Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

If you use an HDMI cable, the audiostream will be integrated, so there will be sound when using an HDMI cable!
Not necessarily. That only works as stated if you have one of the most recent MBP's that has a built-in HDMI port.
If the MBP only has a Thunderbolt or miniDisplayPort, you need an appropriate adapter cable and even if you use an HDMI adapter or cable to connect to your HDTV there is no guarantee it will carry audio. You have to determine if your specific MBP model supports audio out through its miniDisplayPort or Thunderbolt output, and whether the adapter does likewise.

Similar Messages

My macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?

my macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Hi there, i've just updated safari 5.0.6 for my macbook pro (os x 10.5.8), but i've not been able to install any programs from the extension gallery. Appreciate any advice?

Hi there, i've just updated safari 5.0.6 for my macbook pro (os x 10.5.8), but i've not been able to install any programs from the safari extension gallery. Appreciate any advice?

but i've not been able to install any programs from the safari extension gallery
In order to use the Safari Extensions Gallery you need to upgrade to Snow Leopard v10.6
See system requirements here: http://www.apple.com/safari/download/
If you want to upgrade to v10.6, make sure your Mac meet's Snow Leopard's - Technical Specifications
Purchasing available here > Mac OS X 10.6 Snow Leopard - Apple Store (U.S.)

I have MacBook Pro (early 2011) with Mac OS X 10.6.8. How to make Cannon MF 5770 printing? I know that Canon have not provided drivers. Is it any way around it?

I have MacBook Pro (early 2011) with Mac OS X 10.6.8. How to make Cannon MF 5770 printing? I know that Canon have not provided drivers. Is it any way around it?

Updated printer drivers.
http://support.apple.com/kb/DL899

I cannot connect a Sony ILCE6000 camera for wireless downloading. Sony feels I need DLNE? They do not know how to make it work. Can anyone help OS10·9·5

I cannot connect a Sony ILCE6000 camera for wireless downloading. Sony feels I need DLNE? They do not know how to make it work. Can anyone help OS10·9·5

I cannot use the software.. so you need to figure out where the problem is..
But let me suggest.. the Mac is not the issue and likely the info from Sony is also up the creek.. they make PC's after all.
It is far more likely the camera is having issues with the wireless network.
Do you know you have a connection to the home network on the camera.. ?? You have an IP address and some internet or local access at least?
How you will discover those things is by fiddling.. but if you can tell me what wireless AP you are using that will help.

Netcfg v2 works - but I do not know how to do this things

Hello,
I just succesfully installed netcfg v2. I can connect to the wireless network using
netcfg2 home
But I do not know how to do the following thins:
It is mentioned in the wiki, but I do not get what exactly I have to do for this.
I have 2 configuration: Home and Uni
- Can the startup script detect which Networks are available and connect to the available one?
- When I connect to the "Uni" configuration, I need to start vpnc afterwards. Can I somehow automate this?
Thanks!
Nathan

netcfg2 can do 'dumb' detection on boot. Set SCAN="on" in both profiles, and put the profiles in your rc.conf NETWORKS=() line.
It'll check if each network is available, then connect if it is.
There's also an autodetect script in the netcfg2 source, look in the contrib dir in the tarball or git.
James

HT201343 My mac is OS X 10.6. has not airplay. how to make it work?

My mac is OS X 10.6. has not airplay. How to make it work?

OS 10.6 is Snow Leopard, which does not support Air Play. If you upgrade to OS 10.7 Mountain Lion (which is what you list in your category) then you may be able to use Air Play depending on the age of your computer.
See this document:
http://support.apple.com/kb/HT5404

Early 2013 Macbook Pro Retina HDMI video to TV but no HDMI device under audio

HDMI output to TV works fine for Video but there is no device to switch to in audio setting, the HDMI cable is tested and working and the TV can recieve audio over HDMI. if the macbook can see that a HDMI cable is plugged in to send video why does it have no option to send audio?

Solved by switching to display mirroring rather than extended screen, no idea why this affects it and only on this TV.

My new TomTom doesn't seem to work with my MacBook Pro (OS version 10.7.2). Is there any way I can make it work?

The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro? Does Apple want to drive us into using PCs or what is going on? Is there a driver or some other clever means of making the TomTom work as they used to work with Macs? This is an urgent question - please help if you can! Thanks. Bill

coxorangepippin wrote:
The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
What that means is that is can't be used with Lion 10.7. PowerPC was the chip Apple used up until 2006 when they switched to Intel. At that point, they created the Rosetta emulator to allow for PPC support for 5 years. They finally dropped the support with the release of Lion. It will only work with OS X 10.6 or earlier. The other option is to purchase a new GPS, which can be had for $100 for a decent one.

HT5556 This doesn't seem to work in Australia. Anyone know how to make it work?

Anyone know how to get the camera redemption feature to work in Australia?

Anyone know how to get the camera redemption feature to work in Australia?

Focus problems, not sure how to make focus work correctly

I have a number of dialog boxes and wizards, and just before I call show I request focus for the component I want to be displayed, but nothing happens. I think the show method it JDialog is setting the focus, and that this is the problem.
I want behavior to work as expected ie.focus to start at top left component and work its way down. Instead it seems to be giving fucos in the order the components were added, or soething like that. Does anyone know if this is indeed the case? I have many widgets which add components in the superclass, so this could cause me problems.
I do not want to create a focus manager, but if worse comes to worse, I will - this is a problem that is unacceptable to the client.
Any suggestions or comments?
btw I am using 1.3.1 and win2k for the OS.

Hi,
addWindowListener(new java.awt.event.WindowAdapter() {
public void windowActivated(java.awt.event.WindowEvent evt) {
formWindowActivated(evt);
protected void formWindowActivated(java.awt.event.WindowEvent evt) {
// Add your handling code here:
getFocusFor(yourFirstComp );
private void getFocusFor(final JComponent comp ){
SwingUtilities.invokeLater(new Runnable() {
          public void run() {
          comp.setRequestFocusEnabled( true );
          comp.requestFocus();
}

New tab is not working properly as before. if i click on new tab symbol(+),it is not opening.how to make it work?

new tab is not working properly.ie.,i can not open new tabs in firefox.

Uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.

I was able to download Lion for free. I checked the App Store and it says Lion was installed. I'm not sure how to make it work, though. Nothing popped up when it was completed, it just says "Installed". How do I get it to work?

I shut down my computer and restarted it, but nothing happened.

Look inthe Applications folder and run Install Mac OS X Lion app.

Macbook pro cannot play videos on facebook, any solutions?

My macbook pro cannot play videos on facebook, but I installed adobe flash and I can see youtube videos and others. My version is OS X 10.8 when I bought it few days ago, and I just upgraded to OS X Mountain Lion.

Hi pardzrose,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Can you please advise what happens when you try play a Video? can you also advise what steps you have taken so far to help resolve this issue?
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How to make buttons work in Interactive Adobe Forms

Hi Experts,
I am new to interactive form. Though i have worked in normal/non-Interactive form, i do not know how to make buttons work in interactive adobe forms using ABAP (I don't know JAVA). Can any one help me out and walk me through to how to code in ABAP to make buttons work.
Kind Regards,
Sharat.

Please refer to my earlier post ... You will get an idea
Please refer to the below thread for detail solution
Sample Interactive form example ?....urgent...
Cheers
Satya

Macbook pro to HDTV, video is working but audio is not working, how to make audio work as well

Similar Messages

Maybe you are looking for