Mail in Snow Leopard has broken. Keeps resending a large file attachment. Make it stop!

Our 2009 iMac running Snow Leopard has hit a snag with mail. After trying to send a bunch of attached photos, Mail stopped receiving messages and continually tries to resend the large message, even though we have done our best to delete it. Even when we do, a few minutes later, it will pop into the outbox again and start all over. We are now using Thunderbird but would like to get Mail back as it has all our organized folders on it. I've called our ISP and the problem is definitely with Mail, not our account. What now?

Hi Bee,
The attachents add up to 34.1 Mb.
The messages appear in a Recovered Messages (Telus) folder that shows up at the bottom of our list of folders. That folder fills up with copies of the 34.1 Mb email. After about 15 minutes there are 34 of them. I can only delete them one at a time after clicking on them. Trying to select all or batch delete unread causes mail to slow down to a crawl and affects all other applications. "Edit Message" doesn't seem to be an option.

Similar Messages

  • How do I fix Mail in Snow Leopard where I cannot send emails from my account to another account I've set up in Mail, but the reverse works fine?

    I have a problem with Mail in Snow Leopard in that I cannot set up two email accounts for myself and my wife with the same ISP and have them operate properly.  I've set up the accounts in strict accordance with my ISP's instructions for setting up email accounts on Mac Mail but I cannot send an email from my account to my wife's without a drop-down message appearing that Mail 'cannot send the email from this server.  Please edit the server list'.  No amount of tweaking appears to work.  Applecare consultants have so far been unable to get it to work and a recent visit to the local Genius Bar in the Apple Store was fruitless also.  My ISP's help line was unable to solve the problem even with a supervisor level consultant.  The ISP concluded it was some kind of 'bug' in Mail.
    I could send emails from my wife's account to mine, but not vice versa; I could send emails to other addresees without any problem and I can send emails from my account to my wife's using the ISP's webmail.
    Does anyone please have a solution to my problem?  At the moment we're operating one account (mine) on my Macbook and my wife's is set up on her iPad2.  As we prefer to use the Macbook for storage and (using Time Machine) for back-up of our data, the two accounts on separate machines is a nuisance.
    Another factor is that I prefer to control when I download emails and set my preferences accordingly.  One of the so-called 'fixes' that were tried wound up downloading emails regardless of settings, even after removing my wife's account; the matter was remedied only after I had removed all accounts form Mail and started afresh from scratch.

    You'll have to pardon my ignorance of some  computer terminology; I'm a retired manager and not a computer technician, hence my muddling up of client and server terminology.
    Re your comment about Port 339: I did qualify this with (?).  As I wrote, it all happened at lightining speed and the guy at the Genius Bar didn't bother explaining what he was doing.  Port designation contained 3s and 9s to the best of my recollection.
    That said, you seem to be spot on re setting up a 'dummy' client in Mail.  I set it up as you suggested and I can send to and receive from this client without a problem.  You appear to have identified the solution, notwithstanding the claims of the ISP's 'experts'.
    The next problem I have now is sorting out my wife's mailbox that is so troublesome whenever I set it up on Mail.
    All the other set-up advice to date yielded a similar result; inability to send from my account to her inbox.  Perhaps deleting her details from the account altogether and setting them up again from scratch may be the solution and I shall try that in due course.  The impediment that I have with this at the moment is that my ISP admits that it has 'a technical problem with its email servers' and some of its related web pages that prevent my doing this myself.  I will have to go through the telephone 'help' line and ask the technician to set it up at their end on my instructions.  This has some disadvantages in that I have to divulge the password to the account to the operator rather than keeping it anonymous by doing it on-line.   You may have solved the problem, but until I can successfully sort out a working mailbox for my wife i cannot definitively say so.
    Many thanks for your perseverance.  You've made more sense than anyone else so far and that deserves some points, surely?

  • Mail in Snow Leopard (starting from scratch, fresh install, POP gone?)

    Where is a good manual/FAQ/Help file that explains how to setup POP gmail accounts in the new Mail in 10.6??
    Did a fresh install on a new machine, and can't for the life of me figure out how to set it up (keeps selecting IMAP by default, no matter what I do, then when I setup a POP account it just sits there).
    How come it worked in 10.3, 10.4, and in 10.5 then in 10.6 it just acts all goofy and won't connect? Is this the definition of 'snappier'? I think so, because I'm about to.
    Thanks.

    Like you I did a fresh install and when setting up my gmail accounts found the only available option of setup to be IMAP. I found the fix to this ANNOYING ISSUE.
    Basically the auto-setup assistant that automatically starts in Mail w/ snow leopard looks to see if you enter "gmail.com" as your selected service and AUTOMATICALLY configures it to use IMAP instead of POP.
    Now I have tried going in and disabling IMAP and entering all the correct POP settings after the wizard completes setup but I could never get a functioning connection.
    The solution is to click the + sign to add an account but instead of butting "@gmail.com" change your address to "@yahoo.com". Type in the correct password and click continue. It will attempt to check the connection but will fail, click continue anyway.
    From here you will have to change the POP settings from the defaults for yahoo to those of gmail. Remember those are pop.gmail.com; username is your ENTIRE email address. Ensure everything is right and click continue.
    Again change the SMTP setting from those of yahoo to those of gmail's. Remember smtp.gmail.com!
    Click continue and finish the setup. Once the account is setup you will have to change your address from @yahoo.com to @gmail.com and you are finished. Your account should connect and work just like it always did.
    Kevin

  • Tiger Mail on Snow Leopard?

    I have been using Tiger's Mail program as my main mail application. Now I need to get my mail on my Macbook Pro.
    Problem is: Mail in Tiger has an option under "Edit", of "Paste as HTML". This works beautifully.
    In Snow Leopard this option has been removed, and although "Paste" does sort of work (with adding attachments for images), I get my quoted message mangled in replies from recipients of my html mails.
    Question: Can I instal and use Tiger Mail on Snow Leopard, and how should I go about it?

    You had me very excited for a moment there, Tom, when I saw how elegantly Safari does this, but...
    I do my html in Pagespinner, then preview in Safari. Safari > File > Mail Contents of this Page, does not deliver my images. (I suppose I could link to image files on a web server...)
    On the other hand, in Tiger, I select all, and copy in Safari, then Edit > Paste as html, in Mail. And my friends receive a perfect html email, with images and formatting.
    I just got my little G4 iBook back, and Tiger with it, so once again, I can do my thing , but I would dearly love a similarly elegant solution in Snow Leopard.

  • In Mail with Snow Leopard you could number your e-mails. Can this be done with Lion?

    In Mail with Snow Leopard you could number your e-mails. Can this be done with Lion?

    If you're referring to desktop icons, right click on the desktop > Show view options > check "show item information".

  • Apple Mail on Snow Leopard 1.6.8

    I'm aware this subject isn't new but still I find no solutions ....
    Hence, very many thanks to anyone who will help me to solve this substantial problem
    Since the unfortunate invention of Icloud my Apple Mail on Snow Leopard 1.6.8 no longer work properly.
    My machine:
    Model Name:          Mac Pro
    Model Identifier:          MacPro4,1
    Processor Name:          Quad-Core Intel Xeon
    Processor Speed:          3,32 GHz
    RAM 16 GB (Apple Original)
    Mail should take care of my me.com accounts, but I also have other accounts located elsewhere with a different suffix (.it, co.uk)
    I tried to set up Snow Leopard Mail following every single help tread here and at other websites. None of which seems to work properly, and the variety of "helps" simply tells me there is no "sound" system to use Snow Leopard with the current Apple Email set-up.
    Yet "randomly" Mail will stop loading my "me.com" mail opening an error message telling me the "me.com" certificate is no longer trustable.ù
    I instructed Apple Mail to "trust" the certificate, but this option does not work, or at least only works randomly.
    Mails also never recognizes and loads messages from my other suffix adresses. It enters in an endless connection asking to verify either my User or pass, to finally put these accounts offline. Using Safari with my user and pass (the same as in Apple Mail) everythings works well.
    More: if I am working on something else (Long Photoshop Actions, Final Cut Pro rendering and more), this window message halts everything.
    This problem is serious, as I usually performed this work at night. or when I don't need to stare at a screen doing nothing.
    I erased my computer with the 32 zero pass options and reinstalled the original Snow Leo system (MAC OS X 10.6.2) and this problem vanishes.
    As soon as I update with the Combo Upgrade the problem begins again.
    My upgrades are always "fresh updates" both as a direct update from the apple menu/Software update, or downloading the combo as dmg to then install.
    The result is exactly the same.
    I received a fresh copy from the local Apple Store in case my original had some magical problems, but nothing changed.
    Yet I can't simply use SL 10.6.2 (the original software I got with the Machine) as many programs I paid for require the latest Snow Leopard.
    While I could use another drive with SL 10.6.2, just for the Mail, is really a problem to reboot, to reboot again to continue my work.
    In my heart I certainly believe email these days is a "public service" especially after paying thousand dollars over the years, and Apple policy to force user to purchase their latest machines and or, waste time to reconstruct their previous work to adpat it to their industrial policy is simply not fair.
    While I understand and support advances in technology and so on, I believe this going forward shouldn't be done at the expenses of the customers, but "freedom of choice" is parts of all constitution as introduced centuries ago in the US.
    I read in various site Apple was planning a Snow Leopard 10.6.9 version, but so far nothing happened. Maybe this project was dismissed.
    Loosing important emails is a superior problem for my work.
    I "have" to use Snow Leopard because I need the Rosetta function Apple discontinued in Lion and Mountain Lion.
    Some readers might dislike this post, yet I used Apple since Apple II, I bought at least 100 machines since, I went through the various software/hardware changes, with ease. I believe my current anger is legitimate.
    Can someone please help?

    you can save a little time - since Mail is one of the Optional Install items found by running the same-named installer within the folder on the DVD. you'll still need the 10.6.7 combo afterwards.

  • I am upgrading from Tiger to Snow Leopard. I keep getting an error when I try to load the Mac Os x update combined. It says that it was corrupted during download. Have try loading from Apple website V10.6.7 upgrade combined but it still won't do it?

    I have an Intel Desktop iMac and I am upgrading from Tiger to Snow Leopard. I keep getting an error when it tries to load the Mac OS X update combined. It says that it was corrupted during download. Have try loading from Apple website  Mac OS X V10.6.7 upgrade combined but it still won't do it? Any other suggestions. The printer is not working either - I am not sure if they are connected. Everything else is fine.

    Please excuse, but I have to ask an obvious question: Did you already update using the Snow Leopard Retail install DVD? (You must do this first; 10.6.7 is just an update if you already have 10.6.) Are you, then, trying to update from whatever version was on the install DVD to 10.6.7?
    Otherwise, I'd keep trying. The 10.6.7 Combo is a huge update.

  • I have a mac os 10.5.8, i want to upgrade to mac os snow leopard, can i keep all my files (documents, music on itunes) without backing up all the files first on a external device prior to the upgrade?

    I have a mac os 10.5.8, i want to upgrade to mac os snow leopard, can i keep all my files (documents, music on itunes) without backing up all the files first on a external device prior to the upgrade?

    I strongly advise against upgrading the OS without first making a backup. Were something to go wrong you would lose all your files without the backup. See:
    How to Install OS X Updates Successfully
    A. Repair the Hard Drive and Permissions:
    Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally. 
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    B. Make a Bootable Backup Using Restore Option of Disk Utility:
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the external backup drive. Source means the internal startup drive.
    C. Important: Please read before installing:
    If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
    You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
    The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update.  While the installation is in progress do not use the computer.
    D. To upgrade:
    Purchase the Snow Leopard Retail DVD.
    Boot From The OS X Installer Disc:
    Insert OS X Installer Disc into the optical drive.
    Restart the computer.
    Immediately after the chime press and hold down the "C" key.
    Release the key when the spinning gear below the dark gray Apple logo appears.
    Wait for installer to finish loading.
    E. If updating:
    Download and install update(s) 
    Use Software Update, or
    Download standalone updater(s).

  • How do I import mail from Snow Leopard to Lion Mail?

    Tried dragging ~/Library/Mail files and folders across.
    But Mail insisted on my setting up an accounr (I have several) and put everything into that one account.
    Anyone know of a foolproof doc./url or checklist, please, which explains how to get everything that was in Snow Leopard Mail into Lion Mail?
    Thanks!

    similar "solution" for how to import ical from snow leopard to lion:
    1) copy the following files (e.g. from a snow leopard backup) prior to first opening ical:
    1a) ~/Library/Keychains/ (folder "Keychains")
    1b) ~/Library/Calendars (folders "Calendars")
    1c) ~/Library/Preferences/com.apple.iCal.* (ical preferences files, "com.apple.iCal.helper.plist", "com.apple.iCal.plist")
    1d) ~/Library/Preferences/iCalExternalSync.plist
    2) then open ical in lion ... import/update will follow
    if you have opened ical prior to the above steps these files (1b, 1c and 1d ) have already been created, so you have to replace them with your backups from snow leopard described above
    if you have set up calendar accounts in system preferences "Mail, Contacts & Calendars" you might have to delete them before applying the above steps
    ps:
    not quite sure if the following steps are necessary (or did help) for mail/ical import, because mobileme sync works now different in lion (no option for syncing calendars anymore within system preferences—>mobileme) ...
    i did a mobileme sync in snow leopard prior to the clean install of lion with:
    Calendars
    Mail Accounts
    Mail rules, Signatures, and Smart Mailboxes

  • How do I move all my mail from Snow Leopard to Lion?

    How do I move all my mail from Snow Leopard to Lion?

    alphiza wrote:
    How do I move all my mail from Snow Leopard to Lion?
    Did you update over Snow Leopard or clean install. Have you got your latest backup of Snow Leopard?
    Pete

  • Setting up icloud mail on snow leopard - what are the settings?

    I have converted my mobileme account to iCloud - but due to the hardware on my desktop must remain with Snow Leopard.  How do I set up the mail application to use my new iCloud email account.

    To properly set up iCloud mail on Snow Leopard 10.6.8 (Which is not supported).  You can do the following steps to manually set  up the account. (TRIED & TESTED)  ***Please know this may not work on all Macs running 10.6.8.
    If you have moved your MobileMe account to iCloud or have a straight iCloud account here are the steps for mail  There are no work arounds for Calendars, Bookmarks, or Contacts.
    There are 15 Steps total.
    If you are adding the account from mail preferences you will need these steps.
    Remove their previous account (after making sure anything important is backed up).
    Open the Mail application (On the desktop.  Looks like a Stamp w/Eagle) up on the Mac.
    Once you are there, click on "Mail" from the top menu bar and go to "Preference".
    Then go to "Accounts".
    Let me know once you are there. Do you see your MobileMe account on the left pane?
    Click on your MobileMe / iCloud account and then the to delete it.
    Then click the ( + ) sign:
    1) In the Add Account pane, enter in the full iCloud email address and password
    2) DONOT click 'Create' or it will try to automatically set up the account. Hold down Option and the 'Create' button will switch to 'Continue'. Click Continue
    3) For Account Type, change the drop down menu to IMAP
    4) Change the Incoming Mail server to imap.mail.me.com
    5) Enter the full email address for User Name.
    6) Hold down Option again and the 'Create' button will switch to 'Continue'. Click Continue
    7) Check the box to use SSL and make sure Authentication is set to Password
    8) Hold down Option again and the 'Create' button will switch to 'Continue'. Click Continue
    9) Change the Outgoing Mail server to smtp.mail.me.com
    10) Make sure the 'Use Authentication' box is checked.
    11) Enter the full email address for User Name and then enter the password
    12) Hold down Option again and the 'Create' button will switch to 'Continue'. Click Continue
    13) Check the box to use SSL and make sure Authentication is set to Password
    14) Click Create and Click Create again on the final pane.
    15) Done

  • Mail  for snow leopard

    is there a new mail that you must have to run mail on snow leopard?

    Right, I forgot, how silly of me. Once you set up an email account on a machine it's set up forever. Even after a fresh install on a new machine. What was I thinking.

  • I transferred files from a NAS server to the Mac Mini Snow Leopard Server and now some of the files have Custom Access and can't  be opened by some users.  How do I fix this?

    We're setting up our Mac Mini Snow Leopard Server, and in the process transferred files that had been stored and accessed from our Blackarmor NAS server over to the Mac.  These files were all created on PC's and are Office Excel files, WordPerfect files or PDF's.  When you look at the files on the Mac from the Mac and bring up Get Info for the affected file, it says that the file has Custom Access.  The files that work properly don't have that configuration.  I can access and open the files on some computers, but some users can't open the files from their computer even though they can see it.  We're all using PC's and they get the Error:  Access Denied-Contact your administrator--or something similar.  I've seen on the web similar issues and it may have something to do with ACL permissions.  I don't know enough about Mac OS to understand this, but what is baffling is that they can be opened from some PC's but not others, and all of the Users have the same accessibility to the files.  Thanks for a solution!!

    Oh, on the losing Internet, try this...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    PS. Your English is quite good & completely understandable.

  • After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive??

    After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive?? 

    Janet.b wrote:
    About 3 years old...pretty dated now I guess.  Am thinking I may just need to have it upgraded by a Mac tech.
    For what the Apple Store's charge you can buy almost buy a new computer.
    Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
    I did the drive replacement myself, got a faster drive of better quality for $300 instead.
    Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
    The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
    So you see what's going on here.
    I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
    They can offer more personalized care which you need. Clone your old drive to the new and everything.
    With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
    For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

  • When I upgrade to Snow Leopard/Lion - after installing it are my files deleted and my preferences changed?, When I upgrade to Snow Leopard/Lion - after installing it are my files deleted and my preferences changed?

    When I upgrade to Snow Leopard/Lion - after installing it are my files deleted and my preferences changed?, When I upgrade to Snow Leopard/Lion - after installing it are my files deleted and my preferences changed?

    If you install those new OS X versions over the top of what you already have, your files and preferences should remain.  However, it's a very good idea to have at least one complete backup of your Mac's disk before you try anything like that.

Maybe you are looking for

  • HT201365 I updated my phone yesterday and now it won't charge.  Is this normal?

    I updated my phone yesterday and now it won't charge.  Is this normal?

  • CS5 Bridge and Elements

    Hello,    I happen to have Adobe Photoshop Elements 8.0 Plus and Adobe CS5 installed on my desktop.Both programs work fine when using one or the other.My problem is if  I have CS5 Bridge open and highlight a photo that I want to open (right click ope

  • Office 2010 deployment through SCCM 2007 R2

    This might not be the right forum to ask this however I am going to take a chance...... I have deployed Office 2010 with Access (OCT)  to around 1000 devices. I now need to remove Access on all these devices or make it unavailable so users cannot use

  • RS232 Listener

    Hi, Currently, I am transmitting data via RS232 serial port, but i am wondering when the RS232 queue has new data avaliable for my application, should i use to a Listener (e.g. ActionListener) to proceed reading in the new data? OR should i check the

  • WPA-PSK wireless not accepting password

    For some reason I can't seem to connect to one in particular wireless internet router- It is using WPA-PSK security, and airport is telling me that I have an incorrect password although I am positive it is the correct one. I friend of mine determined