Magic mouse lagging or unresponsive when using bootcamp windows 7 on Mac Mini but works fine in Mac OSX 10.8.4

I updated the Apple Broadcam built-in bluetooth radio software through Windows and it found an update. Updated Boot Camp software/drivers to version 5.0.33, the latest which includes a wireless mouse piece.  Replaced the batteries again and turn it off/on several times. In the Bluetooth menu, this mouse usually does not show up in connected devices or will not show up as a device that can be added.  Once it did show up right after turning it off/on but took forever to connect then lost its connection right away and couldn't be discovered again.
I don't think drivers are the issue, seems to be some kind of conflict with wireless adapter & bluetooth maybe. 
I found this which looked promising but no luck:  http://kemal.co/index.php/2012/09/laggy-magic-mouse-boot-camp-windows/
Any ideas?

Here's some trouble shooting tips for the built in iSight: http://docs.info.apple.com/article.html?artnum=93240

Similar Messages

  • Magic Mouse will not scroll in Windows 7 boot camp, but works fine in Mac OS

    I have a Magic Mouse that was working fine it would scroll and everything, then one day it just randomly stopped working in my Windows 7 bootcamp partiontion. I went to the Mac OS to see if there was anything wrong with the mouse, but it works fine in the Mac OS. I already made sure to install all available software updates but that doesnt seem to have helped. Any help would be appreciated.
    Thank you

    My wireless mouse is not recognized by Bootcamp bluetooth.
    Have you been able to solve your mouse issue?

  • Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template.  DVD burning works fine.  Anyone know the problem with blu-ray?  HELP!

    Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template.   DVD burning works fine with menu template.  Anyone know the problem with blu-ray?  HELP!

    For CS4 you must update the Roxio component, especially with Win8
    http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
    http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

  • WRT54G VER 6 delayed response when using the web (Old WRT54G VER 2 works fine)

    Very strange problem. I have had a 2yr old WRT54G VERSION 2 and it (still) works perfectly except I broke the antenna (I don't even use the wireless side). I just got a new WRT54G VERSION 6 and am having weird problems with it. I have the same problem with THREE DIFFERENT REV 6's (Staples hates me by now) but the old REV 2 always works fine when I swap it back in:
    With the REV 6 version when I click on any web link or web site from My Favorites there is like a 5-10 second delay before anything connects. Just dead air for 5-10 seconds with ANY click of the mouse in IE7. When I swap back the old REV 2 version the connection is immediate and fine.  If I do a PING it takes 5-10 seconds for the ping to start then it goes fine with the REV 6 but the REV 2 pings out immediately. Same problem with speed-tests. It takes 5-10 seconds to start but the results are fine on the VERSION 6 but the VERSION 2 is fine. I tried the latest firmware and the settings are the same on both router versions. I find it hard to believe I have 3 bad WRT54G REV6 routers but yet the old VER2 one continues to work fine. Comcast says it isn't their problem (and I agree) yet 3 bad routers seems highly unlikely.
    One thing I have noted.  The INTERNET light on the Version 2 WRT54G blinks at a "leisurely" pace, but the INTERNET light on the 3 VERSION 6's all blink at a tremendously fast rate, probably 5x faster then the REV 2. 
    For now I'm back to the old Version 2 WRT54G.
    Any ideas why 3 Version 6's basically don't work and an old VER2 works absolutely fine (except for the broken antenna).
    All routers have most recent firmware updates.
    Message Edited by MisterEd on 01-30-200711:02 PM

    Has to do with the version 6 routers lack of memory, it gets overloaded with packets so it slows down or just stops working.  Usually unplugging and plugging back in temporarily fixes it.  Do a google search for versions 5 and 6 you will see its a common problem.
    The reason your version 2 works better is it has twice the memory.  After version 4 they switched from Linux operating system to VXWorks.  Supposedly works better with less required memory.  Can they be more wrong?  LOL
    If you want the same performance out of a WRT54G series router look at getting a WRT54GL v1.1.  Made with the same specs as versions 1, 2, 3 and 4.
    Just checked my GL, coming up on 50 days online without a reboot.
    Message Edited by wehowardjr on 01-31-200707:06 AM

  • When using bootcamp windows 8 without the bootcamp drivers everything is messed up?

    Their is no wifi and their is lack of tracpad and keyboard support we need win8 drivers I try to instal the drivers that are for win7 and I get crashes had to reinstal windows many times. Using Parallels or VM no problems.

    There are no Boot Camp drivers. Apple does not yet support Win8. Revert to Win7 or use VM software for now.

  • Unhandled exception when code runs for the first time,but works fine the second

    Hi All,
    I have the following code snippet
    private void RGL_Click(object sender, RibbonControlEventArgs e)
    Word._Document oDoc;
               oDoc = Globals.ThisAddIn.Application.ActiveDocument;
                object start = oDoc.Content.Start;
                object end = oDoc.Content.End;
                oDoc.Range(ref start, ref end).LanguageID = WdLanguageID.wdEnglishCanadian;
                oDoc.Range(ref start, ref end).NoProofing = 0;
    Microsoft.Office.Interop.Word.ReadabilityStatistic DocStats;
                    DocStats = oDoc.ReadabilityStatistics[10];------>exception occurs here when code runs first time
                    MessageBox.Show(DocStats.Name + " " + DocStats.Value);
    When I copy paste a document and click on the button it raises a COM exception but if I click continue and click on the button again, the correct grade level score is displayed.Cant figure out why this is happening.

    Thanks for the answer Eugene, this exception never shows up if I type something and click on the rgl button , but if i open a huge document that is already in Canadian english and click on this ribbon it gives me the following exception
    System.Runtime.InteropServices.COMException was unhandled by user code
      HelpLink=wdmain11.chm#36966
      HResult=-2146824090
      Message=Command failed
      Source=Microsoft Word
      ErrorCode=-2146824090
      StackTrace:
           at Microsoft.Office.Interop.Word.ReadabilityStatistics.get_Item(Object& Index)
           at UsabilityMapping_V01.Ribbon1.RGL_Click(Object sender, RibbonControlEventArgs e) in <my path> 1211
           at Microsoft.Office.Tools.Ribbon.RibbonPropertyStorage.ControlActionRaise(IRibbonControl control)
           at Microsoft.Office.Tools.Ribbon.RibbonPropertyStorage.ButtonClickCallback(RibbonComponentImpl component, Object[] args)
           at Microsoft.Office.Tools.Ribbon.RibbonManagerImpl.Invoke(RibbonComponentCallback callback, Object[] args)
           at Microsoft.Office.Tools.Ribbon.RibbonMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
           at Microsoft.Office.Tools.Ribbon.RibbonManagerImpl.System.Reflection.IReflect.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, ParameterModifier[] modifiers, CultureInfo culture, String[]
    namedParameters)
      InnerException: 

  • Magic mouse lags bluetooth audio

    Magic mouse lags bluetooth audio with cracking and pitch shift.
    After Magic mouse disconnected, then bluetooth speakers sounds perfect.
    Please help!!!

    I have this same issue, but opposite.  My audio in my bluetooth headphones sounds great, but when they are connected my bluetooth mouse (microsoft 5000) is all over the place.
    What's the deal.  I didn't know my $2000 mac would be so inferior to my $800 pc in this regards   (otherwise very happy with switch to mac)

  • Further info needed on the System Time Problem when using Bootcamp

    Hi, my query is an extension on the previously reported problems and fix with the Sytem Time being incorrect when using Bootcamp.
    As respected user 'SideStepSociety' very helpfully pointed out and posted in another thread, the cure for this problem is as follows:-
    In Windows, try this:
    Run > RegEdit


    Find: HKEYLOCALMACHINE > SYSTEM > CurrentControlSet > Control > TimeZoneInformation
    

Add key ( REG_DWORD type ): RealTimeIsUniversal


    Double-click and set value to 1
    However, unless I'm mistaken I have seen somewhere that the key type 'REG_DWORD' is 32-bit based and I am running Windows 7 x64 (64-bit) Bootcamp, therefore do I have to enter the QWORD 64-bit type key i.e. 'REG_QWORD' instead of the DWORD 32-bit type key i.e. 'REG_DWORD', or is it perfectly acceptable and fine to just enter both to cover myself should any of the components revert from 64-bit to-32 bit? ..which I have experienced happening once with Windows 'Gadgets' which normally always runs 64-bit, but once reverted to 32-bit.
    Advice appretiated, thanks.

    Thanks for advice.
    I had gone ahead and entered the DWORD value in the registry just after my post and a couple of week booting between the two OS's, there were no more problems with the time issue between OS X and Bootcamp.
    Shame this most frustrating of little problems where not resolved in a Bootcamp update patch, I had been experiencing this problem for a long, long time not knowing how to fix it and thinking it was my own MacBook Pro that was at fault. I do sympathise now with the possible hundreds or even thousands of Mac-Bootcamp users that are suffering this unbeknown that there's only a special registry fix that has to be manually applied to cure the problem. This is Tacky. I do wonder about Apple sometimes.

  • Question about transfering files between windows OS and mac OS when using bootcamp

    I'm thinking about buying the latest macbook pro, however, many of the statistical programs I use are only compatible with windows OS.  I am aware of fusion and parallels, but I was advised to use bootcamp to maximize the performance of both the statistical programs AND the macbook itself.  When using bootcamp, if I were to create a word document for my statistical output in the windows 7 partition, would I be able to access it directly from the hard drive in the mac OS partition using windows for mac?  Any suggestions would be appreciated!

    I run both Windows and OS X on my Mac. I would never ever want the Windows partition to have write access to my OS X partition. Be cautious when considering this ability. I would much prefer sharing files by a third drive, be it a flash drive, and external HDD, NAS, or an SD card.

  • I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

    I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?

    Purchase and use Paragon Camp Tune

  • My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

    I just figured out the print quality issue for my wife with her new iMac and new printer.
    She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
    Turns out the newer printer had the option to connect via wifi which we used during setup.
    The driver options are completely different depending on how you connect.
    Once I connected via USB the correct options were available and the print quality was better.
    Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
    If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
    One user had to delete the old printer driver before Software Update loaded the newer printer driver.
    https://discussions.apple.com/message/15947486#15947486
    On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
    I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

  • How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

    How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

    Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
    After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
    Windows doesn't use EFI, will have UEFI in Windows 8 though.

  • My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts  to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

    My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts  to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.

    hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
    I writ again my problem 
    i installed win 7 32 bit in my mac pro 13-inch, Late 2011  Processor  2.4 GHz Intel Core i5   Software  Mac OS X Lion 10.7.2 (11C74)
    but there is no sound in windows 7  please send me a address sit for downoad driver that i can use in Afghanistan
    believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result

  • My MacBook Pro mid 2012 laptop continuously lags on every web site and I get the spinning beach ball very often but when I log in as a guest, everything works fine. What should I do to fix this?

    My MacBook Pro mid 2012 laptop continuously lags on every web site and I get the spinning beach ball very often but when I log in as a guest, everything works fine. What should I do to fix this?

    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Test.

  • HT204400 I used my apple tv wirelessly and it worked fine,then I plugged an Ethernet wire into  the Apple TV to move it and could not it to connect.  When I unplugged Ethernet wire it will not give me a wireless option. How do I get that back?

    I used my apple tv wirelessly and it worked fine,then I plugged an Ethernet wire into  the Apple TV to move it and could not it to connect.  When I unplugged Ethernet wire it will not give me a wireless option. How do I get that back?

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
        1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
        2.    Connect the micro USB cable to the Apple TV and to your computer.
        3.    Reconnect the power cable (only for Apple TV 3)
        4.    Open iTunes.
        5.    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

Maybe you are looking for