x0000000025000000, RDX: 0x0000000000000000
RSP: 0xffffff80b28cbd00, RBP: 0xffffff80b28cbd20, RSI: 0x0000000000000002, RDI: 0xffffff802c122528
R8: 0x0000000000000001, R9: 0x0000000000000000, R10: 0x0000000000002000, R11: 0x0000000000000022
R12: 0xffffff802c1370f0, R13: 0x0000000000000000, R14: 0xffffff80b28cbe18, R15: 0xffffff802c122528
RFL: 0x0000000000010286, RIP: 0xffffff801c35a806, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00000001069a1000, Error code: 0x0000000000000000, Fault CPU: 0x2
mp = 0xffffff80278dbc00, phys = 0x1e649c00, prev (0x7: 0x1bd13000-0x1be00000)
vp = 0xffffff80278dbc00, phys = 0x11b8d40f0, prev (0xb: 0xffec4000-0xffee8000)
0xffffff80278da000: aAAAAGsAAABwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAABAICA gAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAACAgB4fCQcgAACACAAAACETGg2GkqKTgoIaPgACAgACKggAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAACAgEAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAG1hcCBhdXRvX2hvbQjXQCeA////AAACAP8PAAAAAAA h/////z8AAAAA0BwoQNutKWNUYjgAno0ngP///wCyjSfQsTie4NxlHID///8A360pgP///yDdrSmA/// /QN2tKYD///9QqI0nCABQBAAACAAABAAAAAIAAAEAAC0VAAAAYXV0b2ZzAAAvbmV0bWFwIC1ob3PAzAA A4A4O7pDu3g5lgAAgIASwOYAPIAAB/P83YNANAAAA
0xffffff80278db000: eAAAAIEAAACNAAAAAAAAAAAAAAAAAAAAAACAgB4fCQcgAACACAAAACETGgmGkqLTgoMZP0QBMwACKQQ AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AADAwAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAwMAfH4mHLQAGwAgAAAAhExoNidMiE4aPKn9oAuoAAhoAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAIjyRyeA////AAACAP8PAAAAAAAh/////z8AAAAAUa0 nIN2tKYD///+4V2E4AKiNJ4D///8AvI0nMAlmHCDcZRyA////oEWYJ9CylS9Qso0nABAQBAAQEADoMRw nZGV2Zi9kZXb/DwAAACLnt//////4LgoAAAAAIT8AAACA4pEnsESYJynJ1hsgU28cGkkAABjeZhxg22U c8IBFKBBxEyxgS5gnYLyNJwDQgAQAAV2AABAAAAAAEAAAdkIH///LBv8FywYBcHcABAAAAREAAABoZnM AzAAADA7uDuDu7m7jAAAAMMALDswMAHDgDg5u7u7uPu7+DgAGIAAIAgFsDjgDCAAT/wMODWACaBZsTjA HIAAIAgFgKj+bAz4AAgD4P4CDBwH+vQAA
0xffffff80278dc000: WQAAAF0AAABkAAAAAAAAAAAAAAAAAAAAACAgIAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAwgIAaHxoHLQAGQAoRAAAAABIDABAAAIAAFn0AAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAHh8JByAAAIAAAAAAAAAiAS9kZXYvZGlzazEAAAjInieA////AAAAAgABAAAAAEA AAwAAACHdCAAAAAAhMEyYJwMAAADA4pEnQMaNJwAQAAAAAAIA/w8AAAAAACH/////wIx3JwIAAAAAAAA A4ADmDk7uBM4AAAzsAIIQAArYeiP/Ax4AAvwPOFCCCRAgAAgCAQAOAAAA
Backtrace (CPU 2), Frame : Return Address
0xffffff80abe1de10 : 0xffffff801bf3a811
0xffffff80abe1de90 : 0xffffff801c01e80a
0xffffff80abe1e050 : 0xffffff801c03a443
0xffffff80abe1e070 : 0xffffff801c35a806
0xffffff80b28cbd20 : 0xffffff801c142c3b
0xffffff80b28cbdd0 : 0xffffff801c357da7
0xffffff80b28cbeb0 : 0xffffff801c15c86b
0xffffff80b28cbdd0 : 0xffffff801c146ef4
0xffffff80b28cbf40 : 0xffffff801c1510f7
0xffffff80b28cbf50 : 0xffffff801c44dcb2
0xffffff80b28cbfb0 : 0xffffff801c03ac46
BSD process name corresponding to current thread: launchd
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide:     0x000000001bc00000
Kernel text base: 0xffffff801be00000
__HIB text base: 0xffffff801bd00000
System model name: MacBookPro6,2 Mac-F22586C8)
System uptime in nanoseconds: 694617714744
last loaded kext at 41929989267: com.apple.driver.AudioAUUC 1.70 (addr 0xffffff7f9e43c000, size 32768)
last unloaded kext at 112897414739: com.apple.driver.AppleUSBUHCI 656.4.1 (addr 0xffffff7f9d344000, size 65536)
loaded kexts:
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AGPM 100.14.37
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 266.5
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleIntelHDGraphics 10.0.0
com.apple.GeForceTesla 10.0.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.7.21
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleIntelHDGraphicsFB 10.0.0
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleUSBCardReader 3.5.0
com.apple.driver.AppleIRController 327.5
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.iokit.SCSITaskUserClient 3.7.0
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.iokit.AppleBCM5701Ethernet 10.1.2b3
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0
com.apple.nvidia.classic.NVDAResmanTesla 10.0.0
com.apple.driver.AppleBacklightExpert 1.1.0 >AppleGraphicsControl 3.7.21
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOSurface 97
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.0
com.apple.iokit.IOUSBMassStorageClass 3.7.0
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.CoreStorage 471
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.0
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.iokit.IO80211Family 700.52
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.Libm 1
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x80AD, 0x484D54313235533642465238432D47372020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Internal Memory Card Reader
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Hub
USB Device: IR Receiver
USB Device: Built-in iSight
Thunderbolt Bus:

I just had the same problem! Just installed Mavericks a couple of days ago but everything was running perfectly till just a couple of minutes ago watching netflix and working on Dreamweaver my macbook just shutdown. I had to Turn it back on and in the first try it shutdown immediatelly again, then i tried for second time and as soon as i got back into my account a bunch of programs start sending erros as my clock was set to a different date. My battery seems to be fine, i even check the report in the system preferences, it had 50% of battery and was plugged in so i am guessing that is not the problem.
Here the report:
Charge Information:
Charge Remaining (mAh):          3356
Fully Charged:          No
Charging:          Yes
Full Charge Capacity (mAh):          6626
Health Information:
Cycle Count:          367
Condition:          Normal
I had to have my motherboard replaced last year as my macbook its a 15 inch Mid 2010 so i took it to Mac Store.. they didnt charge me for anything as it is a problem that Apple acknowledge the problem was in their side. I am just hoping i dont have to deal with this again.

Just upgrade my MacBook Pro Mid 2010 to Mountain Lion and tried to connect with Apple TV 3th gen. through Airplay and couldn't mirrorring video on my LG Smart TV screen. Just paid US 99.00 for Apple TV plus US 19.99 to Mountain Lion for nothing @?$%

Just upgrade my MacBook Pro Mid 2010 to Mountain Lion and tried to connect with Apple TV 3th gen. through Airplay and couldn't mirrorring video on my LG Smart TV screen.
Just paid US 99.00 for Apple TV plus US 19.99 to Mountain Lion for nothing @?$%& !!!!
Back again to mini display to hdmi cable.
could you help me????

It is stated that mirroring requires recent hardware (2011 or later)
http://support.apple.com/kb/ht5404
However you can still use 3rd party solutions like Airparrot which do it via software

I was using my MacBook Pro Mid-2010 and then the screen went blank, I did a hard restart and went to restart again and it won't startup. The white light comes on and then the computer kinda "clicks" off!

I was using my MacBook Pro Mid-2010 and then the screen went blank, I did a hard restart and went to restart again and it won't startup. The white light comes on and then the computer kinda "clicks" off!

Execute the procedures in this support article:
http://support.apple.com/kb/TS1367?viewlocale=en_US
Ciao.

TS2570 MacBook Pro 15" Mavericks, bran new froze up...gray screen on start up? I do not have a cd drive.

MacBook Pro 15" Mavericks, bran new froze up...gray screen on start up? I do not have a cd drive. Doesn't work in safe mode either. I've had it two days!

You really should take it back to the Apple store. There is a 15 day, no questions asked money back warranty, if you want to return it. Or you can get a free diagnosis and repair.
But make an appointment: http://www.apple.com/retail/geniusbar/

MacBook Pro Mid-2010 kernel panic at each restart

Hi,
As most of you, I succumbed to temptation to update my MacBook Pro (mid-2010) with OSX Lion. First, I've done a traditional upgrade from Snow Leopard (10.6.8) from the Mac App Store. Due to some problems (see list bellow), I've decided to make a clean install (by extracting the file InstallESD.dmg from the Lion downloaded package. I've burned the package on on 16GB USB key (8GB is sufficient). Well.. On both type of installation I've encoutered the same problems.
The 99% of the time, my MBP make a kernel panic at the start (both when I do a simple restart of the system or after restating the system after a normal shutdown.
As I use mainly my MBP for professional use, I set the system to ask for a user logon at system start. Mainly each time, it wasn't possible to logon to the system. As soon as I tried to enter my password, I only see the game wheel icon turning on the screen and no possibility to enter my password. In this state, my only solution was to restart my system by pressing the power button.
Both of these two problem was replicable in either an upgraded system or on a clean install.
Finally (because I'm a patient guy :-) ), I've do a third clean installation, restored my system from one TimeMachine backup and found a solution to avoid having the problem I explain into the point 2.
When you restore a backup from TimeMachine from within Mac OSx, you have to create a second admin account, log onto this account and run the Migration Assistant to restore your backup. Admitting that, like me, during the clean OS installation, you've used the same account name as the one you had into your backuped installation, at the time of the TimeMachine restore, Migration Assistant will propose you two things:
Create a new user and restore our TimeMachine backup on this new username
Replace the existing username on your clean installed machine my the one that was backup into timemachine
As I've previously created a new account with admin right, I've logged on this account, launch Migration Assistant, confirm that I'm okay to restore my TimeMachine backup on the already existing user.
Finally, this setup resolved my point 2 problem. The difference between my initial setup and the one I use now is that I've now two users presented on my logging screen. To log on now, I've to choose the user, enter the password and never had the problem I had before with only one user set on my system.
Now, I really hope that Apple will fix this first version of Lion asap. For the rest, I'm pretty happy with the system. I'll work this week with Lion and will see if I encounter other problems. One thing is sure, I'll keep my TimeMachine backup of my previous Snow Leopard system at a safe place until I'll be sure that Lion will be stable.
Cheers....

Hi,
That's correct, I'm running with one RAM chip, after testing the bays work correctly first, I elliminated that route, so it was indeed a bad RAM chip module.
I was just about to give up, as the first swap was with the good RAM out, so same problem. I thought I had nothing to lose by swapping the RAM again, and voila, it worked. I'm opening up some seriously big photoshop files at present, just to make doubly sure it's been resolved ha ha.
I'm looking at replacing my RAM now with OWC, as apparently according to their website and with the correct EFI updates, you can max out the mid 2010 MBP with 16GB of RAM. I'll much rather treat myself to that, than forking out on a new logic board.
I think it's quite a simple, but effective fix this one.
Thanks for all the advice and help, I really did appreciate it.
Ciao,
Adrian

MacBook Pro mid 2010, gray screen at start up, boot from dvd not working.

Similar Messages

Maybe you are looking for