Mail messages are not visible

When I open a message in apple mail, the content does not show up. Just the to, From, Title etc. The body of the message is blank. I can sometimes quit mail and relaunch it and see the messages, but not always. It is not consistent with the same message. In other words some messages fail to be visible and then will be fine as others fail. In other words it is not link to any particular mail message, sender or mailbox.
I can see the first part of message in preview column, but opening the mail comes up white. Sometimes when I forward or reply I can see the string and have done that to read message.
Most of my business is done via email so an assistance would be helpful and appreciated.
Is there a way to rebuild a mailbox. I've tried exporting and reimporting the mailbox, but that did not work
I am running a Yosemite 10,10,1 on a 13" MBP (mid 2010)

Quit Mail. Force quit if necessary.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
          Envelope Index
          ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

Similar Messages

  • My other mail boxes are not visible in mail after upgrading to Mountain Lion

    my other mail boxes are not visible in mail after upgrading to Mountain Lion

    In the mailbox panel move your cursor slowly down the right hand side . Should reveal show and hide.

  • My voice mail messages are not appearing as they are left. Often no voicemails show up until 4 weeks after they have been left

    I am having trouble with my voice mail on the iPhone. The voicemails are not appearing until 3 even 4 weeks after they are left by a caller. Last night 10 voice messages came through all at once, one left before Thanksgiving. Is this an iPhone issue or an issue with the carrier?

    I'm having the same issue. It began three or four days ago. I'd notice that I'd miss a call but the person wouldn't leave a message.
    Two days later, suddenly three or four new voicemails will pop up from the past couple of days. The time stamp on the messages is correct-- it will show that the caller left the vmail a day or two before.
    Also, in what has to be a related problem, some of the voicemails appear to be corrupted and cannot be played.
    I have a 4s and my software is up-to-date. I have made no material changes to my phone, other than automatic software updates to explain this.
    It's enormously frustrating and as a job seeker, I can't afford to miss voicemails. Does anyone know if this is the phone or the carrier (AT&T)?
    Any help and input will be enormously appreciated.

  • Messages are not visible in moni

    Hi PI mates,
    i have peculiar problem in my porduction environment. Here is the brief description.
    "  Communication channel is picking up the file and archiving but not processing the file to the Integration Server but cannot see the message and message ID in MONI and communication channel
    It is not showing any message (Error/successful/Queue). This is in PI7.1
    When I test the same interface in Development server it is working fine. This problem is occurring only in PROD"
    i have changed the version of channel also but same problem..nex thing i gave wrong data that time it is giving error messages in Monitor and communication channel  moni.
    Kindnly look into this and give me solution if any of you faced kind of problem.
    Regards,
    Allamudi Loordh.

    Hello Allamudi,
    Can you elaborate more on your issue.
    1. Are you not able to view any type of messages in SXI_MONITOR. I mean sync and Async.
    2. Please check this blog from Michal
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1629
    3. You can see asynch messages in MONI, but are not able to view Synch messages, then
    in SXMB_ADM --> Integration Engine Configuration --> Specific Configuration --> Add the parameter ,
    Category --> RunTime LOGGING_SYNC set to 1.
    4. Also check you pipeline configuration in SXMB_ADM.
    I hope this should resolve your problem.
    regards,
    Younus

  • Mail folders are not visible

    When I open one of my mail folders and then return to the mailboxes list, the inbox is not visible. After advice I swiped the mail page from the screen and then reselected the mail programme. The inbox was then visible as normal. The situation repeats itself every time I open a folder and try to return to the inbox. It has now resulted in ny inbox emptying completely

    I have no clue how many were sold in the channel, and I have seen no claims about numbers yet from either Apple or at&t.
    I have no iPhone and have not tried to activate one, so I have no actual personal experience with the issues reported. Most appear to be oversights, primarily on the part of at&t, I think. The long activations periods due to existing Cingular account conversions, the ZIP code problems and the the credit holds all seem to be primarily a problem on their end. As some have pointed out, it doesn't appear that this system was properly tested in advance of activation.
    I do like the concept of iTunes activation: it's just unfortunate that so many experienced problems with it.

  • Report messages are not visible

    when i click on message reports in Operations tab. its not dipaying the report message. Instead it giving meassage like
    "Provider Not Available :JMS Reporting Provider is not deployed, or it is not active ".
    What i have to do in order to see report messages.

    It should be running by default. Is this your own local environment?
    You can check the deployment in WLS console. Click Deployments on the left and find "JMS Reporting Provider". Make sure that it is Active and if not, try to start it.
    If it is not there at all, try to deploy it from BEA_HOME\weblogic92\servicebus\lib\common (remember to start it).
    Hopefully that is all you will need to deploy.

  • Message processing not visible in RWB Message monitoring

    Hi Experts,
    There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
    Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
    When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
    Messages are visible in RWB Message monitoring.
    Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
    Thanks in Advacne,
    Seshu.K

    There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
    Check if you have chosen the Status filter as ALL and not "Error".
    If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
    To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

  • The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

    I have a 2 server SharePoint farm.
    All outgoing emails were working fine.
    I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
    The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
    Even if I setup Alert on some list, it doesn't send email.
    I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
    What could be the cause of this and how to fix it?
    EDIT
    I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

    This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
    AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
    I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

  • I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    I just switched from Outlook to Mail and now the sent messages are not being displayed.  Help, please.

    Back up all data. Rebuild the mailbox.

  • Mail 3, smtp, IMAP: sent messages are not saved on server

    Hello,
    I had problems using Mail 3 after I upgraded to Leopard, so I used Thunderbird for the time being. With the update 10.5.1 I tried again: most problems solved BUT: sent messages are not saved on the server in mailbox "Sent".
    Some background: I deleted the folder "<User>/Library/Mail" and "<User>/Library/Preferences/com.apple.mail.plist" and configured Mail from scratch.
    To be sure: I still have Thunderbird installed, and when I send with Thunderbird: a copy is placed in "Sent".
    Another thing I noticed: it takes more than a minute to send from Mail 3 and a few seconds when I send from Thunderbird. I have another Macbook Pro with 10.5.0 installed: same problem with sending.
    Any help is appreciated.
    rene

    Well, be stumped I did all that, but to be sure, I did it again:
    I have a lot folders with subfolders and they are shown under my account name.
    I created a new folder "test" in my IMAP account and designated it to be the new "Sent" folder. It replaces my previous Sent folder in the group Inbox, Drafts, Trash. My previous Sent folder now appears under my account name as a "normal" folder.
    I send a message and the Activity monitor says: +"Delivering message: copying message"+. After a minute Mail is done. I check my (new) "Sent" folder and it's empty. I double check in webmail: it's empty.
    So I go to the Finder and look in my IMAP folder: <user>/Library/Mail/<IMAP-account>/test.imapmbox and there is no folder "Messages", only Info.plist.
    Then I try to move a message to the "Sent' folder: for a minute the Activity moinor says: Copying messages: copying message" and then Mail prompts: +"The message "testing" could not be+
    +The connection to the server mail.hicetnunc.nl on port 143 timed out"+.
    So it looks like Mail has a problem with the default "Sent" folder: it cannot copy messages to that folder at all! Aha!
    But then I try to move a message to a "normal" IMAP folder: same thing! Mail cannot copy to any folder!
    In both instances Mail says: +"The message "..." could not be be moved to the mailbox "..."+
    +The connection to the server mail.hicetnunc.nl on port 143 timed out"+
    Last thing: I try to move a message to a folder in the same account again. But in the process I quit Mail. I open Mail again and Mail is performing pending operations: copying message. After a while Mail prompts: +"Operation could not be completed. (MFMessageErrorDomain error 1028.)"+ and crashes... I open Mail again and it tries to peform pending operations. Again: an error message and Mail crashes. This keeps going on so I delete the whole account and set it up again. Nothing's changed...
    I can receive and send, but sent messages are not copied to the "Sent" folder and I cannot move messages around within a IMAP account. But TADA!!!: I can move messages from account to account.

  • Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

    Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.

    Welcome to Apple Communities
    Mail doesn't support notes. If you use iCloud, you have them in it because Notes is an application

  • After downloading IOS 8.0.2 on my iPhone 5, my email messages are not automatically coming through.  I have to open my mailbox and wait for messages to download.  Do I need to reset or change settings for mail?  Please help.

    After downloading IOS 8.0.2 on my iPhone 5, my email messages are not coming through automatically. Before, my email messages would come through automatically and my iPhone would alert me each time an emial message was recevied.   I now have to open my mail in-box and wait for my email messages to download.  Do I need to reset or change my mail settings?  This issue is delaying my abiliy to receive and respond to email messages in a timely manner.
    Please Help.
    Jesse

    Hi Chris.  Thanks, for the suggestions re: my email issues.  They were helpful and yes I did check all items you referenced.  I even contacted Apple support and spent about 40 minutes on phone checking all settings.  However, after all these efforts, my mail and calendar issues were not resolved.  Apple Support finally recommended deleting the mail account and then reloading it - and it worked!  I am now receiving my emails and calendar appts. in real time again.
    Just wanted to share this in case anyone elest has a similar problem with mail/calendar after downloaing i.O.S. 8.1 onto iPhone 5.
    Thanks, again.
    Jesse

  • I have noticed recently that deleted e mail messages do not disappear from the screen.  Instead they turn grey until I switch to another mailbox.  When I return, they are gone.  Any idea why this has started to happen?

    I have noticed recently that deleted e mail messages do not disappear from the screen.  Instead they turn grey until I switch to another mailbox.  When I return, they are gone.  Any idea why this has started to happen?

    I have noticed recently that deleted e mail messages do not disappear from the screen.  Instead they turn grey until I switch to another mailbox.  When I return, they are gone.  Any idea why this has started to happen?

  • Conky new_mails not updating when local mail messages are read

    Apologies if this is the wrong place to ask this, but I'm new.
    I recently installed Arch Linux on my eeePC 1005HA laptop with dwm, conky, and postfix (I followed the wiki to install postfix to send local mail).  I'm using xsetroot to replace the "dwm-5.2" text in the upper right corner with conky-provided information about time, CPU usage, etc., and want to use it to see how many unread local mail messages are in my /var/mail/spool/USER spool.  Using ${new_mails} seems to be the way to go, but the value reported by ${new_mails} only ever increases when a message is sent to the spool, never decreasing when new messages are read or deleted until conky is restarted.  I'm only using the "mail" program to send and receive mail to the local spool for system notifications like "your battery is low, save things now".
    I've seen other users use ${new_mails} apparently fine, but googling for this problem shows other people having a similar problem.  However, I haven't found any forum, wiki, or article about how to fix this without using messy workarounds, and the conky IRC channel didn't know how to fix this, though they've heard of similar problems with mutt.  Any ideas?

    Bump!  I've tried reinstalling conky and postfix/mail, and not much seems to work.  Is conky passé now in favor of something else?

  • I've set up my Gmail account to auto forward messages to iCloud Mail but message are not being received. Can anyone help?

    I've set up my Gmail account to auto forward messages to iCloud Mail but message are not being received in iCloud Mail.
    Can anyone help?

    Try this out...  this worked like a charm:
    *On a desktop PC, log into your gmail account.
    *Click the gear up in the top right corner > Settings
    *Click Accounts
    *Under "Change Account Settings", click "Other Goole Account Settings"
    *Along the left, click "Security"
    *Under 2-step verification, click "Manage your application specific passwords"
    *It will ask for your usual gmail account password and take you to a page that says "
    Authorized Access to your Google Account
    *You will see a box to type in something (I just typed in iPad) then click "Generate Password"
    *It will generate a random password for you...  you will need this password Once in your iPad....
    Now...
    *Go to your iPhone Settings>Mail, Contacts, Calendars>Add Account>Google
    *Type in your name, your usual gmail email address and for the password, type in that random one generated on your PC
    It should work from there, if not follow what is below!
    *On a desktop PC, log into your gmail account.
    *Click the gear up in the top right corner > Settings
    *Click Accounts
    *Under "Change Account Settings", click "Other Goole Account Settings"
    *Along the left, click "Security"
    *Under 2-step verification, click "Manage your application specific passwords"
    *It will ask for your usual gmail account password and take you to a page that says "
    Authorized Access to your Google Account
    *You will see a box to type in something (I just typed in iPad) then click "Generate Password"
    *It will generate a random password for you...  you will need this password THREE TIMES in your phone or ipad....
    Now...
    *Go to your iPhone Settings>Mail, Contacts, Calendars>Add Account>Other>add mail account
    *Type in your name, your usual gmail email address and for the password, type in that random one generated on your PC
    *Next
    Incoming Mail Server:
    Host Name: imap.gmail.com
    User name: (your gmail email address)
    Password: TYPE IN THAT RANDOM PASSWORD AGAIN
    Outgoing Mail Server:
    Host name: smtp.gmal.com
    User name (your gmail email address)
    Password: TYPE IN THAT RANDOM PASSWORD AGAIN
    Done
    And allll the emails came rushing in   Hope this works for you!

Maybe you are looking for

  • Is there a cropping tool that also shows bleed boundaries?

    I am looking for a cropping tool or plug-in that can indicate bleed or wrap boundaries.  I have a visible canvas of 24x48, and need to crop to include 4" bleed on all four sides... so the printed image is 32x56.  But I want to see and manuever the cr

  • Mainstage 2 crashes only when playing live

    Hey guys, I was hoping somebody out there might have some help on this.  My mainstage rig works perfectly during practices, but has recently been crashing every single live show, randomly during songs.  I use EXS24, some built in organs and synths, K

  • How to disable filevault for a different user

    Hello all, I have a user who has emnabled FileVault on his account, running 10.6.8. When he logs in, he sees the spinning beach ball, nothing else. No desktop, nothing. How can I dsiable FileVault and get his account back to normal? Thanks in advance

  • IDoc DEBMAS07 - Change Pointer

    Hi. There is already created an outbound interface for sending customers to legacy system through IDoc > PI > SQL. As it was defined in DB52: Object      Table      Field DEBI      KNA1     LOEVM When users marks customer for deletion (t-code VD06 or

  • Re: j2me mp3 player code

    Please don't cross-post. http://forum.java.sun.com/thread.jspa?threadID=735062