MacBook Pro won't sleep when charging

My 15" i5 MacBook Pro won't sleep when charging; a reboot of the machine solves the problem temporarily, but it always recurs. When I close the lid and listen carefully, I can hear hard drive activity; the drive sounds like it keeps spinning up every 10 seconds or so.
This is not an issue when trying to sleep when running on the battery only. Any advice?

I don't have launch2net installed.
I'm not sure how this will help, but here's the last 5 lines from Console:
11-07-13 5:19:46 PM          Butler[156]          cache: adding applications...
11-07-13 5:19:46 PM          Butler[156]          cache: adding addresses...
11-07-13 5:19:47 PM          Butler[156]          cache: categorizing...
11-07-13 5:19:49 PM          Butler[156]          updated abbreviations cache (enabled)
11-07-13 5:19:58 PM          SIMBL Agent[133]          warning: failed to get scripting definition from /Applications/Utilities/Console.app; it may not be scriptable.

Similar Messages

Why does my macbook pro "goes to sleep" when charging?

Why does my macbook pro "goes to sleep" when charging? It is working fine without charging but once I attach the charger to my laptop, it just blacks out or goes to sleep mode and I can't wake it up unless I unpluck the charger.
I read from threads that it is a logic board problem....How do I solve this problem?

Try an SMC reset. Follow the method for "a battery you should not remove yourself."
http://support.apple.com/kb/ht3964

MacBook Pro won't sleep when lid is closed and battery lights won't work?

I have a 2010 MacBook Pro 15" and ever since I got it, the battery indicator lights wouldn't light up (not that big of a deal) and the computer wouldn't sleep when I closed the lid.
I've reset the NVRAM/PRAM, the SMC and verified/repaired my hard disk as needed. But the computer still won't sleep when I close the lid (regardless if the machine is plugged into a charger or not). Is there a known fix for this problem? I've been searching through the forums and troubleshooting from advice that other people have suggested, but nothing seems to be working. Any help is greatly appreciated!

This exact thing happened to me. Resetting the SMC solved all my problems. Here's a link to how to do it: Intel-based Macs: Resetting the System Management Controller (SMC) Hope it works!

Macbook Pro won't sleep when lid shuts or hit sleep

Hey Everyone,
So after the latest update my Macbook pro no longer immediately sleeps after shutting the lid. It also won't sleep when 'sleep' is hit in the apple menu. It's actually really annoying as I need it for security.
Does anyone know how to fix this problem?

Try Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Macbook Pro won't sleep when lid open

My 2011 Macbook Pro won't go to sleep if I leave the lid open. I have checked System Preferences>Energy Saver and the display/computer sleep is set to 10 min for both Battery and Power Adapter settings. Even if I close all the applications down, my computer will still not go to sleep. The battery just gets completely drained if I forget to close the lid. Help?

1/31/13 9:44:10 PM PST
Assertion status system-wide:
   PreventUserIdleDisplaySleep             0
   CPUBoundAssertion                       0
   DisableInflow                           0
   ChargeInhibit                           0
   PreventSystemSleep                      0
   PreventUserIdleSystemSleep              0
   ExternalMedia                           0
   DisableLowPowerBatteryWarnings          0
   EnableIdleSleep                         1
   NoRealPowerSources_debug                0
   UserIsActive                            0
   ApplePushServiceTask                    0
Kernel Assertions: None

MacBook Pro will not sleep when charging and display is closed.

Hi,
My Mac will not sleep when it is charging. When I close my display, it will not sleep.
When I unplug the power cable, it sleeps...
I've tried to reset the SMC, and I think i did, the charger went from green to red etc different colours..
Does anybody know what this might be?
thanks

AIGHT GUYS!
This is how to fix it, and i guarantee u its 90% the cause.!
first of all, if you are a lion user (most likely all of you with this problem) go to system preferences, and then to sharing. turn all sharing OFF. especially printers....
open a terminal, and type in :
pmset -g assertions
This will show u if somehting is preventing ur mac from sleeping. on the left colomn, it should say "PreventSystemSleep" and on the right colomn a number. mine was one, which is probably the same for you guys.
Go to system preferences > Print & Scan > Open Print Queue. Make sure all the printing queues are empty and nothing is in there. You do not need to pause any or anything like that just make sure nothing is in the queue.
Close your macbook lid and look at ur light it should be sleeping. HOPE THIS WORKS FOR U
took me long enough to find out.
dont hesitate to ask me any questions

MacBook Pro won't sleep when closed

So yesterday I closed the computer at the office and came home with it like normal and this morning the battery was dead which was unusual.
I plugged in and started up, no big deal.
Then I finished just now and shut the computer and noticed that the apple and the screen stayed lit. I can't find the place in preferences to tell it to shut down when closing the screen...
Any help would be appreciated

hi,
I have the similar problem with my mac book pro 17" after updating to Mac OS X 10.5.7 and installing Safari 4 - when I close it, it goes down in the sleeping mode, but only once. When I open it and whant to close it for the second time, it doesn´t - it´s freezing. Also, if I do it manually thrue the menue, it ist the same. It is freezing and the coursor is gone and only thing I can do then is to turn it off and start again. After that the same play start again - standby works only once. Any help proposal? Tnx and greetings from Vienna

MacBook Pro won't sleep when shut

I body slammed my computer and cracked the screen. I bought a new, 3rd-party screen and had a friend install it. Now when I close the lid it won't fall asleep, and I must select sleep from the menu. Also, when it is asleep, the heartbeat is dimmer than usual. Tried resetting SMC, no luck.

I'd guess:
a) The magnetic sensor was left out or not aligned properly so it's not getting the 'lid closed' trigger
b) The lamp was replaced out of alignment so isn't directly in position to glow correctly

MBP won't sleep when charging

My 15" i5 MacBook Pro won't sleep when charging; a reset of the SMC solves the problem temporarily, but it always recurs. Interestingly, the sleep indicator light pulses as if the machine is sleeping, but I can clearly hear hard drive activity; the drive sounds like it keeps spinning up every 10 seconds or so. This is not an issue when trying to sleep when running on the battery only. Any advice?

I would just buy a wall charger for the touch and leave your MBP alone. If you really only wanted to charge it from the MBP, just make sure it doesn't sleep when plugged into the power adapter.

MacBook Pro won't sleep or shutdown (intermittent problem)

Every so often my MacBook Pro won't sleep or shut down. I can't find any rhyme or reason to it.
I notice the problem when I close lid, and it doesn't go to sleep. I then hit apple menu:sleep, and it does nothing. I hit shutdown, and OS shuts down, but gets stuck at blue screen with spinning circle indefinitely. Have to hold power button for 5 seconds to finally shut down. Startup is then slow, but doesn't give me an error message indicating improper shutdown or failure.
Most of the time it sleeps fine and shuts down fine.
Other posts seemed to have the problem more reliably, and the fix had to do with startup items. Mine is intermittent, and the only items in my startup folder are Norton Antivirus and Parallels.

I am also experiencing the exact same problem you are describing. Completely random when the machine will not sleep or shutdown, although it seems to occur more often when I've had the machine running for a few days, moving between home and office locations.
I have VMWare Fusion and Office 2004 installed. No iStatPro. I'm wondering could it be related to the kernel extensions that VMWare and Parallels install? Is anybody experiencing the non-shutting-down problem who doesn't have either VMWare or Parallels installed?
I found the following section in my system.log file that occurred the last time the machine wouldn't shut down. May be of some use to somebody
Aug 31 18:07:10 monza loginwindow[90]: sendQuitEventToApp (Microsoft AU Daemon): AESendMessage returned error -1712
Aug 31 18:07:21 monza shutdown: halt by james:
Aug 31 18:07:22 monza SystemStarter[14860]: authentication service (14870) did not complete successfully
Aug 31 18:07:28 monza SystemStarter[14860]: The following StartupItems failed to properly start:
Aug 31 18:07:28 monza SystemStarter[14860]: /System/Library/StartupItems/AuthServer
Aug 31 18:07:28 monza SystemStarter[14860]: - execution of Startup script failed

After 10.7.4 update macbook pro won't sleep

after 10.7.4 update, macbook pro won't sleep.

Test after each of the following steps that you haven’t already tried:
Step 1
 ▹ System Preferences ▹ Energy Saver ▹ Power Adapter ▹ Wake for network access: uncheck. You may need to unlock the preference pane by clicking the lock icon in the lower left corner and entering your administrator password.
Step 2
 ▹ System Preferences ▹ Energy Saver ▹ Schedule… ▹ Start up or wake: uncheck
Step 3
 ▹ System Preferences ▹ Print & Scan ▹ Open Print Queue...
Check all printers for unfinished jobs. Deal with any you find.
Step 4
Disconnect all wired peripherals except keyboard, mouse or trackball, and monitor, if applicable.
Step 5
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select All Processes from the menu in the toolbar, if not already selected. Enter “powerd” (without the quotes) in the "Filter" text field. Select the powerd process and click the Quit Process button in the toobar (stop-sign icon.) In the sheet that opens, click Force Quit. You’ll be prompted for your administrator password. The process will be relaunched immediately.
Step 6
Boot in safe mode and log in. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the Mac OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
If sleep now works as expected, go on to the next step.
Step 7
Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
Step 8
If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
If you still have the sleep issue after booting out of safe mode, post again.

My macbook pro won't hold a charge for more than a day...do I need a new battery?

my macbook pro won't hold a charge for more than a day...do I need a new battery? I have a 13" early 2011 model.

A: did you leave most of the time or always plugged in?
B: did you often drain the battery very low?
If so, then thats the issue
From Apple on batteries:
http://support.apple.com/kb/HT1446
http://www.apple.com/batteries/
Storing your MacBook
If you are going to store your MacBook away for an extended period of time, keep it in a cool location (room temperature roughly 22° C or about 72° F). Make certain you have at least a 50% charge on the internal battery of your Macbook if you plan on storing it away for a few months; recharge your battery to 50% or so every six months roughly if being stored away. If you live in a humid environment, keep your Macbook stored in its zippered case to prevent infiltration of humidity on the internals of your Macbook which could lead to corrosion.
Considerations:
Your battery is subject to chemical aging even if not in use. A Lithium battery is aging as soon as its made, regardless.
In a perfect (although impractical) situation, your lithium battery is best idealized swinging back and forth between 20 and 85% SOC (state of charge) roughly.
Further still how you discharge the battery is far more important than how it is either charged or stored short term, and more important long term that cycle counts.
Ultimately counting charge cycles is of little importance. Abuse in discharging (foremost), charging, and storing the battery and how it affects battery chemistry is important and not the ‘odometer’ reading, or cycle counts on the battery.
Everything boils down to battery chemistry long term, and not an arbitrary number, or cycle count.
Keep your macbook plugged in when near a socket since in the near end of long-term life, this is beneficial to the battery.
Peace

MacBook Pro goes to sleep when copying files from attached drives

I have noticed that since installing Yosemite my MacBook Pro goes to sleep when it is in the middle of copying a large number of files. When I wake it up the copying continues.
I have also noticed that when I am watching videos from my shared iTunes library on an Apple TV the video will stop after about 15 minutes and the connection to the library is lost because the MacBook Pro has gone to sleep. When woken up then access to the library is restored but I need to reselect the movie and then resume.
I have changed the power saving options to do not let drives sleep when idle and do not sleep laptop.
Anyone else have any experience of this or better still a fix.
Thanks in advance.

I have just found that if I turn off the display sleep in the power settings then the problem is resolved. It means though that the screen on my MacBook Pro is on all the time albeit with a screen saver.

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc drive kicks in) unless you hold the power-button down for a long period.

My macbook pro won't sleep - if I select sleep it does so initially, then the disc-drive appears to kick in and it comes back to life. It also won't turn off (again, the disc-drive kicks in) unless you hold the power-button down for a long period. Help?

Hi a,
Try an SMC Reset: http://support.apple.com/kb/HT3964

How can I make my macbook pro go to sleep when I close the lid? Currently it doesn't sleep when on battery.

How do I make my macbook pro go to sleep when I close the lid?

For this and other power related issues the best first step to try is resetting the System Management Controller.
Best of luck.

MacBook Pro won't sleep when charging

Similar Messages

Maybe you are looking for