Macbook Tiger Fresh Install Help
Hope someone can help me with this because it is driving me crazy. Last week my HDD died it was the original and about 4 years old. So i have purchased a new HDD and installed it into my Macbook but I'm having problems reinstalling the tiger software from the reinstall DVD that came with the Macbook. I have loaded it up and used the disk utilities to erase the new HDD. The problem accurse when the install start the disk check keeps failing.
I'm assuming this is something to do with my Disc or the optical drive the only problem is i only have the one disc and don't have access to another optical drive.
Does anyone have any ideas how i could get round this.
Any help would be much appreciated.
Since it is an old install DVD....is it clean and free of scratches?....maybe one of those restore kits for cleaning CD's and DVD's.....
If you could use Disk Utility to erase the new drive it apparently can read the DVD....have you formatted the new drive 'GUID' when you prepped it?
Similar Messages
-
Late 2007 MacBook Pro - Fresh install
I have a late 2007 MacBook Pro. I want to do a fresh install. Is it best to use the original discs, which would take me back to tiger, or can I just use a new retail copy of Snow Leopard?
Will that retail copy of Snow Leopard hold all the proper drivers for the late 2007 mbp?I just did a fresh install of Snow Leopard on my late 2007 MPB (I bought it in Jan 08 and it shipped with Leopard). Worked out fine, only difference is the Retail Snow Leopard doesn't bundle the iLife applications like the originals did. Other than that it went very smoothly.
-
I wanted to know if someone could help with step by step instructions on hhow to do a fresh install of 10.6. I know I probably have to boot of the CD but after that I am a little lost. Thank you
I would move to SL if, and only if, I had an external drive with a bootable clone of my internal on it. I think that there is enough risk in going to SL that such conservatism is warranted. I would not use time machine. Without getting into detail, it can be highly problematic. You will be able to extract your settings, files, and programs from your clone if you do the current version of an erase and install.
To erase and install, start up to your DVD and stop after selecting your language. Use the menus to start Disk Utility and erase you drive. Quit Disk Utility and proceed with your installation. At the end, you will be able to choose to reclaim your settings, files, and apps from the clone (leave the external drive plugged in during the installation).
If you do not like SL, then you can restore your internal using the clone. I would do all cloning and related restoration with SuperDuper. This app is up to date. -
I have worked with SunONE Directory Servers all the way back to verson 3. However, I am having a very hard time getting this new version to work.
I am attempting to install it in a Solaris 10 Full Local Zone, but I am having no success.
After running the native Solaris 10 install using the command: ./installer.sh
Everything seemed to install correctly.
I then ran the dsccsetup initialize command as noted in the documentation. It noted that the agents were already registered and asked me to enter the manager password, which I did.
I then ran the dsccsetup status command as recommended. It noted that the agents were already registered and allowed me to enter a password.
# ./dsccsetup status
DSCC Application is registered in Sun Java (TM) Web Console
DSCC Agent is registered in Cacao
Cacao is down. Start it using:
/usr/sbin/cacaoadm start
DSCC Registry has been created
Path of DSCC registry is /var/opt/SUNWdsee/dscc6/dcc/ads
Port of DSCC registry is 3998
Here is where the problems started occuring...
When I tried to start the CACAO, I get the following message:
# /usr/sbin/cacaoadm start
Error when trying to start SMF service: [svc:/application/management/common-agent-container-1:default].
When I tried to start the webserver service, I get the following message:
# /usr/sbin/smcwebserver start
Starting Sun Java(TM) Web Console Version 3.0.2 ...
svcprop: Couldn't find property `restarter/logfile' for instance `svc:/system/webconsole:console'.
Cannot determine if console service is running.
Check log file:
Run "svcs system/webconsole:console" to determine its status.
Any assistance that can be provided to point me in the correct direction is appreciated.You seem to have a pb with SMF.
I would check the SMF logs for more details on the real issue.
Regards,
Ludovic. -
Please...
Where do I continue; I have a '07 Macbook Pro, and would truly appreciate your help as I have freshly installed my osx beginning with my original 10.4
Thank you
PS
I should mention; for reasons unknown to me, I no longer have use of my disk drive since reinstalling 10.4.You can use software update to install the latest version of Tiger. If you connect an external DVD drive you can install an upgrade to Snow Leopard. The disk is available at the Apple online store:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Further upgrades are dependent upon the EXACT model of your MBP.
Ciao. -
Why is Mavericks running so slowly after a fresh install on my Macbook Pro?
I have a 13-inch, Early 2011 Macbook Pro.
Towards the end of 2013 Mountain Lion had been running very sluggishly, and I was getting the spinning beachball of death all the time, so I decided to do a fresh install of Mavericks. I wiped my whole HD using disk utility and installed Mavericks from a flash drive.
I then installed Microsoft Office 2011 from the original DVD and set up Mac Mail to work with my Gmail account etc. All very standard. I also installed X-Code and various other things related to my work, but nothing crazy. My HD is only half-full (I have 141 GB of free space).
Despite this, everything is running really sluggishly (especially when MS Office programs are open) and I have to watch the beachball of death spin for about 10 seconds every minute.
Any help is greatly appreciated!
Here is the Etrecheck output:
Hardware Information:
MacBook Pro (13-inch, Early 2011)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
System Software:
OS X 10.9.1 (13B42) - Uptime: 2 days 3:4:35
Disk Information:
Hitachi HTS545032B9A302 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 319.21 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-898 disk2 : (8.09 GB)
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple, Inc. Keyboard Hub
Apple, Inc Apple Keyboard
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[System] com.adobe.fpsaud.plist 3rd-Party support link
[System] com.microsoft.office.licensing.helper.plist 3rd-Party support link
[System] com.oracle.java.Helper-Tool.plist 3rd-Party support link
[System] com.robohippo.HippoConnectDaemon.plist 3rd-Party support link
[System] com.trusteer.rooks.rooksd.plist 3rd-Party support link
[System] cx.pow.firewall.plist 3rd-Party support link
Launch Agents:
[System] com.oracle.java.Java-Updater.plist 3rd-Party support link
[System] com.robohippo.HippoConnectAgent.plist 3rd-Party support link
[System] com.trusteer.rapport.rapportd.plist 3rd-Party support link
User Launch Agents:
[not loaded] com.google.keystone.agent.plist 3rd-Party support link
[not loaded] com.spotify.webhelper.plist 3rd-Party support link
[not loaded] cx.pow.powd.plist 3rd-Party support link
User Login Items:
iTunesHelper
Internet Plug-ins:
FlashPlayer-10.6: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 12.0.0.38 - SDK 10.6 3rd-Party support link
Default Browser: Version: 537 - SDK 10.9
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 3rd-Party support link
Silverlight: Version: 5.1.20913.0 - SDK 10.6 3rd-Party support link
JavaAppletPlugin: Version: Java 7 Update 51 3rd-Party support link
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
3rd Party Preference Panes:
Flash Player 3rd-Party support link
Java 3rd-Party support link
Trusteer Endpoint Protection 3rd-Party support link
Bad Fonts:
None
Old Applications:
/Library/Application Support/Microsoft/MERP2.0
Microsoft Error Reporting: Version: 2.2.9 - SDK 10.4 3rd-Party support link
Microsoft Ship Asserts: Version: 1.1.4 - SDK 10.4 3rd-Party support link
Solver: Version: 1.0 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
SLLauncher: Version: 1.0 - SDK 10.5 3rd-Party support link
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
/Applications/Microsoft Office 2011/Office
Microsoft Graph: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Utility: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Office Reminders: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Upload Center: Version: 14.3.9 - SDK 10.5 3rd-Party support link
My Day: Version: 14.3.9 - SDK 10.5 3rd-Party support link
SyncServicesAgent: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Open XML for Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Alerts Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Database Daemon: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Chart Converter: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Clip Gallery: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Epson Printer Utility 4: Version: 9.17 - SDK 10.5 3rd-Party support link
/Library/Printers/EPSON/InkjetPrinter2/Utility/UT4/Epson Printer Utility 4.app
/Applications/Microsoft Office 2011
Microsoft PowerPoint: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Excel: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Outlook: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Word: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Document Connection: Version: 14.3.9 - SDK 10.5 3rd-Party support link
Microsoft Language Register: Version: 14.3.9 - SDK 10.5 3rd-Party support link
/Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
Microsoft AutoUpdate: Version: 2.3.6 - SDK 10.4 3rd-Party support link
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
Smultron: Version: 3.8.4 - SDK 10.0 3rd-Party support link
Time Machine:
Auto backup: YES
Volumes being backed up:
Destinations:
Time Machine Backups [Local] (Last used)
Total size: 412.18 GB
Total number of backups: 4
Oldest backup: 2014-01-07 12:40:04 +0000
Last backup: 2014-01-20 17:50:35 +0000
Size of backup disk: Excellent
Backup size 412.18 GB > (Disk size 0 B X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU:
17% Mail
8% mtmd
5% mds_stores
3% mds
2% iTunes
Top Processes by Memory:
217 MB Mail
184 MB com.apple.WebKit.WebContent
139 MB softwareupdated
115 MB mds_stores
106 MB Google Chrome
Virtual Memory Information:
186 MB Free RAM
1.21 GB Active RAM
983 MB Inactive RAM
1.07 GB Wired RAM
7.85 GB Page-ins
326 MB Page-outs1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -q XML\|exec && echo $f; done; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed '8!d;s/^ *//'; o=`SP Hardware | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`SP USB | awk '/V.*[(]/{if ($3 !~ /0(5a|a5)c/) print}' | wc -l`; Ps "3rd-party USB devices"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | awk -F_ '!/ag$/{$NF=a[split($NF,a,".")]; print}' | tail`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | grep -v com\.apple\.CSConfig | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/Star*; do M; done`; Pm "Startup items"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f | while read f; do file -b "$f" | grep -qw shared && ! codesign -v "$f" && echo $f; done`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter
exec sh
and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
8. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
So, I've got several thousand photos, and a decent amount of videos of my daughter, along with a lot of stuff for work stored on my Time Capsule, and now I can't access any of it. I did a fresh install of Mavericks on my MacBook Pro last week sometime, and haven't been able to figure out how to get my files back. Please Help!!! My daughter is 2 and a half, and every picture/video I have of her is locked on this thing. I was planning on making some photo/video projects fo my wife for Christmas, and now I'm definitely not going to be able to pull it off. Her birthday is at the end of January, though, so if I could have it by then, that would rule!
Basically, the bar on the right of the screen has some gray dates, which I can access (all backups after the Mavericks install), and purple dates that go all the way back to March (when I originally purchased and began using the TC) which deny me access/viewing. It's possible that I created a slightly different user name when I reset my MacBook, which I guess is most likely the cause, but I have no idea what to do now to correct it. Thanks for taking the time!Mavericks does really nasty stuff..
Try manually mounting the sparsebundle and extract the files you want.
Yet another Pondini reference. http://pondini.org/TM/15.html
We have avoided Mavericks you see knowing that it would cause these kinds of issues..
You never ever load a new OS without doing a disk image beforehand.. TM is not reliable enough or trustworthy to be depended on.
If none of the above work..
I would get a USB drive on the computer and install Mountain Lion or whatever OS you had before you unfortunately upgraded to Mavericks.. Then use TM from that decent installation but mount the sparsebundle and choose the backup from a date well before mavericks was installed.
Once you have extracted the files.. or even done a full restore you might be able to extract the files you want. -
Macbook Pro stuck in restart loop with fresh install
Hello!
I have a Macbook Pro (Mid 2009) that I have been running Snow Leopard on up until now. I had been meaning to upgrade to Mavericks for a while, but had just never gotten around to it. Over the last month or so, my Macbook has been running really slow, hanging on the spinning beachball every few minutes for a few seconds (sometimes up to a minute or so). So I figured a clean start might be the best way to go, and while I'm at it, I might as well upgrade to Mavericks.
I backed up all my data, and then I created a Mountain Lion bootable usb (I had trouble making a Mavericks bootable usb from Snow Leopard, and since I had bought Mountain Lion for my desktop, I just decided to do a fresh install of that, and then upgrade to Mavericks). I had no problem booting to the usb, erased my hard drive and did a fresh install of Mountain Lion. However, after the install on the usb, my mac restarted and got stuck in a restart loop. It will chime, show the apple logo and spinning gears for a few seconds, then the gears stop spinning, and then the mac immediately restarts (this time displaying a message saying the mac has recovered from a shutdown in a number of languages), and the same thing happens again.
I was able to boot into the recovery partition, checked the permissions, found some that needed to be fixed, ran the repair permissions, verified the disk and was told the disk appears okay. Tried to then restart and same thing.
I have reset SMC, NVRAM, and none of these change anything. I booted in single user mode and ran fsck -fy, and recieved a message saying modifications were made, rebooted, same thing.
I have booted in verbose mode and the system restarts at the same point every time, right after displaying a message that says
SMC::smcReadKeyAction Error: (and then something with "BEMB", it goes by really fast so its hard to read exactly)
I have managed to boot into safe mode, but this has not made a difference. On one of my boots into safe mode, I went ahead and made a Mavericks bootable usb, and restarted the process: wiped the drive, installed mavericks, but I am in the exact same situation. I can still boot into safe mode.
I have seen some other issues that people have posted, but most involve the system freezing after the apple screen (not restarting) or do not involve freshly formatted HDs.
I'm just tying to find out if this is a hard drive issue, or if my mac itself needs to be retired. It has had a pretty long life (being 5 years old), and one of the RAM bays doesn't work (it is only running 4GB of ram, not sure if that can cause a problem with the boot cycle).
Sorry if thats a lot of information, I've been trouble shooting this for a few days. But thanks for any help you can offer!
A strange note:
-when booting from the mavericks usb, I got stuck in the restart loop a couple of times. I managed to get past this by clicking the mousepad a few times right after the gears finished spinning. The mouse became visible, the apple screen shifted color a bit (went from a bluish gray tint to an orangish gray tint), the mouse became visible, and I got to the reinstall menu as normal. As far as I can tell the clicking may have been coincidental, but it was the only time I was able to boot the usb, and I wasn't going to risk restarting to test that, and then not be able to boot again.Hey, thank you for your reply! I didn't have everything backed up, but I have a lot of my important stuff saved, though, so that's somewhat of a relief..
As far as my hard drive is concerned, would I have to send it in somewhere to get it fixed or would I just have to get a brand new one? If so, how much? Sorry if I seem a bit amateur, but this computer is my first personal computer, and I'm really lost without it! -
I just purchased a macbook pro and was wondering about an install disk. It seems to be missing some of the applications that should be on it from a fresh install. I was wondering if I would have to purchase a new OS and do a fresh install?
Ahhh, well you never mentioned that before. You need to contact your friend from whom you purchased the computer. He/She should have any and all install discs for any third-party software included as well as for OS X and the original pre-installed software.
Apple will gladly sell you replacements for any discs that did come with the computer originally, but they will not do anything for you because you purchased the computer used. If it's in warranty still, then you can get any warranty covered things taken care of through AppleCare:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support visit online support site. -
I wish to sell my 2008 MacBook Pro. Have erased hard disk and when I went to fresh instal Mavericks OSX 10.6 (it gives me no other choice in the disk utility program) It says in the Apple Store, it is unavailable. But because this is done from disk utility there is no operating system or access to choose another OS eg Yosemite. I cannot download anything using my iMac as that came ready loaded with Yosemite, so it does not show as a purchase. I do not want to use the Time Machine backup as that has all my details, apps etc. in it. Would the best way be to purchase a disk containing Mavericks the OS that was on it most recently. Can anyone offer advice please?
You need to re-install the OS the computer shipped with using the disks that were supplied with the computer. Contact Apple Support and have the serial number of your computer available. They will send you new disks for a small fee.
Selling old Mac
Selling old Mac (2)
Selling old Mac (3)
Selling old Mac (4) Apple support -
I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.
If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano -
The certificate on my applications install DVD for bundled software has expired. I am unable to reinstall with this dvd on my snow leopard on macbook pro. Pl help. If I use Lion, it works fine with the expired certificate. But doesnt work with snowleopard.
Create a DMG file of your DVD (instructions here: http://www.wikihow.com/Make-a-DMG-File-on-a-Mac).
Then follow the instructions here: http://managingosx.wordpress.com/2012/03/24/fixing-packages-with-expired-signatu res/ -
Macbook pro i7 - Mid 2010 - Lion 10.7.2 fresh install CRASHES
Hello MacHeads like my self,
I have a macbook pro - mid 2010 (i7, 8gb ram), I had a major disk corruption a few days ago (WD 750gb 7200rpm), bunch of bad sectors and I belive it took place becouse I had the crazy black screen failiur going on for a few weeks until apple released the update to fix that, but I had to hard reset the macbook several times and that could have caused the bad sectors...
Anyhow, I pulled the drive out, put a new one in, a 500gb 5400rpm made by Segate, fresh install of teh LION, made all of the available updates... it was running fine until yesterday when I got the the black screen again... I could not belive it... so I hard reste it again... today, the macbook crashed on it's own as I was writing a message using skype, I thought it was the black screen again (video failiur) but no, it actualy restarted on it's own.
Any ideas?
Here is the crash report below if someone can read this:
Interval Since Last Panic Report: 289253 sec
Panics Since Last Report: 5
Anonymous UUID: 1D1CDDD3-67E7-449D-BE38-7B3A880F39F9
Wed Jan 25 11:16:36 2012
panic(cpu 2 caller 0xffffff7f8091500b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff8115b6f000 0x0a5480a2, D0, P3/4
Backtrace (CPU 2), Frame : Return Address
0xffffff80f19132b0 : 0xffffff8000220702
0xffffff80f1913330 : 0xffffff7f8091500b
0xffffff80f19133c0 : 0xffffff7f80a05120
0xffffff80f1913410 : 0xffffff7f80a051e0
0xffffff80f1913470 : 0xffffff7f80cb1749
0xffffff80f19135b0 : 0xffffff7f80a24269
0xffffff80f19135e0 : 0xffffff7f8091e96e
0xffffff80f1913690 : 0xffffff7f8091a270
0xffffff80f1913880 : 0xffffff7f8091be75
0xffffff80f1913960 : 0xffffff7f817e0138
0xffffff80f19139a0 : 0xffffff7f817ef798
0xffffff80f19139c0 : 0xffffff7f8180b3fc
0xffffff80f1913a00 : 0xffffff7f8180b461
0xffffff80f1913a40 : 0xffffff7f817f360d
0xffffff80f1913a90 : 0xffffff7f817a9f63
0xffffff80f1913b10 : 0xffffff7f817a89d4
0xffffff80f1913b40 : 0xffffff7f817ae429
0xffffff80f1913b70 : 0xffffff80006528dd
0xffffff80f1913be0 : 0xffffff8000652c7c
0xffffff80f1913c40 : 0xffffff800065343b
0xffffff80f1913d80 : 0xffffff80002a3898
0xffffff80f1913e80 : 0xffffff8000223006
0xffffff80f1913eb0 : 0xffffff8000214829
0xffffff80f1913f10 : 0xffffff800021bb58
0xffffff80f1913f70 : 0xffffff80002ae8a0
0xffffff80f1913fb0 : 0xffffff80002d8383
Kernel Extensions in backtrace:
com.apple.NVDAResman(7.1.4)[71EBC846-807C-386D-8D01-E144A87FAC0F]@0xffffff7f808 b4000->0xffffff7f80b8dfff
dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f8083f000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[6517D9A6-58F5-3CFC-B021-C882306150D5]@0xff ffff7f808a2000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[55FF26D3-292D-3B4B-8AB7-1D25C8B4313B]@0 xffffff7f8086a000
com.apple.nvidia.nv50hal(7.1.4)[A44D0B74-5A18-34D5-842C-4E280365F55F]@0xffffff7 f80b8e000->0xffffff7f80eaffff
dependency: com.apple.NVDAResman(7.1.4)[71EBC846-807C-386D-8D01-E144A87FAC0F]@0xffffff7f808 b4000
com.apple.GeForce(7.1.4)[6E2E0D5E-F779-35F2-A12C-0BAD59229A0E]@0xffffff7f817910 00->0xffffff7f81850fff
dependency: com.apple.NVDAResman(7.1.4)[71EBC846-807C-386D-8D01-E144A87FAC0F]@0xffffff7f808 b4000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[6517D9A6-58F5-3CFC-B021-C882306150D5]@0xff ffff7f808a2000
dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f8083f000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[55FF26D3-292D-3B4B-8AB7-1D25C8B4313B]@0 xffffff7f8086a000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 9837198261796
last loaded kext at 8794451183636: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f8078d000, size 36864)
last unloaded kext at 9156783028694: com.apple.iokit.IOAVBFamily 1.0.0d22 (addr 0xffffff7f8078d000, size 36864)
loaded kexts:
com.paragon-software.filesystems.ntfs 82
at.obdev.nke.LittleSnitch 2.4.2
com.apple.driver.AppleBluetoothMultitouch 66.3
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleHDA 2.1.3f7
com.apple.driver.AppleMikeyDriver 2.1.3f7
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AGPM 100.12.42
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleIntelHDGraphics 7.1.4
com.apple.driver.AppleIntelHDGraphicsFB 7.1.4
com.apple.driver.AppleUSBDisplays 317
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.1
com.apple.GeForce 7.1.4
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.AppleMuxControl 3.0.16
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.AppleUSBCardReader 3.0.1
com.apple.driver.AppleIRController 312
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.Oxford_Semi 3.0.1
com.apple.iokit.SCSITaskUserClient 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AirPort.Brcm4331 512.20.18
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleUSBEHCI 4.5.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 167.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 167.0.0
com.apple.driver.AppleMultitouchDriver 220.62.1
com.apple.driver.IOBluetoothHIDDriver 4.0.1f4
com.apple.iokit.IOBluetoothSerialManager 4.0.1f4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.1.3f7
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleHDAController 2.1.3f7
com.apple.iokit.IOHDAFamily 2.1.3f7
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.nvidia.nv50hal 7.1.4
com.apple.NVDAResman 7.1.4
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBHIDKeyboard 152.3
com.apple.driver.AppleHIDKeyboard 152.3
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.1f4
com.apple.iokit.IOBluetoothFamily 4.0.1f4
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.1
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.0
com.apple.iokit.IOFireWireSBP2 4.2.0
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.1
com.apple.iokit.IO80211Family 411.1
com.apple.iokit.IOUSBUserClient 4.5.3
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOUSBFamily 4.5.3
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 8 GB, SMC 1.58f16
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x04CD, 0x46332D3130363636434C392D344742535100
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x04CD, 0x46332D3130363636434C392D344742535100
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.100.98.75.18)
Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: ST9500325AS, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8218, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0236, 0xfa120000 / 4
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa130000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: hub_device, apple_vendor_id, 0x9122, 0xfd130000 / 5
USB Device: hub_device, 0x0409 (NEC Corporation), 0x0059, 0xfd131000 / 7
USB Device: Cruzer, 0x0781 (SanDisk Corporation), 0x5530, 0xfd131100 / 9
USB Device: hub_device, 0x0409 (NEC Corporation), 0x0059, 0xfd131400 / 8
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd131440 / 10
USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc51a, 0xfd131443 / 12
USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd131442 / 11
USB Device: Apple Cinema HD Display, apple_vendor_id, 0x921e, 0xfd132000 / 6
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8507, 0xfd110000 / 3
FireWire Device: My Book, WD, 800mbit_speed
FireWire Device: USB2.0 & 1394 & eSATA combo Drive, PI-367, 800mbit_speed
THANK YOULatest crash log:
Interval Since Last Panic Report: 39836 sec
Panics Since Last Report: 2
Anonymous UUID: 1D1CDDD3-67E7-449D-BE38-7B3A880F39F9
Tue Jan 31 18:28:22 2012
panic(cpu 2 caller 0xffffff7f8091500b): NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff811554f000 0x0a5480a2, D0, P3/4
Backtrace (CPU 2), Frame : Return Address
0xffffff80f1f5b2b0 : 0xffffff8000220702
0xffffff80f1f5b330 : 0xffffff7f8091500b
0xffffff80f1f5b3c0 : 0xffffff7f80a05120
0xffffff80f1f5b410 : 0xffffff7f80a051e0
0xffffff80f1f5b470 : 0xffffff7f80cb1749
0xffffff80f1f5b5b0 : 0xffffff7f80a24269
0xffffff80f1f5b5e0 : 0xffffff7f8091e96e
0xffffff80f1f5b690 : 0xffffff7f8091a270
0xffffff80f1f5b880 : 0xffffff7f8091be75
0xffffff80f1f5b960 : 0xffffff7f8184a138
0xffffff80f1f5b9a0 : 0xffffff7f81859798
0xffffff80f1f5b9c0 : 0xffffff7f818753fc
0xffffff80f1f5ba00 : 0xffffff7f81875461
0xffffff80f1f5ba40 : 0xffffff7f8185d60d
0xffffff80f1f5ba90 : 0xffffff7f81813f63
0xffffff80f1f5bb10 : 0xffffff7f818129d4
0xffffff80f1f5bb40 : 0xffffff7f81818429
0xffffff80f1f5bb70 : 0xffffff80006528dd
0xffffff80f1f5bbe0 : 0xffffff8000652c7c
0xffffff80f1f5bc40 : 0xffffff800065343b
0xffffff80f1f5bd80 : 0xffffff80002a3898
0xffffff80f1f5be80 : 0xffffff8000223006
0xffffff80f1f5beb0 : 0xffffff8000214829
0xffffff80f1f5bf10 : 0xffffff800021bb58
0xffffff80f1f5bf70 : 0xffffff80002ae8a0
0xffffff80f1f5bfb0 : 0xffffff80002d8383
Kernel Extensions in backtrace:
com.apple.NVDAResman(7.1.4)[71EBC846-807C-386D-8D01-E144A87FAC0F]@0xffffff7f808 b4000->0xffffff7f80b8dfff
dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f8083f000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[6517D9A6-58F5-3CFC-B021-C882306150D5]@0xff ffff7f808a2000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[55FF26D3-292D-3B4B-8AB7-1D25C8B4313B]@0 xffffff7f8086a000
com.apple.nvidia.nv50hal(7.1.4)[A44D0B74-5A18-34D5-842C-4E280365F55F]@0xffffff7 f80b8e000->0xffffff7f80eaffff
dependency: com.apple.NVDAResman(7.1.4)[71EBC846-807C-386D-8D01-E144A87FAC0F]@0xffffff7f808 b4000
com.apple.GeForce(7.1.4)[6E2E0D5E-F779-35F2-A12C-0BAD59229A0E]@0xffffff7f817fb0 00->0xffffff7f818bafff
dependency: com.apple.NVDAResman(7.1.4)[71EBC846-807C-386D-8D01-E144A87FAC0F]@0xffffff7f808 b4000
dependency: com.apple.iokit.IONDRVSupport(2.3.2)[6517D9A6-58F5-3CFC-B021-C882306150D5]@0xff ffff7f808a2000
dependency: com.apple.iokit.IOPCIFamily(2.6.7)[6D54F06A-46B7-37FC-AF22-DE68DC18A1A3]@0xffff ff7f8083f000
dependency: com.apple.iokit.IOGraphicsFamily(2.3.2)[55FF26D3-292D-3B4B-8AB7-1D25C8B4313B]@0 xffffff7f8086a000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug 9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 40744983058425
last loaded kext at 39902417273229: com.apple.driver.AppleUSBCDC 4.1.15 (addr 0xffffff7f80833000, size 16384)
last unloaded kext at 40130748101624: com.apple.driver.AppleUSBCDC 4.1.15 (addr 0xffffff7f80833000, size 12288)
loaded kexts:
com.paragon-software.filesystems.ntfs 82
com.Logitech.Control Center.HID Driver 3.5.1
at.obdev.nke.LittleSnitch 2.4.2
com.apple.driver.Oxford_Semi 3.0.1
com.apple.driver.AppleHWSensor 1.9.4d0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.26
com.apple.driver.AppleHDA 2.1.3f7
com.apple.driver.AppleMikeyDriver 2.1.3f7
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AGPM 100.12.42
com.apple.driver.AppleIntelHDGraphics 7.1.4
com.apple.driver.AppleIntelHDGraphicsFB 7.1.4
com.apple.driver.SMCMotionSensor 3.0.1d2
com.apple.driver.AppleUSBDisplays 317
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.GeForce 7.1.4
com.apple.driver.AudioIPCDriver 1.2.1
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.5d4
com.apple.driver.AppleLPC 1.5.3
com.apple.driver.AppleMuxControl 3.0.16
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 225.2
com.apple.driver.AppleUSBTCKeyboard 225.2
com.apple.driver.AppleUSBCardReader 3.0.1
com.apple.driver.AppleIRController 312
com.apple.iokit.SCSITaskUserClient 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.IOAHCIBlockStorage 2.0.1
com.apple.driver.AppleUSBHub 4.5.0
com.apple.driver.AppleFWOHCI 4.8.9
com.apple.driver.AirPort.Brcm4331 512.20.18
com.apple.iokit.AppleBCM5701Ethernet 3.0.8b2
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleAHCIPort 2.2.0
com.apple.driver.AppleUSBEHCI 4.5.0
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleIntelCPUPowerManagementClient 167.0.0
com.apple.driver.AppleAPIC 1.5
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 167.0.0
com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.0
com.apple.iokit.IOFireWireSBP2 4.2.0
com.apple.driver.DspFuncLib 2.1.3f7
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.iokit.IOFireWireIP 2.2.4
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOBluetoothSerialManager 4.0.1f4
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.AppleHDAController 2.1.3f7
com.apple.iokit.IOHDAFamily 2.1.3f7
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.ApplePolicyControl 3.0.16
com.apple.driver.AppleSMC 3.1.1d8
com.apple.driver.IOPlatformPluginFamily 4.7.5d4
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.AppleGraphicsControl 3.0.16
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.nvidia.nv50hal 7.1.4
com.apple.NVDAResman 7.1.4
com.apple.iokit.IONDRVSupport 2.3.2
com.apple.iokit.IOGraphicsFamily 2.3.2
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBHIDKeyboard 152.3
com.apple.driver.AppleHIDKeyboard 152.3
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController 4.0.1f4
com.apple.iokit.IOBluetoothFamily 4.0.1f4
com.apple.driver.AppleUSBMultitouch 227.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.0.1
com.apple.iokit.IOUSBMassStorageClass 3.0.0
com.apple.iokit.IOUSBHIDDriver 4.4.5
com.apple.driver.AppleUSBMergeNub 4.5.3
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.1
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.7
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOAHCISerialATAPI 2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.1
com.apple.iokit.IOUSBUserClient 4.5.3
com.apple.iokit.IOFireWireFamily 4.4.5
com.apple.iokit.IO80211Family 411.1
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOAHCIFamily 2.0.7
com.apple.iokit.IOUSBFamily 4.5.3
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165.3
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 331
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.7
com.apple.iokit.IOACPIFamily 1.4 -
Installing iLife '08 from Tiger discs on a fresh install of Snow Leopard
I just had a brand new hard drive installed on my imac. I am currently installing Snow Leopard as I type this post. I purchased the $35 SL disc as I have iLife '08 on my Tiger (10.4) discs. Before I install iLife I would like to know if I have to put disc 1 before disc 2 or just disc 2? Will I be able to just do a software update check and install to bring iLife '08 up to date with the SL? I realize that it won't be iLife '09 but I am concerned about '08 being compatible with a fresh install of SL.
Kat2007 wrote:
One more thing...I only have the microsoft office for mac 2004. If I install this, can I check for a software update that will bring me up to speed with Office?
Yes, check here...
http://www.microsoft.com/mac/downloads.mspx?pid=Mactopia_Office2004
Also, will the software updates (if I check and run a software update) happen for iLife '08?
Yes, they should.
-mj
Maybe you are looking for
-
How to send dms document as email attachemnt
Dear Techies Can you share the code to send the dms document as an email attachment through abap program. Thanks in advance. regards Omer Humayun
-
Hi, i need help... i can't download and install thing in my computer.
This is the problem. Microsoft. VC80.CTR.typ
-
Mac crashed..can't sync..help!
my macbook crashed and i lost everything and now i can't sync my phone. I authorized the computer, and transfered the purchases. All my apps show up on the screen now, however they're not highlighted..i can't move or select or sync anything from m
-
Moved my library, need help please
I had loaded my music folder into my iTunes library and everything worked fine. A week ago I bought an external hard drive and moved the folder from the internal hd to the external. What do I have to do so that iTunes recognizes the new songs and del
-
How to install without the disk deskjet 2512
Hello I have recently moved and took printer but not computer. How can I install the printer without the disk.