Mail on my Mac Does Not Recognise my iCloud Password

I have transferred to iCloud from MobileMe today.The first problem I have found is that mail is not getting through to my Mac because Mail is not accepting my iCloud ID, I get a message as follows:"The iCloud IMAP server “p99-imap.mail.me.com” rejected the password for user “mathewson”" I know I have the right password - I have to use it to get onto this site.What can I do?

Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
Sometimes this happens, because the camera is not properly charged. In that case connect the camera to a charger or use a card reader.

Similar Messages

  • Mac does not recognise my admin password when I try to install updates

    I have followed the forget password instructions by installing the Mac OS X install disc and restarting and holding down c key etc and when I put my password in it is still not recognised

    Check the Accounts preference pane to make sure you are still listed as Admin. Check this out:
    http://support.apple.com/kb/TS1278

  • Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.

    Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.

    Although it has worked well so far today i-photo on my Mac does not recognise when I plug in my Sony camera so I can't download the video I just made.
    Sometimes this happens, because the camera is not properly charged. In that case connect the camera to a charger or use a card reader.

  • My Apple TV does not recognise My iTunes password. It works on all other devices but not Apple TV? Any ideas why or how to fix?

    Any ideas why my Apple TV does not recognise my iTunes password, when all other devices, including these communities are good with it?

    Hi Mick2291,
    Thanks for visiting Apple Support Communities.
    I'd suggest restarting, and then restoring, your Apple TV if the issue persists:
    Apple TV (2nd and 3rd generation): How to restart your Apple TV
    http://support.apple.com/kb/HT3180
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/HT4367
    Best Regards,
    Jeremy

  • HT204150 iCloud and my iPhone sync okay but my second Mac does not sync with iCloud. What's wrong?

    iCloud and my iPhone sync okay but my second Mac does not sync with iCloud. What's wrong?

    Check your settings in System Preferences > iCloud

  • I have forgotten my password to get into my mac bokok pro. I have used my iPad to reset the password but my Mac book does not recognise the reset password.

    I have reset my password using my iPad. Why does my Mac book not recognise it to allow me to log in to it?

    What password did you change and what password is your Mac requesting.
    Without details all you will get is guesses.

  • Mac does not recognise ipod nano.

    i am using nano for 8 months already.
    it had little problems till this day, and just resetting the nano would help to solve the recognising problems arised in the time being whatsoever.
    but this time i have an exclamation point on a folder on the screen, and it won't go away.
    when i try to connect the nano to my mac, it sees nano as a random hd (namely "apple ipod media"), but does not recognise it as "ipod nano" which we love and cherish when we automatically see it on dt and itunes if it's connected to our macs.
    a pop up comes to my screen when i connect nano to mac, i press initalize, and it opens disc utility. the program doesn't help me for restoring the ipod.
    using ipod updater as a restoring tool doesn't work neither (obviously).
    ...help?

    Try this:
    Windows 8.1, 64bit
    It appears that the 64bit install messed up the device drivers for the Apple mobilie devices connecting as USB.
    I tried many things, I may have missed a step below.  But the following is what I believe was the fix - since it worked on a 2nd PC.
    Make sure you are using an administrator account.  Any of them on your machine will do for the following
    a) Get Windows to restart the drivers:
        - disconnect your USB device and close ITunes
        - connect your USB device
        - if ITunes loads, close it.
    b) File explorer:
    Open File explorer and browse to
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    In that folder there should be a set of files named "usbaapl64...."
    right click on the one ending in "INF"
    Select Install.  It's very quick.
    remove the USB device
    c) Restart the computer.
    When you login again, load ITunes before you attach your USB device.

  • Server does not recognise user and password

    unable to email photos. server does not recognise user and password

    This is a quite interesting issue. Perhaps it may help if we start by trying to understand what caused the issue and then we will consider how you might recover from it.
    One of the things that Cisco wanted to do as they released version 15.0 was to improve the security of passwords in IOS. So they designed and implemented a new "type 4" password which they intended to replace the previous "type 5" password used for enable secret or for username secret passwords. So in those versions of 15.0 if you configure enable secret or username secret for passwords the IOS would create the new type 4 password.
    Then you reacted to some problem and loaded an older version of IOS. 12.2(55) does not understand the type 4 passwords. So as your switch booted on this version of code and it read lines in the startup config that had type 4 passwords it did not understand them and marked them as invalid input. So the result is that your switch does not have an enable secret and perhaps usernames do not have passwords.
    I do not know if you will be able to recover without doing password recovery but I have a suggestion which you can try. See if you can login on the console. It may depend on how your switch was configured whether it will let you do that and whether it will let you get to enable mode on the console. The default behavior was to allow the console to get to enable mode without a password. If your configuration includes aaa authentication enable default enable then the console may not work and in that case I believe that your only alternative will be password recovery.
    HTH
    Rick

  • Apple TV does not recognise my apple password

    after updating iTunes to 10 my apple TV 2 has stopped working have a network but cannot sign into itunes have reset password but does not recognise it was working okay till I upgraded itunes apple TV has latest upgrade

    i am having exactly the same issue now. how did you solve it?

  • MAIL on my MAC does not load any new mail or delete any mail in any of my other folders

    I've been having this problem for a couple of days now. Its as if MAIL just doesn't respond to anything. I can't get any New MAIL to load. And if i try to delete anything from SPAM, JUNK... and so on. They won't delete, they just show up again after deleting.
    I restarted the computer, and checked all my settings as well. I also uodated the computer.
    MAIL works from my iphone ans ipad. Just not MACBOOK PRO.
    Any help is appreciated.
    Jimmy

    Drafts, ToDos (Notes), and Outbox are found normally in the Mailboxes folder but do not usually appear in the On My Mac section. As for Deleted Messages that may be a remnant from before you used an IMAP account or if you at one time configured Mailbox Behaviors in Mail preferences to keep deleted messages locally instead of on the IMAP server.

  • Mail  on the Mac  -   does not ask for password

    I realize this isn't exactly a Safari topic, but I don't see a category devoted to Mail problems.
    I've just recently got a new cable provider and Mail is set up through them and it can send and receive mail ok.
    My problem is that I would like to set a password so that only I can see my email. I have a user name and password but Mail never asks for my password when I click to open the Mail application.
    What am I doing wrong ? Thanks for your help and if this question should have been placed under another category please let me know.

    Aloha!
    Try this... From the Menu Bar in Mac Mail, click Mail/Preferences. Select the Accounts tab. Click the Account Information tab.
    You will See: Incoming Mail Server/UserName/ and Password. If your password is stored there, just delete it. Close the Preferences window and click Save when asked to save changes.
    Quit the Mail application, then re-launch it. Click the Get Mail tab top left side of the window. You should be prompted for your password ... type it in but if you are prompted to Save it in your Keychain, click No.
    Will that do the job?
    Carolyn

  • I've upgraded to Mavericks. HP Scan no longer works to scan images from an HP Photosmart c309a yet the printer works. My Mac does not recognise this scanner as a scanner, only as a printer. How do I get my applications such as Preview to use this scanner?

    I've upgraded to Mavericks. Formerly HP Scan we used to establish communications with an HP Photosmart c309a all-in-one printer/scanner on my wi-fi network. As of the Dec 2013 update to Mevericks, it appears that HP Scan is now disabled and I cannot find this device as a scanner in System Preferences. I cannot connect to it in either Preview, Pages, or Photoshop Elements 8. Does anyone know a way of getting the OS to recognise this as a scanner?

    How was the printer added? Using AirPrint or the HP ppd? Since Mavericks defaults to adding an AirPrint printer with the AirPrint ppd, it might be necessary to add it again with the HP ppd, after making sure you have the HP drivers installed.

  • I have a panasonic Sdr-H85 my Mac does not recognise the camera. So I cannot get pictures or movies off the camera

    I have tried but this on my laptop and desktop computer. But neither computer see the camera. can some one please help. thanks.

    What type of cable are you using to connect the camcorder to your Mac? Are you tring to import into iMovie or just drag and drop the movies to copy to your internal HD?
    Clinton

  • I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas

    I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.

    Go to Finder > Preferences then select the General tab
    Make sure External disks is selected.

  • My Mac Book pro does not recognise the wi-fi net. How to fix it?

    My Mac Book Pro does not recognise properly the Wi-Fi net at home. I've tried many ways in "preferences", but it realy does not work. When connected in the Ethernet port, it works perfectly.
    Don't have any problems with other computers at home.

    I don't know what you mean by "doing new concessions on DHCP"!!???  Have you tried using a static IP address to see if it works that way?  Have you restricted the range of DHCP addresses available at your router?  If you have maybe the other computers have used up the available range.  Suggest you try a static IP address first, then we'll take it from there.

Maybe you are looking for