Macbook pro slow boot after ssd upgrade
Hy everyone i need some help!
I have late 2011 macbook pro 15 2.2 i7 8gb ram samsung 840evo 120 ssd and wd 500gb normall hard drive
My problem is the boot time because is 45sec after the clean install i reinstall several times but not change!
I already reset the nv ram / pr ram and the startup disk is the ssd!
17/01/14 19:16:29,240 root[124]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
17/01/14 19:16:29,602 root[127]: Unable to resolve hostname(s)
17/01/14 19:16:29,616 ntpd[52]: proto: precision = 1.000 usec
17/01/14 19:16:33,000 kernel[0]: en2: promiscuous mode enable succeeded
17/01/14 19:16:33,910 WindowServer[98]: Session 256 retained (2 references)
17/01/14 19:16:33,910 WindowServer[98]: Session 256 released (1 references)
17/01/14 19:16:33,927 WindowServer[98]: Session 256 retained (2 references)
17/01/14 19:16:33,928 WindowServer[98]: init_page_flip: page flip mode is on
17/01/14 19:16:34,000 kernel[0]: MacAuthEvent en1 Auth result for: bc:ee:7b:63:b9:20 MAC AUTH succeeded
17/01/14 19:16:34,000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
17/01/14 19:16:34,000 kernel[0]: AirPort: Link Up on en1
17/01/14 19:16:34,000 kernel[0]: en1: BSSID changed to bc:ee:7b:63:b9:20
17/01/14 19:16:34,000 kernel[0]: AirPort: RSN handshake complete on en1
17/01/14 19:16:34,000 kernel[0]: flow_divert_kctl_disconnect (0): disconnecting group 1
17/01/14 19:16:35,108 WindowServer[98]: Found 1 modes for display 0x00000000 [1, 0]
17/01/14 19:16:35,147 WindowServer[98]: Found 42 modes for display 0x00000000 [30, 12]
17/01/14 19:16:35,149 WindowServer[98]: Found 1 modes for display 0x00000000 [1, 0]
17/01/14 19:16:35,150 WindowServer[98]: Found 1 modes for display 0x00000000 [1, 0]
17/01/14 19:16:35,164 WindowServer[98]: mux_initialize: Mode is dynamic
17/01/14 19:16:35,168 WindowServer[98]: Found 42 modes for display 0x00000000 [30, 12]
17/01/14 19:16:35,172 WindowServer[98]: Found 1 modes for display 0x00000000 [1, 0]
17/01/14 19:16:35,173 WindowServer[98]: Found 1 modes for display 0x00000000 [1, 0]
17/01/14 19:16:35,197 WindowServer[98]: WSMachineUsesNewStyleMirroring: false
17/01/14 19:16:35,198 WindowServer[98]: Display 0x04272900: GL mask 0x11; bounds (0, 0)[1440 x 900], 42 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca4, S/N 0, Unit 0, Rotation 0
UUID 0x8a96a568c33550779a382c64e81094d2
17/01/14 19:16:35,199 WindowServer[98]: Display 0x003f0041: GL mask 0x20; bounds (0, 0)[1920 x 1200], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 5, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
17/01/14 19:16:35,199 WindowServer[98]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
17/01/14 19:16:35,199 WindowServer[98]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
17/01/14 19:16:35,200 WindowServer[98]: WSSetWindowTransform: Singular matrix
17/01/14 19:16:35,201 WindowServer[98]: WSSetWindowTransform: Singular matrix
17/01/14 19:16:35,206 WindowServer[98]: Display 0x04272900: GL mask 0x11; bounds (0, 0)[1440 x 900], 42 modes available
Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model 9ca4, S/N 0, Unit 0, Rotation 0
UUID 0x8a96a568c33550779a382c64e81094d2
17/01/14 19:16:35,206 WindowServer[98]: Display 0x003f0041: GL mask 0x20; bounds (2464, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 5, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
17/01/14 19:16:35,206 WindowServer[98]: Display 0x003f003e: GL mask 0x4; bounds (2465, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
17/01/14 19:16:35,206 WindowServer[98]: Display 0x003f003d: GL mask 0x2; bounds (2466, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
17/01/14 19:16:35,207 WindowServer[98]: CGXPerformInitialDisplayConfiguration
17/01/14 19:16:35,207 WindowServer[98]: Display 0x04272900: Unit 0; Alias(0, 0x11); Vendor 0x610 Model 0x9ca4 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 1
17/01/14 19:16:35,207 WindowServer[98]: Display 0x003f0041: Unit 5; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
17/01/14 19:16:35,207 WindowServer[98]: Display 0x003f003e: Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
17/01/14 19:16:35,207 WindowServer[98]: Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
17/01/14 19:16:35,207 WindowServer[98]: CGXMuxBoot: Boot normal
17/01/14 19:16:35,228 WindowServer[98]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x00000007, accelerator 0x00004bd3, unit 0, caps QEX|MIPMAP, vram 512 MB
17/01/14 19:16:35,229 WindowServer[98]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x00000007, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
17/01/14 19:16:35,229 WindowServer[98]: GLCompositor: GL renderer id 0x01024301, GL mask 0x00000030, accelerator 0x00003427, unit 4, caps QEX|MIPMAP, vram 451 MB
17/01/14 19:16:35,229 WindowServer[98]: GLCompositor: GL renderer id 0x01024301, GL mask 0x00000030, texture max 8192, viewport max {8192, 8192}, extensions FPRG|NPOT|GLSL|FLOAT
17/01/14 19:16:35,229 WindowServer[98]: GLCompositor enabled for tile size [256 x 256]
17/01/14 19:16:35,229 WindowServer[98]: CGXGLInitMipMap: mip map mode is on
17/01/14 19:16:35,239 loginwindow[73]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
17/01/14 19:16:35,281 WindowServer[98]: Display 0x04272900: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
17/01/14 19:16:35,304 launchctl[133]: com.apple.findmymacmessenger: Already loaded
17/01/14 19:16:35,323 com.apple.SecurityServer[15]: Session 100005 created
17/01/14 19:16:35,355 UserEventAgent[135]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
17/01/14 19:16:35,372 airportd[91]: _doAutoJoin: Already associated to “Skynet”. Bailing on auto-join.
17/01/14 19:16:35,385 loginwindow[73]: Setting the initial value of the magsave brightness level 2
17/01/14 19:16:35,419 loginwindow[73]: Login Window Started Security Agent
17/01/14 19:16:35,487 SecurityAgent[141]: This is the first run
17/01/14 19:16:35,488 SecurityAgent[141]: MacBuddy was run = 0
17/01/14 19:16:35,514 SecurityAgent[141]: User info context values set for RakRobert
17/01/14 19:16:35,514 WindowServer[98]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04272900 device: 0x7f81f1c07190 isBackBuffered: 1 numComp: 3 numDisp: 3
17/01/14 19:16:35,514 WindowServer[98]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7f81f1c07190) - enabling OpenGL
17/01/14 19:16:35,805 loginwindow[73]: Login Window - Returned from Security Agent
17/01/14 19:16:35,843 loginwindow[73]: USER_PROCESS: 73 console
17/01/14 19:16:35,866 airportd[91]: _doAutoJoin: Already associated to “Skynet”. Bailing on auto-join.
17/01/14 19:16:35,000 kernel[0]: AppleKeyStore:Sending lock change 0
17/01/14 19:16:36,004 com.apple.launchd.peruser.501[146]: Background: Aqua: Registering new GUI session.
17/01/14 19:16:36,026 com.apple.launchd.peruser.501[146]: (com.apple.cmfsyncagent) Ignored this key: UserName
17/01/14 19:16:36,027 com.apple.launchd.peruser.501[146]: (com.apple.EscrowSecurityAlert) Unknown key: seatbelt-profiles
17/01/14 19:16:36,029 com.apple.launchd.peruser.501[146]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
17/01/14 19:16:36,034 launchctl[148]: com.apple.pluginkit.pkd: Already loaded
17/01/14 19:16:36,035 launchctl[148]: com.apple.sbd: Already loaded
17/01/14 19:16:36,043 distnoted[150]: # distnote server agent absolute time: 43.518467386 civil time: Fri Jan 17 19:16:36 2014 pid: 150 uid: 501 root: no
17/01/14 19:16:36,459 UserEventAgent[149]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
17/01/14 19:16:36,517 WindowServer[98]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
17/01/14 19:16:36,578 WindowServer[98]: Display 0x04272900: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
17/01/14 19:16:36,584 sharingd[172]: Starting Up...
17/01/14 19:16:36,677 com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
17/01/14 19:16:36,677 com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
17/01/14 19:16:36,678 com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
17/01/14 19:16:36,678 com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
17/01/14 19:16:36,678 com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
17/01/14 19:16:36,678 com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
17/01/14 19:16:36,678 com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
17/01/14 19:16:36,678 com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
17/01/14 19:16:36,678 com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
17/01/14 19:16:36,679 com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
17/01/14 19:16:36,679 com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
17/01/14 19:16:36,679 com.apple.audio.DriverHelper[173]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
17/01/14 19:16:36,691 SystemUIServer[163]: Cannot find executable for CFBundle 0x7f8eda014960 </System/Library/CoreServices/Menu Extras/Clock.menu> (not loaded)
17/01/14 19:16:36,707 configd[19]: network changed: DNS* Proxy
17/01/14 19:16:36,707 UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en1: SSID 'Skynet' making interface primary (protected network)
17/01/14 19:16:36,708 UserEventAgent[11]: Captive: CNPluginHandler en1: Evaluating
17/01/14 19:16:36,709 UserEventAgent[11]: Captive: en1: Probing 'Skynet'
17/01/14 19:16:36,710 com.apple.audio.DriverHelper[173]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
17/01/14 19:16:36,711 com.apple.audio.DriverHelper[173]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
17/01/14 19:16:36,711 com.apple.audio.DriverHelper[173]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
17/01/14 19:16:36,716 configd[19]: network changed: v4(en1!:192.168.1.227) DNS+ Proxy+ SMB
17/01/14 19:16:36,750 xpcproxy[189]: assertion failed: 13B42: xpcproxy + 3438 [EE7817B0-1FA1-3603-B88A-BD5E595DA86F]: 0x2
17/01/14 19:16:36,808 UserEventAgent[11]: Captive: CNPluginHandler en1: Authenticated
17/01/14 19:16:36,834 SystemUIServer[163]: Cannot find executable for CFBundle 0x7f8eda009bb0 </System/Library/CoreServices/Menu Extras/Battery.menu> (not loaded)
17/01/14 19:16:36,835 SystemUIServer[163]: Cannot find executable for CFBundle 0x7f8eda00a3c0 </System/Library/CoreServices/Menu Extras/Volume.menu> (not loaded)
17/01/14 19:16:36,958 com.apple.SecurityServer[15]: Session 100006 created
17/01/14 19:16:37,006 xpcproxy[197]: assertion failed: 13B42: xpcproxy + 3438 [EE7817B0-1FA1-3603-B88A-BD5E595DA86F]: 0x2
17/01/14 19:16:37,051 com.apple.IconServicesAgent[198]: IconServicesAgent launched.
17/01/14 19:16:37,204 WindowServer[98]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
17/01/14 19:16:37,224 WindowServer[98]: Received display connect changed for display 0x4272900
17/01/14 19:16:37,233 WindowServer[98]: Found 15 modes for display 0x04272900 [10, 5]
17/01/14 19:16:37,296 WindowServer[98]: CGXMuxAcknowledge: Posting glitchless acknowledge
17/01/14 19:16:37,325 WindowServer[98]: Received display connect changed for display 0x4272900
17/01/14 19:16:37,326 WindowServer[98]: Found 1 modes for display 0x04272900 [1, 0]
17/01/14 19:16:37,326 WindowServer[98]: Received display connect changed for display 0x3f003d
17/01/14 19:16:37,326 WindowServer[98]: Found 1 modes for display 0x003f003d [1, 0]
17/01/14 19:16:37,326 WindowServer[98]: Received display connect changed for display 0x3f003e
17/01/14 19:16:37,327 WindowServer[98]: Found 1 modes for display 0x003f003e [1, 0]
17/01/14 19:16:37,356 SystemUIServer[163]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
17/01/14 19:16:37,356 SystemUIServer[163]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
17/01/14 19:16:37,498 WindowServer[98]: Display 0x04272900: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
17/01/14 19:16:37,509 com.apple.time[149]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
17/01/14 19:16:37,529 accountsd[203]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
17/01/14 19:16:37,540 WindowServer[98]: Display 0x04272900: Unit 0; ColorProfile { 2, "Color LCD"}; TransferTable (256, 12)
17/01/14 19:16:37,557 com.apple.SecurityServer[15]: Session 100010 created
17/01/14 19:16:37,593 com.apple.SecurityServer[15]: Session 100011 created
17/01/14 19:16:37,614 apsd[181]: Unrecognized leaf certificate
17/01/14 19:16:37,617 accountsd[203]: /SourceCache/Accounts/Accounts-336.9/ACDAuthenticationPluginManager.m - -[ACDAuthenticationPluginManager credentialForAccount:client:handler:] - 230 - The authentication plugin for account "****" (17FA5DA7-897E-4427-8A30-1D222A1B882D) could not be found!
17/01/14 19:16:37,617 accountsd[203]: /SourceCache/Accounts/Accounts-336.9/ACDAccountStore.m - __62-[ACDAccountStore credentialForAccountWithIdentifier:handler:]_block_invoke389 - 857 - No plugin provides credentials for account ****. Falling back to legacy behavior.
17/01/14 19:16:37,672 com.apple.time[149]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
17/01/14 19:16:37,737 Messages[155]: Chat history path /Users/RakRobert/Library/Containers/com.apple.iChat/Data/Library/Messages/Archi ve Status: 2 totalExpected: 0 countProcessed: 0, forcing an import.
17/01/14 19:16:37,993 gamed[196]: CKSoftwareMap: Registering with Daemon
17/01/14 19:16:38,479 com.apple.time[149]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
17/01/14 19:16:38,515 com.apple.NotesMigratorService[221]: Joined Aqua audit session
17/01/14 19:16:38,537 com.apple.internetaccounts[197]: An instance 0x7fa759da1500 of class IMAPMailbox was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x7fa759da1620> (
<NSKeyValueObservance 0x7fa759da15b0: Observer: 0x7fa759da03c0, Key path: uidNext, Options: <New: NO, Old: NO, Prior: NO> Context: 0x7fff8db9744b, Property: 0x7fa759d62830>
17/01/14 19:16:38,556 com.apple.internetaccounts[197]: An instance 0x7fa75b84c900 of class IMAPMailbox was deallocated while key value observers were still registered with it. Observation info was leaked, and may even become mistakenly attached to some other object. Set a breakpoint on NSKVODeallocateBreak to stop here in the debugger. Here's the current observation info:
<NSKeyValueObservationInfo 0x7fa75b84cb20> (
<NSKeyValueObservance 0x7fa75b84c9b0: Observer: 0x7fa75b81df00, Key path: uidNext, Options: <New: NO, Old: NO, Prior: NO> Context: 0x7fff8db9744b, Property: 0x7fa759d62830>
17/01/14 19:16:38,599 sandboxd[217]: ([128]) ntpd(128) deny file-read-data /private/var/run/resolv.conf
17/01/14 19:16:38,651 sandboxd[217]: ([128]) ntpd(128) deny file-read-data /private/var/run/resolv.conf
17/01/14 19:16:38,867 Dock[162]: CGSGetWindowOwner
17/01/14 19:16:38,867 Dock[162]: CGSGetWindowBounds
17/01/14 19:16:38,867 Dock[162]: CGSSetWindowToReleaseBackingOnOrderOut: Invalid window 0xffffffff
17/01/14 19:16:38,867 Dock[162]: CGSGetWindowOwner
17/01/14 19:16:38,867 Dock[162]: CGSGetWindowBounds
17/01/14 19:16:38,999 VDCAssistant[224]: AVF encoder error: fail to create accelerator instance
17/01/14 19:16:39,390 com.apple.dock.extra[208]: <NSXPCConnection: 0x7fdfc5812770>: received an undecodable message (no exported object to receive message). Dropping message.
17/01/14 19:16:39,434 usernoted[179]: Connection does not have the proper entitlement (com.apple.developer.notificationcenter-identifiers) to connect on behalf of com.apple.appstore. All communication will be denied.
17/01/14 19:16:39,440 usernoted[179]: Connection does not have the proper entitlement (com.apple.private.notificationcenter-system) to connect to the system notification center. All communication will be denied. center com.apple.storeagent
17/01/14 19:16:39,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=246[GoogleSoftwareUp] final status 0x0, allow (remove VALID)ing page
17/01/14 19:16:39,627 com.apple.launchd.peruser.501[146]: (com.apple.iTunesHelper.199968[248]) Spawned and waiting for the debugger to attach before continuing...
17/01/14 19:16:39,671 com.apple.launchd.peruser.501[146]: (com.google.GoogleDrive.199616[249]) Spawned and waiting for the debugger to attach before continuing...
17/01/14 19:16:39,685 com.apple.launchd.peruser.501[146]: (com.hegenberg.BetterTouchTool.116896[251]) Spawned and waiting for the debugger to attach before continuing...
17/01/14 19:16:39,734 WiFiKeychainProxy[236]: [NO client logger] <Aug 30 2013 23:40:46> WIFICLOUDSYNC WiFiCloudSyncEngineCreate: created...
17/01/14 19:16:39,734 WiFiKeychainProxy[236]: [NO client logger] <Aug 30 2013 23:40:46> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
17/01/14 19:16:39,908 BetterTouchTool[251]: init
17/01/14 19:16:39,909 Google Drive[249]: PyObjCPointer created: at 0xa0f69418 of type {__CFBoolean=}
17/01/14 19:16:39,910 Google Drive[249]: PyObjCPointer created: at 0xa0f69410 of type {__CFBoolean=}
17/01/14 19:16:39,913 Google Drive[249]: PyObjCPointer created: at 0xa0f69420 of type {__CFNumber=}
17/01/14 19:16:39,913 Google Drive[249]: PyObjCPointer created: at 0xa0f69430 of type {__CFNumber=}
17/01/14 19:16:39,914 Google Drive[249]: PyObjCPointer created: at 0xa0f69440 of type {__CFNumber=}
17/01/14 19:16:40,335 mDNSResponder[70]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FDDED819160 Raks-MacBook-Pro.local. (AAAA) that's already in the list
17/01/14 19:16:40,335 mDNSResponder[70]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FDDED8195F0 A.B.7.F.F.3.E.F.F.F.D.6.8.A.A.6.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
17/01/14 19:16:40,335 mDNSResponder[70]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FDDEC806160 Raks-MacBook-Pro.local. (Addr) that's already in the list
17/01/14 19:16:40,335 mDNSResponder[70]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007FDDEC8065F0 227.1.168.192.in-addr.arpa. (PTR) that's already in the list
17/01/14 19:16:40,991 iTunes[159]: ApplePushService: APSConnection being used without a delegate queue
17/01/14 19:16:41,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=263[ksadmin] final status 0x0, allow (remove VALID)ing page
17/01/14 19:16:41,169 Google Drive[249]: GsyncAppDeletegate.py : Finder debug level logs : False
17/01/14 19:16:41,000 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=266[ksadmin] final status 0x0, allow (remove VALID)ing page
17/01/14 19:16:41,411 com.apple.InputMethodKit.UserDictionary[268]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](760): CoreData: Ubiquity: RakRobert~E043868B-B172-537B-971F-E284B30E4D30:UserDictionary
Using local storage: 1
17/01/14 19:16:41,481 com.apple.InputMethodKit.UserDictionary[268]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](760): CoreData: Ubiquity: RakRobert~E043868B-B172-537B-971F-E284B30E4D30:UserDictionary
Using local storage: 0
17/01/14 19:16:42,725 Finder[164]: Loading Google Drive Finder extension
17/01/14 19:16:42,726 Finder[164]: GDMenuHandler instantiated
17/01/14 19:16:49,867 parentalcontrolsd[285]: StartObservingFSEvents [849:] -- *** StartObservingFSEvents started event stream
17/01/14 19:16:55,000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0PS (kSMCKeyNotFound)
17/01/14 19:16:55,000 kernel[0]: SMC::smcReadKeyAction ERROR: smcReadData8 failed for key B0OS (kSMCKeyNotFound)
17/01/14 19:16:55,770 distnoted[292]: assertion failed: 13B42: liblaunch.dylib + 25164 [FCBF0A02-0B06-3F97-9248-5062A9DEB32C]: 0x25
17/01/14 19:16:56,001 com.apple.SecurityServer[15]: Session 100003 created
Thanks a lot!
<Email Edited By Host>
Hi RobertRak
I can only say I have a Samsung SSD 840 EVO 1TB installed in my MacBook Pro 17”. Speeds are exquisite: Write: 479.1MB/s Read: 508.9MB/s
Like Melophage, I left the Optical drive in place.
My only thought for your case is to check firmware of the Samsung SSD drive.
Samsung SSD website: http://www.samsung.com/global/business/semiconductor/samsungssd/downloads.html
I think i used DiskUtility to clone the ISO to USB flashdrive or CD-RW. It was a challenge to get the Mac to boot from their DOS, but once successful you should get to the latest firmware. The Samsung needs to be in the internal SATA connection.
Be aware that the POST check your Mac does on startup will always take time. Depends on amount of RAM, how long your other internal spindle drive takes to get to speed and unpark the heads etc.
Can't say i've counted the boot time on mine. I know it's quicker now since putting the SSD in.
You will need at least 10% free space left on the boot SSD too BTW.
Hope this assists.
From System Information:
Intel 6 Series Chipset:
Vendor: Intel
Product: 6 Series Chipset
Link Speed: 6 Gigabit
Negotiated Link Speed: 6 Gigabit
Physical Interconnect: SATA
Description: AHCI Version 1.30 Supported
Samsung SSD 840 EVO 1TB:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: Samsung SSD 840 EVO 1TB
Revision: EXT0BB0Q
Serial Number: XXXXXXXXXXXXXXXX
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Medium Type: Solid State
TRIM Support: No
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Similar Messages
-
Macbook pro wont sleep after ram upgrade
Hi,
I have a 17" Macbook pro late 2011. I upgraded the ram from 8gb to 16gb last week and now I having trouble with sleep. When the laptop goes to sleep it always to seems to go into hibernation mode. When I open the lid I can only wake the computer by holding the power button for around 7 secs and then it does a restore from the HD. I've tried a PRAM + SMC reset. Also tested the ram and everything seems good. Below is the output from pm set, the console after hibernation restore (filtered for the word 'sleep') and the memtest. Any help would be appreciated.
-- PMSET
MacBook-Pro:nlc phil$ pmset -g
Active Profiles:
Battery Power -1
AC Power -1*
Currently in use:
standbydelay 4200
standby 0
womp 1
halfdim 1
hibernatefile /var/vm/sleepimage
gpuswitch 2
sms 1
networkoversleep 0
disksleep 10
sleep 37
hibernatemode 3
ttyskeepawake 1
displaysleep 3
acwake 0
lidwake 1
--- console
1/05/2015 9:49:34.852 am GoogleSoftwareUpdateAgent[11054]: 2015-05-01 09:49:34.163 GoogleSoftwareUpdateAgent[11054/0xa0c2f1d4] [lvl=2] -[KSAgentApp setupLoggerOutput] Agent settings: <KSAgentSettings:0x5098d0 bundleID=com.google.Keystone.Agent lastCheck=2015-04-30 04:24:22 +0000 checkInterval=18000.000000 uiDisplayInterval=604800.000000 sleepInterval=1800.000000 jitterInterval=900 maxRunInterval=0.000000 isConsoleUser=1 ticketStorePath=/Users/phil/Library/Google/GoogleSoftwareUpdate/TicketStore/Key stone.ticketstore runMode=3 daemonUpdateEngineBrokerServiceName=com.google.Keystone.Daemon.UpdateEngine daemonAdministrationServiceName=com.google.Keystone.Daemon.Administration logEverything=0 logBufferSize=2048 alwaysPromptForUpdates=0 productIDToUpdate=(null) lastUIDisplayed=(null) lastCheck=2015-04-30 04:24:22 +0000 alwaysShowStatusItem=0 updateCheckTag=(null) printResults=NO userInitiated=NO>
1/05/2015 10:39:44.654 am Timings[736]: AppTracking stopped due to sleep or shut down
1/05/2015 10:42:46.000 am kernel[0]: ACPI: sleep states S3 S4 S5
1/05/2015 10:42:49.323 am discoveryd[73]: Basic SleepProxy BSP Server Disabled. Metric = 3373
1/05/2015 10:42:49.344 am discoveryd[73]: Basic SleepProxy Could not get the primary interface
1/05/2015 10:42:49.353 am discoveryd[73]: Basic SleepProxy Sleep Proxy Server is not enabled
1/05/2015 10:42:54.725 am discoveryd[73]: Basic SleepProxy Could not get the primary interface
1/05/2015 3:38:01.187 pm GoogleSoftwareUpdateAgent[5941]: 2015-05-01 15:36:40.022 GoogleSoftwareUpdateAgent[5941/0xa0c2f1d4] [lvl=2] -[KSAgentApp setupLoggerOutput] Agent settings: <KSAgentSettings:0x319240 bundleID=com.google.Keystone.Agent lastCheck=2015-04-30 23:49:37 +0000 checkInterval=18000.000000 uiDisplayInterval=604800.000000 sleepInterval=1800.000000 jitterInterval=900 maxRunInterval=0.000000 isConsoleUser=1 ticketStorePath=/Users/phil/Library/Google/GoogleSoftwareUpdate/TicketStore/Key stone.ticketstore runMode=3 daemonUpdateEngineBrokerServiceName=com.google.Keystone.Daemon.UpdateEngine daemonAdministrationServiceName=com.google.Keystone.Daemon.Administration logEverything=0 logBufferSize=2048 alwaysPromptForUpdates=0 productIDToUpdate=(null) lastUIDisplayed=(null) lastCheck=2015-04-30 23:49:37 +0000 alwaysShowStatusItem=0 updateCheckTag=(null) printResults=NO userInitiated=NO>
1/05/2015 4:59:19.731 pm Timings[3645]: AppTracking stopped due to sleep or shut down
1/05/2015 5:03:39.164 pm coreaudiod[242]: 2015-05-01 05:03:39.163645 PM [AirPlay] Power: SystemWillSleep
1/05/2015 5:03:55.473 pm discoveryd[73]: Basic BTMMServer Sleep offload failed. Start deregistering
1/05/2015 5:03:58.000 pm kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
1/05/2015 5:04:00.000 pm kernel[0]: hibernate image path: /var/vm/sleepimage
1/05/2015 5:04:01.000 pm kernel[0]: Opened file /var/vm/sleepimage, size 8589934592, partition base 0x0, maxio 2000000 ssd 1
2/05/2015 6:37:59.000 am kernel[0]: Previous sleep cause: -60
2/05/2015 6:38:00.118 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Reordering authw 0x7fc7a2c78d80(2000) (lock state: 3)
2/05/2015 6:38:00.168 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: err 0x0
2/05/2015 6:40:58.537 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/05/2015 7:01:11.312 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/05/2015 7:09:06.117 am GoogleSoftwareUpdateAgent[8440]: 2015-05-02 07:09:04.977 GoogleSoftwareUpdateAgent[8440/0xa0c2f1d4] [lvl=2] -[KSAgentApp setupLoggerOutput] Agent settings: <KSAgentSettings:0x545fe0 bundleID=com.google.Keystone.Agent lastCheck=2015-05-01 05:38:03 +0000 checkInterval=18000.000000 uiDisplayInterval=604800.000000 sleepInterval=1800.000000 jitterInterval=900 maxRunInterval=0.000000 isConsoleUser=1 ticketStorePath=/Users/phil/Library/Google/GoogleSoftwareUpdate/TicketStore/Key stone.ticketstore runMode=3 daemonUpdateEngineBrokerServiceName=com.google.Keystone.Daemon.UpdateEngine daemonAdministrationServiceName=com.google.Keystone.Daemon.Administration logEverything=0 logBufferSize=2048 alwaysPromptForUpdates=0 productIDToUpdate=(null) lastUIDisplayed=(null) lastCheck=2015-05-01 05:38:03 +0000 alwaysShowStatusItem=0 updateCheckTag=(null) printResults=NO userInitiated=NO>
2/05/2015 7:19:11.035 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/05/2015 7:35:18.701 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Deferring.
2/05/2015 7:37:35.421 am coreaudiod[242]: 2015-05-02 07:37:35.420950 AM [AirPlay] Power: SystemWillSleep
2/05/2015 7:37:57.995 am discoveryd[73]: Basic BTMMServer Sleep offload failed. Start deregistering
2/05/2015 7:38:01.000 am kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
2/05/2015 7:38:03.000 am kernel[0]: hibernate image path: /var/vm/sleepimage
2/05/2015 7:38:03.000 am kernel[0]: Opened file /var/vm/sleepimage, size 8589934592, partition base 0x0, maxio 2000000 ssd 1
2/05/2015 7:38:28.000 am kernel[0]: sleep
2/05/2015 7:38:33.000 am kernel[0]: Previous sleep cause: 5
2/05/2015 7:38:33.393 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: NULL shield_window (lock state: 1)
2/05/2015 7:38:56.292 am coreaudiod[242]: 2015-05-02 07:38:56.291574 AM [AirPlay] Power: SystemWillSleep
2/05/2015 7:38:57.288 am discoveryd[73]: Basic BTMMServer Sleep offload failed. Start deregistering
2/05/2015 7:39:00.000 am kernel[0]: AirPort_Brcm43xx::powerChange: System Sleep
2/05/2015 7:39:02.000 am kernel[0]: hibernate image path: /var/vm/sleepimage
2/05/2015 7:39:02.000 am kernel[0]: Opened file /var/vm/sleepimage, size 8589934592, partition base 0x0, maxio 2000000 ssd 1
2/05/2015 8:16:54.000 am kernel[0]: Previous sleep cause: 5
2/05/2015 8:16:54.588 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: Reordering authw 0x7fc7a2cc74b0(2000) (lock state: 3)
2/05/2015 8:16:54.589 am WindowServer[147]: handle_will_sleep_auth_and_shield_windows: err 0x0
MEMTEST
Mac OS X 10.10.3 (14D136) running in multiuser mode
Memory Page Size: 4096
System has 8 Intel core(s) with SSE
Requested memory: 10327MB (10829672448 bytes)
Available memory: 10327MB (10829672448 bytes)
Allocated memory: 10327MB (10829672448 bytes) at local address 0x0000000101000000
Attempting memory lock... locked successfully
Partitioning memory into 2 comparison buffers...
Buffer A: 5163MB (5414836224 bytes) starts at local address 0x0000000101000000
Buffer B: 5163MB (5414836224 bytes) starts at local address 0x0000000243bfd800
Running 1 test sequence... (CTRL-C to quit)
Test sequence 1 of 1:
Running tests on full 10327MB region...
Stuck Address : ok
Linear PRN : ok
Running comparison tests using 5163MB buffers...
Random Value : ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : ok
Block Sequential : ok
Checkerboard : ok
Bit Spread : ok
Bit Flip : ok
Walking Ones : ok
Walking Zeroes : ok
All tests passed! Execution time: 3076 seconds.Hi fatlinesofcode,
First of all, check out Apples article on the issue: OS X Yosemite: If your Mac won’t go to or stay in sleep If you find these steps don't help, try a few of the following
A common cause for the Mac not sleeping is your printer. If there are queued jobs waiting to be printed, but your printer is switched off, for some reason you Mac just wont like it and simply will not go to sleep. System Preferences > Print and Scan > Open Print Queue
Do you have an Ethernet Cable connected? People have reported in the past that removing their Ethernet allowed their Mac to sleep. This goes for other things you may have connected directly to your Mac also.
Try heading into your Mac Preferences > Sharing and deselecting 'Internet Sharing' as well as 'Printer Sharing'.
Also deselect Wake For Network Access by heading to System Preferences > Energy Saver > Power Adapter > Wake For Network Access.
Energy Saver > Schedule > Startup or Wake - Uncheck.
Alternatively, set your system preferences to Never Sleep, and put into Sleep manually: System Preferences > Energy Saver > Computer Sleep > Never.
Good luck! -
My Macbook Pro wont boot after upgrading to SSD, A ? Mark on Folder appears
Hello all,
I just put in a new SSD into my mid 2012, 13" macbook pro. This is the exact SSD http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=77394 89&tab=7&SRCCODE=WEBLET03ORDER&cm_mmc=Email-_-WebletMain-_-WEBLET03ORDER-_-Deals &utm_source=EML&utm_medium=main&utm_campaign=WEBLET03ORDER&cm_lm=noahbragg@cedar ville.edu
I swapped out my optical drive and put in the SSD using this tutorial, http://www.ifixit.com/Guide/Installing+MacBook+Pro+13-Inch+Unibody+Mid+2012+Dual +Hard+Drive/13787 Everything seemed to go fine and i had no problems. But when I tried to start up the computer it stayed on a gray screen and a foler with a question mark on it, showed up blanking. I have looked all over for the internet for the answer, I have tried to reset the PRAM but it did nothing. I then tried to select what drive i wanted to boot from by holding the option key when i booted, but when the options came up, SSD or old harddrive did not come up as a way to boot up. There were some internet options to recover but they did not work.
The SSD has nothing on it at this point, but my plan was to boot up using the original HD and then clone it over to the SSD, but ovbiously i cant even find the HD to boot to. I have seen that people are having troubles with booting to their SSD because of the new mavericks update, but i am just trying to boot to my original HD at this point.
I also considered that maybe i possibly damaged the HD cables through static electricty, but when i searched more about it i learned that i should have heard snap or felt a jolt. None of these things happened when i installed the SSD. So i beleive that the hard drive or SSD are not broken in any way.
Does anyone have any ideas or suggestions on how i can fix this? Need my computer very badly! thanks in advance.I also forgot to mention that after the first time i tried to boot, it went to the normal screen where it wanted me to put in my apple id password. but the loading wheel was just spinning the whole time. so i turned off the computer and tried again. thats when the question mark folder came up and kept coming up everytime after that.
-
Samsung SSD in Macbook Pro, slow boot.
So I bought an 256GB Samsung 830 SSD for my Macbook Pro (mid 2009 2.66Ghz 15"). Anyway, I installed it tonight and I've been having a lot of problems with it as an internal drive. I had been using a 750GB WD Black for a long time and it's worked great. So first, I put the SSD in the Internal, and put the Mountain Lion Install USB in, and it would never install. I could format the drive using the USB Disk, but I couldn't install it. I kept getting an error about downloading extra components. Well I put it in an External Firewire enclosure and put the WD back in the computer, and ran the ML installer from inside Mountain Lion. Lo and behold, from Firewire, it boots up very fast and everything. So once it was all installed and setup using the external, I put the SSD inside the computer. Now, it takes about 2 minutes on the Apple screen, then I get a cursor for a few seconds, then no Apple, and a spinning grey pinwheel that never goes away. The WD HDD has been working beautifully the past year and given the SSD works great externally, i'm not sure what the deal is. I've reset the NVRAM, and SMC. So when I boot from my WD HDD in the External, it boots fine. So I went to System Prefs and tried to set the SSD as the startup disk. It won't let me, says something about the Bless tool. Any thoughts as to what is going on? I hope the SSD isn't bad, but since it works great outside the computer but not in, i'm wondering what's going on.
Thanks!Also some more background: When I got the 750 WD over a year ago (about a year and a half) my computer got all sorts of freezes. Well I narrowed it down to the 1.7 Firmware. So I downgraded to the 1.6 Firmware and it fixed my problem. So I was running the 1.6 Firmware until this July, when I had to take my computer to get the Logic Board replaced (Well, screen was first but the Geniuses messed up, so they had to put a new logic board in) and the firmware is now 1.7, but I haven't had any problems with the drive since. That goes for Snow Leopard and Mountain Lion. So old logic board wouldn't work with 1.7, new logic board did. I'm wondering if it is the firmware giving me fits, because if so i'll just send the drive back because there's no use running at 1.5Gbps when the drive is capable of far beyond that.
-
MacBook Pro slow shutdown after installing SSD drive
Hi,
Just got a new 256GB SSD drive and installed it in my Macbook Pro, super super fast might I add. Startup in a couple of seconds, and apps open very fast. The only problem is the shutdown time, it takes over a minute to shutdown, really strange. I've read this post;
http://discussions.apple.com/thread.jspa?messageID=13097765
But this does not solve my problem. Any ideas what could be the problem?Have you tried booting into your Recovery partition (holding down the Command and R keys whilst booting).
I don't know why an iTunes update would cause your MBP to shutdown and not turn back on. If you can't boot into your Recovery partition, try running the Apple Hardware Test (if you can - if you can't, it's time for a trip to your local Apple Store or AASP).
Clinton -
Macbook pro slow start after upgrading to mountain lion
I have a macbook pro core 2 due originally runing Mac os x 10.6. I upgraded to mac os x 10.8.1 now and realized that the computer becomes slow start and shut down. Scanned with OnlyX and followed the instruction by restarting with hold down option-command-P and R, showed no help.
How could I solve the problem?
Thanks.Remove items from System Preferences > Users & Groups > Login Items
And HD > Library > StartupItems
Then restart your Mac. -
Macbook pro slow internet after upgrade osx mountain lion
Slow safari after upgrade to osx moutain lion.
Have you reset Safari? Yet? Top left corner of the screen next to the apple logo click on the word Safari, then click reset safari, make sure everything is checked then click reset. Also try:
Repair your permissions. Go to applications then to the "other" folder then go to disk utility, on the left hand side you will see a white box. Select the second option, usually called "mac HD" with that selected click on "repair permissions" in the center towards the bottom of the screen. Wait for it to complete, then see if this fixes the issue. -
Macbook pro not booting after software update
Dear all,
Since two days ago my macbook pro hangs at the gray apple screen, the round circle keeps on turning. Kept it running for nights but it does not exit this status. I read on the internet that I could run it in verbose mode, that's what I did, see screenshot below. What do you recommend? This seems to be a hard disk issue. How can I boot up in safe mode and possibly recover the hard disk data? Any other recommendations?
Thanks,Get your Mac to a Computer repair service, or do it yourself. You will need to put it in an external SATA reader, like I did. I recovered files via an older mac running Slow Leopard and copied files to it.
What I did:
1. You will have to remove the screws at the bottom of your Mac, in order to get to the HDD (or SSD, whatever you have).
2. You need to remove the HDD and put it in an external Case/SATA reader
3. Copy files from your HDD to another Mac
4. On that other Mac, go to Disk Utility (search in spotlight) and Erase as 'Mac OS X Extended (Journaled)'
5. Download Mountain lion on another Mac from the AppStore, and go to that Applications folder.
6. Right click on the downloaded file and select “Show Package Contents”. Go to “Contents” and jump inside the “SharedSupport” folder and you’ll find a file titled “InstallESD.dmg”. Copy this over to the desktop.
7. Plug in a USB flash drive to your Mac having at least 4GB memory. We highly suggest going ahead with an 8GB one just to be on the safe side.
8. Now open up “Disk Utility” and drag InstallESD.dmg from the desktop to the left-hand sidebar. Select the attached USB from left side and click on “Partition” tab.
9. Select “1 Partition” from the Volume Scheme dropdown menu. Choose “Mac OS Extended (Journaled)” from the left.
10. Now click on “Option” at the bottom. Select “GUID Partition Table” and press OK. Now click on Apply at the bottom right to start formatting.. (NOTE: This is will erase all data on your USB flash drive)
11. Once the drive has been formatted, click on “Restore” (it’s right next to where you clicked on “Partition in Step 5).
12. Choose USB drive you plugged-in in Step 5 as “Destination” with the InstallESD.dmg file as “Source”.
13. Click Restore and type in your password (if you have any). This will create the intended Lion bootable USB flash drive
14. Reboot your Mac with the USB drive plugged in. Hold the “Option” key on your keyboard when you hear the iconic OS X startup chime. You can now boot into your Flash drive from there.
15. Follow the on-screen instructions to install OS X , and after that, reboot
16. Format USB back to FAT in Disk Utility, copy your files from old PC to new using the USB.
That's it, you're done . Takes a lot of time, but recovered my Mac this way! -
MacBook Pro Slow Boot / Login?
Hi,
I've recently upgraded my computer to an SSD (OWC Mercury Electra 6G) using the data doubler, with the SSD in the system drive and my old HDD in the optical bay. I did a fresh install of OS 10.9.5 onto the SSD.
The Laptop is a 2011 MacBook Pro 15", 2.3gHz with 8gb ram.
All seems good once I'm inside OSX, however it takes a couple of minutes to boot up, as well as freezes on the login screen for around 20 seconds (cannot see key presses in the password field, however they show up later, just lagged).
Any suggestions? The SSD is selected as the boot drive, and I have tried a PRAM reset.
Thank you!
SimonHi,
Definitely try the Combo Updater…
Also have a look at the Install Discs (Grey) that shipped with your MacBook and see which Version of OS X is on them…
According to the information I can find the latest version shipped is 10 6 3…
Just an educated guess… But Your problems could be arising from how your Mac was Updated to 10 6 4
If the Combo Update does not fix your issues then try a Reinstall.
" Insert your Snow Leopard installation disc, then restart while holding down the C key.
When prompted, choose the normal “Install” option.
Make sure to select *“Preserve Users and Network Settings.”*
After installation, you’ll be left with an earlier iteration of Mac OS X 10.6.x but an otherwise largely intact system.
Download the *10 6 6 Combo Update* and apply it…
You may need to restore some saved username/password information, browser information, etc. "…
The above was 'gleaned' from this Link:
http://appletoolbox.com/category/mac/
Hope this helps,
Cheers -
Retina macbook pro slow boot up and shutdown?
I have a Macbook Pro with retina display (2.6/16/512) and it's just 2 weeks old. When i first got it bootup and shutdown times were pretty awesome (Below 15 seconds for cold bootup and 5 seconds for shutdown). Now after installing many applications (final cut pro, aperture, logic pro, adobe master suite [photoshop, illustrator etc.] and few other apps) my computer seems slow both when booting up (25 seconds) and shutting down (31 seconds), it doesn't seem right to me as the rMBP uses an all flash architecture and is supposed to be fast in booting up and shutting down. Now shutting down took longer than booting up (which is kinda wierd) and sometimes when shutting down the menubar on top is still visible even though the screen had gone to the white image. Can anyone provide any explanations or suggestions to remedy this issue? Thanks in advance.
I am experiencing the same problem - except my Boot time is over a minute!!! - When I received it I was amazed at the boot time speed in comparison to my old MacBook Pro 17" - I've noticed the machine has become increasingly more sluggish when using certain applications such as Photoshop and RapidWeaver.
Reinstalling Mountain Lion had no real affect in improving the situation - I do have large Aperture Libraries - and use Creative Suite 5 reguarly.
Would be happy for some advice on what maybe the issue. - I am bit dissapointed at this point - Spending that much money on a machine that I bought for the performance boost and now that has slowed right down isn't sitting right with me. -
Brand new macbook pro slows down after I transfer files on from old computer
Hey, I just purchased a brand new Macbook Pro 3.5 GhZ Haswell processor, 500 gb of flash memory, 16 gb of RAM, OS X Mavericks, 17" retina display and while it's been great upon first booting up after I transferred over my music and books and docs from my old mac (about 150 gb worth (so I still have over 300 gb free on the new one)) I've seen a massive slow down and it's started giving me the beach ball of death which was the main reason I got a new macbook as my old one was beach balling so much it was nearly unusable. Very upset that this brand new stupidly expensive computer is already doing this. Any advice is apppreciated.
Either your RAM is no good, of poor quality, the wrong specs or it's not installed correctly or it got subjected to static electricity when you put it in.
Best Buy isn't as Mac centric, thus the quality of RAM that Mac's require may not be there.
You should have purchased from Crucial.com or Other World Computing or similar that tests the RAM to make sure it works the first time you put it in, as it costs everyone money to ship bad RAM back and forth.
I put in 16GB a couple of days ago, took five minutes and it works perfectly.
Nothing like top tier RAM for a top of the line machine, especially with all those tiny, easy to lose screws Apple uses. -
I recently bought a 2011 Macbook pro, and here are the specs.
2.3 Ghz i7 quad core
8gb ram
and 500 gb HDD (7200)
I had restored the laptop and formatted the HDD, and then installed Maverick on it.
The bootup time is about 2-3 minutes before I get to the log in screen.
Also, when I check my system activity, and check the memory being used, it shows that 4 gb is being used...This is just after logging in from a fresh restart. This doesn't seem right to me. I made sure there are not applications to be started after boot up either.
Any advice on what could be the cause of these problems?
Thanks.Booting in safe mode is slow because the startup volume is being checked and caches are being deleted. This is not something you should have to do many times in the life of the machine.
-
Macbook Pro cannot boot after Yosemite install
I just (tried) to upgrade to Yosemite (from latest version of Mavericks) on a brand new Macbook Pro. It installed the OS, I got to type my iCloud information etc - and I saw a glimpse of the desktop, but then:
I got the Black screen of death (the one where you can only reboot with text in different languages).
Then, when rebooting I got Apple logo + plus a progress bar (see attachment)
And then a stop sign. (see attachment)
I have tried holding down power button and restart manually 5 times - no luck. The mac is stuck, and I cannot boot.
Please help - I need to get back to work.Had the exact same problem on my Macbook Air. Apple Support had me boot with Command-R and repaired disk in Disk Utility. Everything seemed fine so they told me to reinstall, which I did. After a few hours I went back to the screen and it asked me to type in my password. After that is tries to install some more and then I get the following message:
OS X could not be installed on your computer.
This core storage operation is not allowed on a sparse logical volume group.
Quit the installer to restart your computer and try again.
Each time I try to reboot I get the same message. -
My fix for slow boot after Leopard Upgrade
I was having the same issue as a lot of others in posts about extremely slow boot up times after upgrading from Tiger to Leopard. I spent a lot of time on the phone with Apple Support but in the end I stumbled across a fix for my situation.
After power up and getting to the login screen (about 5-6 seconds), it would take about 3 minutes to fully populate the desktop after entering my password. Most of that time just sitting at the login screen. Extremely painful.
My MacBook connects to a Windows Active Directory network. I was able to fix my slowness by disabling the Active Directory service. I was concerned at first but my bound volumes still work. I don't use a lot of AD services from my Mac so I at this point I have not found any issue with this fix.
To disable, go to Directory Utility, select services and if you have Active Directory enabled, disable it.
My boot time increased from 3 minutes to less than 15 seconds. Better than Tiger.
Tech Support is aware of this issue and has reported it the OS team for a fix.Hi-
Do you have a Tiger volume to test your machine with?
Do you still have video in Tiger?
If you don't have a Tiger volume to test on, I would consider such as an important troubleshooting step
So now I am wondering if it is the PCI slot that suddenly stopped working after the OS upgrade. Does anyone know if this is a documented issue and if there is a fix for it?
There are no issues with the AGP slot in relation to an OS version. -
Can't Install windows on Macbook Pro Early 2011 with SSD upgrade
Dear all,
A few months ago I had an SSD upgrade and I purchased a Caddy and installed my old HDD on it, and I also changed my Battery because the old one only lasted for 15 inutes after 40 cycles :O
Anyways when I insert a windows 7 or 8 x64 DVD in my USB Samsung DVD Drive, My mac book detects Windows (with the windows 7 DVD) and Detects Windows and EFI Boot (with Windows 8), I have tried every option of those doesn't work.
With EFI it just boots Mac
With Windows it boots to a screen with one blinking cursor top left and then it ejects the DVD ROM and that it :s
I do not know what is wrong :/
P.S. when i installed the SSD I had windows on the old drive it didn't work after the upgrade (this is what made me link both incidents).I am willing to try this, but I was kinda trying to find a solution that doesn't need me to unscrew stuff ..etc
Maybe you are looking for
-
ASA 5505, error in Access Rule
Hello. Tha ASA 5505 is working, but I try to allow http and https from internet to a server running 2012 Essentials. The server has the internal IP 192.168.0.100. I have created an Object called SERVER with IP 192.168.0.100 The outside Interface is c
-
HT202213 How do I unregister a computer with home sharing, to register a different one?
How do I unregister a computer with home sharing, to register a different one?
-
Remove Context Menu for KM Content for Anonymous User
Hi All, I have implemented External Facing Portal and i have to show KM documents on Anonymous user home page. For This I have created JSP page and have created url iview for this created JSP application. On this JSP page to access KM i have used be
-
Query to find the start and end date of current quarter
I want a query to give me the start date and end date of current quarter I don't want to use TRUNC and ROUND as the 16th day roundoff logic is not required. Thanks in advance.
-
Substitution Variable Capacity
Does anyone remember if there is a substitution variable capacity (how many can exist per database) and what that number is?I've got some nasty reporting requirements for Analyzer which require 72 new variables be added and managed.Bill HodgsonMen's