MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolv
MacBook Pro turns on but will not load. Battery will power up and charge. The PRAM second start up seems to work, but the Apple timer continues add-infinitum. There is also a disc in the laptop so I can't load re-load software OS 10.6.1. How do I resolve this problem?
Try booting in Safe Mode by holding your Shift key down when booting. Also, try holding the eject key down when booting to eject the DVD. If you plug a mouse in and hold the clicker down when booting, that should eject the DVD.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
Similar Messages
-
I can't read acsm files on my e-reader after transferring them from the pc with ADE. it seems to work, but then when I try to open the files on the e-reader it says "open failure". what's wrong?
The acsm file is not the book, it is a ticket to get the book. I sometimes get library books online, here is what I do.
1. Start ADE on the computer
2. Go to library website and find the book I want to download.
3. Click on the download link
4. In windows 7 a box opens asking whether I want to open( or run) or save the acsm file
5. Click open/run and ADE downloads the book into the "Library"
6. Transfer the book (epub file) to the reader. -
I have a new iPhone 4s. I have a home wi-fi network using Cisco Linksys2000 router with all settings per this article - phone will not see network if set to 5 GHz channel width - solution?? 2.4 works but is not optimal with other devices in home (computers; tivo). Have others seen this? Any advice is much appreciated.
Stephen Spark is right - your best alternative is to use a simultaneous dual band wireless router like the AirPort Extreme. Your Cisco Linksys2000 is not a dual band router, meaning that it will be constrained to operate at the slowest speed of all the devices on your network.
The AirPort Extreme's dual networks will support all your 802.11n devices as well as all your 802.11b/g devices on both the 2.4 and 5 GHz frequencies simultaneously. -
Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigger issue or does a battery need to be in the compartment to boot up? Appreciate any help. Thanks.
Working battery needs to be in for the computer to function.
-
My iPhone 6 just went funny. It will not show the batter percentage anymore and the alerts are coming through vibrating even when I have switched them off. Please help! :-(
To turn battery percentage back on: Settings>General>Usage>Battery Percentage --switch on.
-
Is my question out there?
It seems the longer I have Aperture open more and more images become unavailable. There's a dotted line around a blank thumbnail and clicking it may result in prolonged static "loading" symbol and ultimately, if anything else, a message that the file type (which is .jpg, nothing exotic) is not supported. These images are on an external iomega terabyte hard drive. It gets worse. If I go straight to the iomega drive where the images are all listed, selecting one brings up a symbol instead of a thumbnail and double-clicking brings the message that I "do not have permission" to open this file.No, that shouldn't have mattered necessarily ss long as you moved the folders into the correct spots.
You could start over by throwing all the folders you just moved in back out (could park them in a folder on your desktop). Then, if you want to start over completely, and - important - have the following file on your external - go to Users -> Library -> Preferences: com.apple.Mail.plist. This file contains all your account settings.
Copy that file over to your new Mac.
Throw out that same file on your new Mac (Mail will now think it has never been launched before).
Move the old .plist file into the same spot.
Move your Mail folders into place (and replace any newer folders there, so you will have exactly the same folder setup as you did in the old one).
Launch Mail (keep fingers crossed - it should work!) -
Macbook pro turns off when i unpliug
macbook pro turns off when i unpliug
You either need to plug in your charger and if that isn't working if your machine is less than a year old take it in to your nearst Apple Store and let them deal with it. Or if you are out of warrantee you will need to get a new battery for your Mac
Cheers
Don -
My IPhoto library will not sync all my photo's and videos to my IPhone 4
My IPhoto library will not sync all my photo's and videos to my IPhone 4. It comes up well short every time. After syncing, I get a message, "example 1171 photo's could not be synced, please see Itunes for help". I have lots of space/gb on my Iphone, so I'm confused. I've done a factory reset and done all the usual stuff, but to no avail. My Iphone is a 32gb IPhone 4, my IMAC is OS10.6.8 and my IPhoto is IPhoto 08. I appologise in advance if i'm posting in the wrong place, so please no nasty trolls. I just need good, honest, kindly advice and a solution to this. I use my IPhone as a further external backup for my photo's
Kindest regards
PaulGo to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD -
my macbook pro is frozen, the mouse moves, but it will not click. I have restarted and it is still the same... Can anyone help me ?
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
My MACBOOK Pro turned out to be Snow Leopard, and later upgraded toLION. And update the EFI, I would like to replace the Snow Leopard, EFIcan not boot, how do? How to use the Snow Leopard install disk to reduce EFI?
Do you mean some of your software does not work in Lion? Do you want to return to using Snow Leopard? If so, then do this:
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
to
We had a MacBook Pro stolen from our home when we were out of town and I am pretty sure we never activated the LoJack type of function on it not sure if its called lojack but you get what I am saying is there any way we can activate such hardware/app now so we can possibly recover our laptop? Any one who can point us in the right direction that would be great and we would be very grateful. Thanks So MuchLojack for laptops - if that is the product you purchased and installed, you will need to read the user manual or contact the manufacturer as it is 3rd party. You did file a police report right?
-
My MacBook Pro turns on but not all the way, it gives me an icon of a grey folder with a question mark in the middle, and won't go further that that. Anyone knows why, or what's the problem?
If these do not resolve the issue or if you are not comfortable with proceeding through these steps then take your Mac to an Apple store or an Apple Authorized Service Provider. An Apple store will perform these initial steps, diagnose the problem, and give an estimate for repairs (if needed). If the Mac is less than one year old or is covered by AppleCare any repairs would be free.
Genius reservation http://www.apple.com/retail/geniusbar/ .
or find an Apple Authorized Service Provider https://locate.apple.com/country -
I just created a new profile/user on my MacBook Pro. My pointer/mouse on my trackpad. It works fine in my older user profile, but when I go to the new profile my mac will not respond to clicks. The Mouse moves but will not click. Already tried restarting and the pram zap. The problem starts when I log out of my main profile. I get to the login screen and my laptop stops responding to clicks. When I manage to make my way back to my main profile the mouse works perfectly. Should I just delete the new profile and try again?
If the modem is also a router, either use the modem in bridge and run pppoe client on the TC.. that is assuming ADSL or similar eg vdsl. If it is cable service.. and the modem is a router, then bridge the TC.. go to internet page and select connect by ethernet and below that set connection sharing to bridge.
Please tell us more about the modem if the above gives you issues. -
I have a Macbook Pro. I updated to 10.9.4 an downloaded the trial for Creative Cloud. It downloaded and installed but will not open. I shut down and tried reinstalling. Same problem.
Thanks.I stumbled upon the solution. In addition to downloading Creative Cloud, I needed to go back to the website and download trials for the programs I want to use--Photoshop and Lightroom. Once I did that, I was in business. Would save trouble if that was made clear on the download site.
Thanks -
I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?
Is the TV set to take input from the HDMI connection?
On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection. Try clicking Detect Displays just to see if the computer can now sense the presence of the connection. Check your connections.
If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image. Set the proper resolution (probably 720p, 1080i, or 1080p). Set the refresh rate (probably 60Hz) if that preference is shown. You should see a picture at this point. I recommend turning off mirrored displays if it is enabled.
Maybe you are looking for
-
My itunes is making me crazy. I have updated to IOS 6 on my phone from my friends computer. Then I had to also restore it. I tried re connecting to my computer but the itunes just says that it is not compatable. I tried turning the phone on and off.
-
How to allow, user to enter the free text in smart forms and Drop Down list
Hi Experts, How to provide the user to enter text in smart forms? ie Once the smartform generated, there the user allowed to enter text. And also is there any option to provide Dropdown list in smart forms. Possible give with example with clear idea
-
Sender File Adapter pulling Incomplete File - Throwing Alert with MSecsWait
Hi, <br>We have sender File communication channel which is polling every 600 Secs. The directory where the files are available is basically an FTP Server directory. Vendors are putting file in this directory and PI is picking up from there. <br> Some
-
Apple mail formatting Question
I just bought a MBAir and in using Apple mail I cannot seem to format email replies to contain an extra two lines of blank space above the original email. Is there a way to format email replies to do this automatically?
-
Just got new smart tv and keeps freezing when I go to the home page? The only way to get it out of the home page is to unplug the tv. It will work until you go into the home page 2-3 times and it will freeze up on the home screen. Any suggestions?