Macbook Pro won't turn on, help please!

My Macbook 2007-08 model (all aluminum) has the start up sound internally, the screen doesnt turn on, but the light below the trackpad will turn on, then slowly dim but remain on...any help please?

Try:
Intel-based Macs: Resetting the System Management Controller (SMC)
Resetting your Mac's PRAM and NVRAM
Boot into Safe Mode if possible. If not then try booting from an installer DVD for your computer. If that doesn't work take it in for service.

Similar Messages

  • MacBook Pro WON'T TURN ON. Please help!

    I'm an editor and rely on my computer daily. Please help me.
    I purchased my 17" MacBook Pro back in April of 2008. It was dropped once the first year I had it, with no noticeable damage (thank God). I've had no major issues with it, until today.
    I was editing on it earlier this afternoon, and when I was finished, I put it away in my incase backpack like I always do. Put it in my trunk, went on some errands, and just returned home.
    I took it out to power it up. I hear the internal start up sound of the hard drive waking up and trying to spin (no apple sound) and then it just dies. Black screen the whole time. No logo. Nothing. The white light on the button to open the screen turns on and flashes, and then goes off too.
    I'm really freaked out that it's dead. If I can't start it up at all, is there any way to retrieve my files from it? I have some things backed up, but there's a lot of stuff I still need off of it. My main priority in all of this is just making sure I can save my files.
    If this clues anyone in as to what's wrong, a couple of days ago the screen started twitching black for about 2 minutes intermittently. I'd never seen it do that before, and it stopped shortly afterwards. Is this just my computer being three years old and pooping out on me randomly?
    Please help. I'm freaking out. I need all of my software.
    Thanks!

    I just logged in and the software did not return me to this page. How Primitive. It's Sunday for me, the launch day for my new international business. My Skype meeting was to be held on my Macbook Pro. The Apple staff have all decided that this day isn't very important for them, so they're at the beach. My Macbook did not turn on all day, even with the SXX reset or whatever you call it. Ctrl Alt Shift Power. I heard a little click each time I did this, to no avail. In desperation, I turned the 'laptop' (that's what the REAL world calls them) over and saw weird screws for a rare type of screwdriver. I pressed down slightly on the metal casing and heard a few of the clicks like with the SMC reset. I wondered if that would make a difference.
    I turned my computer over, opened it up, pressed the power button and it worked immediately. THE INTERIOR OF THE 2011 MACBOOK PRO MAY BE SHODDILY ASSEMBLED. My battery life is 4.5 hrs max at 50% brightness in safe mode with no 'programs' (not f***ing 'Apps') running. When I browse the internet at 50% brightness in normal mode, the battery lasts 90 mins, although I have never pressed the metal casing on the back of this laptop gently to reassemble the inner workings of this machine before, so it could last for 100 hours. Nope, I'm down to 87% after ten minutes. It's back to normal.
    Summary: To fix your Mac, hit it with a hammer. Hopefully it'll break so you can go back to Windows and actually see how many Firefox windows you have open and right click on things to bring up the menu instead of aiming your mouse for every tiny thing onto pinheads like a frekkin surgeon.

  • My macbook pro won't turn off help!

    Today I was using my macbook pro and I didn't realize it but I had 0% battery so it turned off. I hurried to plug in the charger and turned back on my computer but the problem is that now I can't turn it back off. I have tried using the power button, and everything under the apple like restart, log off and nothing will work. Help!

    Hi...
    Try Resetting the System Management Controller (SMC)

  • I have 12,000 photos on iphoto and my macbook pro won't turn on...gray screen goes to blue screen and that is it...HELP

    I have 12,000 photos on iphoto and my macbook pro won't turn on...gray screen turns blue and that is it.  HELP!!

    Run through this list of fixes
    Step by Step to fix your Mac
    You can do this to copy and remove files from the non booting internal
    Create a data recovery/undelete external boot drive

  • My MacBook pro won't turn on all the way gets to the apple with the spinning wheel underneath and that's all I need help asap

    My MacBook pro won't turn on it just gets 2 the spinning wheel and keeps spinning

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    If this doesn't work then you will need to erase the drive and install Snow Leopard from scratch:
    Erase and Install Snow Leopard
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. When completed quit DU and complete the Snow Leopard installation.

  • My macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

    my macbook pro won't turn on and it is plugged into the charger, the light doesn't even turn a color?

    Might be a problem with the adapter.
    Help here >  Apple Portables: Troubleshooting MagSafe adapters

  • My macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on.

    my macbook pro won't turn on. it just stays stuck on a white screen with a little circle spinning around and around when you power it on. i don't know how to get it to progress past this loading page.

    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Reinstalling Mavericks, Lion/Mountain Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion, Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    If you are not using Lion, Mountain Lion, or Mavericks then use the following procedure:
    Resetting your Mac's PRAM and NVRAM
    Intel-based Macs: Resetting the System Management Controller (SMC)
    Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • My macbook pro is not charging - any help please!?

    My macbook pro is not charging - any help please!?
    <Edited by Host>

    Hi sdennisonta,
    If you are having an issue with charging your MacBook Pro, I would suggest that you troubleshoot using the steps in this article - 
    Mac notebooks: All about batteries - Apple Support
    If the battery appears to be working correctly you may want to see if the issue lies with your power adapter. Use the steps in this article -
    Apple Portables: Troubleshooting MagSafe adapters - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

    My MacBook Pro won't turn on, only a white screen with spinning circle, I've only had it a few weeks! Any ideas what is going on?

    Mac OS X: Gray screen appears during startup 

  • My MacBook Pro won't turn on although the battery life is showing full

    My MacBook Pro won't turn on although my battery life is showing full ,

    Go step by step and test.
    http://support.apple.com/kb/TS1365
    Note: Steps 5 and 6
    Step 5
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • My MacBook Pro won't turn on. What keys do I use toed last week.

    My MacBook Pro won't turn on. What are the keys to reboot?  This happened last week.

    http://support.apple.com/kb/HT3964 if you haven't replaced the PRAM battery in the last 4 years.
    If you have:
    http://support.apple.com/kb/HT1379
    Note, the PRAM battery is not the normal replaceable battery for power.  It is the equivalent of the PC CMOS battery.

  • My MacBook Pro won't turn on, what's wrong?

    My MacBook Pro won't turn on. What's wrong?

    gobetty wrote:
    My MacBook Pro won't turn on. What's wrong?
    Depends upon what you mean by it not turning on, there are various causes.
    Is the power button pressed and nothing happens? Disconnect all other devices, then a SMC and NVRAM reset.
    Is there a white screen and nearly nothing? A hosed EFI firmware.
    Is there a grey screen and a loading bar that gets stuck? Either a failed firmware update or corrupted drive/OS X.
    Is there a grey screen with a spinning wheel? Bad third party or Apple at boot kext file.
    Are you loading but not able to log in? Possible corrupt third party software designed to startup upon login.
    ..Step by Step to fix your Mac

  • My macbook pro won't turn on without any reason?

    my macbook pro won't turn on without any reason, is there any solution in this case?

    You need to hit the "reply" button on post to whom your responding too, it's hard to tell if your responding to me or someone else.
    small button on the side of the computer and didn't lightting up( no reponse at all). is their any problems do think with the battery?
    Usually if your battery is dead because it wasn't charged you can do the SMC Reset and then check the Magsafe if it's connected and showing the orange light, then let the battery charge up.
    Once the battery charges up, the computer will boot normally and then you have to reset the PRAM, time, date etc.
    https://support.apple.com/kb/TS1365
    Magsafe issues: https://support.apple.com/kb/TS1713   https://support.apple.com/kb/TS4127
    *PRAM Reset  http://docs.info.apple.com/article.html?path=Mac/10.6/en/26871.html
    What's store in PRAM   https://support.apple.com/kb/HT1242
    Hardware Test
    https://support.apple.com/kb/ht1509

  • Help - MacBook Pro won't turn on

    Help - my macbook pro will not turn on even though it is plugged in. Holding down the power button is ineffective. The power cord has the green "charged" light, but when I plugged it in, it wasn't charged and never did charge (the light never was orange). The computer worked perfectly this morning.

    Will it not turn on at all or do you just get a gray screen?
    If a gray screen, look at this:
    https://discussions.apple.com/docs/DOC-5282
    If it does not turn on at all, try a SMC reset:
    http://support.apple.com/kb/ht3964
    If the reset fails to bring life to the MBP, make an appointment at an Apple store genius bar for a free evaluation.
    Ciao.

  • My new MacBook pro is not turning on!please give me solution!!

    My new 2012 MacBook pro is not turning on!i already set up the mac!next day when I tried to start it,it was not turning on!i tried with pressing command,control and power button together but it's not working!!please help!!

    You should contact Apple as soon as possible.
    1-800-275-2273

Maybe you are looking for

  • Computer Hard Drive crash

    So, here's the deal. I paid for a bunch of music - at least 100 bucks worth. My harddrive recently crashed, and I was unable to recover the songs, or any data for that matter. How do I go about re-getting these songs? I know that apple's got a histor

  • Issue with Automatic Purchase Order creation.

    Hello I am creating Automatic Purchase Order via transaction ME59N. I have  1 Purchase Requistion for 2 line items having 2 materials .When I create PO the system is creating 2 different PO's instead of one PO even though the Vendor is same.I am not

  • How can I get the coordinates to draw a line?

    Hi, I want to draw a line. Here is a part of my Quell-code. public class Map extends JFrame { public Map() { super("Map"); setSize(340, 340); MapPane map = new MapPane(); getContentPane().add(map); class MapPane extends JPanel { public void paintComp

  • Automatic creation of work center

    Hi gurus, Is it possible to instantly create work centers every time an employee is hired and created via HR module? We would like to link the work center per employee. The ratio is 1:1. 1 work center per employee. We are thinking this will be done v

  • Address translation for intranet access

    Hi, We are using iviews created using in SAP Web Dynpto iView template in SAP Enterprise Portal 7.0. Resently, we have migarated server from 32 bit machine to 64 bit machine. After migration We are facing some problem with web dynpro applications. We