Magic Mouse will not pair

I have installed fresh batteries, tried repeatedly to connect via BT with no results. I get the no mouse found message. It had been working great until I booted up from OS10.4 on another drive. Suggestions please? My DLink BT module is lit, then goes out.

Also, I checked the Console when the pair failed and got this message:
11/11/11 11:05:01.640 AM Bluetooth Setup Assistant: Pairing failed with 'Dirty Mouse': error 0x22
11/11/11 11:05:02.121 AM mdworker: (Warning) Import: Bad path:/� �  /StoreData
If that helps...

Similar Messages

  • Magic Mouse will not pair (OS X Yosemite version 10.10.1)

    All of a sudden my Magic Mouse will not pair. Very annoying!
    I have changed the batteries, several times, so the light is on on the Magic Mouse.
    I have opened System Preference/Bluetooth. I can see that it is searching for devices but it is not connecting to the Magic Mouse.
    I currently have a Apple Wireless Keyboard and have paired an Ultrathin Touch Mouse in the interim, but I want my Magic Mouse back.
    Can someone please help (in a language that I can understand) with this issue.
    Thank you so much.
    Cheers
    Breeze

    Try a PRAM and SMC reset of your Mac.
    You may need to use an Apple Wired Keyboard to perform the PRAM reset.
    Reset your computer’s PRAM
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support

  • 10.10.1 magic mouse will not scroll now

    10.10.1 magic mouse will not scroll now
    anyone else having this problem
    mouse works... is recognized but the preference pane
    has not swipe selection and i cannot turn off bluetooth

    To resolve this issue try the following:
    from the upper left corner of your screen click:
    1.  / system preferences / bluetooth
    2. Locate your mouse under the devices panel
    3. Remove your mouse
    Click on it so it is highlighted in blue
    Click in the blue "x" or you can click delete after you have selected your mouse.
    4. Reconnect your mouse (re "pair" ) your mouse
    This should resolve the scrolling issue if it occurred after the 10.10.1 update.

  • Magic mouse will not scroll horizontally

    Magic mouse will not scroll horizontally

    We need far more information.
    Has it previously scrolled horizontally?   Is the fault restricted to certain browsers or program facilities?   What machine are you using it on?    Has this problem appeared following an OS upgrade.

  • HT3904 Magic Mouse will not scroll sideways

    My magic mouse will not scroll sideways, i am unsure how to fix it.

    System Preferences / Mouse / More Gestures

  • My new magic mouse will not scroll on my imac OS X 10.4.11  The mouse has new batteries and moves the pointer around the screen and clicks just fine. Any ideas??

    My Magic mouse will not scroll on my imac using OS X 10.4.11  The mouse in new and has new batteries. It will right and left click, and moves around the screen well. Any ideas??

    Minimum Requirements
    A Bluetooth-enabled Macintosh computer
    Mac OS X v10.5.8 or later with Wireless Mouse Software Update 1.0* or Mac OS X v10.6.1 or later with Wireless Mouse Software Update 1.0
    Tiger can't utilise it's functions.

  • My magic mouse will not attach without commanding it to connect it finds the mouse then it cannot find mouse ever since i installed lion

    since loading lion i have had no end of issues
    The magic mouse will not auto connect but the track pad and key board will once connected the mouse works fine..
    For my birthday i was given a ipad FOR Chrismas i GOT A Diary

    Hi,
    I am having the same issue listed above on my new Mac Mini i just bought, I also contacted Express VPN support and got the same instructions with exception of the command to run in the utilities terminal.  I tried the steps listed, and both commands (posted here, and sent to me directly by Express VPN support), and still unable to connect on my Mac Mini running OS X 10.8.2, but I am able to connect on my iPad and my MacBook which is running Mac OS X 10.6.8.  Usually Express VPN is spot on with their customer support, but this is taking longer to get resolved.  Here is the steps sent to me
    Try doing the following to see if the problem gets resolved:
    Please follow the instructions here: https://www.expressvpn.org/support/setting_dns_servers_mac_os
    (should still be the same for Lion) and then add the following DNS servers: 8.8.8.8 & 208.67.222.220. After adding the DNS servers, please do the following steps as well:
    Note: If you're connecting to your ISP via a PPPoE connection, then set the DNS servers on the PPPoE connection itself and then restart your computer for the DNS settings to take effect.
    1. Click on Applications
    2. Click on Utilities
    3. Click on Terminal
    4. Type the following command (without the quotes): "sudo killall -HUP mDNSResponder"
    5. Press enter and then try reconnecting to the VPN.
    If you're still unable to connect, please send us in the latest log files.
    Hope this helps. Let us know how it goes.

  • TS3048 mouse will not pair

    MS Bluetooth Notebook Mouse will not pair with macBookpro. tried all things. is recognized but will not pair. new batteries, rebooted, reset pram. it worked until i removed it by mistake. OS 10.8.2. Only thing I can think to do is throw it aganst the wall, but that will only mean that I'll need to buy a new mouse and start all over. Hoping someone has a better idea.

    Hello:
    Try deleting the mouse from the system.  Turn the mouse off.  Reset SMC (which is also a restart.  Turn the mouse on and, hopefully, it will be found by the system.
    Barry

  • HP X7000 Wifi Mouse will not pair since I upgraded to Windows 10

    I upgraded to Windows 10 yesterday 29 July 2015 and now my HP X7000 Wifi Mouse will not pair with my laptop HP Pavilion dv7.

    I have the same issue.  I upgraded today and I have to use the built-in touchpad on my HP ENVY 17 instead of my HP X7000 Wifi mouse.  From the looks of it, HP hasn't updated their drivers/software to support Windows 10. I am not very happy with HP - my ENVY 17 gets insanely hot in the palm rest area to the left of the touchpad, and now this wifi mouse doesn't work with Windows 10.  2 big negatives that will prevent me from buying HP in the future.  The HP Envy 17 temperature issue is well-known among us customers that have to deal with it. Come on, HP - support your products!

  • HT1338 updated OS to Maverick, now magic mouse will not scroll. what happened?

    I updated my OS to Mavericks latest, and now the magic mouse does not scroll...what happened? works through bluetooth, so I can move the cursor, but it will not scroll.
    Can someone help me with this?
    Thanks

    Hi davidgraham193,
    Thanks for visiting Apple Support Communities.
    If your Magic Mouse is not scrolling, first go to the Mouse section of System Preferences and try toggling the "Scroll direction: natural" checkbox to see if it has an effect.
    Scroll direction: natural:
    Select this option to move the contents of a window the same direction as your fingers.
    From:
    OS X Mavericks: Change the way your trackpad works
    http://support.apple.com/kb/PH13804
    If the issue persists, see this link for additional troubleshooting steps:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    Best,
    Jeremy

  • Replacement magic mouse would not pair; need

    This problem is solved; am starting this discussion to maybe save someone time and trouble.  Problem began when I dropped my magic mouse and ended its life.  I was surprised it was that fragile but that is another story; I use is too much to give it up.  Bought a new magic mouse and tried to install while the old mouse was still recognized by the computer.  I don't really know if this was the problem but the new mouse would not pair, and then my Mac Pro would not even recognize or find it through system preferences.  So I clicked the Apple and went to "about this mac" / "more info" / "system report" and it was listed under bluetooth as connected but not paired.  Went to bluetooth in sys preferences and tried to delete without success.  Went back and forth trying to delete and then decided to try a restart.  Voila!  Checked system report and was not listed.  Went to sys preferences to set up bluetooth mouse and was set up and paired in seconds.  I do not understand what happened; can't explain either but it seems that I cleared a cache in the restart that allowed me to start fresh.  Once that was done was good.  I wasted an hour or more being very frustrated because before the set up had been so easy for the first magic mouse and my magic track pad.  Hope this helps someone.

    DUDE! YOU ROCK! 
    I had the same issue. I've just spent an hour trying to pair and repair, restarting, etc.  Then i found your post about the replacement Magic Mouse. Mine started dropping signals after a year so I decided to buy a new one, but I thought the old one might be interefering because I could not get the new one to pair.  I did what you did in system preferences to set up a new mouse and it worked like a charm!  
    Grateful for your post.

  • Lenovo N700 mouse will not pair

    I just got this new mouse and while it works in wireless radio mode with the dongle, it will not pair via Bluetooth. I am running Windows 8.1 on a Lenovo Yoga 11s with Bluetooth 4.0. I'd rather not use the dongle obviously. Why do I get a driver error when trying to pair and why can't I find any drivers for this on the Lenovo website?

    Hi,The mouse has to be in mouse mode and in wireless mode also! Press and hold the L,R and the middle button(not the windows one(the middle touch have 2 buttons underneath)) then switch to Bluetooth mode without releasing the 3 buttons, after 5-10 secs. you will see the orange light and after that the mouse will be able  to pair. P.S. Just tried it 3 times and it has worked for every try 

  • 3rd party mouse will not pair using Lion?

    Just upgraded to Lion tonight.  My HP Laser bluetooth Model N558 mouse which worked perfectly on the 17" macbook pro using Snow Leopard NOW will not pair with Mac.  Downloaded the latest HP drivers, did a software update, restarted but mouse attemps to pair for about 1-2 seconds and then error message comes up saying the Mouce cannot pair with the Mac.  Very frustrating and not finding any answers on MAC or HP forums. Error message on "select bluetooth device" says, "The device does not have the necessary services." It sure had the necessary services using Snow Leopard.  Next error message, "The paring attempt was unsuccessful.  The device is refusing the paring attempt..." 
    No matter what I have tried, new batteries, restarts, take out batteries for 10 minutes, holding down 'discover' button for 10 seconds. I've tried just about everything mentioned in the forums.
    I don't enjoy the prospect of having to lug a usb mouse on my road trips but cannot find a solution.

    Buenos dias.
    yo tengo el mismo raton de HP Laser N558 DPI 1600
    ManoFacturado 2009
    Yo lo usado con Mac OsX 10.4  ; 10.5.0 ; 10.6.8
    sin ningun problema incluso con windows.
    compre raton de Apple no me termino de acostumbrar a el.
    La pena es que HP no de respuesta con el raton HP n558.
    De todas manera a mi no me enlace ni poniendo 00000 ni sin codigo etc.
    Alguien sabe alguna solucion.
    Saludos Pedro Colas
    Macbook Pro 15,4" dicembre 2008 2,4GHZ 8GB DDR3 1066,HD 1TB 5400
    Powerbook G4 Aluminium 1,67 PPC , HD 320GB , 2GB DDR2
    ===================
    Good morning.
    I have the same HP Laser Mouse 1600 DPI N558
    ManoFacturado 2009
    I use with Mac OSX 10.4; 10.5.0, 10.6.8
    without any problems even with windows.
    buy Apple mouse I get used to the term.
    The pity is that HP no mouse response with HP n558.
    In any way I do not link or putting code 00000 or no etc..
    Anyone know any solution.
    Greetings Pedro Colas
    Macbook Pro 15.4 "2.4GHz dicembre 2008 8GB DDR3 1066, 1TB HD 5400
    Aluminum Powerbook G4 1.67 PPC, 320GB HD, 2GB DDR2

  • We just added Maverick to our Mac and now the magic mouse will not scroll with finger tips!!

    We just upgraded our system to Maverick. Now our majic mouse does not respond to the finger swipe at all.
    Also the volume contro;s stopped working on the wireless keyboard.

    Hi davidgraham193,
    Thanks for visiting Apple Support Communities.
    If your Magic Mouse is not scrolling, first go to the Mouse section of System Preferences and try toggling the "Scroll direction: natural" checkbox to see if it has an effect.
    Scroll direction: natural:
    Select this option to move the contents of a window the same direction as your fingers.
    From:
    OS X Mavericks: Change the way your trackpad works
    http://support.apple.com/kb/PH13804
    If the issue persists, see this link for additional troubleshooting steps:
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    Best,
    Jeremy

  • My Magic Mouse Will not scroll or left click?

    At 11:08 pm my magic mouse would not do anything but right click. I can not scroll either way, nor can i rightclick. I have tried System prefrences. What do i do?

    Here are Apple's troubleshooting notes for Mice and Trackpads.
    Troubleshooting wireless mouse and keyboard issues

Maybe you are looking for

  • Query Tuning Help please

    I ran the below query two times . first this query run within 4 minutes now it is running withing 20 minutes only . and how can I reduce the running time of this query. my first table TABLE1 has partitioned day wise. Total 14 partition in TABLE1 so i

  • One success over the dreaded 34506 error.

    I upgraded to iLife 5 in July 05 and successfully made two movies with iDVDs both over an hour in length, therefore using Best Quality. I had chapter markers immediately after a fade out as that is the way a scene was ended and how a new chapter was

  • Safari crashes on page load up

    I have OS 10.5.7, Safari 4.0. Safari loads up fine to default favorite web pages. However, when click on a page or directly ente the URL the page begins to load up and then crashes leaving me with the Relaunch, Report, Ignore option. I have repaired

  • Standard Program -  WDT_ALV

    Hi, Upon Execution this program you will get selection screen and out put alv in the same screen. is there any way to make it first column as url link & let me know how to find which record is selected from the list. Appreciate with your help. Thanks

  • My iPhone 4s is stolen.Help Me Please

    My iPhone is stolen.I want to make my iPhone data reset. no one can't sell my iphone.How to make it. please tell me My english language is not perffect