Macbook Pro to IMac connection issue

Hi!
So, I'm trying to display my mid 2010 Macbook Pro to my Feb 2014 IMac. I have a mini displayport to HDMI (female) connected to the macbook and recently bought a cable which is a HDMI (male) to thunderbolt to connect to the IMac. I downloaded OSX to the Macbook because I thought there was a OS conflict and configured the IMac's keyboard so that I can press f2 to target the monitor but it still isn't working. My ultimate goal is to calibrate my IMac monitor. I'm using a i1 profiler which works on the MacBook but doesn't seem to work on the new IMac. I want to pull the software up on the MB, drag it over to the IMac screen, calibrate using a spectraphotometer then email myself that profile to use on the IMac.
Any help would be greatly apprecaited!
thanks!

Hi s,
Try a PRAM Reset: http://docs.info.apple.com/article.html?artnum=2238
Is the adapter certified?

Similar Messages

  • 2008 MacBook Pro with wifi connectivity issues

    Hello all,
    My MacBook Pro has stopped connecting to my wireless internet at my house. Works fine when connected to the Ethernet, but no luck with wireless. My iPad, iPhone, and wife's MacBook Pro have no issues picking up the signal. When I attempted the network diagnostics, the wifi will not turn on. The button that enables you to TURN ON WIFI does not respond. I made a trip to the local apple store where they reset the wireless and it worked fine in the store. Took it home and same problem still existed.   Diagnostic report at the apple store showed no problems with wireless card.
    Any thoughts, comments, or wisdom would be appreciated!

    Apple released a firmware update for your MBP model to enable it to charge properly with the new-style adapters, after failures to do so were widely reported. Here's an article about the problem:
    http://support.apple.com/kb/TS3499
    And here's a link to the update:
    http://support.apple.com/kb/DL1311
    As with all firmware updates, it's essential to follow the installation instructions to the letter.

  • Jaybird headphones and Macbook Pro Retina bluetooth connectivity issues

    I recently purchased the Jaybird Bluebuds X Premium headphones and for awhile it would connect to my new Macbook Pro Retina 15'' via bluetooth, but now it doesn't anymore. The headphones connect just fine to my phone (iPhone 4S), and other Macbook Pros (not retina), but they do not connect to other Macbook Pro Retinas. I was wondering if this was a connectivity issue with Macbook Pro Retinas and if so how can I get around it to connect the headphones again?
    Thanks

    Hey there LongHorn16,
    It sounds like your Bluetooth headphones aren't working with this one computer, but there is no issue with other devices that you have. I would start with these 2 steps from the following article:
    Restart your computer
    Sometimes a simple restart of your Mac is all it takes to get things running smoothly again. You may also want to try resetting your computer's PRAM and NVRAM.
    Reset your Bluetooth device
    Try turning your device off and then on again. If that doesn't resolve the issue, see if you can reset your device—refer to the documentation that came with your device for instructions.
    Bluetooth Quick Assist
    http://support.apple.com/kb/HT1153
    If it still doesn't work, then I would next use this article to remove the device:
    Bluetooth: How to Delete a Paired Device
    http://support.apple.com/kb/TA27116
    Then restart your computer and pair it again:
    OS X Lion: Set up a Bluetooth device
    http://support.apple.com/kb/PH3647
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • AE ppoe mode in AE only allows macbook pro and iMac to connect to internet but not ipad

    I just upgraded to  20MB DSL line and got a new Qwest Q1000 modem connected to an A Extreme.
    Since Qwest now has PPPoE, I set the Q1000 modem to bridge mode and turned off Wifi.
    Then I Set the AEx router to ppoe mode, entered my username and password from Qwest and all is well with all lights green.
    But... only my imac and macbook pro connect to the internet.  My ipad, my wife's macbook and an ipod touch cannot connect.
    According the Airport Utility, all these devices are detected by the wifi network and they have their own  unique IPs provided by the AEx router (in pppoe mode)   10.0.1.7,   10.0.1.9 and so forth, no ip conflicts detected, all the lights green with full access to the internet. Again, only  my iMac and my macbook pro actually connect to the internet at full speed.
    Does any one know why some devices connect to the internet while others are not able to...
    Again, no errors detected anywhere, all modem and router lights green.
    Any help is welcomed.
    Janickk

    Thanks for the reply.  Your suggestion did not work.  Apparently there is an issue with DNS addresses.
    The Airport Extreme in pppoe mode  sets the router and DNS addresses to be the same 10.0.1.1.  Some devices (like my macbook pro and iMac) ignore this DNS value or use a different  (unknown) and then they connect to the internet perfectly.  But the devices (ipads and ipods) aquire and set both values (Router and DNS) to be the same, (10.0.1.1 and 10,0.1.1) wont connect to the internet until I manually  changed the DNS address in the DNS field.
    Question: are these two values supposed to be the same/different/ in both fields in the AExt in pppoe mode?
    Thanks
    Janickk

  • Both my iMac and macbook pro will not connect to a certain web site?

    Both my macs (21" new iMac & a 2008 macbook pro) will not connect to foxcycling.co.uk. I know the site is live as I can access on my iphone and ipad.
    From what I've read on the forums its a settings issue which probably migrated from the macbook to the iMac when I migrated the data.
    Very frustrating ....
    Any idea's and simple solutions?
    Both systems up to date etc

    OK, OS X does not include Adobe Flash. The website is probably Flash based. Chrome has Flash incorporated into it. If you want to download and install Flash visit Adobe's website and download Flash for your system.

  • File sharing permissions issue between Macbook Pro and iMac

    Hi,
    I'm having trouble sharing files to and from a Macbook Pro and iMac. Both are brand new, and connected via a firewire cable (Due to large file sizes)
    I can share files between both computers no problem, but the files are set to 'Read only' by default once moved to the over device and can't be moved or renamed without requiring a password every single time.
    Is there a way to totally share files without having to enter a password every time I want to move or rename it?
    > File sharing is turned ON on both computers.
    > Share files and folders using AFP is ticked
    > Share files and folders using SMB is ticked also.
    Thanks

    Try disabling SMB File Sharing, & in the Sharing Pref Panes>Sharing>Options, see what users are listed.
    Also, try logging into the other Mac with the Other Mac's username & PW, not using the name & PW of the one you're on.

  • Trying to connect Macbook Pro and IMac...suggestions?

    Trying to connect Macbook Pro and IMac with Apple Remote desktop or a cable.  They do share a wifi router.
    Thanks much!

    not sure if you found an answer to this.  I just got a mb pro and want it to connect to my imac (late 2009).  I set up sharing on hte imac, file sharing and dvd/cd sharing.  from the mbpro i simply went to finder>go>connect to server.  I entered the name as on my imac (xxx.local) and immediately connected.  This was a massive help to me as I had some software (aperture, office for mac) that were on drive and the new mbpro doesn't have a disk drive.  through sharing I could access the disc drive remotely via my mbpro and load the software that way.  worked beautifully on my wifi (which is apple airport extreme). 
    Hope this helps.

  • MacBook Pro and iMac keep losing wireless internet connection.

    Greetings all, two weeks ago I purchashed a MacBook Pro and iMac and they've worked fine, except for the internet. The wireless randomly goes out, but the airport bars remain. At first I thought it was just pages having trouble loading because of the OS (stupid I know) It's been happening more and more frequently and the only way to solve it is to turn the Airport off and then on which allows the internet to reconnect. My wireless router is connected to an HP an the router is a Dlink 1310 wireless G router. Any help would be greatly appreciated.

    Hi all,
    It seems I am not alone. There is a very strange problem either with my brand new unibody MacBookPro 17" or the Airport Extreme I am using to connect to the Internet via a cable connected router. The router I am using is Billion 7300 and works fine, and I can even connect to the wireless access via the router and all works fine. I am using Airport Extreme to extend the access area in my house and also use a USB drive for storage attached to the AirportExtreme. The funny thing is that the first couple of weeks I had no problems with the MacBookPro going on the Internet via the Airport. At that time I had the wireless part of the Billion modem disabled so as to avoid possible interference. Suddenly, one day about a week or so ago, the MBP would connect first time to the wireless Airport and to the Internet for only about a few seconds and then no update on any of the web pages. I was suspecting first my ADSL, but that was all along OK. The signal strength to the Airport is strong, but just the connection to the Internet is no longer available. Strange thing is I have in the same room a 24" iMac and this is still connected to the Internet via the Airport with no problems. Same settings on both! I tried everything I could think off on the Airport, tweaked, changed, reset and created new connection - but without any luck. It is as if the Airport decided to just block the MBP for whatever reason. I also have the Little Snitch, which I disabled too.
    I was hoping that the latest Leopard 10.5.7 would have a fix for such a behaviour, but no change.
    I cannot make any conclusion as everything contradicts: if the MBP wireless has a problem, I wouldn't be able to connect to the Billion wireless; if the Airport is at fault I should not be able to connect to it with the iMac. I go to work where other two brands of wireless hot-spots I use (D-Link and Billion 7402) and I have no problems swicthing between the two. It seems only Apple's Airport is a problem for my new MBP.
    It must be something in the software of the Airport or MBP ?!?!?
    APPLE, PLEASE HELP, THIS IS ANNOYING.
    I already spent three days trying to solve a problem that should be 'No Brainer" according to the Apple's design books. But I do have a problem that I did not know about before.
    Thank you in advance for any suggestions.
    Vlado Damjanovski, Sydney.

  • MacBook Pro and  iMAC Software update

    I need some help from my Apple Junkies.... So both my MacBook Pro and my iMAC are showing that there is new software that needs to updated which are apart of the OS X 10.9.4 update combo, take it my computer is updated to 10.9.4 but in the app update section it shows I need yo update the iTunes  11.4, iBook 1.0.1 and Safari 7.0.6... Now when you look at the bottom of the updates at the "Updates installed in the last 30 days" all of the above are updated.
    But the issues are: I can't get rid of that red 1 for updates (yes I've tried putting the time into the future 6 months and longer no help) and
    I'm trying to restore my iPad and Apple TV which neither MacBook Pro or iMac are allowing it because it is saying unable to connect to network which clearly I'm connected to the internet... I'm using Verizon for home internet as well.
    - I've tried installing the above individually but it keeps saying calculating yet no movement left it up for over 24 hours with numerous reboots... about ready to throw both out the window..

    My guess is Google did something wrong, figured it out and fixed it. The suggestions feature went away in Safari for Google, but not for bing, and continued to work in Firefox. It is all fixed this morning. I happened to be using Google when it stopped functioning, it had nothing to do with updates to the Mac, since as it went south I restarted in an earlier Snow Leopard version and discovered it was not working there either. So it was a Google action that caused the mishap, nothing that Apple did. Anyway, all's well now.
    Francine

  • Can I use Mac Mini as a "server" for a MacBook Pro and iMac?

    I want to develop a simple system for accessing my files from multiple devices.
    I heavily use iTunes (190 GB), iPhoto (120 GB) and iMovie (30 GB, but want to do more when I get time).  Additionally, I store lots of old videos on circa 10 portable hard drives (1 TB each), which I access occasionally. 
    The family use all this content and we currently have a MacBook Pro and are considering buying a new computer - either a new MacBook Pro or an iMac. We also have iPads, iPhones etc and a Time Capsule. We use wireless fibre optic broadband.
    I don't really want multiple iTunes and iPhoto libraries.  We want all our music and pictures in single master libraries that we can all access and update.
    As there is seemingly too much data to store on iCloud, we need to find an alternative solution. 
    My possible solution is:
    (1) Load my master iTunes, iPhoto and iMovie libraries ("iTPM libs") on a Mac mini
    (2) Buy a new MacBook Pro or iMac (probably doesnt matter which)
    (3) Link the MacBook Pro(s) and iMac to the Mac mini to access iTunes, iPhoto and iMovie and the master iTPM libs
    (4) Plug the portable hard drives into the Mac mini whenever I need to access the video content stored on the portable hard drives
    (5) Add "users" to the system (i.e. family members), in the same way you would access a shared server at work
    (6) Over time, buy more computers to access the system in the same way
    My questions are:
    (1) Is this system feasible?
    (2) If so, can I edit the iTPM libs from the MacBook Pro or iMac?
    (3) If so, what happens if both the MacBook Pro and iMac are accessing the libraries at the same time? Which takes precedent?
    (4) Would this solution be significantly slower than having separate libraries on the different computers?
    (5) Is there an alternative approach that might work better for my needs? (which are, after all, relatively straight forward).  When I went to the Apple store they were unsure!
    Many thanks.

    I heavily use iTunes (190 GB), iPhoto (120 GB) and iMovie (30 GB, but want to do more when I get time).  Additionally, I store lots of old videos on circa 10 portable hard drives (1 TB each), which I access occasionally.
    The family use all this content and we currently have a MacBook Pro and are considering buying a new computer - either a new MacBook Pro or an iMac. We also have iPads, iPhones etc and a Time Capsule.
    […] We want all our music and pictures in single master libraries that we can all access and update.
    The "update" portion of this is where your problems will arise.  You'd be better to consider your proposed system initially in terms of content "consumption", before getting into the nitty-gritty of editing shared content.
    iTunes has the Home Sharing feature built-in, which solves the content consumption issue.
    I don't know anything about sharing iPhoto libraries, but this KB article looks useful.
    As for iMovie, I think there are two things you want to do: share the raw data (sound effects, music, photos etc.) that are used to create iMovie content; and share the finished results.  Is that right?  I'm not sure how you'd go about doing that, but if you clarify your aims in this regard, it'll help the next person who comes along.
    When it comes to updating content, such as adding new music to iTunes or iPhoto, I'd suggest you do it through the Mac mini directly.  This seems the least problematic solution.  You wouldn't necessarily need a dedicated display for the Mac mini - you could use remote desktop or VNC or what-have-you.
    As for speed: doing anything across a network is always going to be slower than doing it locally.  But, it probably won't matter for content consumption (though if you're all watching different movies at the same time the drives on the server may struggle, and the wifi bandwidth might be tight).
    I hope this represents a good initial response to your query.

  • My Macbook Pro will not connect to the internet or bring up Safari!

    For the past couple of weeks my Macbook Pro has been having issues connecting to the internet and when it is connected it won't bring up Safari "You are not connected to the internet"
    I use the correct password for my wireless internet and it still won't connect. I deleted the airport in system preferences and then made a new one. It connected for a few minutes but then disconnected and just shows an explanation point over the airport sign at the top of my status bar.
    PLEASE HELP ME.
    I run a business and not having access to the internet on my Macbook is very very stressful.
    I brought the Macbook into the Apple store but of course it works perfectly when I bring it in there... HELP

    I also just realized it's also saying under the Airport status in System Preferences that the "AirPort has the self-assigned IP address ###.###.##.### and will not be able to connect to the internet."

  • My MacBook Pro won't connect to the Internet, but my phone and PC will.

    My MacBook Pro won't connect to the Internet. My iPhone has no problem doing so, and neither does my PC. I think it's something to do with my DNS, but I'm not sure. My network connections say that both my Ethernet or FireWire are failed. What's wrong with my MacBook? Is there a simple way to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router

    My MacBook Pro won't connect to the Internet via wifi but it worked fine on ethernet cord...I tried running diagnostic but it didn't work:((((  it happen every time if I restart the modem and/or router.. Any idea how to fix this?

    Hello Rattisate,
    Sorry to hear you are not able to connect to Wi-Fi on your MacBook Pro.  I would be concerned about this too.  You can find information on how to troubleshoot this in the following article:
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Follow the steps in the section labeled, "Symptom: My Mac does not connect to the Internet."
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • How to sync a macbook pro w/ imac

    how to sync a macbook pro w/ imac.  Wanting to be able to have all my files from the imac on the macbook pro.
    cheer's
    ozzibo

    If you mean copy files from one to the other you can connect the two via firewire cable and boot one into Target Disk Mode.

  • TS4088 I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase o

    I have a MacBook pro that has power issues and will not start but the hardrive is fine.  I do not want to lose all of my files so I was wondering if it's possible to transfer my hardrive from a older Macbook pro to a new one if I were to purchase a new one?  Also, the software is not updated as the computer hasn't worked for about 2 months. 
    Also, if it is possible to transfer the hardrive, would my iTunes music transfer as well?  It is not saved in the cloud.
    Thanks for your help, it is much appreciated.

    You computer is probably perfectly repairable, but if you want a new one anyway, it is perfectly possible to transfer the data from the faulty one.
    But it would be a mistake to simply put the old HD in the new computer.
    These are the steps:
    Remove Hard drive from faulty computer. (very easy on Unibody MBPs, do-able but not so easy on older MBPs)
    Put it in a cheap enclosure
    Connect it the new computer
    Boot up new computer.
    If the new computer has never been run before the Setup Assistant will ask if you want to import your apps, data, settings etc from either another mac, another HD connected to the Mac or a Time Machine back up.
    Obviously chose the second option (another HD connected to this Mac) and follow prompts.
    If the new computer has already been run (so Setup Assistant doesn't run when you boot it up), you will need to use Migration Assistant...or run the installer again so that Setup Assistant runs again.
    Message was edited by: Mike Boreham...added sec on line

Maybe you are looking for