Mackbook will get to loading screen but will not load

hello, my mackbook whenever i tturn it on will go to the gray loading screen and just stop. it looks like it is trying to load but it doesn't. Help please!

The same thing happened to me too, yesterday. I think the hard drive is probably shot, which is what you said also, so what did you do to your computer? Did you install a new hard drive? That's what I'm thinking of doing, and if you did, where did you get the new hard drive and how much was it?

Similar Messages

  • I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD.

    I do video productions for a small local TV station. I use Final Cut Express to edit. I need a new video camera but am at a loss as to what to buy. I know I will get a digital camera but do not know the difference between just digital and digital HD. Also, I can not afford an expensive camera and need some advice on which of the available cameras would be best and also work well with a Mac. One last issue, I currently use a Panasonic #CCD camera that takes a tape. When I load video to Final Cut the audio and video are out of sinc. Go figure. Can anyone help with these questions. Karen

    Hello Karen,
    If you are using Final Cut Express, then look for camcorders that are AVCHD camcorders.  Look especially for the AVCHD logo and specific mention of AVCHD in the specs.  Most of the major manufacturers produce good quality camdcorders - Canon, Sony, etc.
    Also, be aware that there are a lot of "not quite AVCHD" camcorders on the market (sometimes they say they record video as MPEG4-H.264/AVC) - buyer beware!
    Most everything you are going to find on the market today is HD, which stands for "high-def".
    Regarding your question about the Panasonic camcorder, it's best if you post that as a separate question, and please identify the specific model camcorder and the Easy Setup you are using in FCE.

  • My macbook pro (early 10") is stuck at gray apple loading screen but will not go further.

    I've done start-up in safe-mode but it just shuts down afterward. What should i do?

    Try Safe Mode first ...
    Startup your Mac in Safe Mode
    A Safe Mode boot takes a longer than a normal boot so be patient.
    Once you are in Safe Mode, click Restart from the Apple () menu.
    If you can't boot into Safe Mode successfully, insert your install disc so you can verify and repair the startup disk using Disk Utility.

  • I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have, it conects to my itunes and computer, but just won't get passed the logo..what can i do? :/

    I have an old ipod touch which won't go past the Apple logo, all it does is show me a loading symbol, but will go no further, i have tried restoring it and i have been successful. It connects and is recognised by my itunes and computer, but still after restoring it, it just won't get passed the logo..what can i do? what is the problem?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • TS1702 App Store shows I have 2 updates, but when I go to App Store it won't load the updates screen but will load all other menus.

    App Store shows I have 2 updates, but when I go to App Store it won't load the updates screen but will load all other menus.

    I have the same problem.  Closed App Store after double tapping Home button twice. I tried logging out of App Store and back in. Also did App Store updates in computer and updated everything when i synced iPhone with iTunes. Nothing works. App Store updates still frozen in iPhone.

  • Iphone5 will go to starter screen but then will turn off and then repeat

    iphone5 will go to starter screen but then will turn off and then repeat

    Howdy AJBA,
    Thanks for using the Apple Support Communities.
    To troubleshoot this issue where your iPhone will get to the Apple logo and then restart again, please follow the directions outlined below.
    If your device gets stuck during startup
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Get more help
    If you still need help after trying the steps above, contact Apple Support.  
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Take care,
    Alex H.

  • My ipod touch 5 is frozen on the lockscreen and i cant do anything except restart it and that doesnt hekp. will getting a new screen help? or is there another, less exspensive way? also, it is not connected to wifi.

    I need to fix my ipod and i don't know how, i am hoping that if i leave it alone over night that it will fix itself,
    its on the lock screen and i cant do anything with the screen, i tried restarting it and it didnt work, so because i restarted it, it is not connected to wifi.
    please help.
    will getting a new screen help? or is there an easier, less expensive way?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • My iPhone 4 is no longer chargeable. Whenever I connect it to the charge, the charging icon appears on screen but even if you leave it for a night the icon will remain on the screen but there will be zero percent. I tried five different charges and plugs

    my iPhone 4 is no longer chargeable. Whenever I connect it to the charge, the charging icon appears on screen but even if I leave it for a night on charge the charge icon will remain on the screen but there will be zero percent of battery. I tried five different charges and plugs [ one in the apple store], same result. Any suggestions please?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • Mouse Scrolls up on software screens, but will not scroll down

    My wired apple mouse will scroll back up a web page or other software screen but will not scroll down using the finger tip scroller ball - any ideas on how to make it work properly again?

    alcohol and air treatment from old post worked...

  • Before starting fire fox I can use the mouse to highlight my desk top icons. After ffox is loaded the mouse will point to the icons but will no longer high light them. When I click it just opens the icon.

    # Question
    before starting fire fox I can use the mouse to highlight my desk top icons. After ffox is loaded the mouse will point to the icons but will no longer high light them. When I click it just opens the icon.

    To attempt a new chat session...
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    http://helpx.adobe.com/x-productkb/global/service1.html

  • My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

    My iphone will not sync to itunes. It will connect to the computer but will not show up anywhere in itunes. PLEASE HELP!!

    Hey there Kellee,
    It sounds like the device drivers for your iPhone are working in Windows, but the phone is not showing in iTunes. You should be able to get that showing again with the steps in this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Start with these three steps, and there are more in the article if you need them.
    1. Update iTunes
    Check that you have the latest version of iTunes installed on your computer. In iTunes, select "Check for updates" in the Help menu.
    2. Check the USB cable
    Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
    USB cables that are bundled with third-party products or accessories might support only charging those products (and not transmitting data) or they might work only with the product with which they were sold. Using one of these cables to sync could cause issues. If you are using a third-party case, such as an extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
    3. Verify that Apple Mobile Device Support is installed
    iOS devices require Apple Mobile Device Support, which should be automatically installed with iTunes. To verify whether it is installed, follow the steps appropriate for your Windows operating system below.
    Windows XP: Click Start and choose Control Panel. Open the "Add or Remove Programs" control panel and verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    Windows Vista and Windows 7: Click Start and choose Control Panel. Click "Uninstall a program" (or if using Windows Vista's Classic View of the Control Panel, click "Programs and Features"). Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    Windows 8: Move the cursor to the upper right corner, click the magnifying glass, type Control Panel,and press Return. Click "Uninstall a program". Verify that Apple Mobile Device Support is visible in the list of currently installed programs.
    If Apple Mobile Device Support is not listed, remove iTunes, QuickTime, Apple Software Update, Apple Application Support, and then reinstall iTunes. Follow the steps appropriate for your Windows operating system below:
    Reinstall iTunes for Windows XP
    Reinstall iTunes for Windows Vista, Windows 7, or Windows 8
    If after reinstalling iTunes Apple Mobile Device Support is still not installed, follow steps in Trouble installing iTunes or QuickTime for Windows.
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    My iPod touch is synced to my old Mac and I have a new PC. Now when I plug my iPod into the new computer it will make the connection sound, but will not show up in my iTunes. I do not care to have the content copied over. Any suggestions?

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

    When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi  using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

    It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
    I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
    Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
    To answer your questions,
    1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
    2. Make sure the two iPhones have different names to reduce sync/restore issues.
    3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
    Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
    Let me know if you need any more tips for iPhoning across the pond.

  • TS3408 why will some websites which loaded fine before now not load - when other favourites load fine, and new searches are fine?  This only affects 2 websites, both of which were bookmarked.  I have removed them as bookmarks and this makes no difference.

    why will some websites which loaded fine before now not load - when other favourites load fine, and new searches are fine?  This only affects 2 websites, both of which were bookmarked.  I have removed them as bookmarks and this makes no difference.

    From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Caches/com.apple.Safari/Cache.db
    Click Go then move the Cache.db file to the Trash.
    Quit and relaunch Safari to test.

  • Put in a CD from a textbook for school...it will bring up the files but will not play the CD... what do I do?

    Put in a CD from a textbook for school...it will bring up the files but will not play the CD... what do I do? Need fast help please!!

    If it's a windows only dvd you'll need windows. i don't think you want to go to the trouble of installing windows on your mac right now. Don't you have a friend or relative who will let you use their windows computer?

Maybe you are looking for

  • XML File in Solution Manager

    How to Generate XML file in solution manager for EHP5 upgrade

  • The refresh icon is not appearing in the customize box for the toolbar

    I went to View...Toolbars...Customize, but do not find the option "refresh" available to install on the toolbar...is there another place I should be looking for the "refresh" option?...thx

  • Signal problem in new update 141 for a7000

    Since update from 137 to 141, i have 1 problem with my a7000, data connection is to easy to swith from hsdpa to edge, data connection not stable, many user from indonesia feel this problem, i hope next update be better

  • Access Material Master from ECC 6 via PI

    Hi everyone, I am very new with SAP PI. I hope someone here could give me a guidance. I am trying to access the material master data from ECC 6 via SAP PI using web service. Is there any document for step by step instruction that I could follow? It i

  • Install disk 1 + wireless mighty mouse

    when i re-boot using install disk 1 the process comes to a stop when it comes to the graphic showing how to put the batteries in and switch on the mighty mouse,there is just the spinning disk at the bottom of the screen.after alot of trial and error