Machine capacity planning and efficency

Dear Guru,
I have number of machines and i want there individual capacity and efficency can we see that by any report or any tcode to see all capacity of machine.What is capacity leveling.
Is thee any configuration for capacity planning.
Thanks in advance

Hi, the following configuration steps involved in the capacity planning: SPRO --> IMG --> PRODUCTION --> CAPACITY REQUIREMENT PLANNING Capacity Requirements Planning: 1) Define time units 2) Define Capacity Category 3) Set up Capacity Planner. 4) Define parameters 5) Define Standard value key. 6) Define Move time matrix. 7) Define Setup matrix. 8) Define Control Key. 9) Define Shift Sequence. 10) Define Key for performance efficiency rate. 11) Define Formula parameters. 12) Specify Scheduling type. 13) Set up Production scheduler group 14) Select Automatically. 15) Define Scheduling parameters for Production orders 16) Define Scheduling parameters for networks. 17) Define Reduction Strategies planned/ production orders. 18) Define Reduction Strategies for network/process orders. 19) Define Control Profile. 20) Define Selection profile. 21) Define time profile. 22) Define Evaluation profile. 23) Define Strategy Profile. You can follow these above configuration steps in capacity planning Yes you need to active your all work center for the finite scheduling at the bottom of capacity view. Use all standard SAP configurations, Capacity Leveling Profile. Define time profile in OPD2. Define the strategy profile in OPDB Define the Overall profiles in OPD0. Then only you need to to active your all work center for the finite scheduling at the bottom of capacity view in work center.(CR02) Then run MRP with scheduling- 2 Lead time scheduling and capacity planning.(MD02) You will get your capacity requirement in CM01, or CM25/CM21. In rem you can use MF50. -
OR refer below steps Capacity Planning Evaluation: Use this procedure to Evaluate the Capacity of a Work Center (Resource). The same transaction will be used for finding out the Capacity Overload on the Work Center Select Logistics -> Production -> Capacity Planning -> Evaluation ->Work Center View ->Load and go to the Capacity Planning Selection screen (CM01) Through capacity planning : Standard overview :System will show week wise overload in Red Color. If there is no overload then system will show in the normal color. Date wise Capacity can be overviewed. If there were capacity overload, system would show with Red Color indication and Percentage overload can be viewed. Through capacity planning : Standard overview: Details: Date wise, planned process order wise capacity requirement. Through capacity planning : Standard overview: Graphical: Yellow Color indicates capacity lying un-used. Red Color Bars is the indication for Capacity Overload and Blue Color Bars indicate for Capacity available Use this procedure to Level / Schedule the Capacity of a Work Center Capacity Planning - Levelling/Scheduling: Select Logistics ->Production->Capacity Planning -> Levelling -> Work Center View and go to the Planning Table (Graphical) screen (CM21) Key Points u2022 This would be used for Shop floor production scheduling u2022 Capacity Scheduling is mandatory for correct results of Master Production Schedule and Material Requirement Planning For settings: Define formulas for resources: (OP54) IMG -> Production Planning For Process Industries -> Master Data ->Resource->Capacity requirements planning->Formulas for resources->Define formulas for resources. For formula parameters for Resource/workcentre:(OP51) IMG -> Production Planning For Process Industries -> Master Data ->Resource->Capacity requirements planning->Formulas for resources->Define formula parameters for resources-> Standard Value u2013 Define Parameters (OP7B) IMG -> Production Planning For Process Industries -> Master Data ->Resource-> General Data -> Standard value -> Define Parameters Define standard value key(OP19) IMG -> Production Planning For Process Industries -> Master Data ->Resource-> General Data -> Standard value -> Define Standard Value First configure the below settings in the capacity Planning. 1) Define time units Path : SPRO ->Production-> Capacity Requirements planning ->Master Data-> Define Time units (OPCF) 2) Define Capacity Category Path : SPRO ->Production ->Capacity Requirements planning->Master Data-> Capacity Data ->Define Capacity category. 3) Set up Capacity Planner. Path : SPRO ->Production ->Capacity Requirements planning -> Master Data->Capacity Data -> Set up Capacity Planner 4) Define parameters Path : SPRO->Production ->Capacity Requirements planning -> Master Data ->Work Center Data->Standard value ->Define Parameters (OP7B) 5)Define Move time matrix. Path : SPRO -> Production-> Capacity Requirements Planning -> Master Data-> Work Center Data -> Define Move time Matrix (OPCN) 6) Define Setup matrix. Path : SPRO -> Production ->Capacity Requirements Planning -> Master Data -> Routing data -> Define Setup Time Matrix 7)Define Control Key. Path : SPRO-> Production-> Capacity Requirements Planning -> Master Data ->Routing data -> Define Control Key(OPCG) 8) Define Shift Sequence. Path : SPRO -> Production-> Capacity Requirements Planning -> Operations -> Define Shift Sequences (OP4A) 9) Define Key for performance efficiency rate. Path : SPRO-> Production -> Capacity Requirements Planning -> Operations-> Available Capacity-> Define Key Performance Efficiency Rate (OPDU) 11) Specify Scheduling type. Path : SPRO ->Production ->Capacity requirements Planning->Operations->Scheduling ->Specify Scheduling Type (OPJN) 12) Set up Production scheduler group. Path : SPRO ->Production->Capacity requirements Planning -> Operations -> Scheduling -> Set up Production Scheduler Group (OPCH) 13) Select Automatically. Path : SPRO -> Production -> Capacity Requirements Planning ->Operations->Scheduling ->Task List Type-> Select Automatically (OPJF) 14) Define Scheduling parameters for Production orders. Path : SPRO -> Production ->Capacity Requirements Planning-> Operations->Scheduling -> Define Scheduling Parameters for Production orders (OPU3) 15) Define Reduction Strategies planned/ production orders. Spro-> Production->Capacity reqirements planning->operations->Scheduling->Reduction strategies->Define reduction strategies planned-/production order 16) Define Reduction Strategies for network/process orders. Spro-> Production->Capacity reqirements planning->operations->Scheduling->Reduction strategies-> Define reduction strategies for network/process order 17) Define Selection profile. Spro->Production->Capacity requirements Planning->Evalution->Profiles-> Define selection profiles Hope clear to u. Regards Alok

Similar Messages

  • Capacity planning and hardware sizing

    Hi,
    I would like to know in detail about capacity planning and hardware sizing while deploying oracle database products. I need to know about properly planning the infrastructure and configuring and deploying the products. Moreover, when should we use RAC,how many nodes, exadata, DR etc. How to size hardwares RAM,Disk for this kind of implemetations.
    I know it depends on budget and environment. Still if anyone kindly give some links/docs I will be able to have a decent start in this domain.
    Regards,
    Saikat

    See , they all depend on your company policy and the database size that they are going to have.
    1. Size : i have worked on databases sizing from 80G to 2000G , all depending on the client or the industry you are catering to.
    2. hardware and Ram : Server Team should know this better , you can have a simple small server if the DB and application are small and the usage would be less. If it a full fledged system with high load then you need to get in touch with your server team and raise an oracle SR for exact specifications for that database and also plan for some future growth.
    3. RAC : depends on the project if it requires such a setup.
    4. DR : is for disaster management. Also all companies implement this by adopting data guard ( physical standby).
    5. For having a good start , start reading the books and refer to oracle documentation. More you refer , more knowledge you will get .
    Start with the basics.... make your basics strong.. and then move ahead with complex setups.
    Regards
    kk

  • Oracle identity Fedration 10g capacity Planning and sizing

    Hi,
    Looking for a capacity Planning and sizing document for Oracle identity Fedration 10g.
    Thanks in advance.
    Thanks,
    Vikalp Sareen
    <telephone information removed by moderator>
    Requests for off-forum communication defeats the entire premise of a public discussion forum. Additionally, do you actually want your telephone number to be harvested by people without scruples or principles and possibly used to steal your identity?
    Edited by: rukbat on Jun 27, 2011 7:40 AM

    Hi Ajay,
    I presume you are talking about this section http://download.oracle.com/docs/cd/E10773_01/doc/oim.1014/b25355/deployinstall.htm#BABHIJGJ . This section does specify the sizing for some deployment scenarios. It is not brief. We cannot propose the hardware configuration for any customer just referencing this.
    Please let me know your thoughts.
    -Mahendra.

  • Capacity planning and levelling

    Hi,
    My client has around 8 different production areas and I have created 8 different order types,production schedulers,capacity planner groups and production scheduling profiles for the same. I have also created a list profile,selection profile, graphical profile, optional profile and an overall profile with my understanding.
    1. I want to see for a given production area, In the morning, the user has to take the list of work centres pertaining to his area and fix priorities. In case he wants to move certain orders to next day and want to insert new orders in place of that, how to do this?
    2. How can I utilise the feature of capacity planning, to evaluate my capacity requirements for new projects?
    3. I want the step by step instructions for doing the capacity levelling both in graphical/tabular forms. Also please explain the purpose of different profiles used for capacity planning like selection,option,list etc.
    Regards,
    Sridharan M

    Dear
    Capacity planning comprises the following partial components:
    Capacity Evaluation
    In the capacity evaluation, available capacity and capacity requirements are determined and compared with each other in lists or graphics.
    You can use capacity evaluations to analyze capacity loads in your company.
    Capacity leveling
    The objectives of capacity leveling are:
    1.     Optimal capacity commitment
    2.     Selection of appropriate resources
    3.     In most applications, you can use two types of planning table (graphical and tabular versions) to display the capacity situation and to carry out capacity leveling.
    4.     In some applications such as Repetitive Manufacturing (PP-REM) or Sales and Operations Planning (PP-SOP), there are application-specific planning tables for capacity leveling.
    The objectives of capacity leveling include:
    u2022     Leveling overloads and under loads at work centers
    u2022     Achieving optimum commitment of machines and production lines
    u2022     Selection of appropriate resources
    Dispatching Operations
    Dispatching operations is the main function of capacity leveling. Operations are dispatched to the time when there is sufficient capacity for them to be executed. You can also dispatch sub-operations and work elements.

  • Capacity planning and schedulng production order based on availabe capacity

    Hi Gurus,
    I am trying to use capacity planning, when the production order is created it takes the order start date as the requirement date. Then when i do he capaity check it says capaity not available. After finite scheduling again it proposes to shift operations by certain days.
    I need the capity to be check in MRP and the palled orders to have start dates based on aviable capity, currenty all the palled orders are starting on the requirement date irresptive of avaiabe capaity. I tried using finite scheduling option in MD02 still it does not take in to account exsting production orders for giving dates of the planned orders.
    Regards
    Abhi

    Dear Abhishek,
    1) This is Std SAP of MRP, only material Av check will be carried out in MRP & create procurement
    Proposals
    2) Capacities will not Checked  ( consider ) in MRP in Std R/3
    3) Your Need can be only met through APO
    Regards
    Madhu

  • Report for calculating capacity utilization and Efficency

    Hi,
    We are following REM in our company. The production line is defined in the production version. While backflushing the production line is called automatically and hence backflushing is done.
    We calculate the capacity utilization by using the formulae.
    Capacity Utilization = (Backflushed Qty/ Available capacity)*100.
    My queries are:
    1. Is there any standard report to determine the capacity utilization of a production line.
    2. Is there any standard report to calcualte the efficency of a production line.
    waiting for reply.
    With regards,
    Afzal

    Hi afzal
    1. you have mentioned ; Available capacity = Std.time per piece * no. of working hrs
    Let me explain with example
    suppose per piece if it takes 10 mins, now according to your formula
    A.C = 10* 24 * 60 = 14400 per day, but which is not correct
    normally if 10 mins/ peice means 6 peices/hr and for 24 hrs 24*6 = 144.
    so it must be A.C =  no. of working hrs / Std.time per piece.
    2. You have mentioned = capacity utlilised = total Backflushed qty per day., which means you are caluculating capacity utilization based on input material.
    3. Utilization = (Avaliable capacity/ Capacity utilised) * 100
    suppose let  us consider Available capacity per day =100
    capacity utilized = 50
    Utilization = (100/50) * 100 = 200%, which is not correct it should be only 50%
    Here my main doubt is why You are caluculating capacity based on input material.
    Please explanin  me you business process and whats the exact requirement so that I can help you out.
    Please check the formulae

  • How to go about capacity planning for storage ?

    Hi Experts,
    How to go about Capacity Planning? For  instance if clients wants to upgrade to new server and new storage and asks us how much additional storage do you need for next 5 years, how can calculate the amount of storage.
    I don't have any baseline info about the server of past years. Where can I start and any scripts you guys use for doing capacity planning?
    Appreciate your help.
    Thank you.
    Sam

    Please see this link:
    SQLAuthority News – Storage and SQL Server Capacity Planning and configuration...
    T-SQL Articles
    T-SQL e-book by TechNet Wiki Community
    T-SQL blog

  • Capacity Planning vs. Capacity Leveling

    My production facility is looking to divide up our shop floor by work centers.  There are about 20 individual work centers that are composed of 10 people each.  Each material we make is divided up into 3 operations which go through 3 separate work centers.  Each operation has a corresponding work center that it goes through.
    Right now we are unsure which program suits our needs better, Capacity Planning or Capacity Leveling.
    Our goal is to measure each individual work center (not the workers that make up the work center).  Each work center has a specific goal involving the number of materials they can produce, whether or not they reached that goal and by how many.
    In a nutshell, we want to be able to measure how long it took each work center to reach their individual goals by the materials they produce.
    This is all about measuring the individual work centers and how efficient they are.  Our goal is to be able to utilize this data within SAP.
    What is the difference between Capacity Planning and Capacity Leveling, and which would better suit our goals?
    Our production facility is not very complicated and we're looking for something simple and basic within SAP to accomplish these goals.
    All help is appreciated.  What would be your recommendations for this type of situation?

    HI
    Capacity evaluation
    In the capacity evaluation, available capacity and capacity requirements are determined and compared with each other in lists or graphics.
    Capacity leveling
    The objectives of capacity leveling are:
    Optimal capacity commitment
    Selection of appropriate resources
    In most applications, you can use two types of planning table (graphical and tabular versions) to display the capacity situation and to carry out capacity leveling.
    In some applications such as Repetitive Manufacturing (PP-REM) or Sales and Operations Planning (PP-SOP), there are application-specific planning tables for capacity leveling.
    T codes for Capacity Planning
    Work Center view - Capacity Evaluation
    CM01 - Load
    CM02 - Orders
    CM03 - Pool
    CM04 - Backlog
    CM05 - Overload
    Capacity Leveling
    CM21,CM22, CM27,CM28.
    Hope it will help u
    Regards
    Anupam Sharma

  • POINTS TO CONSIDERED IN CAPACITY PLANNING

    Dear PP GURUS,
    can any one pl. help me by explaning what r the imp. points to b considered during implementing capacity planning
    thanks and regards
    Raj

    1) You need to maintain work scheduling view for all E parts.
    2) In customizing mainatin the overall profile for capacity planning and assign this to materoal master in work scheduling view.
    3) In production orders and planne dorder scheduling paarmeeter (in customizing) enable the indictore "generate capacity reqs".
    4) Control key in rotuings must have the same indicator checked "gen cap reqs".
    5) MRP must be run to create cacapcity reqs if you are using MRP.
    6) You must be aware about the resources lke work centers and labours. in the capacity you must checked the capacities are relevent to "finite scheudling".
    7) Work center must hace formulas...all sormuals must be relevent for scehduling and capacity requirements.
    for more details go for the SAP help.
    http://help.sap.com/saphelp_46c/helpdata/en/8a/a5a3154adc11d189740000e8322d00/frameset.htm
    If helps rewards points.
    Regards
    TAJUDDIN

  • What is the basic difference between Hyperion Planning and HFM

    Hi GURU'S,
    what is the basic difference between Hyperion Planning and HFM and when do we choose them.

    On a high level the difference is this:
    1. HFM is best for global collection (collecting data from scattered entities), group consolidation and for easily structuring financial reporting (mainly consisting of financial data)
    2. Planning is best for modeling your business, starting from a demand forecast and arriving to capacity planning and finally to financial statements, by utilizing business drivers (non-financial data like volumes, prices, productivity rates etc)
    Of course, differences may be analyzed at several levels down to technical, but the discussion may turn out to be too long, yet adding little value to the question: "when do we choose the one over the other". Bear in mind that your requirements may turn out that you need both.

  • Financial And Capacity Planning Charts

    Hi folks,
    In 4.5 version, wWithin Financial And Capacity Planning when I click on View Chart, no chart is displayed. Error - NO Items to display.
    There are plenty of items with correct financial info.
    Any specific note or config/service to be made for this one?
    Thanks!

    Hi,
    for this can u check whether in customisation u have defined any charting grps for Financial and Capacity.
    Please check for your portfolio the following SPRO path.
    SPRO -> xRPM -> Global Customizing -> Portfolio Depedent settings Define finanacial capacity settings for Portfolio type.
    Here u need to select ur portfolio to check financial charting grps and capacity charting grps.
    I hope this will help you to charts in rpm protal.
    Thank you
    Pramod

  • Capacity Planning for Hyper-V individual host and Cluster

    Hi Experts
    I need to know some basic idea about Capacity planning for Hyper-V which requires Capacity Planning for Hyper-V individual host and Cluster.
    I got attached info on websites but still not clear. Can someone link me to an effective website or help me to calculate the required sizing. W
    Regards Suman B. Singh

    Hi,
    You might want to check out these websites:
    http://www.microsoft.com/en-us/download/details.aspx?id=39057
    http://technet.microsoft.com/en-us/library/dd277865(v=office.12).aspx
    http://technet.microsoft.com/en-us/solutionaccelerators/dd537570.aspx
    Cheers
    Andrew

  • Capacity planning 9iAS/Portal and/or 9iAS

    I've looked all over metalink and otn, and can't find any good info on capacity planning for 9iAS/Portal, or 9iAS in general. #CPU, RAM, etc.
    This is the closest I've gotten so far:
    http://technet.oracle.com/products/ias/install-faq.html
    http://otn.oracle.com/products/forms/pdf/6iscalability.pdf
    Does Oracle just refers customers to their www.oracle.com/consulting ($?) group for this information, or is it documented somewhere that customers can see?
    I understand that for a complex large scale enterprise Portal deployment that it would be necessary to hire consultants for hardware sizing and architecture, but there have to be some free guidelines that would be useful for customers with smaller requirements?
    Thanks,
    Eric D. Pierce
    Information Technology Consultant
    [email protected]
    (916) 278-7586

    This was posted the day prior to our offline discussion. Am still interested in continuing our conversation (via this forum if you'd prefer).
    Have you had a chance to look at the cacheability report that I had sent to you?
    Aside from server clock issue I'd like to know what etags are used and generated by the portal infrastructure.
    This is an important issue for our globalization project.
    Many thanks and hope you're traveling safe!
    Jyotika

  • Capacity Planning me-3600 and me-3800 devices

    Hi everyone,
    Currently I´m looking for information about Capacity Planning in ME-3600 and ME-3800 devices. I need to know about hardware description in detail, thresholds used (cpu, memory, etc), interfaces, queuing, latency and all the related with capacity planning.
    I was looking for this information in cisco.com, but I didn´t find nothing.
    Thanks,
    Jaime Soto.

    Hi Jaime,
    the data sheets may contain what you are looking for:
    me3600x
    http://www.cisco.com/en/US/partner/prod/collateral/switches/ps6568/ps10956/data_sheet_c78-601946.html
    me3800x
    http://www.cisco.com/en/US/partner/prod/collateral/switches/ps10905/ps10965/data_sheet_c78-601950.html
    Riccardo

  • GoldenGate and Veridata Capacity Planning/sizing

    Hello,
    Are there any capacity planning guides available for Veridata and for GoldenGate?
    What are the pertinent metrics to gather to aid in capacity planning?
    Thanks,
    Mac McDermid
    Edited by: user13291419 on Oct 17, 2012 12:55 PM

    I faced below application error after I insert new connection with correct information of golden gate connection and data source connection and click finish.
    Application Error
    javax.faces.FacesException: Error calling action method of component with id form:next
    at org.apache.myfaces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:74)
    at javax.faces.component.UICommand.broadcast(UICommand.java:106)
    at javax.faces.component.UIViewRoot._broadcastForPhase(UIViewRoot.java:90)
    at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:164)
    at org.apache.myfaces.lifecycle.LifecycleImpl.invokeApplication(LifecycleImpl.java:316)
    at org.apache.myfaces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:86)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:106)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
    at com.goldengate.veridata.ui.filter.WelcomeTokenFilter.doFilter(WelcomeTokenFilter.java:61)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
    at org.apache.myfaces.component.html.util.ExtensionsFilter.doFilter(ExtensionsFilter.java:92)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
    at com.goldengate.veridata.ui.filter.SessionUserFilter.doFilter(SessionUserFilter.java:115)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
    at com.goldengate.veridata.ui.filter.AjaxFilter.doFilter(AjaxFilter.java:66)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
    at org.apache.myfaces.component.html.util.ExtensionsFilter.doFilter(ExtensionsFilter.java:122)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
    at com.goldengate.veridata.ui.filter.Utf8Filter.doFilter(Utf8Filter.java:28)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:215)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:172)
    at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:563)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:174)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:879)
    at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
    at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
    at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
    at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
    at java.lang.Thread.run(Unknown Source)
    Caused by: javax.faces.el.EvaluationException: Exception while invoking expression #{addConnectionWizardUI.getNextStep}
    at org.apache.myfaces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:153)
    at org.apache.myfaces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:63)
    ... 39 more
    Caused by: java.lang.NullPointerException
    at com.goldengate.veridata.entity.ConnectionComparisonFormat.(ConnectionComparisonFormat.java:13)
    at com.goldengate.veridata.entity.ConnectionDatatypeInfo.(ConnectionDatatypeInfo.java:63)
    at com.goldengate.veridata.entity.Connection.(Connection.java:84)
    at com.goldengate.veridata.dao.ConnectionDAOWebServices.findByName(ConnectionDAOWebServices.java:222)
    at com.goldengate.veridata.dao.ConnectionDAOWebServices.handleVersionControlInfo(ConnectionDAOWebServices.java:185)
    at com.goldengate.veridata.dao.ConnectionDAOWebServices.insert(ConnectionDAOWebServices.java:144)
    at com.goldengate.veridata.bu.ConnectionManagerImpl.insert(ConnectionManagerImpl.java:73)
    at com.goldengate.veridata.ui.AddConnectionWizardUI.createConnection(AddConnectionWizardUI.java:211)
    at com.goldengate.veridata.ui.AddConnectionWizardUI.getNextStep(AddConnectionWizardUI.java:120)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at org.apache.myfaces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:129)
    ... 40 more
    Your response is highly appreciated.
    Regards

Maybe you are looking for

  • Rebuilding spatial indexing fail after patch 9.2.0.8.0

    Hi! I did apply patchset, and after i did try to set NLS_LANG=American_America.CL8MSWIN1251 sqlplusw ...... SQL> alter index XXXX.YYYYYYYY_g_idx rebuild; -- <- Russian name alter index XXXX.YYYYYYYY_g_idx rebuild ERROR at line 1: ORA-29858: error occ

  • Not able to deploy Analytics.war in Tomcat.

    Hi, I have configured Tomcat v6.0 server with OBIEE. I am able to successfully deploy the xmlpserver.war and login into http://localhot:8080/xmlpserver and able to view the BI Publisher. But tried deploying the analytics.war. It throws the following

  • Select on view

    I have a SQL Report region in which I call a view from another schema.<br><br> SELECT * FROM vw_invoices WHERE invoice_number BETWEEN :P1_INVOICEFROM AND :P1_INVOICETO; [PRE]<br><br> In my particular case, I enter the from invoice number and the to i

  • Legacy files in cs6

    When opening cs5 files into cs6 all the layers are flattened into one un-named layer. When I scroll up and down the layers pallette some of the missing layers become visible, but only while scrolling. The content is not selectable on the page. Some f

  • HT1473 Why won't iTunes import my WMA files when I add a folder?

    I had been using iTunes on a Windows 7 machine, and it would import WMA files with no problem.  I decided to move to iTunes on my MacBook Pro, and iTunes will only import the files that are already in mp3 format.  It just ignores the files that are i