MacBook Pro (Unibody) with Sony XDCAM EX-3 SxS card does not work !

Having bought my 2nd MacBook Pro now with intel chips etc. I was horrified to discover that when I downloaded the XDCAM EX : SxS PRO Device Driver (Mac V1.0.1807) it screwed up the MacBook Pro by taking 10-15mins to get to the desk top. I called a friend who bought the last version of MacBook Pro and it works fine. So where do I go from here.

I just got off the phone with Sony Tech Support and here's what I found out.
-yes they are absolutely aware of the problem (yay!)
-there are conflicts with the SxS driver and the new trackpad driver (hence the loss of some multi-finger gestures and general system sluggishness)
- they're writing a new version now. beta should be next week. then a 1.1 release "2-3 weeks from there"
-the new drivers should be announced on the website sony.com/xdcam under the software section
when I had the driver installed, it did allow me to view the clips on an inserted card. so basically we just need to bear with this for a little while so Sony can fix things. The guy on the phone was incredibly helpful and obviously knew what he was talking about, couldn't thank him enough.

Similar Messages

Installed Adobe Photoshop CS6 on MacBook Pro OS 10.7.5, now my DVD player does not work. Ideas?

I installed Adobe Photoshop CS6 on MacBook Pro, OS 10.7.5. Now my DVD player will not work. Any ideas?

Problem solved. Yes, it was a coincidence. The problem had to do with my DVD preferences, not the Adobe installation. Thanks for your reply.

My 06' Macbook Pro crashed with vertical, green pixelated lines and now will not advance past the turn-on screen with the apple filled with green lines as well. Then, it says to hold down the power button to restart. Help?

My 06' Macbook Pro crashed with vertical, green pixelated lines and now will not advance past the turn-on screen with the apple filled with green lines as well. Then, it says to hold down the power button to restart. I have tried several times to get it past this point but tnothing helped.
I have an appointment at the Apple store today, but was wondering : will all of the information and files on my desktop be lost? Or is this a logic board problem?
Any help is much MUCH appricated.

I'm not sure, if you're out of warrenty it'll cost quite a bit for the replacement of the logic board replacement...unless you have apple care. you could ask apple to try and recover your hard drive but i'm not sure.

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card)

I have a late 2008 Macbook Pro, I am trying to run MW3 but it will not work without crashing a few minuets into the game. The general specs on my computer are a dual processor 2.53 ghz. 4 gb ram and a NVIDIA geforce 9400 (9600 is the alternate card).
Things to note:
I have been unable to update firmware on this computer for about a year now. Im not sure why.
I am running a bootleg copy of Windows XP on this computer, I would not like to spend $149 to get Windows 7 if possible.
any thoughts on the matter would be greatly appreciated, thank you.

Why don't you take your 'old' MBP into your local Apple Store and have them check out everything that's wrong with it - and I mean everything? Then, when you get an estimate about how much it would cost to get the machine completely repaired, ask about the Apple flat-rate repair pricing?
It's worth a shot - and with what you may save, you can put in the bank for a new MBP.
Clinton

I have a macbook pro the fan wont stop running the keyboard light is not working and the it wont charge all happened all of a sudden what to do please.

have a macbook pro the fan wont stop running the keyboard light is not working and the it wont charge all happened all of a sudden what to do please.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, you may have to take the MBP to the Apple Store to have it checked.
Best

HT3625 I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running mountain Lion 10.8.2

I have a 2012 macBook Pro 13" and the option "Use audio port for" does not appear at all in the sound menu. why is this? im running mountain Lion 10.8.2

Because line-in has been removed.
It does allow for an Apple headset with mic., but I don't know if it would work with third-party ones.
You'll need to use a Griffin iMic or similar to use line-in via a USB port.
The same goes for the 15" retina, the newest MBA and the new iMac (whenever it finally arrives).

I just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear

i just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear. Please advice how to downgrade to the previous OS

Please try going to your settings area of your display. Click on General and go to 'reset all settings'
Good luck!

I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.

I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.

Check for updates by running MS Office Update directly from:
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
(Open Finder, ⇧⌘G, paste in the above and click)

I have PCI-4452-this card does not work with XP. Are there fixs available?

I have the PCI-4452, i fould that when i installed XP on my system, the card does not work. Does this card have any drivers for ir to work on XP. Or do i have to stay on NT.

Hello,
This card is actually supported under XP for use with drivers since 6.9.2 and above (only traditional driver).
Kind Regards
Steven Bird
Applications Engineer
National Instruments

HT4946 I backed up and encrypted with password but on restore the password does not work. Advice

I backed up and encrypted with password but on restore the password does not work. Advice

After a HD failure on my 2009 iMac,, fittgyed new oner, installedf os (tiger), from original disk, restored all documents etc. changed password with disk utility. over 48 hrs re3setting permissions so switched off. all seemed ok. downloaded combined os updates. Now my password does not work. tried rersetting, no go. Terminal does not have rest password on.
Any suggestions please

I updated my browser to the last versoin of firefox (31). But I have a problem with mozilla. why tha toolbar of alexa does not work on it?

Hello...
I updated my browser to the last versoin of firefox (31). But I have a problem with mozilla. why tha toolbar of alexa does not work on it?

After a quick search in the addon.mozilla.org page, it looks like that add on is still compatible with version 31. Please try to [[Re-enable add-ons that were disabled when updating Firefox]] or make a back up of the add on folder in the profile folder and reinstall the add on. [[Back up and restore information in Firefox profiles]]

Macbook Pro Retina - nVidia card does not work correctly

Hi,
having a MacBook Pro Retina. It ran fine till yeasterday when I fired up a game which was laggy and it was running fine before. It took me several hours to find where the problem is and it seems to me that the nVidia dicrete card is not working. But strangely not working. I installed gfxCardStatus to see whether the card is being switched to run the game and it actually is. But the performance is the same as running it on an internal Intel. I took another test and downloaded CINEBENCH to see the differences and sadly the results are the same if I switch to nVidia or to Intel and run the benchmark.
Obviously something is not right here. It happened over night. Before it worked corectly. I do not remember installing something that day/night that could have broken it (in case it is a SW problem). Only one thing comes to my mind - Apple Java update. But I tried to uninstall it and got the same result. I did try to restart several times. But otherwise there is no visible flaw, e.g. flickering or black screen when swithech do nVidia - nothing. gfxCardStatus shows that the system switches the card and I notice no change. Only in heavy load it is obvious that it is slow (slower than it was).
Is there a way to see if the nVidia card is working? I suspect that even if the system is trying to switch to a discreet card it still runs on the Intel in reality. Any way how to distinguish this rather than to rely on gfxCardStatus? Any log that would make this clear? Any test I can run (Apple HW test shows "no problem detected")?
Many thanks for hints.

To show what I am talkin about I did another test. I downloaded and ran LuxMark. There it is possible to test CPU and GPU separately on a same benchmark scene. FIrst I let the system switch to nvidia and did the test:
Then I manually switched to Intel/CPU in gfxCardStatus and also selected CPU in the LuxMark and did the same test. The result is:
You see? How it is possible that in OpenCL computation CPU with internal graphic card is even faster then the descreet one? This is what I am experiencing now and cannot figure out where the problem lies.
Would the Apple HW test discover a dead nvidia card? Because nothing shows that the card is dead but as you can see it is not performing as it should.

Scandisk Extreme Pro class 10 Cd card does not work in reader

My SD card will not work in reader after I took pictures with my 60D and tried to transfer to MacBook Pro. I tiook the card to best buy and it worked in all IMacs and MacBook Air but none of the Macbook Pros. I read a couple of blogs and they said its the i7 processors that are having the problem. i don't know what the processors were at the store but I do know they weren't working. Does anyone know of a fix for this?
MacBook Pro
MacBookPro8,1
Intel Core i7
2.7 GHz
8 GB

solo22 wrote:
My SD card will not work in reader after I took pictures with my 60D and tried to transfer to MacBook Pro. I tiook the card to best buy and it worked in all IMacs and MacBook Air but none of the Macbook Pros. I read a couple of blogs and they said its the i7 processors that are having the problem. i don't know what the processors were at the store but I do know they weren't working. Does anyone know of a fix for this?
MacBook Pro
MacBookPro8,1
Intel Core i7
2.7 GHz
8 GB
I am unable to read the class 10 cards in my i5 quad core 15" MBP, as well. There are reported fixes, including resetting the System Management Controller (SMC) (see the details by following this link => http://support.apple.com/kb/HT3964)... but so far, nothing I have found/tried will work with the class 10 cards, regardless of the SD card's storage capacity.
EDIT TO ADD: My cards are Sandisk Extreme class 10, 16GB SDHC cards. I don't have the Extreme Pro version of the card. My personal experience leads me to believe the issue is related to the SPEED of the card and NOT THE SIZE.

Satellite Pro A200 Windows XP, 4Gb SDHC Card does not work.

Hi,
I have had a Satellite Pro A200 installed with Windows XP, SP2 for some time - No problems there, a great piece of kit. However I recently have bought a new camera and splashed out on a Kingston 4Gb SDHC card. The manual for my A200 seemes to indicate that it my laptop is compatible with SDHC cards to 4Gb however when I push the card in the LED flashes blue briefly and then nothing happens. My SDHC card does not appear to be recognised by the system.
I see no errors in my OS event log and I have checked the slots operation by trying an older 512Mb SD card and that works fine.
Can anybody offer any help please?
For reference this laptop is a Model PSAE4E A200.
Many Thanks in advance
Simon

If the above fix does not work (which it didn't for me on a Satellite Pro A100 running XP), try
[http://support.microsoft.com/kb/923293] .
That one did the trick

Help with util.zip up files... does not work

I am writing a program so my mum can zip up new photos she takes and then send them to me. The program creates a html file for the webpage plus a smaller version of her original photo and places them all in a 1 folder with a new name. Al this part works... I want to afterwards place my files in a zipped up folder that she can e-mail me with her normal client. How... I picked up this code on the net and have changed it to incoporate my parameters. The files which are created ..paths are (String in an String[]) I then send to my zipping method.
The zip file is created but does not work when I try to extract from it ??? I also know that the String [] works becuse I have made a loop to check its properties at each index.
what am I doing wrong?
This is a modified code I found on the internet but with no author??
import java.io.File;
import java.io.FileInputStream;
import java.io.FileOutputStream;
import java.io.IOException;
import java.util.zip.ZipEntry;
import java.util.zip.*;
public class Test{
    private File zipDir;
    private String[] filename;
    public Test(String[] recivedFilename){
        filename = recivedFilename;
        try {
            ZipOutputStream zos = new
                    ZipOutputStream(new FileOutputStream("c:\\curDir.zip"));
            from,
            zipDir("c:\\batviapictures\\", zos);
            zos.close();
        } catch(Exception e) {
            //handle exception
    public void zipDir(String dir2zip, ZipOutputStream zos) {
        try {File
            zipDir = new File(dir2zip);
            String[] dirList = filename;
            byte[] readBuffer = new byte[2156];
            int bytesIn = 0;
            //loop through dirList, and zip the files
            for(int i=0; i<dirList.length; i++) {
                File f = new File(zipDir, dirList);
if(f.isDirectory()) {
String filePath = f.getPath();
zipDir(filePath, zos);
continue;
FileInputStream fis = new FileInputStream(f);
ZipEntry anEntry = new ZipEntry(f.getPath());
zos.putNextEntry(anEntry);
while((bytesIn = fis.read(readBuffer)) != -1) {
zos.write(readBuffer, 0, bytesIn);
fis.close();
catch(Exception e) {

I make no guarantees that this will completely solve all your problems, but I just know these calls are needed but missing from your OP:
try {
    ZipOutputStream zos = new
                    ZipOutputStream(new FileOutputStream("c:\\curDir.zip"));
                    from,
                    zipDir("c:\\batviapictures\\", zos);
    zos.flush(); // ADD THIS after all files have been written to the zos
    zos.close();
} catch(Exception e) {
    //handle exception
}And
while((bytesIn = fis.read(readBuffer)) != -1) {
    zos.write(readBuffer, 0, bytesIn);
zos.closeEntry(); // ADD THIS after each file is written to the zos
fis.close();

MacBook Pro (Unibody) with Sony XDCAM EX-3 SxS card does not work !

Similar Messages

Maybe you are looking for