MacBook Pro not recognising EAC burnt audio cds

Hi, I have been searching all day over forums and google trying to solve this problem but had no luck.
Using the EAC burning guide from the Wiki articles I burnt several audio CDs on my windows vista laptop. Everything seemed to go fine in the burning process. All the CDs work fine with all my cd players as well as my slightly old iMac and other Windows computers. However, when I insert the CDs into my MacBook Pro they are recognised as blank CDs. The strange thing is, is that my MacBook Pro will recognise consumer CDs from the shops without any hassle.
I've tried two different disks (maxwell cd-r and a blank non-branded cd-r) so I think we can eliminate any media problems.
It could be a problem with the burning process but then why would it work on all of those other platforms including another Mac?
I have tried re-installing older versions of iTunes, same result. My MacBook Pro is currently up-to-date too. Also to add that I have made audio CDs on this MacBook Pro using both Toast and WaveBurner that play fine.
Does anyone have any ideas, I think it is likely to be a problem with my MacBook Pro settings but would not know where to start?
My MacBook Pro Specifications:
  Model Name:     MacBook Pro
  Model Identifier:     MacBookPro5,3
  Processor Name:     Intel Core 2 Duo
  Processor Speed:     3.06 GHz
  Number Of Processors:     1
  Total Number Of Cores:     2
  L2 Cache:     6 MB
  Memory:     4 GB
  Bus Speed:     1.07 GHz
  Boot ROM Version:     MBP53.00AC.B03
  SMC Version (system):     1.48f2
Drive Specifications:
  MATSHITA DVD-R   UJ-868:
  Firmware Revision:     KB19
  Interconnect:     ATAPI
  Burn Support:     Yes (Apple Shipping Drive)
  Cache:     2048 KB
  Reads DVD:     Yes
  CD-Write:     -R, -RW
  DVD-Write:     -R, -R DL, -RW, +R, +R DL, +RW
  Write Strategies:     CD-TAO, CD-SAO, DVD-DAO
  Media:
  Type:     CD-R
  Blank:     Yes
  Erasable:     No
  Overwritable:     Yes
  Appendable:     Yes
  Write Speeds:     8x, 24x
iTunes 10.4

The brands that have worked well with all my Macs are:   
//   ( – Sadly, they all have Matsushita drives – )
> Memorex Black Label (the color dye is black)
> Kodak Gold
> FujiFilm ( "made in Japan" , the ones made in Taiwan don't seem to have the same build)
> TDK Armor Plated
> Verbatim DataLifePlus
80% of the time I get the TDK brand... I haven't had any problems with Phillips and Sony either...

Similar Messages

  • Macbook Pro not recognising lens correction

    Its probably an easy fix, but my old iMac 2008 version works fine, recognising all of my lenses (Nikon) in the Develop Module simply by checking the 'enable lens profile' box. However, the Macbook Pro Retina 17 simply gives me a choice of 8 Nikon lenses, none of which match any of the ones that I'm using. I have to choose the one that matches the one I'm using the closest. The camera is a D800. Please help, as it's driving me round the bend. I'm sure that it's me being a drongo, but I know that I'm not the only one having the same problem on newer Mac's - a friends Pro is the same, and he also has problems with his new iMac as well. How come my old machine recognises everything perfectly, when all of my setting are identical? I am using Lightroom 4.4, by the way.
    Thanks for listening.

    Howdy Indanthrone,
    Welcome to Apple Support Communities. 
    The article linked below provides troubleshooting suggestions that’ll resolve most printer setup issues, like the one you’re seeing with your MacBook Pro and Cannon MP280.
    OS X: Printer and scanner software available for download - Apple Support
    Take care,
    -Jason

  • Window 7 on macbook pro not recognising external hard drive

    Hello
    I have windows 7 installed on my macbook pro.My new external hard drive,western digital black caviah 2.5' 1tb with cradle is not recognised.I want to use it to back up my windows side of my macbook pro.Does anybody have any ideas?
    Thanks
    John

    canofsoup,
    in Windows 7
    press start, find computer > right click on computer and then  in the drop down menu select manage
    in the Computer Management window:
    Select> Disk Management by click on it in the left menu
    Right click on your External Drive > select mark partition as active
    Format and enjoy
    Cheers,
    Sidonsoft

  • Macbook Pro not recognising wireless MM

    Morning all -
    Whenever I turn my Macbook Pro on, it doesn't recognise my wireless MM. I have to use the trackpad, and then either flick the switch on the bottom of the MM, or re-pair it with the Mac for it to work
    Any ideas?
    thanks
    MacBook Pro   Mac OS X (10.4.9)  

    Gareth Clark-
    Have you seen this FAQ?
    Luck-
    -DaddyPaycheck

  • MacBook Pro not recognising printer and printer list empty

    my MacBook Pro isn't recognising my printer. This happened before Yosemite update. I looked in the printer list and my printer was the only one there. On advice I deleted it and tried to re add it. There are no printers in the list to click on. I have a canon MP280. I upgraded to Yosemite and still no luck.
    i Also wanted to ask if my printer can be attached to a BT home hub.
    Thanks in advance

    Howdy Indanthrone,
    Welcome to Apple Support Communities. 
    The article linked below provides troubleshooting suggestions that’ll resolve most printer setup issues, like the one you’re seeing with your MacBook Pro and Cannon MP280.
    OS X: Printer and scanner software available for download - Apple Support
    Take care,
    -Jason

  • HELP! MacBook Pro cant recognise or burn DVDs but only CDs, and...

    Hi all
    I noticed that there many of you have the same problem, but I really need some advice here, my MacBook Pro cant recognise or burn DVDs but only CDs, well actually occasionally it does recognise the DVDs then it burn but cannot write (on Toast), also in many other apps, like iDVD or DVDSP, it does run well on the first part of the burning but then failed at the end, with all kinda diff error msg. I have tried using many diff brands of disc too, inc verbatim.
    So I borrowed my friends external DVD writer (actually a cheapy one with no brand), when I tried to burn using the external then an error msg comes up and says the writer cannot recognise the disc.
    I dont wana get the MBP to repair but just wana get a external DVD writer to solve the problem, cos i need to use my computer and dont have a replacement mac, but now I am worry if the problem i now having is a system problem or just hardware, not sure if it is because the DVD writer i borrow is cheapy so it doesnt cope with mac, or just my MBP have system error that cant burn DVDs...
    But my MBP can burn CDs so it is not a hardware problem? and if that is a system problem so even I buy a new DVD writer wont solve the problem?
    btw, I have tried many solving methods like rewriting permission, reset PVRAM, etc
    PLSSSSSSSSSSSSSSSSSSSSSSSSS HELP

    I'm having the same problem you are on my 2.4GHZ Core2Duo MBP running 10.5.2. It will sometimes recognize DVDs, sometimes not... it chuggs and clunks and then spits the disc out. If i re-insert it a view times it will show up on the desktop. I get failures from Toast as well as iDVD. If i keep trying i have been able to burn files onto a disc with the finder, but then the burner fails during the verification. If put the disc back in the contents appear to be correct (after a quick look). Burning CD-Rs seems to be working fine, that with the occasional DVD write seems to point away from the HW. I am trying with both Memorex DVD+RW and Verbatim DVD-Rs...
    I have tried the command/option-PR reset combo with no luck.
    Any ideas?
    thanks,
    -graham
    PS the specific error i got from iDVD was: The error #-2147352539 was reported…
    Message was edited by: Graham - Sonos

  • Hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

    hi, how do i stop my macbook pro not to automatically connect to a wifi connection that is not my preferred network? i want to automatically connect my macbook to my preferred network everytime i turn on my laptop. thank you.

    System Preferences > Network > WiFi
    To give a network the highest priority, drag the name of the network to the top of the list. This is the network your computer will attempt to join first.
    http://support.apple.com/kb/PH13797

  • I can't turn off my macbook pro not even force quit.it keeps restarting soon after i let go of button

    I can't turn off my macbook pro,not even when I try to force quit.Mid 2009 17 inch all the software up to date.Problem started 3 days ago and mac is slow to load when restarted.Please help

    Hi there nina777s,
    You may want to try resetting the PRAM and SMC on your Mac as an initial troubleshooting step. Take a look at the articles below for more information.
    About NVRAM and PRAM
    http://support.apple.com/kb/ht1379
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    -Griff W,

  • Why will macbook pro not go to sleep with Lion OS?

    Why will macbook pro not go to sleep with Lion OS?

    Test after each of the following steps that you haven’t already tried:
    Step 1
     ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
    Step 2
     ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
    Step 3
     ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
    Check all printers for unfinished jobs. Deal with any you find.
    Step 4
    Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
    Step 5
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
    Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
    Step 6
    Boot in safe mode and log in. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
    If sleep now works as expected, go on to the next step.
    Step 7
    Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
    Step 8
    If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
    If you still have the sleep issue after booting out of safe mode, post again.

  • Why does the internet on my new macbook pro not work when my old macbook's does?

    Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

    Here is your fix .. I have uploaded my properly calibrated profile get it here :
    http://www.megaupload.com/?d=YAJL6A9X
    And it should go to your user folder/Library/ColorSync/Profiles
    if you have one already you can rename either one ..
    and then go to system preferences - displays - color to select the profile .
    you will get rid of the blue tint while keeping correct color and gamma
    This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

  • Macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

    macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

    If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
    You will have to have all computers authorised with the relevant Apple ID's
    Store  >  Authorise this computer...
    This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
    If both Computers use the same apple id this step is not required.

  • Macbook pro not working without battery

    my macbook pro not working if i remove the battery
    & if the battery is empty my macbook pro not working before charging

    Try an SMC reset:
    http://support.apple.com/kb/HT1411
    You should not run on AC with the battery removed. The MBP should work that way, but the OS throttles back the CPU so running like that is not recommended.

  • I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

    I have a newer MacBook Pro and I am trying to download my Final Cut Pro 7 Studio 2 on it. Is that possible or does the new MacBook Pro not support anything other than Final Cut Pro X?

    As Tom said the FCS forum is the better place to post the question.
    Here is Apple's best practices doc for installing both on the same system.
    BTW, FCP7 is part of the FCS 3 suite of apps.
    Russ

  • Macbook pro Notes won't sync with ipad 2

    I create notes in MacBook Pro Mail Notes program.
    I create notes in iPAD 2 Notes program.
    I plug iPAD into MacBook ,,, it automatically Syncs.
    I go into iTunes ensure, "Other ,,, Sync notes", is checked.
    I also ensure, "Advanced ,,, Notes", is checked.
    I click Sync, all looks fine ,,, but NO Notes sync "transfer" between computers !!!
    I did sync "transfer" an APP, iPages, from MacBook Pro to iPAD 2, ok.
    I thought I could sync "transfer" Notes between MacBook Pro and iPAD 2.
    Am I trying the impossible?
    What am I missing?

    I read in your More Like This
    Here's how to sync your Notes between iPad and Mac
    But ,,, When I Go to System Preferences on your Mac > MobileMe > Sync > and make sure Notes is checked
    "Notes" ,,, is NOT checked ,,, and I CANNOT check it.
    Is this why I cannot SYNC my MacBook Pro "Notes" with my ipad 2???
    How do I fix it???

  • My macbook pro not syncing with my ipod and ipad. What do I do?

    My macbook pro not syncing with my ipod and ipad. What do I do?

    iOS: Device not recognized in iTunes for Mac OS X

Maybe you are looking for

  • The TV show I just bought does not register in the cloud and thus I can't watch it . . .

    Here's what's happening: I buy this new show called "Bodertown: Laredo." After the purchase is complete and the 'Play it now' window pops up I choose to shop for more shows instead. When I get back to the show to watch it I find it not listed in my p

  • Problem with Smartform printing

    Hi all, I developed Dunning form . its working fine in development system. We have problem in production . For example , we need to print dunning form for 10 customers means 10 forms need to be print at a time usinf F150. Some forms printing fine wit

  • Java.exe-Application Error

    Hi, There is a runtime error java.exe - application error - the instruction at "0x5006f60a" referenced memory at "0x08f20528". The memory could not be "written" The application was performing well, but now there is an runtime error which gives the ab

  • Snow Leopard Freezes

    I have: Mac OS X version 10.5.8 Processor 2.1 GHz Intel Core 2 Duo Memory 1 GB 667 MHz DDR2 SDRAM I am trying to install Snow Leopard from a disk I received from Apple.  It gets to about 15 percent installed and then goes to the blue Apple screen wit

  • Dinamic Text field as htmlText

    Hi, I got a dinamic text field using htmltext = <some xml feed> but on this feed i got £ ’ and others any idea how can i get it to render properly? Thanks rS