Mail not sent to External email address -SOST looks OK
Hi,
We've sent a report output to external email address.
When I checked in SOST it shows as sent.But the user did not receive it.
Could please advice what could be the cause of it.
Thanks,
Venkat
Check with your Basis admin - there could be many possible causes, including problems with the mail server on either side. Also try sending to another email - sometimes spam-filtering software filters are too strict on the receiving end.
This has nothing to do with ABAP IMHO.
Similar Messages
-
Hello,
I have a problem with a few emails i wrote which were in the outbox. The outbox disappeared all of a sudden with my mails... However they were not sent since the email address was not correct (just 3 initials). I was waiting to find out the correct email address of that person, put in in and then sen it...Is there a way to get it back somewhere on the ipad or in some cached folder?
Many thanks for an answe to this.
Swisslady2There is no cache where the emails would be stored on the iPad, but you could try quitting the mail app and then launch it again and see if the emails return.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Tap the home button. Then try mail again. -
2011 Office email merge issue - the email is not sent to the email address in excel file
When doing an email merge on my Mac with Office 2011 and Lion (10.7.3), the email is not sent to the email address in excel file. EX. the excel file email address is "[email protected]", but the merge is sending it to "[email protected]" - how do you specify with column in the excel file is the proper email?
HI Arkesh Sharma ,
you need to check below steps:
1. you need to check the mail server url is corrcet/not in smtp by using t.c scot
2. need to check r u provide correct user detils/not by using t.c su01.
and please go through below link :
PI alerts are not working
The specified item was not found.
thanks, -
HI,I am trying to update the apps on my phone.on doing so it tells me my account isn't verified and that an email to verify it has been sent to my email address.on looking at the email address there is a mistake and It will not let me change the email address.meaning I cannot verify my phone please help I'm so frustrated
Hello Charliedock,
The article linked below details a number of tips that can help locate the verification e-mail.
If you didn't receive your Apple ID verification or reset email
http://support.apple.com/kb/TS5404
Cheers,
Allen -
Email not sent to external email id
Hi All,
We have a particular user who is not receving the email notifications/ reminders to approve leaves on his lotus notes id.
Its only this particular user who is having this problem.
If i trace the workflow (leave sbmitted by his subordinates) the sending notification task has completed status but in SOST there is no record of a mail sent.
Have checked SU01 the user has an email address maintained both in ESS and R/3.
As per config SO16 - home address is selected.
In the profile his external email id is selected as home address.
what should i check next to sort out the issue.
Thanks & Regards,
Swati SahuHi Swati,
Try to maintain an auto-forwarding email address for this user using transaction SO36 and check if that solves your problem.
Regards,
Jigar -
Mail not delivered to external email ids
Hi,
I have configured the mail server in SCOT and i am able to receive mails to the Companies internal email ids, but if i send mails to external emails like gmail, it says
"No delivery to <external email id>, as recipient unknown"
but, the email id. is correct.
SAP Server ip addresses have been added to the relay list of the exchange server.
Following entries made in SCOT:
- The default domain
- Mail host and mail port
- * given in Address Area
- Node in Use ticked under General Information
Mails are getting delivered to internal email ids from SAP, problem is only when sending to external email ids. Please clarify.
Thanks and Regards,
NaguHi,
Check the link below
http://www.sapfans.com/forums/viewtopic.php?p=812935
Rgds,
Suman -
I have two IMAP accounts set up in Mail, one work and one personal. The personal account also receives emails from a third account (but I have that set up through gmail's forwarding, not Mail). I am sending emails from my work account and replies are coming to this third account, which I don't want to happen.
How do I make it so that replies to me are sent to the email address from which I sent my original message?
Thanks for your help!Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer -
How to disable mail forwarding to external email address
We had a serious security issue with people who had forwarded automatically using Apple Mail filters messages to an external email address.
We want to avoid in the future that a user in the Apple Mail program can create filters.
It should not be possible that the incoming mail is automatically forwarded by a user.Sorry, but unless you prohibit any access to Mail, what you're seeking isn't possible. As long as a user can send mail, they can forward it to whomever they like, even if they don't use any Rules.
-
I updated to iOS 8 on iPhone 5s and now iMessage will not verify my email address to use to send/ receive messages. It has said "Verifyng" beside it in settings since yesterday, but has not sent a verification email. I have also tried Adding it as a new email address several times, but get the same outcome. I can still send/ receive texts from my phone number, just not from the email address.
In my iCloud settings under Contact Information for that email address and it shows "pending". When I select "Resend Verification Email" I get "Cannot Connect to iCloud".Hello, Dorian071.
Thank you for visiting Apple Support Communities.
Here is the best article to reference when experiencing issues with iMessage activation issues.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H. -
How can you get your password sent to your email address I do not want to change my password.
If you cannot remember the passcode for the Screen Lock, you will need to Restore the device...
1) Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
2) If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/ht4097
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I have incorrectly entered an email address that is not valid. I have requested the change to the correct email but if cannot verify it as the verification email is being sent to the email address that I entered incorrectly and is invalid. Help!
Hey Givemepaperandapen,
Thanks for using Apple Support Communities.
For more information, take a look at:
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/he68
How to edit or change your Apple ID and primary email address
Have a nice day,
Mario -
Setting up using an external email address through MobileMe on the iPhone
I have an external email address set up in my Apple Mail desktop client and in the MobileMe web interface. It's an email alias that I have set up with a personal domain that I own. I have that alias set up to forward to my MobileMe account. For sending out from that address, I use my ISP's smtp server, both in my client, and in the MobileMe web interface. I want to also be able to send mail from this external account from my iPhone. I don't think there is a way to do this because when you set up a new mail account on the iPhone, it presumes you are using the smtp server of the email domain you are using, but I'm not, and there is no way during the set up process to set a specific smtp server to use (in this case, I would want to set it up so that the account would use my ISP's smtp server. Just wondering if anyone figured out a way to make this work.
I'd like to know this as well.
I finally managed to set Mail up in a way to use MobileMe but sent from my personal server AND display said address.
However, on my iPhone I can only send email with the "from" info [email protected] -
Mail not sent as an attachment
Hi,
I create a Service Process and then a Complaint for it by copying a material.
Next I click a Return Request, Subsequent Delivery and then Credit Memo. After this a mail will be sent to the Email address of Sold to Party.
The Email is generated using a Smartform. The output of Smartform should arrive as a PDF attachment in mail but it is not coming as an attachment.
It is coming as a simple mail. is there any setting to be made for this.
Thanks,
PrasannaHi Prasanna,
you can change this in transaction 'scot' (double click on SMTP --> Button 'Set').
Regards
Thomas -
We are a Exchange 2010 SP3 shop, we have distribution groups (with over 200 email addresses ) from another email system which has only external email addresses (i.e [email protected] [email protected] and so on …..)
We want to import these groups into exchange. we called microsoft, they said create mail contacts for each address and put those in a Distribution Group. I know this will work.
Our goal is to have the user create / maintain / add / remove external their own email addresses (Not the IT department)
There must be many companies whose requirements match ours. Are there third party tools that would handle creation of distribution list?
Any constructive advice would be greatly appreciated ! THank youI wouldn't give the ability to create contacts to everyone in the environment because it will become mess at some point of time and IT will have to jump to control it
anyway so why don’t from the start...
I would give this to certain people like Leads or Managers of the groups under certain IT Policy so it will be still under control and people
will think before asking their superior to create them and someone gets responsibility to manage these contacts...
Though here is the more specific article on how to delegate creating and editing contacts...
Creating RBAC Role To Delegate
Editing Contacts
Blog |
Get Your Exchange Powershell Tip of the Day from here -
Attach an Excel File with Email for External Email Address
Hi,
I want to send an excel file to an external email address as an attachement.
I am using the function module SO_NEW_DOCUMENT_ATT_SEND_API1 for sending the email.
But as far as I know we can only create and send the excel file in this FM. e.g. we can put the text manually and name the file as excel and add it as packing list and send the document.
Now, my client has a template in excel/word which he wants to send as an attachment always when he sends the mail. I have below Queries:
1. Where and how do i store the template which is in Excel or word? He doesnt want to upload the template each time he runs the report. Can I save the file on AL11? how do i insert the file in this?
2. I have tried standard texts, but his template contains a logo. So, I am not sure if that would work. Can I send the template in Binary and just aapend the file extension? xls or doc? would that do?Hi,
See if you can matintain the required templates in document management and use them in your reports.
Try the link below for reference.
[Document Management|http://wiki.sdn.sap.com/wiki/display/PLM/Templates-Document+Management]]
Regards,
Booma
Maybe you are looking for
-
I know this seems to be an emerging issue ever since the update to iTunes 11.1.4, some iPhones or other iOS devices are not showing up in iTunes or syncing. I'm not sure if Apple really knowns of this issue, but tech support has a (mostly) sure fire
-
Posting date issue for COGI records.
Hi all, I have one issue regarding the posting date for the records which are being cleared from COGI. _In case of MF47 (Postprocessing for REM) following is the behaviour,_ In this if GR has happened on say 1st and due to stock un-availability com
-
Keyboard and trackpad unresponsive on Late 2013 15" MBP Retina w/ Nvidia graphics
I just got my a new 15" retina MacBook Pro and am experiencing trackpad and keyboad unresponsiveness. The issue doesn't resolve itself with a restart. I can unblock myself by doing an SMC reset (http://support.apple.com/kb/HT3964?viewlocale=en_US&loc
-
Memory Leak in Sun's Demo Applets
After banging my head over some memory leak errors in an applet I wrote, I decided to try out one of Sun's applets to see if it too leaks memory. I loaded \j2sdk1.4.2_03\demo\applets\Animator\example1.html in IE6 (WinXP, JRE 1.4.2_03) and just left i
-
Problems with 10.4.9 and USB memory stick??
Since I've updated to 10.4.9 I'm having nothing but grief when using my Memorex USB 1GB memory stick. I use it for backing up crucial files (e.g address book, etc.) Now, when I attempt to copy files to the memory stick, the system goes into an infini