Mail notifications are not getting sent from a Calendar client

Mail notifications are not getting sent from a Calendar client
<p>
On the client, after creating an event and electing to send a mail notification,
the following error appears in a pop up box:
"module:mailmsg.ctp,label 190, service error"
Also, in the /users/unison/log/cws.log file on the Calendar Server, there is an
error from the corresponding time that the client receives one:
DEXOTEK ERRCODE Ox132B0 -> CWTCP_RemoteSecurityModified: RNC_SecurityModified
-> Request 0x443 for NodeId 10002,
status set to CANTSERVICE
Solution:
If this is only happening for one user, then check for the presence of a dbv.log
file in the /users/unison/log directory. If present this implies db corruption
and the /users/unison/bin/unidbfix tool should be run.
Note: For details on "unidbfix", please read the man page and also the online
Calendar Administrators Guide.

I am having the exact same problem sending through a comcast smtp server to a mac.com email address:
Reporting-MTA: dns; qmta11.emeryville.ca.mail.comcast.net
so some problem they are having in emeryville today? I too am waiting for it to clear up.

Similar Messages

Mails not getting sent from Receiver Mail Channel

Hi ALL
I have a File to mail scenario , I see chakred flag in SXMB_MONI ..but mail are not getting triggred from the Receiver mail adapter..
I gave the URL like this smtp://sxd123.abc.com
and the respective E-mail ID's
I dont see any message in the communication channel monitering also ..wht could be the reson.. ?
Thanks
Souz

Hi Dominic,
Since you are not seeing any entry in the communication channel (receiver), I think there is a problem with your configuration. Check whether you have used the correct channel (of type MAIL) in the receiver agreement.
Regards
Suraj

App testing phase: Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered

We are testing an app at work and Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered to these tow devices.
PUSH notification were delivered to some of the other iOS devices: (iPhone5 / iOS 6.1.4 and iPhone5 / iOS 7.0.3)

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

TS3276 my emails are not being sent from my desktop, but are capable of being sent by my apple phone. as well, I cannnot pull up any emails that I sent. They just disappear.

my emails are not being sent from my desktop, but they are capable of being sent from my iphone 5. Whatever I have sent just disappears from my desktop.

R1: Seems you didn't configure you email account in your Outlook client properly. please refer to the following KB article and try to create a new mail profile to configure your email account again:
http://support.microsoft.com/kb/2758902
R2: Do you want create subfolders under Inbox to category your emails? If so, we can just right click on Inbox > select New Folder... After that, we need to create rules to move or copy your emails to each subfoler. See:
http://office.microsoft.com/en-us/outlook-help/manage-email-messages-by-using-rules-HA010355682.aspx
Besides, in order to avoid confusion and keep track of troubleshooting steps, we usually troubleshoot one issue per thread in order to find a resolution efficiently. Concerning your other question, I suggest we create new posts for your other questions via:
http://social.technet.microsoft.com/Forums/en-US/home?forum=outlook
Thanks for the understanding.
Steve Fan
TechNet Community Support

Mails are not getting deleted from server

Hi
I am reading a mail from using java mail from my mail server.
When i am setting the message.setFlag(Flag.DETELED,true);
the mail is not getting deleted from the server.
I am not able to trace the problem, please help me solving this problem. It's a bit urgent.
store = session.getStore("pop3");
store.connect(hName, portNo, uName, pWord);
folder = store.getFolder("INBOX");
folder.open(Folder.READ_WRITE);
Message message[] = folder.getMessages();
System.out.println("Unread Msg Count : " + folder.getUnreadMessageCount());
int n = message.length;
for (int i = 0; i < n; i++) {
fromMsg = (message.getFrom()[0]).toString();
subMsg = (message[i].getSubject()).toString();
if (folder instanceof POP3Folder) {
POP3Folder pf = (POP3Folder) folder;
Part messagePart = message[i];
content = messagePart.getContent();
if (content instanceof Multipart)
messagePart = ((Multipart) content).getBodyPart(0);
String contentType = messagePart.getContentType();
Part messagePart = message[i];
content = messagePart.getContent();
if (content instanceof Multipart){
messagePart = ((Multipart) content).getBodyPart(0);
String contentType = messagePart.getContentType();
message[i].setFlag(Flag.DELETED, true);
store.close();
Thanks and Regards,
Luv Amieee...
xx

yeah true...
i did not close the folder.
i got to know from sun faq only later on yesterday.
but still.. thanks a lot...
luv amieee..
xx

Notifications are not being sent when Bulk Load is done

Hi All,
I have OIM 11g setup on my machine. I use the bulk load utility for loading the user data. Now in my OIM setup, the notifications are being sent for all stuff like Reset Password. New account creation and other. However when I bulk load the users, notifications are not sent to their mail ids. I am running the scheduled job "Bulk load Post Process" which is necessary so that the users are synced to the LDAP repository. I have the LDAP Sync option checked and also the Notifications option set to yes in this scheduled job. Though the users are loaded successfully and are synced properly, the notifications are not sent. Can some one please guide me as to what could be the problem here?
Thanks,
$id

The code is probably only called in the Event method of the event handler that sends the notification. You can check the mds files and find the notification you are looking for and then use a code decompiler to find the class that is called. You can then use this code as a sample, or write your own notification code and create an event handler that runs in the BulkEvent.
And on another note there is also this System Configuration Variable: Recon.SEND_NOTIFICATION which is set to FALSE by default.
-Kevin

Profile Imanges are not getting deleted from Profile Image library

Hi,
If I go mysite and edit my profile and set a profile images and save the changes. Image is uploaded to profile Image library in the root of the mysite.
I Edit my profile again and this time I remove the profile image and save the changes. Image is not getting deleted from the profile Image library.
as per my understanding it should get deleted. My site clean job is running. user profile is active in AD.
Thanks
Omkar

My first question would be is it a big deal if the picture doesnt get deleted from the libarary? My understanding is that the profile picture field is a URL link, the first time you add a picture it will provision 3 copies of differing sizes to the
library. When you "remove" the picture, it just empties out the picture URL field. Which is a nice hidden recovery if someone accidently deletes a profile photo they really wanted (Or if your company really locks down picutures so you only get
a choice of a couple avatars instead of a personal photo).
Similar issue:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/17bc8538-568f-4fff-8933-458fdba4b701/delete-user-profile-picture-in-sharepoint-2010-when-account-is-deactivated-or-deleted-from-ad?forum=sharepointadminprevious
and response:
Since the user photo library follows certain standards OOB:
http://iedaddy.com/2010/12/sharepoint-2010photo-management-for-social-mysites/
I would say just create a small script that will periodically read the UPS and make sure there are no photos sitting in the library not associated to an account... here's an example of accessing the User Profiles w/ Powershell:http://iedaddy.com/2010/06/sharepoint-2010-updating-user-profile-properties-with-powershell/
You would just modify it to delete image files whose name is not associated to an existing NTName in the UPS.
ieDaddy
Blog: http://iedaddy.com
Twit: @iedaddy

Weights are not getting copied from quote to order

Hi All,
While creating sales order items with reference to a Quote the weights are not getting copied (zero shown in weights) even though the material in quote has weight.
Why are the weights not getting properly from quote to order .

hi
goto VTAA and select the target document
click on Magnifying glass symbol
here check whether you have selected complete Reference or not
But if you select this then the system copies the source document completely.
Procedure
If you mark the field, the system copies the source document into the target document completely. The system also copies the complete reference indicator. You cannot change the indicator in the target document.
Regards

LAN was down ie Users are not getting ip from DHCP server after enabling DHCP snooping

Hi All ,
Enclosed file has network connectivity diagram.
1. L3 vlan's ie 2,3,4,5 and 6 are configured on ACC-CR1 and ACC-CR2.
2.Trunk is configured between Core switches ( CR1 and CR2) and access switches .VTP mode is transparent on all switches.L2 vlans are configured on all access switches.
3.DHCP is server is located at different location and is reachable over MPLS.
Without enabling dhcp snooping , users connected to access switches (Sw1,sw2,sw3 and Sw4 ) are getting ip address from DHCP server without any problem and everything is working fine.
But users connected to Sw3 and Sw4 are getting ip address from rouge DHCP server which is not pingable from any one of the switch.
So we have configured DHCP snooping for all vlan's on CR1 , CR2 , SW3 and SW4 and "trusted uplink ports" which are connected to WAN routers from CR1 and CR2 and also "trusted uplink ports " of Sw3 and Sw4 which are connected to CR1 and CR2.
As soon we have enabled DHCP snooping and trusted respective uplink ports , users are not getting ip address from remote DHCP server and even users connected to Sw1 and SW2 are facing same issue.
Note : DHCP snooping is not configured on SW1 and SW2.
Why users are not getting ip address from remote DHCP server as soon as we enabled dhcp snooping on Core switches and two access switches ie sw3 and sw4 ? what could have caused DHCP packets to be dropped ? Any idea would be appreciated .

Hi,
as you say: " HSRP is configured between CR1 and CR2 and Vlans are active on CR1" does it mean there are L3 intrefaces configured in each VLAN on your CR switches and ip hepler-address pointing to the remote DHCP server is configured on each of them?
I know it's difficult in a productive environment but IMHO you need to find out where are the DHCP offers dropped.
Either by enabling DHCP debugging or by capturing packets via Wireshark, e.g.
Best regards,
Milan

Outgoing emails are not being sent from my email address all of a sudden. It started happening when I changed my gmail password

After I changed my gmail password my outgoing emails are no longer being sent from my gmail account, but are being sent from my spouse's account so that replies go into her inbox, not mine.

rigoran1231,
You may have a corrupt preference, in order to correct this open Mail - Preferences - Accounts and re-input all the preferences for the account. While they may look ok one or more may be corrupt.

Imessages are not being sent from my desktop

have one of the newest imacs... purchased it a week after they became available. ive also got an iphone 5. everything works great with imessage.. can send from my desktop to other iphone users, etc. everything has been working great right up until 4 days ago. messages i tried to send would pop up with a red exclamation point and couldnt be sent. i tried rebooting, disabling the account and re-enabling. nothing seemed to work. i even tried reinstalling the os. still the same. its just this computer... i can function 100% on my macbook air.
im out of ideas and desperately need help.

Please read this whole message before doing anything.
Back up all data.
Quit Messages if it’s running.
Step 1
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash (either may not exist):
Caches/com.apple.Messages
Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
Leave the Library folder open. Log out and log back in. Try Messages again. If it works now, stop here. Close the Library folder.
Step 2
If you still have problems, quit Messages again. Go back to the Finder and move the following item from the open Library folder to the Desktop:
Messages
Note: you are not moving the Messages application. You’re moving a folder named “Messages.”
Test. If Messages now works, delete the Messages folder on the Desktop. Otherwise, quit Messages again. Put back the folder you moved, overwriting the newer one that may have been created in its place, and continue.
Step 3
In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
com.apple.iChat
com.apple.imdsmsrecordstore
com.apple.imessage
com.apple.imservice
Move them all to the Desktop. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Log out and log back in. Test again. This time Messages should perform normally, but your settings will be lost. You may be able to put back some of the files you moved to the Desktop in this step. Relaunch and test after each one. Eventually you should find one or more that causes Messages to malfunction. Delete those files and recreate whatever settings they contained.
If the issue is still not resolved, quit Messages again and put all the items you moved to the Desktop back where they were. You don’t need to replace the items you moved to the Trash. Stop here and post again.
If you later decide that you don’t like the results of steps 2 and 3, you can undo them completely by quitting Messages and restoring the items you deleted in those steps from your backup.

Manual discounts are not getting copied from Quote to Sales order

Hello All,
If I assign a manual discount to any item in Quotation document, this condition type with its discount amount is not getting
copied over to Sales order document, I have selected the drop down "D Copy all conditions" in the copy control for item categories,
and both quote & Sales order use the same pricing procedure, i am i missing something here?
I appreciate your help
thanks
Chandu

Hi Chandu,
Please try to adopt the standard pricing type in the copy control between QT and OR which is "A - Copy Pricing components Unchanged and redetermine Scales".
Please share the outcome.
Regards

Most iMessages are not getting sent on iOS 7/iPhone 5S

More and more, messages I send from my iPhone to another iPhone user throw an error message: "Not Delivered." I've done some testing on this, and it looks like it's worse - much worse - when I have an attachment (photo) involved. But here's what's REALLY weird...I tried sending a message to myself with an attachment. iMessage reported the same error message. Even stranger, some (but not all) of the messages are going through, even though they resolutely report an error.
Is there a way to fix this? It's driving me nuts. I end up having to call clients to see if they received my texts, which kinda defeats the whole purpose of texting.
Everyone I know with an iPhone and iOS 7 is having the same problem, either all the time or intermittenly.
Please HELP!
Brad

I've also been having this issue. I'm talking to Apple about it right now and they don't seem to have a fix for it. I've even tried the old Settings > Notification Center > Messages > Repeat Alerts > Never
That didn't even work and it's always been set to never repeat alerts. This is happening to me for iMessages. What will happen is, if I get two messages or more showing on the lock screen, either by unlocking my phone with a passcode or Touch ID, once I unlock the phone a banner of the most recent message received will show up at the top. It only happens if I receive more than one iMessage. If it's a singular iMessage or text message, it doesn't appear to happen. Apple wasn't able to help me out with anything. I tried a hard reset and that didn't work whatsoever. All of my settings are the same on my iPhone 5 running 7.0.4 that I was using only a few days ago and ever since using the iPhone 5s did this problem start happening. It may have something to do with having Touch ID enabled, but who knows.
Also, I am running 7.0.4 on this iPhone 5s as well, so for those of you saying there should have been a fix in it, there wasn't. If anyone is able to shed light on this, definitely let us know.

E-mail notifications are not working in my form

Formcentral:
I do not receive a notification when a user is sending the form.
I have checked help files here but found no answer to my problem.
I am the author of the form.
The mail I use is the same as for my Adobe ID.
I have chosen a "from" field - e-mail - in the form (Field is called "E-mail")
Help needed please!

Forgot to add this screen dump showing the set up:

Question on Mail, notifications are not working

I have 3 email accounts in Mail on my MacBook Pro, iPad 2, and iPhone 4. iPad and iPhone are working perfectly, zero issues. The MacBook is the one with the issues. My GMail account and work email are great, when I get a new email, it shows me "1" for one new email, or "4" for four new emails, they both work like they should. My iCloud account is the one with the issue. It ALWAYS says "1", like I have one new email. It will say this whether there is zero new emails, zero emails period, or 10 new emails. It just started today and I can't figure it out. Erased all the emails, still says "1", went to iCloud.com, no emails there, iPad and iPhone, no emails there, just the Mac thinks there is always one new email for iCloud only. Any thoughts besides the basics of restarting the application and computer? Thanks.

My iCloud account is the one with the issue.
Open System Preferences > iCloud
Deselect the box next to: Mail & Notes then reselect it then restart your Mac.

Mail notifications are not getting sent from a Calendar client

Similar Messages

Maybe you are looking for