MacBoor Air is now hanging with various applications, including the Finder

Hi Everyone,
My 2011 MacBook Air is now hanging rather frequently, regardless of program.  Any suggestions?

The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

  • Iphoto hangs on start up so bad that it crashes other applications and the finder

    OK here goes.
    I had several applications running and everything froze so badly that I had to reboot. I eventually worked out that the problem was iphoto. If I leave iphoto closed everything seems to work fine. When I launch iphoto the ap starts to open but no photos appear just a wheel which keeps going round. I left it for a bout an hour but no joy. It seems to mess everything else up including the finder.
    I deleted the ap and all the pkg files as per another discussion and reinstalled but the problem is still there. I seemed to get a little further when iphoto said it had noticed some discrepencies and asked me if I wanted to repair. I said yes it did it and showed percentages up to 100% but then just hung again.
    I started the ap again holding down the option key, created a new library, imported a couple of photos and it seems OK but when I switch back I know the problem will not have gone away.
    I have time machine but I dont really want to go back as Im not sure how long the problem has been there.
    Any help would be greatly appreciated.

    Again, your point is? Do you think Apple (or Microsoft or Adobe or anyone) makes perfect software?
    And you realise that about 99% of apps on the App Store are 3rd party apps, right?
    How on earth can an extra tool be a bad thing?
    iPhoto has tools to tackle some database damage. It can fix some problems. But sometimes the corruption is too serious. So, If those tools don't work: then restore from back up.
    There. That's the Apple way. Fixed. Restoring from a known-good back up will fix pretty much anything.
    However, not every one has a back up. Everyone should. Everyone should always wear a seat belt too. But they don't. They meant to but never got around to it...
    So what then? Well no back up, you option is to recover the Master files from the Library, make a new one and start over from scratch. Lose all your edits, all your albums, keywords and so on. But at least you have a new uncorrupted database and your photos as imported from camera.
    However, one guy noticed another way of doing this. He noticed that you could leverage the sharing system and make a new library but not lose as much data. If the main db has gone west, but the sharing system is intact, then with a bit of luck and his skill in scripting you get a new uncorrupted Library, preserve all your edits and albums and keywords.
    Don't want to use it? Don't. But there's nothing wrong with using a third party app. It's not immoral. It's not an indictment of anything. It's just an opportunity.

  • AIR Publish for iOS Error: Install application on the connected iOS device

    OK, I've been having this issue sporadically for a pretty long time now, I'm talking months if not over a year. Currently I am using Adobe Flash Pro CS 6 on a PC with Windows 8, AIR 4.0.0.1390 SDK installed. Sometimes, when publishing the App and having "Install the application on the connected iOS device" checked I receive the following error message although the iPad is connected with 2.5 GB available:
    "Error creating files.
    Uninstallation Error: Failed to send request to device.
    Device Error: please check if there is enough space on the device."
    I have found absolutely no rhyme or reason for this to occur. Sometimes it will, sometimes it won't, but I just tried publishing with install about four times, having unplugged the iPad, removed the previous App manually, closed the previously installed App, closed and reopened Flash, and it still won't install. Usually I can get it to install after a couple tries, thus dampening my urge to post a thread but I've now been driven to write due to the number of errors.
    Oddly a Google search for "Uninstallation Error: Failed to send request to device." yields no results, am I the only receiving this message?
    I keep hoping that new releases of AIR will resolve this issue but alas, no such luck. Anyone have a fix for this or able to confirm similar frustrations? I am currently using a first generation iPad, but have also experienced similar issues with third generation iPad.

    I'm also getting the error in the post above when trying to publish and install with AIR 15.0.0.302 on an iPAD 2 iOS 8.0.2:
         Error creating files.
         Uninstallation Error: APIInternalError.
         Device Error: please check if there is enough space on the device.
    - and I have 6.3GB of space, so I know that isn't the issue. I'm even attempting to compile a completely brand new (empty) fla, but the error persists. I've also tried to compile an ipa with AIR 14 and receive the same error. Possibly this has something to do with the latest iOS?

  • Flash CS6 AIR error: CreateWinProcess failed with error 2. The system cannot find the file specified

    I created an AIR application in Adobe Flash CS6, but when I test, debug or publish it, an error always occured.
    CreateWinProcess failed with error 2. The system cannot find the file specified.
    When I clicked OK, Flash suddenly stops responding, so I need to end the process using Task Manager.
    I created a blank FLA document and tested and published it, everything's fine there. It was exported properly. But when I do it with the AIR app, Flash can't even start exporting the SWF of the AIP app, and instead gave me the error.
    I speculate that there is something wrong with the Java command line stuff Flash is doing behind the curtain. I tried using ADL myself and get the AIR app working fine.
    I also found out that Flash has its own JRE installed, so I don't have to bother the JRE used by my computer.
    Is there any way to fix this? Thanks in advance. Have a nice day!

    I installed  the update, but I'm sorry to say that it did not solve the problem
    The error is still there as described by Master §ix and Daniel777
    CreateWinProcess failed with error 2. The system cannot find the file specified.
    It happens when trying to test, debug, or publish air applications (AIR 2.5 – AIR 3.4 , desktop, android, iOS)
    In this case, I can't use the simulator to test the applications,
    thanks

  • HT1296 i have an ipad with many application, will the first time sync erase all the data?

    i have an ipad with many application installed on it, will the first time sync with itunes erase all the installed applications on the device?

    The iCloud settings for the computer and other devices are in the iCloud preferences in System Preferences. If you open iTunes with your iPhone connected to the computer, select the iPhone under Devices in iTunes' sidebar, then click on the Info tab in iTunes' main window. Look at the various items you see listed. Be sure to check the Mail component for your GMail account because it is not an iCloud mail account. Your Calendar and Contacts components should state that they are being synced by iCloud.

  • How to create a setup for window form application including the related sql database?

    i have created a simple window form application project that have only 2 form..
    1st one for login in which it'll check the userid n password from database.if both are correct then it will go to 2nd form.
    now i want this project to run in another computer.
    i created a setup file but its showing some error regarding the database instances connection..
    so if anyone can tell me in details how to create the setup file then it'll b a great help..
    thanx in advance..

    Hi,
    Consider the above scenario,I suggest you to use the SQL Server Compact+ ClickOnce Deployment, A Compact SQL database is a file that can be bundled with your application installation. Below is a link guiding you through the creation process of a SQL Compact
    database.
    http://technet.microsoft.com/en-us/library/ms173009.aspx
    The following link discusses setting up the necessary dependencies and prerequisites for SQL Server Compact. (Note, you will need to scroll to the section entitled Private File–Based Deployment.)
    http://msdn.microsoft.com/en-us/library/aa983326(v=VS.100).aspx
    A ClickOnce Deployment can help you publish your application attach compact SQL database into client machine.
    Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Problem with mp3 illustration in the finder since 10.6.8 update !

    Hi !
    since the last update to mac os X 10.6.8 my mp3 illustartions are not present anymore in the finder.... but i can see them in itunes! can anyone help me? it seems to be a bug cause some people with mac os X lion meet the same problem....
    Thanks

    BDAqua,
    Nope. It's very erratic. For example, just now I cycled several times between the inbox and the smart mailbox and even closed and re-opened. The inbox showed messages. Then I quit mail and re-opened, the inbox was empty. It took a couple more cycles of quit and re-open to get an inbox display. But as soon as I got it back on, and then closed or changed mailboxes, it disappeared when I went back to the inbox.
    Hellofa way to run a railroad.
    And just for reference, when I first had this issue last week under 10.6.8, I read several posts on this forum wherein other users had problems with the inbox display. Other than the smart mailbox "fix", I never did find a definitive solution or explanation as to why it is occuring.
    John

  • Saving with a preview in the finder

    Am I doing something wrong when I save Pages Documents? My saved files now show up as a pages logo in the finder instead of with a preview of the actual document like it did in iWork '08. I thought I might be able to do something in the preferences to change this, but nothing seems to work. iWork '08 just did it automatically. Anybody have anything to say on this?

    (a) packages are larger than flat files because
    (1) they use numerous toc on the disk (one per embedded file) while the flat ones uses only one.
    (2) only the index.xml file is compressed while in the flat ones the entire set of components is compressed as a single item.
    (b) in flat files, the preview is 'hidden' in the compressed file so, coverflow can't reach it. At least at this time. Maybe one day it will able to read it from the compressed doc but as far as I know, this would require an 'expand' process which would be severely time consuming.
    (c) at this time, preview files created under 10.5.6 are huge because they are built using the 'better' setting. It's foolish but it's
    Yvan KOENIG (from FRANCE vendredi 27 février 2009 21:46:26)

  • After installing Mavericks my iMac has become increasingly unstable with various applications crashing along with some white screen, kernel panic-style restarts. This has even continued after a fresh install, what should I do now?

    Following an Apple Support Team member's advice, I retrieved as many files as I could and erased and repaired the HD before completing a fresh install from a bootable USB. Once I restored all of my software I set it backing up to Time Machine over night only to find that it had crashed and restarted over night before that had completed. I attach the crash report below:
    Anonymous UUID:       F1CB4D58-C5DE-D8BB-D543-3270C7724738
    Wed Oct 30 21:51:58 2013
    panic(cpu 2 caller 0xffffff80070dc19e): Kernel trap at 0xffffff80071c5e3d, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000001018, CR3: 0x0000000029716000, CR4: 0x0000000000000660
    RAX: 0xffffff81d7fa3740, RBX: 0xffffff80368dc8c2, RCX: 0x0000000000001000, RDX: 0xffffff8027862650
    RSP: 0xffffff81d7fa3720, RBP: 0xffffff81d7fa3770, RSI: 0x0000000000000005, RDI: 0xffffff8027862650
    R8:  0xffffff81d7fa3490, R9:  0xffffff81d7fa348e, R10: 0x0000000000002000, R11: 0x000000000000065e
    R12: 0xffffff80368dc8f0, R13: 0x0000000000000000, R14: 0xffffff80368dc8c2, R15: 0xffffff80368dc8e8
    RFL: 0x0000000000010202, RIP: 0xffffff80071c5e3d, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000001018, Error code: 0x0000000000000002, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff81d7fa33b0 : 0xffffff8007022f69
    0xffffff81d7fa3430 : 0xffffff80070dc19e
    0xffffff81d7fa3600 : 0xffffff80070f3606
    0xffffff81d7fa3620 : 0xffffff80071c5e3d
    0xffffff81d7fa3770 : 0xffffff80071db854
    0xffffff81d7fa37c0 : 0xffffff80071daf60
    0xffffff81d7fa3800 : 0xffffff80071e1fa0
    0xffffff81d7fa3830 : 0xffffff80071d9e8f
    0xffffff81d7fa38f0 : 0xffffff80073611e4
    0xffffff81d7fa3a00 : 0xffffff80073697cb
    0xffffff81d7fa3bd0 : 0xffffff80071fc9db
    0xffffff81d7fa3c30 : 0xffffff80071d544b
    0xffffff81d7fa3cb0 : 0xffffff80071d4da4
    0xffffff81d7fa3d70 : 0xffffff80071c2ebf
    0xffffff81d7fa3f50 : 0xffffff800743de23
    0xffffff81d7fa3fb0 : 0xffffff80070f3e06
    BSD process name corresponding to current thread: backupd
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000006e0
    Model: iMac11,3, BootROM IM112.0057.B01, 4 processors, Intel Core i5, 2.8 GHz, 16 GB, SMC 1.59f2
    Graphics: ATI Radeon HD 5750, ATI Radeon HD 5750, PCIe, 1024 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
    Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
    Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533643465238432D48392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.74.0-P2P
    Bluetooth: Version 4.2.0f6 12982, 3 services, 23 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: Hub
    USB Device: BRCM2046 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Internal Memory Card Reader
    USB Device: Hub
    USB Device: My Passport 070A
    USB Device: Built-in iSight
    USB Device: IR Receiver
    Thunderbolt Bus:

    What else do you need?
    Crashed again overnight during back-up:
    Anonymous UUID:       F1CB4D58-C5DE-D8BB-D543-3270C7724738
    Fri Nov  1 00:25:41 2013
    panic(cpu 2 caller 0xffffff80184dc19e): Kernel trap at 0xffffff80187cf663, type 14=page fault, registers:
    CR0: 0x0000000080010033, CR2: 0x0000000000008014, CR3: 0x000000002b62c000, CR4: 0x0000000000000660
    RAX: 0x0000000000000000, RBX: 0x0000000000008000, RCX: 0xffffff81e9e8bcc8, RDX: 0x0000000000000001
    RSP: 0xffffff81e9e8bc60, RBP: 0xffffff81e9e8bcb0, RSI: 0xffffff8042096108, RDI: 0x0000000000008000
    R8:  0xffffff81e9e8bcd0, R9:  0xffffff81e9e8be70, R10: 0x000000000000064e, R11: 0x0000000000000297
    R12: 0x0000000000000000, R13: 0x0000000000000001, R14: 0x0000000000000000, R15: 0xffffffffffffffff
    RFL: 0x0000000000010202, RIP: 0xffffff80187cf663, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x0000000000008014, Error code: 0x0000000000000000, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff81e9e8b8f0 : 0xffffff8018422f69
    0xffffff81e9e8b970 : 0xffffff80184dc19e
    0xffffff81e9e8bb40 : 0xffffff80184f3606
    0xffffff81e9e8bb60 : 0xffffff80187cf663
    0xffffff81e9e8bcb0 : 0xffffff80187cf310
    0xffffff81e9e8bd00 : 0xffffff80187cea6f
    0xffffff81e9e8bde0 : 0xffffff80185ff47a
    0xffffff81e9e8be50 : 0xffffff80187bf04c
    0xffffff81e9e8bec0 : 0xffffff80187bc6de
    0xffffff81e9e8bf10 : 0xffffff80187bee5a
    0xffffff81e9e8bf50 : 0xffffff801883de23
    0xffffff81e9e8bfb0 : 0xffffff80184f3e06
    BSD process name corresponding to current thread: mdworker
    Mac OS version:
    13A603
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000018200000
    Kernel text base: 0xffffff8018400000
    System model name: iMac11,3 (Mac-F2238BAE)
    System uptime in nanoseconds: 285206678247
    last loaded kext at 264611740123: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7f9a865000, size 65536)
    last unloaded kext at 114432919226: com.apple.driver.AppleUSBUHCI          650.4.0 (addr 0xffffff7f9909b000, size 65536)
    loaded kexts:
    com.apple.filesystems.msdosfs          1.9
    com.apple.filesystems.smbfs          2.0.0
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AppleBluetoothMultitouch          80.14
    com.apple.driver.AGPM          100.14.11
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AppleMikeyHIDDriver          124
    com.apple.driver.AppleHDA          2.5.2fc2
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.kext.AMDFramebuffer          1.1.4
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.AMDRadeonX3000          1.1.4
    com.apple.driver.AppleMikeyDriver          2.5.2fc2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.AppleLPC          1.7.0
    com.apple.kext.AMD5000Controller          1.1.4
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleBacklight          170.3.5
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.driver.AppleUSBCardReader          3.3.5
    com.apple.driver.AppleIRController          325.7
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.4.0
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AirPort.Atheros40          700.74.5
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.driver.AppleBluetoothHIDKeyboard          170.15
    com.apple.driver.AppleHIDKeyboard          170.15
    com.apple.driver.IOBluetoothHIDDriver          4.2.0f6
    com.apple.driver.AppleMultitouchDriver          245.13
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.driver.DspFuncLib          2.5.2fc2
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOAcceleratorFamily          98.7.1
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.AppleSMBusPCI          1.0.12d1
    com.apple.kext.AMDSupport          1.1.4
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleHDAController          2.5.2fc2
    com.apple.iokit.IOHDAFamily          2.5.2fc2
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
    com.apple.iokit.IOUSBMassStorageClass          3.6.0
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOAHCISerialATAPI          2.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.iokit.IOEthernetAVBController          1.0.3b3
    com.apple.driver.mDNSOffloadUserClient          1.0.1b4
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          600.34
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.pthread          1
    com.apple.kec.corecrypto          1.0

  • AIR App now crashes with AIR 15 runtime (did not crash with earlier versions of AIR)

    Hi,
    We've noticed our AIR application now crashes when the AIR 15 (the latest version available from Adobe) runtime is installed.  This did not happen with earlier versions of AIR.  The app does not crash when I debug in Flash Builder so I cannot identify the exact issue.  The app will crash EVERY time when running the .exe on Windows.  The crash happens on Windows XP and Windows 7.  The app does not crash on OS X.
    The message in Event Viewer says:
    Faulting application name: PhotoMambo.exe, version: 0.0.0.0, time stamp: 0x4eb75ae0
    Faulting module name: Adobe AIR.dll, version: 15.0.0.249, time stamp: 0x53fe5c69
    Exception code: 0xc0000005
    Fault offset: 0x0056fcdc
    Faulting process id: 0x3dc
    Faulting application start time: 0x01cfd110de4c8b50
    Faulting application path: C:\Program Files (x86)\PhotoMambo\PhotoMambo.exe
    Faulting module path: c:\Program Files (x86)\Common Files\Adobe AIR\Versions\1.0\Adobe AIR.dll
    Report Id: 49c106e0-3d04-11e4-9219-001c42d9a43e
    Please let me know if you'd like any additional information.  This is such a bummer that an AIR update renders our app useless in Windows.
    Thank you.

    I'm sorry this is happening.  Could you please open a new bug report on this over at bugbase.adobe.com?  When adding the bug, please include sample code or an application so we can quickly test this out internally.  If you'd like to keep this private, feel free to email the attachment to me directly ([email protected]). 
    Once added, please post back with the URL and I'll follow up internally.
    Previous versions of the AIR runtime can be found here: Archived Adobe AIR SDK versions

  • I am using iphone4s with iOS 7 and now I cannot delete applications from the home screen, when I double click the item it didn't shows the'x' button

    Hi,
    I am using iphone4s  & now I updated with ios7 after that I cannot delete apps from home screen.  Earlier when we double click the apps  then it will wiggling & 'x' button will appear now it isn't  so I need  solution for this
    Thanks,
    Binoy

    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

  • Glitches With Various Applications - iMac 10.5.8

    My Photoshop CS 8.0 started quitting at startup after working perfect for years. Re-installed with same problem. Also noticed Garageband will start, but will not come to foreground when other applications are open. Suspect something in the iMac is affecting multiple programs, and mostly concerned about getting Photoshop. Don't know where to look.

    OOPS, me bad, if it's 10.5.8 you need the 10.5 Install Disc to boot from.
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

  • Old mail missing, mail now hangs with 10.5.6

    After completing upgrade to 10.5.6 my email does not work.
    I can't see old messages and it won't connect to servers.

    Use this thread.
    http://discussions.apple.com/message.jspa?messageID=8731455#8731455
    It doesn't work for me but dozens of others have found it successfully fixed their problem.
    I think deleting the preferences mail plist was my error.
    What a **** up for Apple to delete someone's email inbox, outbox, etc. The whole computer is worth less that the loss of this email.
    @#$%^&*()_

  • 3.2.3;Swing app.; Cannot work with two applications at the same time.

    Hi guys,
    I bring this problem here may somebody experienced that.
    I developed two client side applications(applets) with JDev3.2.3.
    Locate them on Apache/Tomcat. There is also a
    Index.html file with two links, so when user clicks on
    each link the associated application will downloaded
    on his/her PC and ready to work. (In index.html I used
    JavaScript function window.open(…) to load the applications)
    Now please see this scenario:
    1-I ran/loaded both application in two separate
    browsers(IE5.5). And tried to work with them(minimized
    one and work with another). Soon I faced unexpected
    frizzing/locking or very slow running on both
    applications.
    2-Then closed/killed one of them(killed IE). Then
    re-executed same application again. The application
    loaded with the last activated screen . Seems it never
    killed and it was still alive.
    3- The only way to successfully working is one by one.
    Means execute & work with one, then kill that, and
    then execute and work with another. Which is not expected
    in the Windows enviroment.
    To Debug:
    When both applications were running(each on it’s own
    IE), I opened the Task Manager and saw there was only
    one IEXPLORER.EXE was running, also there was only one
    Java VM (a little bird icon) on right-bottom of the
    screen.
    I believe this causes the problem. Seems they both
    running in the same session. Since I opened two
    applications in two IE I was expected to see two
    IEXPLORER.EXE with two JVM. Am I right? Do you think
    so?
    Any way, Now I am seeking to find the solution. My
    primary mind says probably I should not use
    window.open(..) in index.html to load the
    applications.
    Would appreciate any command on this.

    Same thing with me! My microphone doesn't even register in anything but ventrilo!
    It's dri'ves me NUTS! I bought the card (xfi fatalty) for a really good price, but I almost regret even looking into the soundcard because of this bug. I know Vista is a new operating system..but I figure'd this kind of update should have been noticed MUCH earlier..
    Please creative, can you fix this?
    On another note..is there a sound quality difference between using an x-fi in vista vs xp?
    *not meaning to thread jack*
    finally..
    you should probably close the other thread.. You made two, you know.

  • SSO for various applications within the same portal

    Is it possible to implement SSO at the application level in an EP 7.0 environment?
    Ex:  One Portal with ESS and BI Functionality (BI is connected to the BI backend, ESS is connected to the ECC backend, but all of it exists within the same portal instance) in which the BI Explorer would rely on SSO, while the ESS would require a logon to the portal.  The initial page of the portal would not be a logon screen, but rather a menu screen
    Does this functionality exist?

    For our purposes, ESS would have to be authenticated (perferably through Active Directory), while BI Explorer wouldn't require "visible" authentication, BUT the question would be, could all of this exist on the same portal..
    I agree that it certainly wouldn't be user friendly to ask users to logon (using AD l/p) for certain parts but not others.  I think the solution would simply to have 2 portal instances (ESS/ECC = Logon/Password,  BI Portal = SSO), and to federate the BI to the ECC Portal. That way, if someone wanted to work in BI and only BI, they could go without logging on, but if they wanted to go to the ESS Portal they would have to logon BUT would be able to use both ESS and BI.
    This all stems from an effort to eliminate the neccessity of having to logon to a portal (for a small group of managers), but still maintaining a level of security for ALL users in regards to employee self-service

Maybe you are looking for