Macbook Pro no longer support Apple Cinema Display after graphic update 1.0

I recently updated my system to ver. 10.5.2 and after that I updated to graphic system 1.0. After that my macbook pro began to have several problems dealing with my 23" Apple Cinema Display.
1- if started in 'closed lid' mode it gives me a kernel panic (shaded screen) error during start up
2- if started in 'open lid' mode it boots fine but whether i decide to close the lid it fails to wake from sleep mode. It starts for one or two seconds and then it gets back to sleep.
So, I made a long time taking test during the weekend and after several "archive and install" I found that this issue is related to the leopard graphic system update 1.0. Somehow this update mess up the way that macbook pro deals with my Apple Cinema Display.
I hope that someone at Apple will address this issue toward a solution in a short time.
I appreciate any other experience in this sense by anybody.
Thank you for any reply.

DGarrett wrote:
Virgin,
Check out the 'Apple Displays' forum and you'll find that you are not alone. MBP/Cinema Display relationship broken since graphics updater. Hopefully an Apple patch soon, or it's time for an Archive and Install w/o updating the graphics.
Best,
DG
Here is the direct link to the Cinema Display forum:
http://discussions.apple.com/forum.jspa?forumID=981

Similar Messages

  • I am trying to hook up my 13" MacBook Pro to a 23" HD cinema display.  How do I do this?

    I am trying to hook up my 13" MacBook Pro to a 23" HD cinema display.  How do I do this?

    Your notebook computer must be awake to do what you want to do.
    Get yourself a longer cable, or buy an Apple-TV box and do it wirelessly.
    http://store.apple.com/us/ipod/ipod-accessories/apple-tv

  • How do I connect my macbook pro 5,5 to 24" cinema display

    how can I connect my macbook pro 5,5 to apple 24" cinema display

    Hello jkinhays,
    I recommend reviewing the steps on page 8 of the Apple LED Cinema Display manual to assist on setting up your MacBook Pro with the Cinema Display:
    Apple LED Cinema Display manual
    http://manuals.info.apple.com/zh_CN/Apple_LED_Cinema_Display_CN.pdf
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Mac Pro no longer supporting my 2 displays?

    I have a 4 year old Mac Pro with the Dual-Core Intel Xeon Processors and 6GB of ram. I seems to have 4 NVIDIA GeForce GT display cards as well. I have been using this system with two 22" Apple cinema displays for 4 years with no problem what-so-ever. the last two times I've rebooted the system, one of my displays doesn't come up - it stays black. The first time I tried changing cables and connections and nothing seemed to work (the one monitor that had been black, stayed black no matter what configuration I tried). I then put all the cables back where they had been originally and it then came back on. I rebooted a few days later and the same thing happened - black screen. No matter what I try it won't start up. Occasionally the little light on the front will come on after I've shut the computer down but then it goes out when I boot up. Can anyone guide me as to what might be the cause. Could the color card(s) be going bad or is it more likely the display itself?

    Contact the vendor.

  • MacBook Pro Late 2011 Model - Does not work after Yosemite update

    i recently updated my OS to Yosemite and had in problems for two days but yesterday it ceased to work in the middle of printing a document.
    I need my laptop back up and running since I have school exams soon and vital information and files are in this laptop.
    i Have never had a problem with the laptop before.
    Issues that I have had
    logging in takes at least 20 minutes
    cannot progress further than that, desktop is blank and nothing loads, only the dock.
    battery drains extremely fast
    Safe boot does not even load
    I've tried clearing that VRAM and the other one.
    Cannot access anything at all
    This is appalling and at the worst possible time.

    Please describe exactly what you're doing and what happens.

  • MacBook Pro Apple Cinema Display issues

    I’m using Photoshop CS6 through a MacBook Pro connected to an Apple Cinema Display. Files on display don’t always appear (work area is just blank, interface still there) and when I go to save, the save dialog box is off top of screen to where I can’t see but a small portion of the dialog box. Can’t pull it onto screen. Anyone else experiencing this?

    I have a similar situation.  I have spring 2011 macbook pro 17" (MacBookPro8,3).  I was connecting to an older 30" Cinema Display HD, using the Apple dual-link cable with Mini DVI (Thunderbolt) and USB.  I am running 10.6.8.
    I was running this configuration for a while (closed lid/"clamshell"), but it stopped working.
    I'm pretty sure this is from the "Security Update" that I just installed.
    No amount of reboots or cable jiggering helped.
    Except this wierd thing:  if I connect the USB and display to the laptop, the display stays dark.  If i disconnect the USB cable connecting the DISPLAY to the CONVERTER, the screen comes up fine.
    I just plug the keyboard into the laptop and it works.  Of course, unplugging the CONVERTER USB from the LAPTOP makes it go away (?!).  So I've lost a USB prot with this little hack.
    Try messing the USB connections and see if you get any changes.
    I have no idea what to make of this bizarre behaviour, but it is making me crazy not being able to reliably use my desk setup with this nice laptop.
    I hope someone can offer more data or help.

  • I have a Macbook Pro Early 2011 from the USA.  After installing Mavericks, Adobe CS6 crashes whenever it is plugged into a 27inch cinema display I purchased from the apple store in China (We moved to China). It works when not plugged into 27inch display.

    I have a Macbook Pro Early 2011 from the USA. It is now running Mavericks.  I connect it to a 27" Cinema Display that I bought in China after we moved to China.  Before I installed Mavericks, I could run all of the Adobe CS6 and Adobe CS5.5 applications on my Macbook Pro while connected to the cinema display. Now that I have Mavericks installed, whenever I am connected to my 27" CInema display my Adobe applications crash upon opening.  I know this is a rare scenario, but does anyone have any ideas how to fix this problem? Is there a new driver that needs installed?  I'd appreciate any help.

    I am also having a similar issue. I used Adobe Lightroom and my whole display goes black. Even my laptop screen and the lights on the keyboard go black. I can still hear the fan running, so I assume it is just the display. This is my first Mac and I have had nothing but issues. I think I am going back to Windows after this.

  • How do i connect my Fujitsu Tablet + mac Pro to Apple Cinema Display 23'?

    Dear Mac users
    thanks in advance for your help.
    I currently own:
    • Fujitsu T 4220 (tablet) – Mobile Intel 965 Express – 60 Hertz – goes up to 1680*1050 (guess SXGA) – (it has the following other supported resolutions: 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600)
    • Mac Pro
    • Apple Cinema Display 23’
    What I would like to do is, please refer to the jpeg posted on http://www.flickr.com/photos/34831802@N06/3234336204/, connect – at the same time – my tablet pc and my Mac Pro to the 23' Apple Cinema Display and switch (when I need) from tablet to MacPro using the same 23’ ACD. Top would be to be able to switch for one to the other while they’re both switched on. Usually on 2 pc’s with vga I’d use a switch A → B (in the jpeg it would be I → E) with a selector.
    Have been reading different posts such as: http://discussions.apple.com/thread.jspa?messageID=8000641&#8000641 or http://discussions.apple.com/thread.jspa?messageID=6530475&#6530475 or
    http://discussions.apple.com/thread.jspa?messageID=7417258&#7417258
    + others on the net and have (hopefully) understood that:
    a) from Vga to Dvi I need a converter such as Geffen’s or similar
    b) the problem with ACD 23’ is that it has only 3 resolutions: 1024*640, 1280*800 or 1920*1200
    In the attached image I guessed a connection in order to connect – at the same time – both the machines to the 23’ ACD:
    1) my fujitsu tablet (i in the image) has to be connected, with a Vga cable (h), to the Vga → Dvi converter (g).
    2) from the Vga → Dvi converter (g) I need to connecto to the Dvi switch (c)
    3) easier is connecting the Mac Pro (e), since I only need a Dvi cable (d) to connecto to the Dvi switch (c)
    4) the Dvi switch (c) will then be connected to the 23’ ACD with a Dvi cable
    Now, my questions are:
    a) is the solution described above (Vga cable (h) to the Vga → Dvi converter (g)) a good solution or should I use, instead, a docking statione that comes with a Fujitsu Port Replicator (FPCPR65) which has a 1 x DVI-D port?
    b) Given the 3 resolution accepted by the 23’ ACD (1024*640, 1280*800 or 1920*1200), I do not understand if I can use my tablet through a Vga to Dvi Converter and at which resolution (my tablet has the following other supported resolutions: 1680*1050, 1400*1050, 1280*1024, 1280*768, 1280*720, 1024*768, and 800*600).
    c) Is there a way, also using an external video card or converter, to bring my resolution from 1680*1050 to 1920*1200? (the 16:10 ratio is in fact the same = WXGA (1280x800), WXGA+ (1440x900), WSXGA+ (1680x1050), WUXGA (1920x1200)
    d) Talking about Vga → Dvi converter (g), am aware of the gefen product. Can you please list some others that might be good as well?
    e) And how about the DVI switch? Any will work? Any particular suggestion?
    Thank you very much for your help.
    If you have any other suggestion, please let me know.
    Regards,
    Emil

    Noone to help me?
    No ideas?
    Thanks,
    Emil

  • My macbook pro no longer detects my camera.

    My macbook pro no longer detects my camera.
    After downloading thousands of photos, my mac no longer sees my camera.  Nothing has changed.  I have tried restarting the mac, using fresh batteries, different usb ports. When I try to download photos, iphoto opens up on it’s own, but my camera does not show up.  Neither does it show up in any finder window, or under disk utilities.
    mac os x 10.6.2
    Nikon D90
    Any help would be greatly appreciated. 

    Try Reset SMC.   http://support.apple.com/kb/HT3964

  • 23" Apple Cinema Display and accurate color?

    I use a dual 2.3GHz Power Mac G5 along with a 23" Apple Cinema Display fro graphic design work. I used to use a Pantone Color calibration device when I was using third-party monitors with my Macs. Now that I have the Cinema Display, I haven't bothered to calibrate this wonderful monitor. I had heard that using Apple's displays with their own computers would display the most accurate color possible without calibration. I haven't changed the color settings in my Adobe products, and I'm not seeing any significant issues with my color outputs. Any advice on this subject is appreciated.

    If the display uses the Apple Display Connector (ADC)
    <http://upload.wikimedia.org/wikipedia/commons/thumb/0/09/AppleDisplayConnector.j pg/800px-AppleDisplayConnector.jpg>
    you will need a DVI to ADC adapter.
    <http://www.welovemacs.com/mb571zla.html>
    They are also available on eBay.
    <http://www.ebay.com/itm/Apple-DVI-to-ADC-adapter-A1006-for-Apple-LCD-monitors-Mi nt-Condition-/251073546040?pt=US_Video_Cables_Adapters&hash=item3a75264738#ht_5 0 0wt_1089>

  • How can I run a 27" Apple Cinema Display and another monitor from my MacBook Pro?

    Hi everyone,
    I recently purchased a brand new 15"  MacBook Pro to replace my old one. I was told when ordering it that I would be able to hook up two external monitors to it using the Matrox DualHead2Go hardware. So, I also bought a 27" Cinema Display (non-Thunderbolt since it wouldn't work with the DH2Go). However, when I contacted Matrox they said their products don't support screens as large as the 27" ACD.
    Bummer!
    So, my question is: does anyone know how I can hookup a 27" Apple Cinema Display at 2560x1440 and a Acer 22" monitor at 1685x1050 (or, anything less really) to my new MacBook Pro?
    I've looked around and haven't been able to find a good answer.
    Thanks for your help!

    Will something like this work? A USB to VGA adapter? Can I use this at the same time that I have a Cinema Display plugged into the Mini-DVI port and will they both work at the same time? Anyone know?
    http://www.amazon.com/StarTech-Monitor-External-Adapter-USB2VGAE2/dp/B002FJQXXC/ ref=sr_1_2?s=electronics&ie=UTF8&qid=1329870330&sr=1-2

  • HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

    i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

    <http://support.apple.com/kb/HT5891>
    You can use USB for the Apple trackpad.
    <http://www.mobeetechnology.com/the-power-bar.html>

  • What do I need to connect my apple cinema display to new macbook pro

    what do I need to connect my apple cinema display to new macbook pro?

    2011 macbook pro with TB ->  apple 27" Cinima Display with mini-displayport 
    Does this work natively?  Is there an adapter or workaround? 
    No, not until or if an adaptor becomes available.  See this thread.
    Apple display and Thunderbolt compatibility

  • Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278.  I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!

    Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278.  I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
    im not sure what to do next - can anyone help?
    im running OSX 10.7.4

    Hi There,
    I have had the exact same issue but with a projector.
    The issue lies with Mountian Lion 10.8.2.
    I tried many a combination with no luck to get HDMI working.
    Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
    Bought my macbook home and voila, now displaying through my projector.
    There is a small graphics update after 10.8.1 which seems to be the cause.
    Hope this helps.
    Thanks.

  • How do i connect apple cinema display a1082 to my new macbook pro

    I have a macbook pro intel core duo2 and i'm trying to connect my apple cinema display a1092 to my computer, there is an adapter available, but it does not seem to address the fireware cable coming out of my cinema display

    the apple display that i see online has a mag safe, usb and mini display port...connect all three to your laptop so you can charge your laptop as you use the display as well as use the USB ports on the back of the monitor.. i didnt see anything about firewire...

Maybe you are looking for

  • Mp3 attachment to SD card

    I'm missing something fairly obvious here.  I've received an mp3 file as an attachment.  It's 1mb, and when I try to open it I get a message stating "Attachment size exceeds server value."  My thought is to transfer it to my SD card, but I'm not havi

  • Can an iPod download all files?

    I'm considering buying an iPod touch. I need it to have a full functioning browser that can surf the web and download all file types and temporarily store them on the iPod's storage and then by virtue of connecting it to a computer off-load said file

  • Add a desktop

    How could I add a new desktop with Yosemite?

  • Run tme Error 9: Subscript out of range

    Hi Folks, When ever i am trying to execute the report from favourites folder in BW 3.5 version it's giving the runtime error 9: Subscript out of range error.when i click on debug option it enters into Visual basic code. Please  help to me how to over

  • E-mail not working since beginning of December

    my e-mail has suddently stopped working and have tried to enter set up but it does not recognise my user name or password - i have tried everything suggested but nothing works pls help