Macro 'Target stock level (BW)' is inactive

Hi Experts
I got an error in a background job "Macro 'Target stock level (BW)' is inactive"
Kindly help me how to resolve it
Thanks
Samurai

Hi Samurai,
As the error suggests that macro is inactive - Can you please check the macro in corresponding planning book/data view in Macro Workbench in transaction /SAPAPO/ADVM
Check there if the macro is inactive (Red Mark) - If inactive, then please activate the same and then check the background job by running it again.
Hope it helps.
Regards,
Alok

Similar Messages

Target Stock Level ( Method 1 - Time Dependent) in SNP

Hi Guys,
I am not able to use the Target Stock level method 1 ( Time Dependent Target Stock level method ) in SNP heuristics. Ideally if I assign the above target stock method for a particular Product Liocation combination, I should get he keyfigure row ' Target Day's Supply' editable when I open the planning book and select the above Product Location combination in the shuffler, by which I can manually enter the target day's supply for any bucket. But I am getting it greyed out and not editable.
Pls help.
Thanks
Ameet

I am hoping you have ensured that in planning book design the key figure is defined as editable. Make sure that while designing the planning book, you copy the SAP standard planning book while configuring the target stock level method.

Replenishment upto max. stock level during SNP heuristics run.

Hi Experts,
As per the requirement from client, we need to configure the setting of replenishment upto max. stock level during SNP heuristics run.
I am using below settings in R/3 for achieving the expected results.
(R/3 ) MRP1 u2013
Lot size                       HB               Replenish to maximum stock level
Maximum stock level      20,000
(APO) Targ.Stk Lvl Methd   5 u2013 in APO u2013 product master -   lot size tab.
Still, after heuristics run, the requisitions are getting created equals to forecast value. It should get generated as max. stock level maintained.
Could anyone share their experience regarding this? Am I missing some additional setting?
Inputs are highly appreciated!
rgds/Jay

Dear Jayprakash ,
If the requirement is that you have to replenish upto a certain stock level then instead of maintaining the Max Stock level you can simply maintain
SB : Safety stock from product master
and in the Safety stock field maintain the quantity as desired ( in this case 20000 ) . This probably will solve the problem in your case . You may not require to maintain Max stock level .
Target stock level in heuristics also works fine with the following settings
make sure you maintain
Target stock level method as =5
In Maximum Stock level = maintain the quantity desired ( 20000 in your case say )
do not maintain any safety stock method keep it blank .
then location heuristics generates PR according to the the maximum stock level.
If still it is not working plz let me know what other settings you are maintaining probably we will find a way out .
Hope it helps .
Thanks
Debsankar

Max stock level as safety stock from material master while running SNP Heuristic

Hi Experts,
Our user wants to consider max stock level as safety stock from material master while running SNP Heuristic, not the actual safety stock.
Is there any possibility for this setup?
--Kishore

Hi Kishore,
With the given details I suggest that the user can maintain the max stock level values directly in safety stock field of the material master for all materials to be planned by SNP heuristic (keeping the max stock level field blank). Then this safety stock field (which has actually the max stock level values) will update the safety stock values in APO product master and in turn can be considered for SNP heuristic.
Note: The max stock level field in APO product master is used by SNP heuristic only when the target stock level method is maintained as 4, 5 or 6. Since your requirement is to use max stock level as safety stock, so it does not look like that you will be using these target stock level methods or the max stock level field in R/3 and APO. So, this can be left as blank in both R/3 and APO.
Please let me know if this helps.
Regards,
Umesh

Hide attributes based on stock level

How can I hide the attributes of a drop down based on their stock level? I would like to hide all of them that are out of stock.
==
John

Hi,
You should add something along this code snippet to the end of your product large layout. What this does is it uses the 2 tags - tag_attributes_json and tag_instock_json to work out which attributes have 0 stock, find them in the drop down and hide them. The only thing you would need to work out is how to target the elements themselves, this may vary depending on your page structure, so $('.catProdAttributeItem select option[value="' + attributes.variations[key].optionIds[0] + '"]').hide() might need to be changed accordingly.
Here is the code snippet:
Object.prototype.getKeyByValue = function (value) {
    for (var prop in this) {
        if (this.hasOwnProperty(prop)) {
            if (this[prop] === value)
                return prop;
attributes = {
    tag_attributes_json
stockers = {
    tag_instock_json
for (var key in attributes.variations) {
    if (attributes.variations.hasOwnProperty(key)) {
        if (stockers.byVariation[key] == 0) {
            console.log(attributes.variations[key].optionIds[0]);
            $('.catProdAttributeItem select option[value="' + attributes.variations[key].optionIds[0] + '"]').hide()

Inventory Report for current stock and Safety, Minimum etc stock levels

Hi,
Is there any report available to view the current stock against the minimum, safety stock levels so that the user can plan further actions accordingly. Can anyone please guide me on this.
Thanks in Advance.
Regards,
Laxmi

Hi Shailesh,
Is there any way we can include some extra fields into this MC.9 report - i tried but could not find anything. Can you please help.
Regards,
Laxmi

Report from system on different stock levels-min, max stock levels

hI gURUS,
Is there any Standard Report from SAP system to see on different stock levels-minIMUM stock, maximum stock levels

Hi,
MMBE will not give stock level min and max that is maintained in material master MRP view. I think you need to make a z report for th same or may be through query.
Regards
Sangeta

Restrict PO based on the maximum stock level qty in MMR

Hi
We have maintained Maximum Stock level in MRP1 in Material Master. Is there any facility which can restrict the Purchaser, not to raise any PO more than maximum stock level qty which is maintained in Material Master ??? how to do ?
Is there any user exit or warning mesge settings?
Edited by: Jayakumar Raju A.S on Jan 13, 2010 8:55 AM

If you want do such check then you have to do that in a userexit.
I am personally the opinion that a purchaser does not extend the PO quantity just for fun. Maybe he gets a better price if he procures a little more. It is probably a lack of training and knowledge about each others work, that a buyer does not understand what the maximum stock level is , and the planner may not understand the particular issues a buyer deals with daily.
Bring those two together an let they explain each other the reason for the maximum stock level and the reason why the order quantities are changed. Maybe they will finally change the maximum stock level, maybe the buyer will not change the quantities anmore without discussing it first with the planner......

Customer consignment stock- REPORTING stock level & goods depatched

Hi all
I'm looking for a report (or reports) which shows the following (bare in mind that this will all be customer consignment stock):
- the delivery numbers
- the previous month's stock level
- the quantity of goods despatched the following month with a rolling calculation
- monthly invoice values
- remaining stock levels (after current months goods have been issued and invoiced)
I'm aware that MMBE/ MB58 shows the current stock levels, however I'm hoping there is a report in SE16 which shows it as a report structure.
I understand that this is a lot of info requested by myself however any information would be appreciated.
Thanks
/ Vicky

Dear tortyv,
As per my understanding of the requirement,
You please check the "VL06" report if it satisfies your requirement you enter the execution parameters and execute.
System will give the list of out bound deliveries. Select one of those and click the details icon (ctrlshiftf3) according to the item view or headder view.
If it does't suit you have to go for z report.
I f you want that please provide the input fields in order to fetch the required data for the report.
Thanks&Regards
Raghu.k

Maximum Lot Size & Maximum Stock Level

Hi All,
In MRP 1 view we have Max Lot Size & Max Stock level, how the system give me requirement if i'm maintaining these fields.
Regards
Ashok

Hi Ashok,
If you mainatain Max lot size system will check for this qty & it will not allow to generate PR or planned order more than this qty in MRP run & Max stock level is the stock for replinshment where lot size if replinishing.
Regards
Rang

Goods Issue to increase the stock levels in a plant

Folks,
I am not a MM guy and I am trying to increase the stock levels in a plant using a Goods issue.
1.     Can I do the Goods Issues without reference to a Purchase Order? If so, how can I do this
2.     What are the relevant movement types when GI is made w/o reference to a Purchase Order?
3.     Can GI be made with reference to any other entity/object other than PO?
Thanks

1. Can I do the Goods Issues without reference to a Purchase Order? If so, how can I do this
No u can't ..u have to do Goods receipt for a PO
Raise a PO for the same material and do GR
2. What are the relevant movement types when GI is made w/o reference to a Purchase Order?
u cant do GI for PO
3. Can GI be made with reference to any other entity/object other than PO?
GI aganist cost centre, production order, reservations ....
the easier way to bring in stock of a material is to do intial entry thru MB1C with mvt type 561.

Use of max stock level w/o lot size HB

hello champs..
need a help on below functionality
Can I have the functionlity of max stock level without using "lot size - HB" in material master.
my requirement..tht system should not create any procurement proposal if stock reachs at max level..
but with this i am using min lot size also..and this functionality got vanish if I use "lot size=HB" ..system dont see min or max lot size..it just create the proc proposal for the qty upto max stock level..
my requirement
for a material max stock level -100
min lot size - 50 , max lot size 80
and if my stock is 30 ,and my reuirement is for 80..system should not cross the max stock level and should create the prc proposal for 70 only..
pl share your thoughts on this..I'll appriciate wih necessary reward points..
Br
Sumit

Hi
thanks for reply..but i am not sure whther w/o using HB max stock level will be considered or not..
i yet have to test the same but as per SAP , if you want t maintain themax stock level in the plant , lot size should be EX
is this undertsnding is okie..
thx in advance
BR
Sumit

Max stock level and reorder point for all the materials

Dear experts,
Is there any standard mm report that will give the details of max stock level and reorder point details for all the materials?
Thanks in advance,
Regards,
Krish

Your requirement can be pulled from table MARC. I dont think there is a standard report to meet your requirement. You can meet your requirement through SAP Query though.

MB51 - column for including stock level

Hi,
does anyone know if there is a standard report in R/3 which can display MB51 information and also include the stock level after each docuent/movement.
I guess this can be quickly done using ABAP, but I just wanted to check first if any standard reports exists for this.
Thanks in advance:-)
Br,
Lars H

as I said, this is not an easy task, and your performance will become worse.
MB51 is already a transaction with a poor performance if you have some million records in MKPF and MSEG.
for your goal you would need to calculate the stock level yourself for each movement.
If you want see how such is done, then debug MB5B transaction.
you only ) need to enhance this then to calculate only the unrestricted use stock.
this means you start at a month end quantity and then you need to read each movement and add or subtract or ignore the quantity to finally know what the stock at a certain day was.
Further you would need to read several MARD or MARDH records (starting points for calculation) to get the total unrestricted use stock.
good luck.

Minimum stock level

Hi all,
        My scenario comes like this ...i have two service center"A" and "B"where i ll maintain some minimum stock level of spare parts.
       each service center will get service arder individually for spare parts.service center's issue spare parts against order from minimum stock level. so i maintained make to stock scenario where order is full filled with minimum stock level.so planning has to cover minimum stock level.so i mapped in safety stock.
      But the safety stock level varies with some period.so i need an upload program of safety stock in period oriented manner.
      then fullfillment of service order also based on priority wise .becas spar parts for that sevice center are obtained from some other plant ...which should maintain a plan which determaine priority to give spare parts to "A" and "B" in percentage of priority
so i require 1.how to go for upload of safety stock with periodically?
                  2.How the priority can be given for allocation to verious service center.?\
Regards
suresh

Hi,
For upload the safety stock you can use BDC or LSMW.
for periodic upload try through background program with the help of ABAPer.
Regards,
Nilesh

Macro 'Target stock level (BW)' is inactive

Similar Messages

Maybe you are looking for