Macpro with a Samsung Syncmaster 930B... Any Problems?

Greets,
I want to buy a macpro.
I will be using it with a samsung syncmaster 930b.
Anyone running the macpro with a samsung lcd? any problems?
Any input or information is appreciated.
Ibook G4   Mac OS X (10.4.8)  

The Samsung Syncmaster 930b will work just fine. I have exact the same screen on my Mac Mini. On my Mac Pro i do use now 2x a Samsung Syncmaster 206bw (20 inch) and those are also working perfect. All the Samsung screens will work fine on the Mac Pro.
Before i had my new 20 inch Samsung screens i used the 19 inch screen. Worked perfect.

Similar Messages

  • I cant open many website with firefox, there say filter not let open this site, but when i open they with internet explorer not have any problem.

    i cant open many website with firefox, there say filter not let open this site, but when i open they with internet explorer not have any problem.

    Could you post an example of the filter message?
    This article has more information on the filters built in to Firefox: [http://www.mozilla.org/en-US/firefox/phishing-protection/ Firefox Phishing and Malware Protection].
    It's possible that you also have a Firefox add-on, or external software, that is filtering what you see. However, we don't have enough information to help identify it yet. If you want to review a list of your add-ons, you can find them under: Help > Troubleshooting Information.

  • HT1386 i tried to sync my ipad to my itunes using usb but it will say not charging,, i can sync with my ipod touch without any problem... please help..

    i tried to sync my ipad to my itunes using usb but it will say not charging,, i can sync with my ipod touch without any problem... please help..

    From http://support.apple.com/kb/HT4060 :
    The fastest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
    iPods need less power to charge them (their wall charger is half the power of the iPad's, 5W as opposed to 10W), so are more likely to charge via USB

  • MSI G31M3 and Samsung SyncMaster 943NWX resolution problem

    hi.today i bought a new computer.i.e assembled.i have a MSI G31M3 motherborad and Samsung SyncMaster 943NWX 19" inch monitor.The box in Samsung SyncMaster 943NWX 19" inch monitor says that it has 1440*900 high resolution.I also know that it must have that much max resolution,thats why i bought this monitor.But the problem is that in desktop->setting.There is not any 1440*900 resolution to select.
    First there was resolutions from 800*600 to 2080*XXXi forgot.But there wasn't any 1440*900 resolution to select.Not even in the range of 1440.There was only one 1400 range.Then i installed the driver came with the monitor and now the settings shows only resolution upto 1280*768.
    So can anyone tell me whats going on?I search the net for this problem but has no luck.one guy was says to use Powerstrip tool but i have no luck.Though the powerstrip tools shows that my monitor has 1440*900 max resolution in its info section but the resolution doesn't show up in resoultion select range.So i guess my monitor is correct.
    My question is that is it due to internal graphics that does support this resolution or something else.Please help me to solve this issue.

    thankx a lot "NovJoe".I installed the intel.inf driver provided in the motherboard.I also installed the graphics accelerator/driver came in the CD and also driver downloaded from the intel site.Both look same driver.But no luck.And what do u mean by "intel 945G onboard graphics driver"?I guess  i have intel g31/33 graphic accelerator.do i need to install intel 945G onboard graphics driver as well? I have searched the net but can't find anyone with exact problem.There was one guy with similar problem but there is no solution.
    Do you think this is a driver a problem?May be following link will help u to get some idea
    http://article.gmane.org/gmane.comp.freedesktop.xorg/28102
    http://www.avsforum.com/avs-vb/showthread.php?t=961716

  • Lenovo T60 - External Monitor Samsung SyncMaster 213T 1600X1200 problem

    Hi All,
    I have my monitor (Samsung SyncMaster 213T) hooked up as an extended desktop to my T60 (directly, no docking station). I'd like to use my monitor at its full resolution of 1600X1200. (It works in this resolution fine with my desktop and my other laptop a sony Vaio). When I set the monitor to 1600X1200,  the screen is displayed compressed with black bars on either side of the monitor.I tried updating with the latest driver for the monitor but still the same results.I'm copy-pasting the information below from the Intel graphics settings tool below. Any help in this regard would be greatly appreciated.
    Intel(R) Graphics Media Accelerator Driver for Mobile Report
    Report Date:        09/03/2008
    Report Time[hr:mm:ss]:    07:25:18
    Driver Version:        6.14.10.4860
    Operating System:        Windows XP* Professional, Service Pack 2 (5.1.2600)
    Default Language:        English
    DirectX* Version:        9.0
    Physical Memory:        3062 MB
    Minimum Graphics Memory:    8 MB
    Maximum Graphics Memory:    224 MB
    Graphics Memory in Use:    11 MB
    Processor:        x86 family 6 Model 14 Stepping 8
    Processor Speed:        1662 MHZ
    Vendor ID:        8086
    Device ID:        27A2
    Device Revision:        03
    *   Accelerator Information   *
    Accelerator in Use:        Mobile Intel(R) 945 Express Chipset Family
    Video BIOS:        1313
    Current Graphics Mode:    1024 by 768 High Color (60 Hz)
    *   Devices Connected to the Graphics Accelerator   *
    Active Notebook Displays: 1
    *   Notebook   *
    Monitor Name:        Plug and Play Monitor
    Display Type:        Digital
    Gamma Value:        2.20
    DDC2 Protocol:        Supported
    Maximum Image Size:    Horizontal: Not Available
                Vertical:   Not Available
    Monitor Supported Modes:
    640 by 480 (60 Hz)
    800 by 600 (60 Hz)
    1024 by 768 (50 Hz)
    1024 by 768 (60 Hz)
    Display Power Management Support:
        Standby Mode:    Supported
        Suspend Mode:    Supported
        Active Off Mode: Supported
    *   SDVO Encoder Report   *
    ** Encoder 1 **
    Vendor ID:    Chrontel
    Device ID:    60
    Device Revision:    6
    Major Version:    1
    Minor Version:    1
    * Other names and brands are the property of their respective owners.

    Your laptop graphic is not detecting your screen properly, install the driver disc included with your screen.

  • 10.3.9 Server with 10.4.x clients: any problems?

    I'm thinking of upgrading our clients from 10.3.9 to 10.4.6 (fresh install), while keeping the server on 10.3.9. The server is used as OD-Master, Mailserver, DNS, DHCP and Netboot (only for installing).
    Are there any experiences, hints and problems?
    Thanks a lot
    Gerd
    XServe G5   Mac OS X (10.3.9)  

    I did this exact thing. Corrupted imapd.conf. Corrected by restoring imapd.conf.default (or whatever it's called) via cp imapd.conf.default imapd.conf. Then I had no users. Was told to rebuild the cyrus database.
    Although I was running the 10.3.9 server, I was directed to kb article #107996. I followed those steps, saw no errors during the rebuild process and all the users reappeared with their mail.
    I note that kb article #301694 simplifies the process for Server 10.3.9 - don't know if that works or not as I did the process for Server 10.3 - 10.3.8 on the direction of an Apple Care specialist.

  • Premiere Pro CS6 does not recognize USB PnP Sound device connected  to iMac OSX even when activated in Audio MIDI setup. The iMac(i-7 processor,16 GB)   is working with this USB device without any problem

    Premiere Pro CS6 does not recognize the USB PnP Sound device in order to produce a commentary sound track. The USB device has been activated on the iMac OSX by using the Audio-MIDI-setup and is working correctly with the iMac. When opening > presets >audio hardware I can only select between >standard >out  integrated > digital input integrated >microphone integrated. USB PnP is not indicated at this place.
    With the built-in microphone of the iMac I can produce the commentary sound track, but I would prefer a stand alone version for better quality.
    Your help is highly appreciated. Thanks in advance, Annemarie!

    I'm using a Logitech Webcam Pro 9000 (which has a microphone on the side). I have several other devices plugged into separate USB slots: a keyboard, a mouse, my iPhone, and a Roland keyboard midi controller.
    I've considered that maybe the webcam/mic combo is the culprit. If USB doesn't work at a constant speed, that could very well be causing the issue! The sound begins to lag badly sometimes when it's working properly, so that there's a multisecond delay between speaking and hearing my voice repeated back over the mic which is another sign that something is wrong. I've also caught it making a strange electronic sound during its "hang" time once it stops taking sound input correctly.
    Maybe I should try to use line-in and forgo USB altogether then. I think I'd need a preamp and some sort of converter for that since the Mac Mini lacks a powered mic jack. I'm only a newbie musician so I've never set up such a system but it might be a better solution in the long run.
    I'll check to see if it hangs before or after my computer enters suspend mode, that's a good suggestion too. Thank you for your help!

  • MacMini looks terrible with Samsung SyncMaster 225BW

    I have the latest Mac working with a Samsung SyncMaster 225 monitor, and the font aliasing look terrible! Is there anything I can do about this? I have gone through the colour calibration and it is slightly improved, but it still looks pretty poor.
    I have connected this monitor to a PC and the font display looks good, except for Apple's webpages (such as these discussion forums)! What fonts are used here? And why do these look so poor on this 22" 1680x1050 DVI connected TFT monitor?
    Any clue would be appreciated?

    Thanks for the reply. I think it is half and half, the problem is both Apple and the Samsung. I believe the graphics adapter (Intel GMA 950) in the MacMini is pretty poor and what you said about Apple's font smoothing... and I think the actual Samsung panel is somehow not good with this adapter.
    I tried the MacMini on an NEC 21" and it looked better, and I also tried it on a BenQ 24" and this was pretty good. I also have a iMac 24" and whatever panel they use in that, the fonts, etc looks pretty **** good!
    So there must be something going on with the Samsung 225BW and the Mini itself! (Although, to be honest, my NEC 1770NX 17" LCD monitor is not giving that good a display at the moment!)
    Is there a way of updating the driver for this Samsung (or this NEC 1770NX) monitor?! Are we all stuck with whatever driver the Mac uses when it detects the display?

  • MacMini mid-2011/ Yosemite w Samsung Syncmaster monitor

    Hello all.
    I have been happily working with my MacMini mid-2011 (2.3Ghz Intel Core i5, 8GB RAM) with a Samsung Syncmaster B2440 HDMI-connected to it for a long time.
    Since the upgrade to Mavericks and later to Yosemite, the following problem occurs: when switching the monitor off, and later switching it back on, no video signal is sent to the monitor, which remains blank and tries to switch through all its different inputs. Unplugging the hdmi cable and plugging it back in also gives no joy. It looks like the whole video output services are switch off at OS level or something.
    The only thing I can do to get the monitor on, oddly enough, is to connect to the mac mini through a remote desktop from another device, and switching the display to my AppleTV. This action does switch also the Samsung monitor back on.
    So I then thought, great, I will create myself an apple script and a workflow associated to this AirPlay monitor switch and associate it to a keyboard shortcut, but this does not appear to work either (no, the shortcut is not in conflict with any other global shortcut).
    Any help will be much appreciated.
    Thanks
    Joe

    Hi lllass.
    When I tried that it appeared to work, but after some days it started doing it again. I am really puzzled by this.
    Thanks
    Joe

  • Hello, I am interested in buying this week of a mac mini 2011 with intel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster933HD monitor. How would it look better with the hdmi-dvi connection or a built-in display adapter port-vga

    Hello, I am interested in buying this week of a mac mini 2011 withintel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster 933HD monitor. How would it look better.... with the hdmi-dvi connection built in, buying a HDMI 1.3 cable and HDMI-making or buying an adapter hdmi display port - vga and connected through the port thunderbolt
    Thanks

    I originally set up my mini with the included HDMI -> DVI adaptor to connect to a Sycmaster monitor. The graphics were very good.

  • MacBook Spring 2010 Snow Leopard won't work with External Samsung Monitor

    Hi,
    I have a MacBook I purchased about a month ago and it's not working with my Samsung SyncMaster 940 BW. I am using Mini DisplayPort out with a Mini DisplayPort-to-VGA adaptor which goes into my SyncMaster Monitor. I have tried rebooting, and also playing around with my laptop resolution, but otherwise I have no idea what to do about this.
    I've read on the discussions that this is a known Snow-Leopard issue but I thought I might post to see if this has been resolved. I run all the updates but the monitor still isn't working?

    A better place to post would be in the The MacBook Pro Display (2008 and Later) forum:
    http://discussions.apple.com/forum.jspa?forumID=1294

  • Imac 27" won't detect samsung syncmaster dvi

    A couple weeks ago I bought my first mac.  iMac 27" 2.7 GHz.  Before that I had a custom built pc with a Samsung Syncmaster T260HD hooked up through DVI.
    Today I mini-display to DVI adaptor in attempt to connect my samsung and use it as an external display.  It isn't working.  Everything is connected properly and the monitor is on and set to DVI.  I go to the system pref menu and hit detect displays and nothing happens.  One thing that I have noticed it that when I switch to DVI on the monitor it goes for a sec and then basically falls asleep.  It is still on but nothing goes up.
    My computer is also fully updated and I've tried restarting it.
    Please HELP!
    Thanks

    bump.
    Just bought a new adapter and it still doesn't work.

  • Samsung Syncmaster 151MP

    Hi,
    does anyone know if the apple Tv will work with a Samsung Syncmaster 151MP monitor/Tv ???
    Thanks

    It would be better if someone who actually had one of these displays could give you their experience.
    In the event that no one comes forth it is my opinion that you can use the display with the tv via component connection. I'm not actually sure how the display will handle a 720p connection from the tv, I assume it will downscale the picture to its own resolution of 1024 x 768, but at worst you may find yourself using the tv's 480p or 576p outputs (but I'd guess not)

  • HT201442 my iphone 5 is saying 'Activation Required' and ive had ios7 since it came out and never had any problems using it. how can i fix this ?

    someone help me fix my phone i have had ios7 since it came out and it has randomly come up with 'Activation Required' never had any problems with the iphone so how do i fix this ?

    Were you, by chance, running a beta version of iOS 7 on your phone?
    If so, this will be the problem. You will need to log Into the private developers forum at https://developer.apple.com/support/ios/
    If you are not a developer, you will need to seek help by way of your favourite search engine.

  • Problems with samsung syncmaster 173v

    hi i got msi geforcefx 5600 [128mb] vtdr version ... anyway i also bought samsung syncmaster 173v LCD monitor ... but the strange thing is there are more contrasts on the sides of the LCD then the middle ... it is like that all non-windows and games ... i dont understand why and LCD cant adjust this ... for example if i change the desktop to plain color black ... i can see the difference between the middle and sides easily ... all the system is well setup so it is either the agp card or the LCD ... i went to the store and they give me the chance to test a new LCD (same one) with my PC and it turns out to be the same ... i contact to the samsung on their website (which they didnt respond) ... is there a firmware update or something like this ... pls help me ... it is the first time i am using a LCD and i guess it was not such a good idea to give up CRT :( ... btw my system is
    pentium 4 - 3ghz (HT)
    msi geforcefx 5600
    asus pc4800 mobo
    and the rest is not related with the problem i guess ... let me know any missing info about the situation ... regards to all

    I recommend you get on samsung.com and look for chat.  I just finished spending about a hour with them about another model and covered a series on difficulties.  I was surprised to find out on their website that my Samsung LCD TV was not covered by any warrantee!  (It really is tho - but the site says "No".)   Just one of many surprises that they are still working on.  The other big deal is figuring out the software upgrade function.  Good luck!

Maybe you are looking for