Mail Adapter Send Mail with Attachment
Hi all,
I'm doing some tests on XI and implemented a little scenario, that send Mails.
So this works fine, but I want to have the content as the content of the mail (no prob) and a attachment with a little more information for the user in a plain text file.
I tried to code it with content-type multipart and all these stuff, but didn't come to a solution.
Some one solved such a scenario already and can help?
I also read some thread on SDN, but no solution. Perhaps its to simple
Thanx
regards
Olli
Oliver,
We have found the solution for you.
You should configure the mail adapter with 'use the mail adpater' and 'keep attachments'.
Create an XML file conform the XML structure provide by SAP
The mail package should look like this:
<?xml version="1.0" encoding="utf-8"?>
<ns:MT_Mail_Sent xmlns:xi="http://sap.com/xi/XI/Mail/30">
<xi:Mail>
<Subject>Item</Subject>
<From>[email protected]</From>
<To>[email protected]</To>
<Content_Type><b>multipart/mixed; boundary="AaBb--984dfgeSSd3532"</b></Content_Type>
<Content_Disposition>attachment</Content_Disposition>
<Content>
<b>AaBb984dfgeSSd3532</b>
Content-Type: text/plain
Hello, this is sample data.
<b>AaBb984dfgeSSd3532</b>
<b>Content-Type:</b> text/plain;name="CSV_data.csv"
Order number;Item number;description<xsl:text>
</xsl:text>
<xsl:for-each select="Article_line">
<xsl:value-of select="Ord_nmbr"/>;<xsl:value-of select="Item_nmbr"/>;<xsl:value-of select="Description<xsl:text>
</xsl:text></xsl:for-each>
<b>AaBb984dfgeSSd3532</b>
<b>Content-Type:</b> text/plain;name="TXT_data.txt"
Order number;Item number;description<xsl:text>
</xsl:text>
<xsl:for-each select="Article_line">
<xsl:value-of select="Ord_nmbr"/>;<xsl:value-of select="Item_nmbr"/>;<xsl:value-of select="Description<xsl:text>
</xsl:text></xsl:for-each>
<b>AaBb984dfgeSSd3532</b>
</Content>
</xi:Mail>
</ns:MT_Mail_Sent>
In the above example you should have some content and 2 attachments (1 csv file and 1 txt file).
After each break (AaBb984dfgeSSd3532) specify again the 'Content-Type'.
Good luck
Regards
Ron
Similar Messages
-
XI Mail Adapter: sending emails with attachment with help of java mapping
Hi ,
On trying out the scenerio mentioned in the blog, using the java mapping provided
"XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
The scenerio works just fine.
But the payload as the content of the attachment is not getting generated in proper XML format.
I suppose it's because of the replace special characters code part..
Can anyone help me state the modification required in the code.
Thanks!
Regards,
Faria MithaniIt might be a codepage issue. Is your original payload UTF-8?
-
Mail_Receiver: Send Mail with attachment
Hi everybody,
I need some help. I want to send a mail with attachment.
for this I have imported SAPs xsd for the mail adapter.
I wonder how to map the target fields?
The following causes five! attachments in SXMB_MONI and the adapter throws
java.lang.IllegalArgumentException: can't parse argument number
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1>
<ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>SubjctName</Subject>
<From>mailadress</From>
<To>mailadress</To>
<Content_Type>text/plain; charset="ISO-8859-1"</Content_Type>
<Content_Description>
<attachment filename="filename.txt">This should be the content of the attachment</attachment>
</Content_Description>
<Content>Constant</Content>
</ns1:Mail>
</ns0:Message1>
</ns0:Messages>
How do I have to foll the target fields?
Thanks regards
MarioHi
the following links may help you :
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
Also reffer to the below mentioned thread;
Regarding mail sent with an excel attachment
Regard's
Chetan Ahuja -
Send mail with attached file without using Repository
Hello,
I want to know if have a way to Send mail with attached file without using Repository.
Regards
EladElad,
Check this article where a image has been picked by the file adapter and sent as an attachment to the mail adapter.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816">Sending an Image File Through XI in a File-to-Mail Scenario</a>
For how to proceed without integration repository content look into this blog,
<a href="/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository">How to send any data (even binary) through XI, without using the Integration Repository</a>
Combining these 2 you have the solution.
Regards
Bhavesh -
Sending Mail with attachment and preserving the order of attachment
Hi Everyone!!!!!!
My requirement is to send Email with attachment in the same order as they were attached by Sender while composing the mail. I want to preserve order of attachment in the mail and when receiver open a mail, the attached files should be reflected in same order as it was on sender side. In my application,the documents being upload are already in my database. So, user just requires to mark the corresponding check box and enter the Sequence number for each attachment. When he clicks on "SEND" button, the Source file is first written from database to OS level and then files are attached from source available on OS . The attached file name could be anything. Based on the Sequence number file should be attached and send. My current code works fine,but problem it is that the Sequence number is not preserved in my attachment . However, when I traced the output of FOR Loop by inserting it in a table " temp_trace" I found that the Sequence is preserved in the order that I want. So, I think that uploaded files are written on the Operating system in same order but they are not attached in same order. Below is the sample code that is I am using to attach file in email. Here, the user_sequence is the sequence number entered by user.
for i in (select case when user_sequence is not null
then trim(to_char(user_sequence ,'09'))||'_'||file_name||'.pdf'
else ||'_'||file_name||'.pdf' end file_name ,
file_src,length(file_src) len,cd.doc_id,PRIORITY from
MIM_CLIENT_DOCS CD,(select DOC_ID ,user_sequence from table P_DOC_AND_user_sequence ) TEMP_TAB
WHERE CD.DOC_ID = TEMP_TAB.DOC_ID order by case when user_sequence is null then 1 else 0 end, file_name)
loop
insert into temp_trace values(i.file_name);
L_OUT := UTL_FILE.FOPEN(v_oracle_dir,i.file_name,'wb',32760);
end loop;
I want my output as
1_first attachment.txt
2_second_attachment.docx
3_abc.sql
_xxx.txt ------------------ When sequence is not assigned by user That is null at last.
Unfortunately, I am not getting attachment in mail in this sequence. Can anyone give me suggestion.
Sorry for stuff essay and thanks in advance!!!!!!!!!!!>
Please update your forum profile with a real handle instead of "974850".
My requirement is to send Email with attachment in the same order as they were attached by Sender while composing the mail. I want to preserve order of attachment in the mail and when receiver open a mail, the attached files should be reflected in same order as it was on sender side. In my application,the documents being upload are already in my database. So, user just requires to mark the corresponding check box and enter the Sequence number for each attachment. When he clicks on "SEND" button, the Source file is first written from database to OS level and then files are attached from source available on OS . The attached file name could be anything. Based on the Sequence number file should be attached and send. My current code works fine,but problem it is that the Sequence number is not preserved in my attachment . However, when I traced the output of FOR Loop by inserting it in a table " temp_trace" I found that the Sequence is preserved in the order that I want. So, I think that uploaded files are written on the Operating system in same order but they are not attached in same order. Below is the sample code that is I am using to attach file in email. Here, the user_sequence is the sequence number entered by user.Always post code using <tt>\...\</tt> tags as described in the FAQ.
for i in (select case when user_sequence is not null
then trim(to_char(user_sequence ,'09'))||'_'||file_name||'.pdf'
else ||'_'||file_name||'.pdf' end file_name ,
file_src,length(file_src) len,cd.doc_id,PRIORITY from
MIM_CLIENT_DOCS CD,(select DOC_ID ,user_sequence from table P_DOC_AND_user_sequence ) TEMP_TAB
WHERE CD.DOC_ID = TEMP_TAB.DOC_ID order by case when user_sequence is null then 1 else 0 end, file_name)
loop
insert into temp_trace values(i.file_name);
L_OUT := UTL_FILE.FOPEN(v_oracle_dir,i.file_name,'wb',32760);
end loop;I want my output as
1_first attachment.txt
2_second_attachment.docx
3_abc.sql
_xxx.txt ------------------ When sequence is not assigned by user That is null at last.
Unfortunately, I am not getting attachment in mail in this sequence. Can anyone give me suggestion.I see no code that attaches anything to email messages. What code is used to do this? Why are the files being written to the file system? -
Sending mail with attachment and body.
Hi Experts,
I have a requirement of sending a mail with an attachment and also the mail will have a body whose content will be same as that in the attachment.Subject of the mail will also be configured dynamically.Though I am able to send the mail with the attachment but I am not able to configure the body whose content will be same as that of the attachment.
I have unchecked the "Use Mail Package" and has hard-coded the "TO","From" field for sending the mail with attachment.
Can you please check and let me know how to configure the body which will be same as that of the attachment.
Thanks and Regards
Atanu MazumdarHi,
Use MTB module and then one of the parameter which can allow you to send message in attachment as well as in message body.
Transform.ContentDisposition: it helps us to decide if we want to send the payload as an attachment or in the message body. If we give the Parameter value as u201Cattachmentu201D then we will have the payload attached in the mail and if we assign this value as u201Cinlineu201D the payload will go in the mail body.
Hope this helps you..
Regards.... -
Sending mail with attachment fails on MAC Mail and WRP400.
Sending mail with attachment fails on MAC Mail and WRP400.
We have hundreds of WRP400 connected with Mac (Machintosh) computers. No special configurations are applied (no virtual server or DMZ). Web navigation, P2P programs and sending mail without attachment work right.
The problem is the impossibility to send mails with medium or big size files attachment from MAC Mail.
If we use Windows PCs or a different linksys routers (eg. WRT54G) the problem not happens.
We have upgraded WRP400 firmware version from 1.00.06 to 2.00.05 but the result is the same. Sending mail with attachment using Mac fails.
We tried to configure WRP400 with DMZ to a particular MAC. We tried to configure Virtual server on tcp 25 port of a MAC. The result is always the same.
This is a WRP400 bug? Windows PCs work right. MAC and MAC mail works right with other linksys router.
We need help. Thanks.The problem was fixed since beta firmware 2.00.11.
I think that this issue was caused from a bug that decrease upload bitrate of WRP400 after some days of activity.
See more details on Cisco forum under title "WRP400 stops responding after browsing certain websites".
Thanks. -
Convert Script output data to Text(.txt) file & send mail with attachment.
Hi All,
Requirement: I shulb be able to conver th Script output data to Text(.text) file & send a maill with attachment with this text file. Formant of text file should be like output of Print priview.
Plese sugget with Function modules to cover as Text file.
I am able to converting the Script output data to PDF and sending mail with attachment. So I don't want PDF file now.
Thanks in advance.Hi, Thanks for responst.
We can convert the Scirpt output to PDF file by using OTF function module and the PDF file looks like Print Privew output.
Same like this I want Script out in NOTEPAD (.txt). Is that possible, Plz sugget with relavent Function Modules.
Thanks. -
We want to send a mail with attachment pdf file.
Hi!!!
We want to send a mail with attachment pdf file.
The PDF file this is in the server sap.Hi,
Pls check web logs like
/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d! -
Send a mail with attached file .xls but i got file without
i tried to send a mail with attached file .xls. but i am able to send the file , we recived the file without file name. please do the same
thnaks in advance.
END-OF-SELECTION.
Populate message body text
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
'Example .xls documnet attachment'
'XLS'
'filename'
CHANGING GD_ERROR
GD_RECIEVER.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM DATA_RETRIEVAL.
SELECT EBELN EBELP AEDAT MATNR
UP TO 10 ROWS
FROM EKPO
INTO TABLE IT_EKPO.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM BUILD_XLS_DATA_TABLE.
CONSTANTS: CON_CRET TYPE X VALUE '0D', "OK for non Unicode
CON_TAB TYPE X VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO IT_ATTACH SEPARATED BY ''.
CONCATENATE '' IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_EKPO INTO WA_CHAREKPO.
CONCATENATE WA_CHAREKPO-EBELN WA_CHAREKPO-EBELP
WA_CHAREKPO-AEDAT WA_CHAREKPO-MATNR
INTO IT_ATTACH SEPARATED BY ''.
CONCATENATE '' IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM INITIATE_MAIL_EXECUTE_PROGRAM.
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
FORM POPULATE_EMAIL_MESSAGE_BODY.
REFRESH IT_MESSAGE.
IT_MESSAGE = 'Please find attached a list test ekpo records'.
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODYPERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
'Failed IDOC Analysis report'(020)
'xls'(021)
'IDOC_REP'(022)
CHANGING GD_ERROR
GD_RECIEVER.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
ENDFORM. " F_MAIL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM BUILD_XLS_DATA_TABLE.
*CONSTANTS: CON_CRET TYPE X VALUE '0D', "OK for non Unicode
*CON_TAB TYPE X VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE text-040 text-041 text-042 text-043 text-044 text-045 text-046 text-047 text-048 text-049
INTO IT_ATTACH SEPARATED BY con_tab.
CONCATENATE con_cret IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
clear IT_ATTACH.
loop at i_final_t into w_final.
CONCATENATE
w_final-mestyp w_final-docnum w_final-statxt w_final-msgno w_final-rvplant w_final-kunnr w_final-vbeln w_final-credat
w_final-cretim w_final-flag INTO IT_ATTACH SEPARATED BY con_tab.
CONCATENATE con_cret IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
clear IT_attach.
endloop.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
T_RECEIVERS-RECEIVER = LD_EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM. "SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM INITIATE_MAIL_EXECUTE_PROGRAM.
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
FORM POPULATE_EMAIL_MESSAGE_BODY.
data: l1(99) type c,
l2(15) type c,
lt_message type standard table of solisti1,
ls_message like line of lt_message.
clear ls_message.
l1 = 'Dear'(007).
l2 = 'Sir/Madam'(008).
concatenate l1 l2 ',' into
ls_message-line separated by space.
append ls_message to lt_message.
*insert Blank Line
clear ls_message.
ls_message-line = space.
append ls_message to lt_message.
*Assign Message text
clear ls_message.
concatenate text-011
text-012
into ls_message-line separated by space.
append ls_message to lt_message.
*insert Blank Line
clear ls_message.
ls_message-line = space.
append ls_message to lt_message.
*Assign Message text
clear ls_message.
concatenate text-013
text-014
text-015
into ls_message-line separated by space.
append ls_message to lt_message.
concatenate text-016
text-017
into ls_message-line separated by space.
append ls_message to lt_message.
*insert Blank Line
clear ls_message.
ls_message-line = space.
append ls_message to lt_message.
ls_message-line = text-018.
append ls_message to lt_message.
ls_message-line = text-019.
append ls_message to lt_message.
clear: ls_message.
REFRESH IT_MESSAGE.
it_message[] = lt_message[].
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY -
How to send a mail with attaching a report
hi gurus,
my requirment is i have to send a mail with attaching the report of a program to the client.. is it possible? help me with sample code.
Thanks in advance.
Regards,
Indira DHi Indira,
plz check out this code below,
*& Report ZATTACH *
REPORT ZATTACH .
TABLES: ekko.
PARAMETERS: p_email TYPE somlreci1-receiver
DEFAULT '[email protected]'.
TYPES: BEGIN OF t_ekpo,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
END OF t_ekpo.
DATA: it_ekpo TYPE STANDARD TABLE OF t_ekpo INITIAL SIZE 0,
wa_ekpo TYPE t_ekpo.
TYPES: BEGIN OF t_charekpo,
ebeln(10) TYPE c,
ebelp(5) TYPE c,
aedat(8) TYPE c,
matnr(18) TYPE c,
END OF t_charekpo.
DATA: wa_charekpo TYPE t_charekpo.
DATA: it_message TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: it_attach TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0
WITH HEADER LINE.
DATA: t_packing_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_receivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
t_attachment LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_object_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
w_cnt TYPE i,
w_sent_all(1) TYPE c,
w_doc_data LIKE sodocchgi1,
gd_error TYPE sy-subrc,
gd_reciever TYPE sy-subrc.
*START_OF_SELECTION
START-OF-SELECTION.
Retrieve sample data from table ekpo
PERFORM data_retrieval.
Populate table with detaisl to be entered into .xls file
PERFORM build_xls_data_table.
*END-OF-SELECTION
END-OF-SELECTION.
Populate message body text
perform populate_email_message_body.
Send file by email as .xls speadsheet
PERFORM send_file_as_email_attachment
tables it_message
it_attach
using p_email
'Example .xls documnet attachment'
'XLS'
'filename'
changing gd_error
gd_reciever.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM initiate_mail_execute_program.
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
FORM data_retrieval.
SELECT ebeln ebelp aedat matnr
UP TO 10 ROWS
FROM ekpo
INTO TABLE it_ekpo.
ENDFORM. " DATA_RETRIEVAL
*& Form BUILD_XLS_DATA_TABLE
Build data table for .xls document
FORM build_xls_data_table.
CONSTANTS: con_cret TYPE x VALUE '0D', "OK for non Unicode
con_tab TYPE x VALUE '09'. "OK for non Unicode
*If you have Unicode check active in program attributes thnen you will
*need to declare constants as follows
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
con_cret type c value cl_abap_char_utilities=>CR_LF.
CONCATENATE 'EBELN' 'EBELP' 'AEDAT' 'MATNR'
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
LOOP AT it_ekpo INTO wa_charekpo.
CONCATENATE wa_charekpo-ebeln wa_charekpo-ebelp
wa_charekpo-aedat wa_charekpo-matnr
INTO it_attach SEPARATED BY con_tab.
CONCATENATE con_cret it_attach INTO it_attach.
APPEND it_attach.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM send_file_as_email_attachment tables pit_message
pit_attach
using p_email
p_mtitle
p_format
p_filename
p_attdescription
p_sender_address
p_sender_addres_type
changing p_error
p_reciever.
DATA: ld_error TYPE sy-subrc,
ld_reciever TYPE sy-subrc,
ld_mtitle LIKE sodocchgi1-obj_descr,
ld_email LIKE somlreci1-receiver,
ld_format TYPE so_obj_tp ,
ld_attdescription TYPE so_obj_nam ,
ld_attfilename TYPE so_obj_des ,
ld_sender_address LIKE soextreci1-receiver,
ld_sender_address_type LIKE soextreci1-adr_typ,
ld_receiver LIKE sy-subrc.
ld_email = p_email.
ld_mtitle = p_mtitle.
ld_format = p_format.
ld_attdescription = p_attdescription.
ld_attfilename = p_filename.
ld_sender_address = p_sender_address.
ld_sender_address_type = p_sender_addres_type.
Fill the document data.
w_doc_data-doc_size = 1.
Populate the subject/generic message attributes
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle .
w_doc_data-sensitivty = 'F'.
Fill the document data and get size of attachment
CLEAR w_doc_data.
READ TABLE it_attach INDEX w_cnt.
w_doc_data-doc_size =
( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
w_doc_data-obj_langu = sy-langu.
w_doc_data-obj_name = 'SAPRPT'.
w_doc_data-obj_descr = ld_mtitle.
w_doc_data-sensitivty = 'F'.
CLEAR t_attachment.
REFRESH t_attachment.
t_attachment[] = pit_attach[].
Describe the body of the message
CLEAR t_packing_list.
REFRESH t_packing_list.
t_packing_list-transf_bin = space.
t_packing_list-head_start = 1.
t_packing_list-head_num = 0.
t_packing_list-body_start = 1.
DESCRIBE TABLE it_message LINES t_packing_list-body_num.
t_packing_list-doc_type = 'RAW'.
APPEND t_packing_list.
Create attachment notification
t_packing_list-transf_bin = 'X'.
t_packing_list-head_start = 1.
t_packing_list-head_num = 1.
t_packing_list-body_start = 1.
DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
t_packing_list-doc_type = ld_format.
t_packing_list-obj_descr = ld_attdescription.
t_packing_list-obj_name = ld_attfilename.
t_packing_list-doc_size = t_packing_list-body_num * 255.
APPEND t_packing_list.
Add the recipients email address
CLEAR t_receivers.
REFRESH t_receivers.
t_receivers-receiver = ld_email.
t_receivers-rec_type = 'U'.
t_receivers-com_type = 'INT'.
t_receivers-notif_del = 'X'.
t_receivers-notif_ndel = 'X'.
APPEND t_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
sender_address = ld_sender_address
sender_address_type = ld_sender_address_type
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
Populate zerror return code
ld_error = sy-subrc.
Populate zreceiver return code
LOOP AT t_receivers.
ld_receiver = t_receivers-retrn_code.
ENDLOOP.
ENDFORM.
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
Instructs mail send program for SAPCONNECT to send email.
FORM initiate_mail_execute_program.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
*& Form POPULATE_EMAIL_MESSAGE_BODY
Populate message body text
form populate_email_message_body.
REFRESH it_message.
it_message = 'Please find attached a list test ekpo records'.
APPEND it_message.
endform.
" POPULATE_EMAIL_MESSAGE_BODY
<b>
Reward points if this helps,</b>
Kiran -
Convert Screen(spool) to PDF file sending mail with attach file
Hi :
I'd like convert spool list to pdf and sending file...
so, I read thread about spool convert to PDF before,
and know how to convert Spool to PDF file and send mail with attach file.
but I have a problem.
my solution as:
step 1. Call function: "CONVERT_ABAPSPOOLJOB_2_PDF"
step 2. Call function: "SO_NEW_DOCUMENT_ATT_SEND_API1"
then, I got a mail with attached PDF file, but the PDF file display limited 255 line.( SO_NEW_DOCUMENT_ATT_SEND_API1 limited)
I want to showing word is wider that 255.
and then I find a manual method as:
After program finished.
Function Menu -> system -> List -> Send
use Prog: "Create Document and Send"
I use this prog sending mail and attached file ,
PDF file do <b>NOT</b> have 255 word limit !
finally. my question is, If I want sending mail as Prog: "Create Document and Send", how to do?
which Function I have to use?...
Please help me, Thanks!Hi,
Check this sample code of sending spool as attachment to an email address..
Parameters.
PARAMETERS: p_email(50) LOWER CASE.
PARAMETERS: p_spool LIKE tsp01-rqident.
Data declarations.
DATA: plist LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE.
DATA: document_data LIKE sodocchgi1.
DATA: so_ali LIKE soli OCCURS 100 WITH HEADER LINE.
DATA: real_type LIKE soodk-objtp.
DATA: sp_lang LIKE tst01-dlang.
DATA: line_size TYPE i VALUE 255.
DATA: v_name LIKE soextreci1-receiver.
DATA rec_tab LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
Get the spool data.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = p_spool
first_line = 1
last_line = 0
desired_type = ' '
IMPORTING
real_type = real_type
sp_lang = sp_lang
TABLES
buffer = so_ali
EXCEPTIONS
no_such_job = 1
job_contains_no_data = 2
selection_empty = 3
no_permission = 4
can_not_access = 5
read_error = 6
type_no_match = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE s208(00) WITH 'Error'.
LEAVE LIST-PROCESSING.
ENDIF.
Prepare the data.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 0.
plist-body_num = 0.
plist-doc_type = 'RAW'.
plist-obj_descr = 'Test ALV'.
APPEND plist.
plist-transf_bin = 'X'.
plist-head_start = 0.
plist-head_num = 0.
plist-body_start = 1.
DESCRIBE TABLE so_ali LINES plist-body_num.
plist-doc_type = real_type.
Get the size.
READ TABLE so_ali INDEX plist-body_num.
plist-doc_size = ( plist-body_num - 1 ) * line_size
+ STRLEN( so_ali ).
APPEND plist.
Move the receiver address.
MOVE: p_email TO rec_tab-receiver,
'U' TO rec_tab-rec_type.
APPEND rec_tab.
IF NOT sp_lang IS INITIAL.
document_data-obj_langu = sp_lang.
ELSE.
document_data-obj_langu = sy-langu.
ENDIF.
v_name = sy-uname.
Send the email.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = document_data
sender_address = v_name
sender_address_type = 'B'
TABLES
packing_list = plist
contents_bin = so_ali
receivers = rec_tab
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE e208(00) WITH 'Error'.
ENDIF.
COMMIT WORK.
Send the email immediately.
SUBMIT rsconn01
WITH mode = 'INT'
AND RETURN.
Thanks,
Naren -
i want to send mail with attachements. does wwv_flow_mail.send support this feature? how to do it?
thanks,Please check this thread..
Re: sending mails with attachment
Hope this helps.
Thanks -
Problem in sending mail with attachment
Hi All,
I am using the function module <b>'SO_NEW_DOCUMENT_ATT_SEND_API1'</b> to send mail with attachment.
the program executes properly and shows a message <b>'Document Sent'</b>. But neither the sent mail appears in <b>'SOST'</b> nor I get it on the specified email id.
Below is my code:
<b>***</b> As attachment I am sending resume whose contents are stored in table 'ZResume' corresponding to personnel no.(pernr) and serial No.(srno).
<b>START OF PROGRAM</b>----
REPORT ZPTEST_SEND_MAIL_ATTATCHMENT.
DATA : w_name TYPE sos04-l_adr_name.
DATA: RESUME TYPE table of XSTRING with header line.
START-OF-SELECTION.
<b>* Data Declaration</b>
DATA:
l_datum(10),
ls_docdata TYPE sodocchgi1,
lt_objpack TYPE TABLE OF sopcklsti1 WITH HEADER LINE,
lt_objhead TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objtxt TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_objbin TYPE TABLE OF solisti1 WITH HEADER LINE,
lt_reclist TYPE TABLE OF somlreci1 WITH HEADER LINE,
lt_listobject TYPE TABLE OF abaplist WITH HEADER LINE,
l_tab_lines TYPE i,
l_att_type LIKE soodk-objtp.
WRITE sy-datum TO l_datum.
SELECT SINGLE RESUME FROM ZRESUME INTO RESUME
WHERE PERNR EQ '00001182'
AND SRNO EQ '1'.
APPEND RESUME.
<b>* Because RESUME may be of size RAW(1000)
and objbin is of size CHAR(255) we make this table copy</b>
CALL FUNCTION 'TABLE_COMPRESS'
TABLES
in = resume
out = lt_objbin
EXCEPTIONS
compress_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
Error in function module &1
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
<b>* Create the message and send the document.
Create Message Body</b>
<b>* Title and Description</b>
ls_docdata-obj_name = 'Resume'.
ls_docdata-obj_descr = 'Resume'.
<b>* Main Text</b>
lt_objtxt = 'Resume of the candidate' .
APPEND lt_objtxt.
<b>* Write Packing List (Main)</b>
DESCRIBE TABLE lt_objtxt LINES l_tab_lines.
READ TABLE lt_objtxt INDEX l_tab_lines.
ls_docdata-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( lt_objtxt ).
CLEAR lt_objpack-transf_bin.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = 'RAW'.
APPEND lt_objpack.
<b>* Create Message Attachment
Write Packing List (Attachment)</b>
l_att_type = 'ALI'.
DESCRIBE TABLE lt_objbin LINES l_tab_lines.
READ TABLE lt_objbin INDEX l_tab_lines.
lt_objpack-doc_size = ( l_tab_lines - 1 ) * 255 + STRLEN( lt_objbin ).
lt_objpack-transf_bin = 'X'.
lt_objpack-head_start = 1.
lt_objpack-head_num = 0.
lt_objpack-body_start = 1.
lt_objpack-body_num = l_tab_lines.
lt_objpack-doc_type = l_att_type.
lt_objpack-obj_name = 'ATTACHMENT'.
lt_objpack-obj_descr = 'Resume'.
APPEND lt_objpack.
<b>* Create receiver list</b>
lt_reclist-receiver = '[email protected]'.
lt_reclist-rec_type = 'U'.
APPEND lt_reclist.
<b>* Send Message</b>
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = ls_docdata
put_in_outbox = ''
TABLES
packing_list = lt_objpack
object_header = lt_objhead
contents_bin = lt_objbin
contents_txt = lt_objtxt
receivers = lt_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc = 0.
Document sent
MESSAGE ID 'SO' TYPE 'S' NUMBER '022'.
ELSE.
Document <&> could not be sent
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH ls_docdata-obj_name.
ENDIF.
<b>END OF PROGRAM</b>----
Can anybody tell me where I am making mistake?
Thanks in advance,
PragyaHi Pragya,
Refer the code below. It's working fine and try to match up the things from your program.
REPORT ZSAMPL_001 .
INCLUDE ZINCLUDE_01.
DATA
DATA : itab LIKE tline OCCURS 0 WITH HEADER LINE.
DATA : file_name TYPE string.
data : path like PCFILE-PATH.
data : extension(5) type c.
data : name(100) type c.
SELECTION SCREEN
PARAMETERS : receiver TYPE somlreci1-receiver lower case.
PARAMETERS : p_file LIKE rlgrap-filename
OBLIGATORY.
AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR p_file.
CALL FUNCTION 'F4_FILENAME'
IMPORTING
file_name = p_file.
START-OF-SELECTION
START-OF-SELECTION.
PERFORM ml_customize USING 'Tst' 'Testing'.
PERFORM ml_addrecp USING receiver 'U'.
PERFORM upl.
PERFORM doconv TABLES itab objbin.
PERFORM ml_prepare USING 'X' extension name.
PERFORM ml_dosend.
SUBMIT rsconn01
WITH mode EQ 'INT'
AND RETURN.
FORM
FORM upl.
file_name = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = file_name
filetype = 'BIN'
TABLES
data_tab = itab
EXCEPTIONS
*file_open_error = 1
*file_read_error = 2
*no_batch = 3
*gui_refuse_filetransfer = 4
*invalid_type = 5
*no_authority = 6
*unknown_error = 7
*bad_data_format = 8
*header_not_allowed = 9
*separator_not_allowed = 10
*header_too_long = 11
*unknown_dp_error = 12
*access_denied = 13
*dp_out_of_memory = 14
*disk_full = 15
*dp_timeout = 16
*OTHERS = 17.
path = file_name.
CALL FUNCTION 'PC_SPLIT_COMPLETE_FILENAME'
EXPORTING
complete_filename = path
CHECK_DOS_FORMAT =
IMPORTING
DRIVE =
EXTENSION = extension
NAME = name
NAME_WITH_EXT =
PATH =
EXCEPTIONS
INVALID_DRIVE = 1
INVALID_EXTENSION = 2
INVALID_NAME = 3
INVALID_PATH = 4
OTHERS = 5
ENDFORM. "upl
***INCLUDE ZINCLUDE_01 .
10.08.2005 Amit M - Created
Include For Mail (First Req F16)
Modification Log
Data
tables crmrfcpar.
DATA: docdata LIKE sodocchgi1,
objpack LIKE sopcklsti1 OCCURS 1 WITH HEADER LINE,
objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE,
objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objbin LIKE solisti1 OCCURS 10 WITH HEADER LINE,
objhex LIKE solix OCCURS 10 WITH HEADER LINE,
reclist LIKE somlreci1 OCCURS 1 WITH HEADER LINE.
DATA: tab_lines TYPE i,
doc_size TYPE i,
att_type LIKE soodk-objtp.
DATA: listobject LIKE abaplist OCCURS 1 WITH HEADER LINE.
data v_rfcdest LIKE crmrfcpar-rfcdest.
FORM
FORM ml_customize USING objname objdesc.
Clear Variables
CLEAR docdata.
REFRESH objpack.
CLEAR objpack.
REFRESH objhead.
REFRESH objtxt.
CLEAR objtxt.
REFRESH objbin.
CLEAR objbin.
REFRESH objhex.
CLEAR objhex.
REFRESH reclist.
CLEAR reclist.
REFRESH listobject.
CLEAR listobject.
CLEAR tab_lines.
CLEAR doc_size.
CLEAR att_type.
Set Variables
docdata-obj_name = objname.
docdata-obj_descr = objdesc.
ENDFORM. "ml_customize
FORM
FORM ml_addrecp USING preceiver prec_type.
CLEAR reclist.
reclist-receiver = preceiver.
reclist-rec_type = prec_type.
APPEND reclist.
ENDFORM. "ml_customize
FORM
FORM ml_addtxt USING ptxt.
CLEAR objtxt.
objtxt = ptxt.
APPEND objtxt.
ENDFORM. "ml_customize
FORM
FORM ml_prepare USING bypassmemory whatatt_type whatname.
IF bypassmemory = ''.
Fetch List From Memory
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = listobject
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'LIST_FROM_MEMORY'.
ENDIF.
CALL FUNCTION 'TABLE_COMPRESS'
IMPORTING
COMPRESSED_SIZE =
TABLES
in = listobject
out = objbin
EXCEPTIONS
OTHERS = 1
IF sy-subrc <> 0.
MESSAGE ID '61' TYPE 'E' NUMBER '731'
WITH 'TABLE_COMPRESS'.
ENDIF.
ENDIF.
Header Data
Already Done Thru FM
Main Text
Already Done Thru FM
Packing Info For Text Data
DESCRIBE TABLE objtxt LINES tab_lines.
READ TABLE objtxt INDEX tab_lines.
docdata-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ).
CLEAR objpack-transf_bin.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = 'TXT'.
APPEND objpack.
Packing Info Attachment
att_type = whatatt_type..
DESCRIBE TABLE objbin LINES tab_lines.
READ TABLE objbin INDEX tab_lines.
objpack-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objbin ).
objpack-transf_bin = 'X'.
objpack-head_start = 1.
objpack-head_num = 0.
objpack-body_start = 1.
objpack-body_num = tab_lines.
objpack-doc_type = att_type.
objpack-obj_name = 'ATTACHMENT'.
objpack-obj_descr = whatname.
APPEND objpack.
Receiver List
Already done thru fm
ENDFORM. "ml_prepare
FORM
FORM ml_dosend.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = docdata
put_in_outbox = 'X'
commit_work = 'X' "used from rel. 6.10
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
TABLES
packing_list = objpack
object_header = objhead
contents_bin = objbin
contents_txt = objtxt
CONTENTS_HEX = objhex
OBJECT_PARA =
object_parb =
receivers = reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc <> 0.
MESSAGE ID 'SO' TYPE 'S' NUMBER '023'
WITH docdata-obj_name.
ENDIF.
ENDFORM. "ml_customize
FORM
FORM ml_spooltopdf USING whatspoolid.
DATA : pdf LIKE tline OCCURS 0 WITH HEADER LINE.
Call Function
CALL FUNCTION 'CONVERT_OTFSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = whatspoolid
TABLES
pdf = pdf
EXCEPTIONS
err_no_otf_spooljob = 1
OTHERS = 12.
Convert
PERFORM doconv TABLES pdf objbin.
ENDFORM. "ml_spooltopdf
FORM
FORM doconv TABLES
mypdf STRUCTURE tline
outbin STRUCTURE solisti1.
Data
DATA : pos TYPE i.
DATA : len TYPE i.
Loop And Put Data
LOOP AT mypdf.
pos = 255 - len.
IF pos > 134. "length of pdf_table
pos = 134.
ENDIF.
outbin+len = mypdf(pos).
len = len + pos.
IF len = 255. "length of out (contents_bin)
APPEND outbin.
CLEAR: outbin, len.
IF pos < 134.
outbin = mypdf+pos.
len = 134 - pos.
ENDIF.
ENDIF.
ENDLOOP.
IF len > 0.
APPEND outbin.
ENDIF.
ENDFORM. "doconv
FORM
FORM ml_saveforbp USING jobname jobcount.
Data
*data : yhead like yhrt_bp_head.
*DATA : ydocdata LIKE yhrt_bp_docdata,
*yobjtxt LIKE yhrt_bp_objtxt OCCURS 0 WITH HEADER LINE,
*yreclist LIKE yhrt_bp_reclist OCCURS 0 WITH HEADER LINE.
*DATA : seqnr TYPE i.
Head
*yhead-jobname = jobname.
*yhead-jobcount = jobcount..
*MODIFY yhrt_bp_head FROM yhead.
Doc Data
*ydocdata-jobname = jobname.
*ydocdata-jobcount = jobcount.
*MOVE-CORRESPONDING docdata TO ydocdata.
*MODIFY yhrt_bp_docdata FROM ydocdata.
Objtxt
*seqnr = 0.
*LOOP AT objtxt.
*seqnr = seqnr + 1.
*yobjtxt-jobname = jobname.
*yobjtxt-jobcount = jobcount.
*yobjtxt-seqnr = seqnr.
*MOVE-CORRESPONDING objtxt TO yobjtxt.
*MODIFY yhrt_bp_objtxt FROM yobjtxt.
*ENDLOOP.
RecList
*seqnr = 0.
*LOOP AT reclist.
*seqnr = seqnr + 1.
*yreclist-jobname = jobname.
*yreclist-jobcount = jobcount.
*yreclist-seqnr = seqnr.
*MOVE-CORRESPONDING reclist TO yreclist.
*MODIFY yhrt_bp_reclist FROM yreclist.
*ENDLOOP.
ENDFORM. "ml_saveforbp
FORM
FORM ml_fetchfrombp USING jobname jobcount.
*CLEAR docdata.
*REFRESH objtxt.
*REFRESH reclist.
*SELECT SINGLE * FROM yhrt_bp_docdata
*INTO corresponding fields of docdata
*WHERE jobname = jobname
*AND jobcount = jobcount.
*SELECT * FROM yhrt_bp_objtxt
*INTO corresponding fields of TABLE objtxt
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
*SELECT * FROM yhrt_bp_reclist
*INTO corresponding fields of TABLE reclist
*WHERE jobname = jobname
*AND jobcount = jobcount
*ORDER BY seqnr.
ENDFORM. "ml_fetchfrombp
<b>Please reward points if it helps.</b>
Regards,
Amit Mishra -
Send mail with attachment from webdynpro application
hi,
From a webdynpro application, the user will upload any files through the File upload ui element.These uploaded files has to go as an attachment in the mail which is being send to a particular ID ,when the user clicks the submit button in the form.
can you please give me the code regarding this and help me in sending mail with attachment from a webdynpro application.
Thanks in advance,
shami.Hai,
Properties props = System.getProperties();
props.put("mail.smtp.host", "xx.xx.x.xx");
Session session = Session.getDefaultInstance(props, null);
Message msg = new MimeMessage(session);
msg.setFrom(new InternetAddress("[email protected]"));
msg.setRecipients(Message.RecipientType.TO,
InternetAddress.parse("[email protected]", false));
msg.setSubject(subject);
msg.setText(body);
msg.setHeader("X-Mailer", " Email");
msg.setSentDate(new Date());
MimeBodyPart messageBodyPart = new MimeBodyPart();
messageBodyPart.setText("Hai , This mail Generated By the Program");
Multipart multipart = new MimeMultipart();
multipart.addBodyPart(messageBodyPart);
messageBodyPart = new MimeBodyPart();
DataSource source = new FileDataSource("C:\nag.xls");//Here you need to give the Path of uploaded File
messageBodyPart.setDataHandler( new DataHandler(source));
messageBodyPart.setFileName("nag.xls");
multipart.addBodyPart(messageBodyPart);
// Put parts in message
msg.setContent(multipart);
Transport.send(msg);
Regards,
Naga -
Send mail with attachment from the uploaded file
hi,
From a form thread i got the following code to send mail with attachment with the file uploaded from the file upload ui element.
public void onActionLoadFile(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
//@@begin onActionLoadFile(ServerEvent)
WDWebResourceType FileType = null;
String FileName = new String();
//get attribute info for context attribute 'FileUpload'
IWDAttributeInfo attributeInfo =
wdContext.getNodeInfo().getAttribute(
IPrivateEmailView.IContextElement.FILE_UPLOAD);
//get modifiable binary type from the attribute info,requires type cast.
IWDModifiableBinaryType binaryType =
(IWDModifiableBinaryType) attributeInfo.getModifiableSimpleType();
IPrivateEmailView.IContextElement element =
wdContext.currentContextElement();
//if a file in the 'FileResource' attribute exists
if (element.getFileUpload() != null) {
try {
String mimeType = binaryType.getMimeType().toString();
byte[] file = element.getFileUpload();
//get the size of the uploaded file
element.setFileSize(this.getFileSize(file));
//get the extension of the uploaded file
element.setFileExtension(binaryType.getMimeType().getFileExtension());
//NOTE: context attribute 'FileName' must not be set
//because the FileUpload-UI-element property 'fileName'
//is bound to it. Consequently the fileName is automatically
//written to the context after file upload.
//report success message
wdComponentAPI.getMessageManager().reportMessage(
IMessageEmailComp.SF_UPLOAD,
new Object[] { binaryType.getFileName()},
false);
FileType = binaryType.getMimeType();
FileName = binaryType.getFileName();
} catch (Exception e) {
throw new WDRuntimeException(e);
//if no file in the 'FileResource' attribute exists
else {
//report error message
IWDMessageManager msgMgr = wdComponentAPI.getMessageManager();
msgMgr.reportContextAttributeMessage(
element,
attributeInfo,
IMessageEmailComp.NO_FILE,
new Object[] { "" },
true);
//clear the FileResource context value attribute
//element.setFileUpload(null);
String URL;
URL = this.CreateAndGetPathFileUpload(
wdContext.currentContextElement().getFileUpload(),
FileName);
// if (URL.length() == 1){
// //ERRORE
wdContext.currentContextElement().setPATHFileUploaded(URL);
//@@end
public boolean send( java.lang.String subj, java.lang.String mess, java.lang.String dest, java.lang.String attach, java.lang.String FileName )
//@@begin send()
InitialContext ctx = null;
Address[] address = null;
Message msg = null;
Session sess = null;
MimeBodyPart bodyPart = null;
Multipart mp = null;
// "141.29.193.71" == milvl2ja.icn.siemens.it (SMTP di Siemens)
try {
Properties props = new Properties();
props.put("domain","true");
ctx = new InitialContext(props);
sess = (Session) ctx.lookup("java:comp/env/mail/MailSession");
msg = new MimeMessage(sess);
IWDClientUser utente = WDClientUser.getCurrentUser();
String senderEmail = utente.getSAPUser().getEmail();
InternetAddress addressFrom = new InternetAddress(senderEmail);
msg.setFrom(addressFrom);
String EmailDEST = dest;
InternetAddress addressTo = new InternetAddress(EmailDEST);
msg.setRecipient(Message.RecipientType.TO, addressTo);
msg.setSubject(subj);
// if ((mess != null) && (mess.length()>0)) {
// msg.setContent(mess, "text/plain");
// } else {
// msg.setContent("", "text/plain");
//Gestione ATTACHMENT...
String attachedFileName = new String(wdContext.currentContextElement().getFileName());
boolean hasAttachment = (attachedFileName != null) && (attachedFileName.length() > 0);
boolean isMultiPart = (mess != null) && (mess.length() > 1);
//adding an attachment makes the message multipart
if (isMultiPart || hasAttachment) {
mp = new MimeMultipart();
// add text parts
if (mess != null) {
for (int i = 0; i < mess.length(); i++) {
bodyPart = new MimeBodyPart();
bodyPart.setContent(mess,"text/plain");
mp.addBodyPart(bodyPart);
//attach the file to the message if needed
if (hasAttachment) { // avoid the case with no text parts
bodyPart = new MimeBodyPart();
bodyPart.setContent("Allegato incluso nel messaggio.","text/plain");
mp.addBodyPart(bodyPart);
// the part with the file
FileDataSource fds = new FileDataSource(attach);
MimeBodyPart attachmentBodyPart = new MimeBodyPart();
attachmentBodyPart.setDataHandler(new DataHandler(fds));
//URL URLattachedFileName = new URL(attach);
//attachmentBodyPart.setDataHandler(new DataHandler(URLattachedFileName));
attachmentBodyPart.setFileName(FileName);
mp.addBodyPart(attachmentBodyPart);
msg.setContent(mp);
} else {
if ((mess != null) && (mess.length() > 0)) {
msg.setContent(mess, "text/plain");
} else {
msg.setContent("", "text/plain");
//fine ATTACHMENT
msg.setSentDate(new GregorianCalendar().getTime());
msg.saveChanges();
address = msg.getAllRecipients();
Transport.send(msg, address);
} catch (Exception e) {
e.printStackTrace();
return false;
return true;
//@@end
When i used the same code in my application i am gett ing error in many places..
1)FileDataSource fds = new FileDataSource(<b>attach</b>);
attach cannot be resolved
2)attachmentBodyPart.setFileName(<b>FileName</b>);
fliename cannot be resolved
3)byte[] file = element.getFileUpload();
type mismatch cannot convert sting to byte[]
4)element.setFileSize(this.getFileSize(file));
method getFileSize() is undefined
5)element.setFileExtension(binaryType.getMimeType().getFileExtension());
method getFilExtension() is undefined
6)URL = this.CreateAndGetPathFileUpload(wdContext.currentContextElement().getFileUpload(),FileName);
method CreateAndGetPathFileUpload() is undefined.
7)wdContext.currentContextElement().setPATHFileUploaded(URL);
from the above error i can understand that only i have got the part of the code.
Please send me the complete coding.
some method definitions are missing....
Please help me to send the mail with attachment from the file uploaded from the file upload ui element.
Thanks in advance,
shami.hi,
I got this from the following link
Re: Attaching an excel file
plz help me ...
I am using 2004s with nwds 7.0.06.
also tell me what should be the type of the context variable FileUpload
Thanks in advance,
shami.
Maybe you are looking for
-
HT4623 i just update software in my iphone 3gs but at the end its not activating my iphone
i have updated software in my iphone 3gs by plugging wire with my laptop but at the end its not activating so, i just want to know how can i activate software update 6.1.2 on my iphone 3gs
-
my desktop picture is stuck in stretch mode and I can't seem to change it. Help!!
-
Hello, Pls let me know wheather the extensive use of cell defination in sap bw will haper the query performance while executing the report. Regards
-
Where does ATV2 get the photos?
So I have an ATV2 which seems to work well. I can't find any documentation as to where it gets the photos that are displayed while the screen is idle, say while playing music. This is probably a stupid question but I can't figure it out. I'd apprecia
-
Two weeks and battery keeps getting better
I have to admit I was frightened by how hard it was to keep a charge on the phone the first few days. I didn't believe everyone that said it got better. But now I have no worries about getting through my day with heavy usage.