Mail not picking up from Yahoo

My wife has an email account from Yahoo. Over the last few days she has been having a problem picking up email from the account.
She has an and older eMac (CRT) that is still running OS 10.4 (Tiger) and using Mail for email.
We have a DSL service from Verizon, and an Apple Airport WiFi system.
Yesterday and today she has had Mail not be able to pick up email from the Yahoo account.
The mail IS there on Yahoo web site and can be seen on their web page, but won't show up in Mail.
Sometimes she gets the emails, but the last time it left some of the email at Yahoo.
Any clues on what may be that problem, either with Yahoo, our internet connection, or Tiger/Mail?

Yahoo email hasn't been reliable for me. I get a lot of errors when yahoo goes to put a copy of my sent email in to the sent folder. I am using thunderbird with imap.
Does the wife have a paid account? I do and I think it is required for downloading your email.
The email pop protocol hasn't changed much so I'd think 10.3 would still be ok.
What to do?
wait.
Try another mail reader. set to leave on server. could try thunderbird with imap. not perfect.
Robert

Similar Messages

Garageband is not picking sound from builtin mic (rMBP). I recorded some tracks, now it is not working. All other apps can use the mic. Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.

Garageband is not picking sound from builtin mic (rMBP).
I recorded some tracks, now it is not working. I have checked GB Preferences, Audio/MIDI > Audio Input > Built In Microphone.
All other apps can use the mic. Dictation, Skype etc. can use the mic!
Monitoring is switched ON at GB, it picks sound only some other app, eg. Skype, is used to access the mic.
Can any one help me, Please!
Many thanks!

I have foud the solution - rather stupid. The system setting for audio input was at 70%, increasing it to 100% solves the problem!

R12 Staging in Linux (Autostage is not picking up from next dvd)

Hi,
I am doing the autostage using perl.
How to do?
anyone give - step by step in details.
Thanks in advance
Regs.
TS

Duplicate thread (Please post only once):
R12 Staging in Linux (Autostage is not picking up from next dvd)
R12 Staging in Linux (Autostage is not picking up from next dvd)

JMS Adapter is not picking messages from Topic ( AIA Error Notification)

Hi All,
One of my service is not picking messages from topic. This service was working in one environment but not working in this environment.
I am using AIA 2.5 and using AIAErrorNotification.
Service AIAAsyncErrorHandlingBPELProcess is enquing the message but consumer service AIAReadJMSNotificationProcess is not being invoked automatically.
Whenever we are manually invoking this service, then this service is dequing messages from topic.
Is any have any clue for this?
Thanks in Advance.
Edited by: vikky123 on Dec 22, 2010 1:46 PM

Increase Log level for cube.activation to debug and check the logs by stopping & starting the activation agent(I mean Retire and activate the process) .. It should give a clue on what's happening..

IOS mail not picking up mail from yahoo account

Hi guys,
few days ago i deleted some of my mail by accident, so i used yahoo's restoring email service to get my mail back.
after its restored all my mails are back, but on my iOS for some resason 'inbox' just not picking up any mails at all (old and new mails), all the other folders works just fine (e.g. sent, junk, trash and my persoanl folders).
I have tried to delete the yahoo account from iOS then reinstall it, still the same problem. but on my Mac's Mail everything is just fine.
I really dont know what do to next.
hope someone can help me out here,
thanks in advance!
ltrisotti
BTW my phone is iphone 5 and running on iOS7

Yahoo email hasn't been reliable for me. I get a lot of errors when yahoo goes to put a copy of my sent email in to the sent folder. I am using thunderbird with imap.
Does the wife have a paid account? I do and I think it is required for downloading your email.
The email pop protocol hasn't changed much so I'd think 10.3 would still be ok.
What to do?
wait.
Try another mail reader. set to leave on server. could try thunderbird with imap. not perfect.
Robert

Yahoo Mail not receiving attachments from Workflow Notifications

One of my clients uses Yahoo Mail and receives Workflow Notifications on their Yahoo Mail address. For some reason, file attachments are being removed within the Workflow Notification. I set up my own Yahoo Mail account and have the exact same issue.
Another issue is that the "view this item" link doesn't work at all within Yahoo Mail. However, the "mailto" link does work.
Has anybody else experienced issues with Yahoo Mail?

Hi,
If the yahoo user has admin access to the site then the attachment should appear within the workflow email.
If still experiencing such issue I would recommend raising a case so we can investigate this ASAP. Please include the users in question and also the email attachment or screencast so we can attempt to replicate within your case.
Admin -> help&support (to submit a case)
Thanks,
-Sidney

Purchase Order is not Picking Price from Info Record.

Dear All,
User had created a Shopping cart in and an automatic Purchase Order is created which is picking the material price from Purchase Requisition but not from Created Inforecord. As checked in P.R at item level it is found that in VALUATION tab there is a field named as " P.O PRICE " , here defalt t selected as " 1 A Gross Price "., Can u please help that from where this field is automatically selected as Gross Price in Purchase requisition.
Thanx n Rgds,
sap11

This is the config done in the OMET transaction where you will see the Adopt PO price field is checked and now this funcitonal authorization code e.g. 01 assgined to user profile in SU3 transaction agianst the parameter EFB.
if this is active than it will not take price from info record but it will copy from PR.
to avoid this kind of issue -
Remove the EFB value in SU3 for particular user or if user needs to have the EFB profile for some other requirements than go to OMET and remove Adopt po price indicator from that profile which is assigned to user

CUP- Request not picking approvers from BRF+ - 10.0

Hi,
We are on SP7 - GRC 10.0
We created the BRF+ conditions with business process and given user id as the Agent condition for approver. MSMP workflow was created with the above agent.
When we create a request it is getting successfully created but not appearing in the workinbox of Approver. We checked the Instant status and there it shows the path and the stage where it is but the Approvers column as blank.
We used the same conditions in SP 5 and no issues were identified. After upgrade to SP7 we are facing the issue.
Is there anything which is missed in settings?
Thanks and Best Regards,
Srihari.K

Hi Nikita & Joshita,
Further to above
We replicated the same scenario in our sandbox environment and it worked fine. But when it comes to Dev system its not working.
I observed the following difference in Agent Decision table from Sandbox & Dev
Sandbox:
Result Data Object
- Return all matches found
- Return an initial value if no match is found
- Return an exception if partial match is found
- Seggregate the result data object into its constituent elements
1) & 4) are checked and Result Data Object : GRFN_MW_T_AGENT [All these were taken by default]
Dev:
- Return all matches found
- Return an initial value if no match is found
- Return an exception if partial match is found
2) is checked and Result Data OBject : Result-Agent Rule
How these differences when both are on same SP 7. Is there any thing wrong in the above setting which needs to be corrected. Where the agent rule is not picking up the approvers ?
Thanks and Best Regards,
Srihari.K

Mail not Receiving Emails from Hotmail

Dear all,
I am using MacBook Pro, Intel Core i5, 4GB, OSX Yosemite 10.10.1 and my Mail Version is 8.1.
I am trying to import mail from my Hotmail account but it is not working properly. I have setup Mail to Pop (pop3.live.com) , removing the messages from the server after receiving mail.
However, after a few days using this configuration, there are still 39.000 messages left in the Hotmail server and the newest messages on my Mail software are dated on 25/09/2013, which means it is not getting messages from the Hotmail server as it should.
What could be happening here?
Thank you,
Eduardo

Uninstall the hotmail account and install it again.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Mails not getting sent from Receiver Mail Channel

Hi ALL
I have a File to mail scenario , I see chakred flag in SXMB_MONI ..but mail are not getting triggred from the Receiver mail adapter..
I gave the URL like this smtp://sxd123.abc.com
and the respective E-mail ID's
I dont see any message in the communication channel monitering also ..wht could be the reson.. ?
Thanks
Souz

Hi Dominic,
Since you are not seeing any entry in the communication channel (receiver), I think there is a problem with your configuration. Check whether you have used the correct channel (of type MAIL) in the receiver agreement.
Regards
Suraj

TS3899 Mail not getting messages from specific address

I am consistently not receiving emails from a specific address in my Apple Mail inbox, but I have no filters enabled and the emails are not showing up in my spam and trash folders. If I follow directions for retrieving an email header in Gmail, I am able to see the email, but this doesn't correct the problem! This problem seems to have surfaced spontaneously. What is going on?

HI ,
have at look at this link :
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/step%252bby%252bstep%252bmail%252bto%252bfile%252bscenario
It contains the scenarios with "Mail to File Scenario using the Transport Protocol as IMP4 " as well as "Mail to File Scenario using the Transport Protocol as POP3".
Have a look at them.
Thanks,
Pooja

Price id not picking automatically from Inforrecord ??

Hii experts
I have mainatined Inforecord a material with vendor combination , and i have maintained the price in inforrecord .
But while creating PO its asking for price manually ??
What i have to do for automatic prick pick up from Info record ??
Thanks
SAP-MM

Info Record Price Versus PO Price
The net price in the info record and the net price in the purchase order are two different prices.
The net price of an item in the info record is based on the conditions stipulated in the info record.
If you change the conditions, the net price in the info record is recalculated and the pricing date
adjusted accordingly.
In contrast, the price in the purchase order may reflect the deduction of a quantity discount
according to a price/quantity scale.
As a rule, the conditions from the info record are adopted in the PO. However, if a price/quantity
scale has been defined, the price for the relevant order quantity is taken.
Please check the steps to create info record:
Creating Info Record for Material w. Master Record
1. Choose Master data   Info record   Create.
The initial screen is displayed.
2. Enter the following information on the initial screen:
u2013 Vendor number
u2013 Material number
u2013 Number of purchasing organization or plant
Enter the number of the info record if external number assignment is used for info
records. If you leave the corresponding field blank, the system assigns a number
automatically.
3. Press ENTER.
The general data screen appears.
4. Enter the general data (data on vendor, order unit, origin data, supply option).
You can enter the customs tariff number without a certificate category.
5. Press ENTER.
The screen showing the purchasing organization data is displayed.
6. Enter:
u2013 Vendor's planned delivery time (used for scheduling)
u2013 Responsible purchasing group
u2013 Standard PO quantity (used for price determination in conjunction with price scales)
Check the control data. The tolerance data and the responsible purchasing group are
taken as default values from the material master record.
7. Enter the net price. You have two options:
u2013 You enter the net price per unit in the Net price field. This price includes the vendor's
normal discounts or surcharges only - cash discounts for prompt payment, for example,
are calculated separately.
u2013 You enter the gross price in the Net price field and then maintain the pricing conditions.
(To do this, choose Extras   Conditions.) The system automatically replaces the
entered gross price with the calculated net price.
8. Check the texts. Choose Goto   Texts to display the text overview. You can enter the info
memo or the PO text.
If the PO text is already defined in the material master record, it appears as a default
value.
If you change the PO text from the material master record, your new text is stored
directly in the info record. The changed text is suggested as the info record PO text when
a purchase order is created, and can be adopted in the new PO.
If you store the text in the info record unchanged, subsequent changes made to the PO
text in the material master record will not be included in purchase orders. To do this,
select the PO text, then choose Edit   Texts   Adopt text.
2. Save the info record.
Repeat steps 2 to 9 for all purchasing organizations and plants that are to be assigned to
the info record.
Edited by: Afshad Irani on Jun 23, 2010 12:34 PM
Edited by: Afshad Irani on Jun 23, 2010 12:35 PM

Smartview webf run time prompts upon submit are not picking up from the POV

Hi ,
I am in Planning 11.1.2.1 and using Smartview 11.1.2.1.103. After connecting to Planning Webform from Smartview, i am saving a composite form which should launch a Business Rule with run time prompts attached to the webform upon submit. The business rules are running with default run time prompts and it is not picking up the members from the POV ... is there a way to make it pick up the members from POV into the run time prompts upon saving it ? so far the workaround is to initiate the business rule from the planning tab in smartview .. any thoughts on this ? cheers

I found a known issue for smart view in 11.1.2.1 read me doc
11075506
When you open a data form in Smart View, if a business rule is directly attached to a composite data form that is set to Use Members on Data Form and Hide Prompt, the runtime prompt values are not picked up. Instead, the Runtime Prompt dialog box is displayed, and the user is prompted to enter a value.
Good Luck

Shopping Cart is not Picking Pricing from Inforecord.

Dear All Guru's,
Kindly help me in this matter , as i m creating a Shopping Cart and I have also created an INFORECORD for the material which m using in this Shopping Cart.Here in INFORECORD i had maintained SCALES in Pricing PB00 ( Gross Price ) , it is maintained as for Qty 1 the Price will be 500 EUR & for Qty 16 the Price will be 450 EUR.
As the Shopping Cart is created for Qty 16 , but even then the Price being picked is 500 EUR , But as per Scale Pricing the Price
picked should be 450 EUR as per Qty 16.
I m using this Scale Scenario first time in Shopping Cart , pl. guide me that is it really Possible to fetch Scale Pricing from INFORECORD to Shopping cart?
Also please guude that is there any mistake i had done in maintaining Pricing for Scales in INFORECORD ?
Thanx in advance.
Rgds,
sap11
Edited by: sap11 on Apr 22, 2010 12:19 PM

Hello,
As far as I know, the standard behaviour about which price should be displayed in the SRM shopping cart when you have an assigned info record to the cart is that the price would not be fetched from the backend to the EBP system.
In SRM, the SC shows the product price and not the info record one (as you have assigned the product to the SC).
You can use BBP_DOC_CHANGE_BADI to fill the info record price during the shopping cart creation.
However, as your shopping cart takes the info record price, perhaps this behaviour has changed in new release.
Question 6 of FAQ note 550071 refers to this topic.
Kind regards,
Ricardo

Create release not picking data from Requisition table

Hi All,
I have imported release data from 11i to R12 through Requisition import program. Data got imported successfully. I have updated BLANKET_PO_HEADER_ID and BLANKET_PO_LINE_NUM column in po_requisition_lins_all table. Then I have ran Create Release Concurrent Program but that program Not picking the release from Requisition table.
Can any one face this issue...Please let me know what thing i missing while doing this.
Thanks.

According to what I understand from your question, you have the Req successfully created but the the release is not happening when you run the create releases program.
You have to have a ASL for this item with release property as Automatic Release and the BPO document number attached in the ASL attributes.
Let me know if you have this setup or not.
Karthik.

Mail not picking up from Yahoo

Similar Messages

Maybe you are looking for