Magic mouse not working when my computer wakes up from sleep mode sometimes

This does not happen all the time but it is starting to happen more and more. When my iMac is asleep and I wake it up the mouse is non responsive. I have looked at the green indicator light on the magic mouse and it does not respond as well. I have turned the mouse off then back on and that does nothing. I thank this may be a Bluetooth problem because I have tried this with 2 magic mice. The only way I can get it to work is to restart the computer.
Please advise??

I would add the mouse to bluetooth favorites in System Preferences > bluetooth > Highlight mouse on the left > click gear icon below this list > click "show more info" if not already checked > click the gear icon again and "add to favorites".
http://support.apple.com/kb/TA21371
If that doesn't do it then a SMC reset might be in order:
http://support.apple.com/kb/HT3964
Regards,
Captfred
Message was edited by: captfred

Similar Messages

HP DM3 - Mouse Freeze's up when the computer wakes up from sleep mode.

Hi Guys,
I just had a DM3 with the 2.26 sp9300 intel chip built for me and every time the laptop goes to sleep and wakes up the mouse freezes up with a magnifying glass and its impossible for the mouse to do anything. I have to tab over to the task manager and tab down to the power button to restart my PC and than it works again. Anyone know whats going on? Driver problem? any updates yet?
Thanks !!
Jon

Hello,
I picked up my DM3 from PCWorld last night and I'm having the same problem every time (4 times) when I've closed the lid and re-open it again. The magnifying glass appears and I can't move the pointer using the trackapd and have to restart the machine to gain control again.
Any word from HP on a solution?
thansk,
Cat

After update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.

hello,
after update to OS X 10.7.5 on my Mac Pro (2009) USB ports don't work at all after wake up from sleep mode; with 10.7.4 there was (nearly) any problem.
the used ports appear to be "killed"; the unused USB ports seem to work, but the Mac works in slow-motion.
The only "solution" is to restart my Mac.
- SMC-reset, PRAM-reset or repairing user rights had no positive effect; what is the solution - a bug-fix-update???

I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again.

Short flickering when the notebook wakes up from sleep mode MacBook Pro Late 2013

Hello everyone!
I have a question concerning the display of my new MacBook Pro with retina display (late 2013).
Sometimes when opening the lid when the notebook wakes up from sleep mode, the display is flickering for like two seconds. Then everything is normal again.
This specially occurs when the lid has been closed for a longer time. It makes no difference if the power adapter is plugged in or not.
Have you experienced a similar flickering with your MacBook Pro?
Thank you in advance!

Hello!
I have the same problem with my late 2012 MacBook Pro Retina. The constant flickering after being awoken from sleep was a minor annoyance for me so I contacted Apple Support.
I shall explain what I have done thus far, and I recommend you follow the same steps as I did to tick off possible causes:
Firstly, I reset my PRAM (http://support.apple.com/kb/ph14222) and SMC (ttp://support.apple.com/kb/ht3964).
The issue still remained so I checked if the flickering occurred in a new user (if it does not then it points to your account having a setting which is causing the flickering - possibly third party). For me the flickering continued so I tested it in Safe Boot (which worked fine!).
I then ran (just to be certain) the Apple Hardware Test (http://support.apple.com/kb/ht1509). All seemed to be OK. So I reinstalled OS X and still the issue remained.
It was then I had an Apple Support person 'screen share' with me and we went through certain folders. My GPU folder had an unusual amount of files so we trashed them and began a restart however this led to a bigger problem; my notebook wouldn't boot (not even in Safe Boot!), so be very weary at this stage, I'm not sure if this was a rare case or we deleted something we shouldn't have. I then had to go into recovery mode to get back to square one.
Back to the initial problem I reinstalled a 'clean' OS X version from recovery mode; this was to determine whether if the data is corrupted on my account or if it's something else; most likely hardware by now even if there was nothing that came up in the hardware test (it won't account for everything). I checked from both a backup of my data and then from a fresh user after reinstalling OS X and still the flickering continued.
It was then a Senior Apple Support person set up an appointment to have my MacBook looked at and possibly repaired (it could be a minor wire causing the problem).
That is the point I am at now, so for my case it seems like a minor hardware problem. If your case is as similar as mine I recommend making an appointment with them to run more sophisticated hardware tests that your own MacBook would not run.
I will comment again when my issue is completely resolved for those who come across this Discussion in the future.
Hope this helps!

Getting microphone alive after computer wakes up from sleep mode.

Is it possible to detect when the Flash Player "wakes up" from the computer's sleep mode? Is there an event that gets dispatched when a computer wakes up in any of the AIR specific classes? I need to reinstantiate a netstream connection and the mic when the computer wakes back up. Any guidance or pointers to do this would be greatly appreciated!
Thanks for all your help and time!
Best,
Laz

It appears it is a specific update. You could try 2 things:
1) Verify and install the latest device drivers for your PC from the manufacture's support web site:
http://support.lenovo.com/en_US/detail.page?LegacyDocID=migr-70443
2) Install or uninstall one update at a time to narrow it down to specific update (KB number). If you find the offending update check / search the internet for the specific Microsoft KB article and what is intended to fix. It is possible there
is a newer update that supersedes it.
J W Stuart: http://www.pagestart.com
Never be afraid to ask. This forum has some of the best people in the world available to help.

My fans don't go above 2000 rpm when my computer wakes up from sleep

Only when I shut down my computer, and turn it back on do they work. Is there any hope this will get fixed?

What do you do when it behaves correctly immediately after an SMC reset but then the issue persists and the fans fail to increase speed after he wakes the computer up from sleep?
To test, I would back the drive up and install a fresh system to eliminate a software issue.
Dave M.
MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
Macsimum News Associate Editor  Creator of 'Mac611 - Mobile Mac Support'

When trying to log back from sleep mode, the screen behaves as a rotating cube, with the mouse pointer in the top left corner. Hangs.

iMac OS X Ver 10.7.3
21.5 Inch, Mid 2011
2.5 FHz intel Core 5
12 GB 1333 MHz DDR3
When the computer in woken from sleep mode we see two login options (bineg used by two users).
But when we try to login, the screen just behaves as a sluggish rotating cube.
Nothing works, we just have to hard boot at this time.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Note: If FileVault is enabled under Mac OS X 10.7 or later, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Thunderbolt ethernet not working when computer wake up from sleep.

thunderbolt ethernet not working when computer wake up from sleep.
it will not happen in Mountain loin.

I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
In this case the problem was related to mDNSResponder task which handles all dns queries.
It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
QUESTION: Is your problem independent of the access point / router you connect to.
I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
Software is of poor quality. Not much more to say in this matter.
I found a very interesting article dated 1996 about programming which I think is still valid.
Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
Below the fragment (with some connection to Apple)
Software is everything. It also s***s.
"It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

Magic mouse not working in mountain lion

magic mouse not working in mountain lion....What can I do?

Have you tried a fresh set of Alkaline Batteries?
Was it ever paired to another divice?

My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

My password works fine when I turn the computer on, but when I try to wake it from sleep mode the computer doesn't recognize my password -- the same one I used successfully when I turned the computer on.

Okay, I seem to have solved the problem I posted about earlier. I noticed that the language preference in the upper right hand corner of the screen (between the date and time and the Spotlight icon) had somehow gotten switched from American English to French. When I switched it back to American English, my password worked when waking the computer from sleep mode. I have no idea why changing the language preference would affect the way the password works but that seems to have been the case. I'll post again if I experience more problems.

NEW COMPUTER USING WINDOWS 7 WILL NOT WAKE UP FROM SLEEP MODE. I HAVE TO MANUALLY TURN IT OFF AND BACK ON.

New laptop with Windows 7 does not wake up from SLEEP MODE. I have moved the computer, moved the cursor, pushed every key on the keyboard, moved the space bar but nothing wakes it up. I always have to manually turn the computer off and then
turn it on again. I have searched the FORUM but don't see anyone having my problem. I have searched under SLEEP MODE in GETTING STARTED WITH WINDOWS 7 but I don't find where they address the different modes. Any suggestions?

Hi, I would suggest you to check allow this device to wake the computer have a tick mark.
Here are the steps:
1. Click Start, type Device manager in the search box.
2. Go to Device manager.
3. Click on keyboard, it will display your keyboard, right click and go to properties.
4. Select Power management.
5. Check Allow this device to wake the computer.
Follow the same procedure for mouse, restart the computer and check if it works properly.
I also suggest you to update your display drivers, you can logon to the manufacturers website and download the latest drivers and install.
For more information:
http://support.microsoft.com/kb/266283
Also I suggest you to run the Power troubleshooter to adjust your computer's power settings, and check if it works properly.
Here are the steps:
1. Open the Power troubleshooter by clicking the Start button, and then clicking Control Panel.
2. In the search box, type troubleshooter, and then click Troubleshooting.
3. Under System and Security, click Improve power usage.
If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
For more information, logon to:
http://windows.microsoft.com/en-US/windows7/Open-the-Power-troubleshooter
http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions
If the issue persists, please collect the Power Efficiency Report for further analysis.
Guided Help: Get a detailed Power Efficiency Diagnostics Report for your computer in
Windows 7
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

The problem would seem to be in the firewall in your router. Have you tried disabling it? I assume you've updated the router firmware, right? Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.

Officejet 7612 E All in one printer will not wake up from sleep mode or powersave

We cannot get a Officejet 7612 to wake up from sleep mode or powersave. I have tried logging into the web interface but I am only able to delay sleep mode up to 15 minutes. I need to shut this off or have the issue fixed. The only way to use the device is to unplug the power cord and plug it back in. The printer does not even respond to the power button.

Hello,
Please try the below mentioned steps... Firstly print an network configuration page by touching the Setup > wireless Menu > Wireless Settings > Display Network Configuration > Print info [Ok] -type in the printer's ip in address bar of your browser ( Internet explorer or firefox or chrome ), which would display printer inforamtion. click on Network Menu ,
click Network on Left, of the window.
click on Network Address (IP), the info will be displayed on the right side. - by default the selection will be on Automatic IP.- click on Manual IP and then type in the following..
printer's ip address in "Manual IP address"
subnet mask using the printed report in "Manual Subnet Mask"
default gateway using printer report in "Manual Default Gateway" Now click Apply. Wait untill the settigns are applied.-After which, power Off the Printer.
-Restart the PC.
-Power On the printer. Hopefully the issue should be resolved.

My imac freezes , need to restart everytime i wake it from sleep mode. just started happening 2 weeks ago.

For about 2 weeks whenever I return to my imac and tap the mouse to wake it from sleep mode my screen is frozen. I have tried to wait for it to unfreeze but it doesnt wake. I cannot get any results from using the mouse or the keyboard. I always have to hard reset the computer to be able to use computer again. My mac is a year old. Anyone have any thoughts as to why tis is happening? Thanks

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Don´t wake up from sleep mode

Since few day, my Mac Mini didn´t wake up from sleep mode.
When i click on Mouse or Keyboard, the Mini stay´s at Sleep.
I must shut down the Mini by using the power on/off button.
Also after a few time, the Bluetooth Settings in the Bar Menu getting slower,
it needs a time to pop up the settings windows.
i use 10.8.4.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Magic mouse not working when my computer wakes up from sleep mode sometimes

Similar Messages

Maybe you are looking for