Mail RAM question

I set PUSH to off and FETCH to manually, question is, will it still use memory when it is running on background/multitasking? I've red somewhere that apps don't need to be necessarily removed from the multitasking, how about when MAIL (default app, yahoomail and gmail) is on the multitasking?

You do the following when you want to conserve battery:
Settings>Mail, Contacts, Calendars>Push>OFF
Settings>Notifications>Mail>Gmail>Notification Center>OFF
Settings>Mail, Contacts, Calendars>Fetch New Data>Off

Similar Messages

  • Topic area: Apple Mail.  Question:  How do I get the message preview window to display to the right of my list of email messages?

    Topic area: Apple Mail.  Question:  How do I get the message preview window to display to the right of my list of email messages? i.e. to preview whatever message is currently highlighted in the center window list of messages?

    At present there is no preference option available to move the preview
    pane to right side of the mail window.
    Best.

  • VERY SPECIFIC RAM QUESTION (not answered in prior topics)

    I have a very specific RAM question. I've been pouring through the discussions and I see TONS of stuff about the proper way to upgrade RAM. I've done that before without incident, but here is my dilemma:
    I'm using the 3.0Ghz, 8-core, MP currently with 8GB of the 667Mhz RAM (8x1GB). The memory is all matched from OWC and I have had no problems.
    I just bought 16GB of new RAM from OWC (4x4GB).
    I'm going to remove all 8 of the current 1GB DIMM's, and place two of the 4GB DIMM's in slots 1 & 2 on riser A, and two of the 4GB DIMM's in slots 1 & 2 on riser B. That will give me 16GB's in matched pairs on slots 1 & 2 of both riser A and B.
    My question is this: Should I install two of my old 1GB DIMM's in slots 3/4 of riser A, and two of the old 1GB DIMM's in slots 3/4 of riser B (for a total of 20GB's)?
    I've read that having all 8 slots filled = better performance but I'm not sure the mix of 4GB DIMM's and 1GB DIMM's.
    Any Thoughts?
    Thanks So Much,
    Tom

    Optimally you want matched quads in each Riser. However, Bare Feats did some memory benchmarks that you might wish to read regarding memory performance versus different configurations. As for proper installation see the following:
    Mac Pro memory arrangement photos;
    Mac Pro Memory Configuration.

  • HP dv9629ca Laptop (Ram Question)

    Here is a RAM question. The Laptop had 2 one Gigabyte SO-DIMMs with them both installed the PC would not boot. the lights would come on but the screen remained black. I thought it was a RAM problem since when I would only put in a single stick of RAM the computer Booted no problem. I figured the one ram was BAD. Yet when i bought a 2GB SO-DIMM and added it to the 1GB already inside the computer wouldn't boot just like before. so I removed both rams and Put the 2GB stick in where the other was working and It shows 2GB now. I Know the Laptop maxes out at 4GB of RAM with a 64bit version of Windows installed. Is it possible to find a 4GB SO-DIMM and put it into the Slot that works or will it only accept a maximum of 2GB per Slot?
    Laptop Details
    AT newegg.ca they have a Single SO-DIMM that is 4GB the Laptop Max is 4GB. Not sure if it would read 4GB coming from a single SO-DIMM

    Here are the specs for your HP Pavilion dv9629ca Notebook Computer and here is the HP Pavilion dv9500, dv9600, and dv9700 Entertainment PC - Maintenance and Service Guide for your computer. Both pieces of information indicate that 4GB (2 X 2GB) is the maximum. 2GB is the largest size supported in each slot.
    You may wish to clean the slots or reseat the memory... you may also want to inspect the slots for debris or bent contacts. 
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • DKA790GX Platinum RAM questions

    Hello everyone.  I've done quite a bit of thinking about what direction to take for my next computer and I've decided that I really like the features that the DKA790GX Platinum motherboard has to offer.  However, I've heard some people say that they've had issues when dealing with DDR2 1066 RAM not on the MSI board specifically, but other 790GX based motherboards.  Will DDR2 1066 run in dual channel mode with a Phenom processor installed?  Some people have said that it wouldn't.  I plan on getting 2x2GB chips for a total of 4GB of RAM if that information will be of use.  Secondly, I've been eyeing some of the high end Mushkin memory since I've had nothing but great luck with them.  This memory uses 2.0 - 2.1 volts.  I don't think it would be a problem, but the motherboard specs specifically say that 1.8v memory is the standard supported.  Do you think that all will be well when using the higher voltage memory?
    I guess I have one more question before signing off that doesn't have much of anything to do with RAM.  I'm foregoing getting a Windows OS for this computer initially due to the possibility that MS will be releasing Windows 7 on the market sooner than anticipated (supposedly in the first half of next year).  If that OS turns out to be a great deal better than Vista, I'd rather just purchase an OS once rather than upgrade 6 months or so later.  Having said that, I plan on using Linux (Ubuntu 8.04) until I can make a good decision on which version of Windows to support.  How would I go about upgrading my BIOS since I won't have a Windows OS initially?  I just looked through the readme and it still says to use an ME or 98 boot disk to flash the BIOS.  I figured maybe somebody else may give me some tips on doing this outside of Windows.  That would be greatly appreciated.  Thanks for all advice that you can give me.

    The cpu is designed to run four sticks, but at 1.8 volts.  That's where the catch is because most memory rated at 1066 uses higher voltages  The Bios Kernal Developers Guide AMD has posted on their web site from April does indicate what you are stating, but if you contact AMD support, they will tell you otherwise.  I swear AMD is still beta testing Phenoms long after they were released.  Running the memory I have at 1066 is not supported by AMD, only 1.8 volt memory is.  If the bios is written by the motherboard manufacturer to support the memory as mine obviously is on this board, it will work.  Since MSI has gone to the trouble of supporting this memory and it is some of the first 1066 sticks made, I have to believe most other 1066 memory using voltages other than 1.8 will work.  Below is the response I received from AMD several months ago on this issue concerning another manufacturer's board that is now in the trash for other issues.  The manufacturer in their qualified vendors list stated the memory would work, but it never did.  The e-mail is several months old now so one of the links no longer works.  Not knowing the forum rules here very well, I did block the manufacturer's name and the tech's name.  In the e-mail and in a follow up phone call, AMD is saying if the memory doesn't work, the motherboard manufacturer needs to fix the bios.
    Dear Customer,
    Thank you for contacting AMD Customer Care.
    AMD Phenom processors are able to support four DDR2-1066 memory modules which are JEDEC certified to operate at 1.8V.
    Please be informed that the Kingston memory modules that you have is only certified to function within Jedec specification at 800MHz at 1.8V.
    The 1066MHz specification validated by Kingston is out of spec and may not work.
    You may either wish to check with A*** for updated BIOS support or run the 4 modules in DDR2-800 mode.
    I have included the following links for your reference:
    http://www.amd.com/us-en/Processors/ProductI
    http://www.valueram.com/datasheets/KHX8500D2_1G.pdf
    AMD Customer Care

  • Mail adapter question

    I have a question regarding the mail adapter scenario.  Firstly data goes to ECC and some validations are performed and if there are any errors, ECC will provide me with some indicator saying this record has errors.
    Now, the same structures are used in the opposite direction and I have to count the number of error records based of that and send that info as an email. If I created a UDF to count the number of error records, how do I put that information in the email ?
    Is there anyway, I can capture that info in the mail adapter ?
    Any useful links will be appreciated.
    -V

    being from a Java background is that every method/function declaration is supposed to have the return type and I was told that behind the scenes Java is being run which is why I assumed that thats a return type.Again,  I am fairly new and I am in the process of learning things.
    For simple UDF (cache = Value), returns string.
    For advanced UDF (Cache = Context or Queue), returns array of strings.
    The problem is I did not understand the use of ResultList class in this case.
    Refer this -
    http://help.sap.com/saphelp_nw04/helpdata/en/7d/028c4057d5701de10000000a1550b0/frameset.htm
    use queue execution types but I am a little bit confused as to the usage of that.
    Because of u201Cqueueu201D function, the arguments that we define automatically become arrays, because PI is assuming that we want to operate on multiple input values with this function. That's the reason you are able to traverse through each and every value of the field "ecode".
    Any useful example would be appreciated.
    Refer this:-
    http://wiki.sdn.sap.com/wiki/display/XI/JAVAFunctionsin+XI
    http://help.sap.com/saphelp_nw04/helpdata/en/40/7b8e40496f6f1de10000000a1550b0/content.htm
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=79955426
    I am fairly new and I am in the process of learning things.
    No short-cuts study and hands-on.

  • Mail report question

    Hi there,
    This may be a crazt question but I was curious if there was a way to get information from apple mail in report format.
    I would like to create report showing waht folder the email is in.
    My reason for doing this I seem tobe missing emails.  So instead of going in to each folder, I wondered if I could generate a report of some kind to do it.  Maybe an Applescript?  I do not know how to create scripts.
    Or is there a way to add an additonal header in MAIL that would show the folder the email is saved in?
    Thanks and I look forward to your reply.
    ...Bruce

    OK, so first some background:
    1) The basic process goes like this:
    a) one release doc (edited by the developer, presumably) and the
    template docs are copied to the build area
    b) Each doc is unzipped (ODT's are just ZIP files) into a subdir
    c) The doc contents are copied around; this is to allow Ant to
    replace its special @VAR@ variables in the document content
    d) The docs are zipped back up into ODTs
    e) The ODTs are converted into PDFs using OOo's macro functionality
    Here are the troubleshooting steps I would apply:
    1) Make sure the external.odt file exists - check the build area
    (//content/build/<pluginname>/tmp/) and can be opened using normal
    OpenOffice
    2) Check that the release.odt file exists (same location) and can be
    opened using normal OpenOffice
    3) See if you can manually convert the external.odt file into a PDF -
    the command we use is simply:
    soffice -invisible
    macro:///Standard.Collectors.External2PDF(${pkgdir}/tmp/external.odt)
    (replace ${pkgdir} with the build directory path).
    If all that works, then the Ant build process should work.
    Also - what does that OpenOffice error popup say?
    DCorlette
    DCorlette's Profile: http://forums.novell.com/member.php?userid=4437
    View this thread: http://forums.novell.com/showthread.php?t=416875

  • Mail app question

    well obviously i just got the new upgrade, but the question is how do you delete a mail account you already have on the ipod touch?
    i tried manually putting one in and then later on synched it with my Mac, so now I have two of the same account (one that works and the other one doesn't). I don't see a delete button for individual accounts anywhere.
    thanks

    LOL - no way.
    It's all new, so we have to start over.
    Please mark as resolved for others seeking answers.
    Scott

  • Mail forwarding question

    Hello,
    I have added mail forwarding throguh delegated admin for a user.
    The issue I am observing is the mail box which has forwarder entry also has emails and they are not getting deleted.
    My question is whether can I set something where in the message gets deleted after forwarding it.
    I am using iPlanet Messaging Server 5.2 HotFix 1.20

    You are indeed using an old version of Messaging Server.
    5.2p2 is available free, and is later than what you're using.
    5.2hf1.10 is current, and is available through Tech Support.
    All that being said, when you turn forwarding on, you likely left "mailbox" delivery on. that means that the messages will be both forwarded AND delivered to the mailbox.
    Uncheck the "mailbox" delivery, and you won't see messages getting delivered there.
    The DA will show a checkbox next time you go that user, though. Not to worry....

  • Mail syncing question

    Hi,
    the scenario is this:
    On my macbook, 10.6, one of the POP accounts is acting strange. It's a BT internet account. Symptoms are it starts to download messages and just gets stuck. Also duplicates are appearing. I've tried deleting the message from the server via webmail, and recreating the account. The messages do reach the iPhone no problem.
    So , i'm assuming that there's something lurking inside "My home directory"/Library/Mail.
    I'm going to delete this Mail folder, along with Mail preferences.
    The question is, can i sync the accounts (one bt internet, the other @me.com) from my iPhone / ipod to the Macbook via either MobileMe or iTunes?
    Am i right in thinking that you can sync accounts from a desktop / laptop Mac to an iPhone / iPod, but you can't do the reverse?
    Many thanks in advance.

    The +iPod touch+ doesn't offer Mail syncing. All it does is sync the account details. Emails are downloaded separately when you next get a suitable WiFi connection. 
    mrtotes

  • MAIL certificate question

    Lately I get a question box when I open MAIL.   I have Snow Leopard, and opted to keep Mobile Me at the switch this summer.   It has been working just fine,
    same as always with no change.  Now I get this:    note:  {   }   is a description from me for something I can not create here
    Verify Certificate.    
    The certificate for this server is invalid.  You might be connecting to a server that is pretending to be "mail.me.com" which could put your confidential infirmation at reks.  Do you want to connect to the server anyway?
    ☐   Always trust "mail.mac.com"  when connecting to "mail.me.com"
    {then there is a box enclosure}
    ☐     {this one is bwown}   Verification Class 3 Public Primary Certification Authority - G5
    {below, indented}    {an arrow like this one  ↵  pointing to the right to this bluish box,}  ☐     VeriSign Class 3 Extended Validation SSL SGC CA
    {then a larger bluish box:     "Mail.mac.com"
    Issued  by: VeriSign Class 3 Extended Validation SSLSGC CA Expires:  Friday, April 18, 2014.
    {then  a red circle with an X inside, statement in red}   This certificate is not valid (host name mismatch)
         Trust
         Details
    {my choices}     Hide Certificate          Cancel     Connect {in blue}
    --------------------------------end of warning--------
    Thank you in advance.    What should I do?   Is anyone else getting this?   The emails still coming in are directed to my email address.
    Tom

    I have iCloud eMail running in 10.4.11 & 10.5.8...
    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • Mail preferences question

    question... my ex wife has somehow accessed my email acct. on my daughters macbook. I did some spec work for playboy mag and she is claiming that i did it on my daughters mac.She claims that when the mail application is launched my emails all appear. She claims she cannot delete my emails because she needs an administrator to do so, which she claims I am. I believe that in mail preferences it is easy to delete an account without the use of an admins password. Is that correct. I believe that she is using 10.5

    Though this really is the Mail section of Tiger Discussions, isn't there a separate section in your Mail Preferences (up in that menu bar where you found "General") labelled "Accounts"?
    In Tiger Mail>Preferences, there are several menus in Prefs...General/Accounts/Junk/Fonts...etc.
    Are you saying that "Accounts" is not a menu choice in your Panther's prefs?

  • Mail folder question

    When Mail was corrupted, I saved the library mail folder to desktop before deleting the prefs.
    I've successfully reimported that Mail folder contents back into mail.
    The question: Is it now OK to delete the mail folder from desktop?

    The question: Is it now OK to delete the mail folder from desktop?
    Yes.
    (32386)

  • Mail Form Question

    Hi Folks,
    I'm VERY new to Dreamweaver, have just created a Mail Form in
    PHP and have absolutely no idea what to do with it now. It's one of
    those typical forms with To:/Email:/Message: I know this is a
    painfully basic question but I can't seem to find the answer in
    books, training videos, my hosting provider, etc. I know I need a
    URL to "point" the file to on the server but my internet host had
    no idea what I was talking about.
    If anyone could help it would be greatly appreciated!!
    Thanks, Cynthia

    you can use php on this hosting?
    I'd suggest using the phpformmail script.
    here's my stock cut 'n paste on what to set to what, and why
    1)go to
    http://boaddrink.com
    -->phpformmail
    download it.
    extract the ZIP file.
    More detailed instructions are in the docs folder
    2) open formmail.php in dreamweaver
    Make the following changes (in code view, turn line numbers
    on)
    2a)
    line 4,
    define('CHECK_REFERER', true);
    change to:
    define('CHECK_REFERER', false);
    reason: too many people use a firewall or Norton security to
    restrict this.
    2b)
    Line 43
    $referers = array('www.example.com', 'example.com');
    change to the domain name of your web site.
    reason: this probably isn't needed since we just turned the
    referrer
    checking off. but change it anyway.
    2c)  *this is to hard-code the recipient address into
    the php
    file, where it is totally invisible *
    Line 46
    $recipient_array = array();
    change to:
    $recipient_array = array('me' =>
    '[email protected]');
    **of course, replace [email protected]  with
    the email address
    you want to receive the form data. Also note the single quote
    marks.
    reason: this sets the email address the form results will be
    sent to.
    You can also make a list of possible recipient alias values-
    see the readme
    in the docs folder.
    2d) give the script a default "From" address to use.
    Go to line 41
    Change:
    define('FROM', null);
    to:
    define('FROM', 'Example Name <[email protected]>');
    substituting your name and email address.
    3) now do a File-->Save As and save this file to within
    this Local Site
    folder. save it as anythingyouwant.php
    4) in dw's File Panel, find anythingyouwant.php and upload it
    to the remote
    site.
    5) Now open your form html file in dreamweaver,
    5a)click the mouse into the form area, and select the
    <form> tag on the
    lower left margin of the design window.
    In the Property Inspector, it should now show the properties
    of the <form>
    tag. In the Property Inspector, to the right of the ACTION
    line, click the
    folder icon and browse to and select the anythingyouwant.php
    file
    you've saved to within this site.
    5b) now click within the form area and go to dw
    menu-->Insert-->Form
    Objects-->Hidden Field
    This inserts a hidden form field.
    In the property inspector, change the NAME/ID of this field
    to: recipient
    And the VALUE of this field to: me
    the code should look like:
    <input name="recipient" type="hidden" id="recipient"
    value="me">
    This tells the script to use the "me" recipient_alias value
    as the email
    address to send the form to.
    5c: Do you have a form field to collect the user's email
    address?
    If yes, if this field is named exactly "email" then the
    script will use the
    user's email as the reply to in the outgoing email
    6) Save and upload the form page.
    Try the form from the website.
    Optional:
    1-make a new page for a thank you for submitting message.
    In the form, insert another hidden field.
    Name: redirect
    Value:  the full absolute
    http:// address to the new thank you page.
    If you don't set a redirect value- the form script will build
    a "thank you,
    here is what you submitted" page. If you want to use that
    dynamic page-
    upload the .css file that it uses.
    2- If you have a field in the form to collect the visitor's
    email address,
    IF you name this field  in the form exactly  
     email   then the visitor's
    email address will be the Reply To address in the outgoing
    email.
    There are 30 or so other optional form fields to control the
    form- see the
    readme in the docs folder. One of those optional control
    fields is
    verification.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Mail Rules Question

    I have a lot of email on my Gmail account. A semi significant portion of them are status updates, such as Facebook, Pownce, Netflix, and other site updates. In the past when I used POP, it wasn't such a big deal to keep these emails because Gmail offers something like 4GB of space. However, now that I am switching to IMAP, it's taken me forever sync with all 14,000 emails on the Gmail server.
    I don't want to have to do that again, especially not on my iPhone.
    My question is this: Is it theoretically possible to setup a mail rule to have a specific folder delete all its contents after a specified amount of time? Looking in the default mail rule options, there is the ability to delete email as it comes in, but not necessarily after, say, 30 days. I'm looking for something along the lines of, "every 30 days, delete everything in this mail folder."
    Any ideas?

    David Gimeno Gost wrote:
    Mail doesn’t provide that functionality, but you may set up a smart mailbox that displays the messages to be deleted, then manually delete whatever shows up there every once in a while.
    Yeah, that's what I figured.
    Another option is writing an AppleScript and selecting the "Run AppleScript" rule option, but I'm a) not 100% it's even possible, and b) rusty on AppleScript.

Maybe you are looking for

  • Purchase Register Report

    Hi Friends,          I need to develop the Purchase Register Report with Vendor details, TIN number, Invoice details, E1 purchases with purchase base value and VAT and CST percentages. But Iam new to the Purchase module. I know the basic tables for p

  • Test Stand 3.5 install problem

    I'm having problems installing Test Stand 3.5 Development Edition on a WinXP SP1 machine - would anyone have any suggestions. I'm performing a custom install and selecting all components other than "Device Drivers". The install fails on "NI TestStand

  • How to call ejb from Forms?

    Hi. I have an existing form (version 11.1.2.0.0) and an existing ejb. Both are running on a WebLogic server version 10.3.5.0. I want to call the ejb from the form (I know that this is not recommended, but in this case it is the only sensible solution

  • Components not showing up in Flash CS5

    What's the correct way to install components in Flash CS3? first I tried to install the NewGrounds Ad component for AS 3.0 which delivers as an .xmp file. I doubleclicked it and in the Extension Manager it's listed as active under Flash CS5. I restar

  • MySQL for MacBook Pro?

    Hi there, first time Mac owner and recent lurker here. I'm sorry if this has already been addressed, but I've looked in several places and am still unsure of which version of MySQL to install on the new MacBook Pro. I understand there is a universal