Mail rules work for some users, don't work for others

Ready to pull my hair out over this one:
Leopard to Snow Leopard upgrade went uneventfully, except for the fact that server-side mail rules (accessed via browser at FQDN -> Mail Rules) work for several users (two, to be exact) and don't for the rest (about 15 or so).
The usual culprits have been reviewed: 'Enable Server-Side Mail Rules' is checked in Mail -> Settings -> Filters, 'Allow users to configure server-side mail rules' is checked in Web -> Sites -> Web Services, users can create vacation notices and email rules without issue via browser, permissions look fine on the contents of /Library/Email Rules and /var/spool/imap/dovecot/sieve-scripts, logs give no indication of any foul play (at least the Email Rules -> debug.log generates the same entries for both functional and non-functional users), etc.
I have noticed that /var/spool/imap/dovecot/sieve-scripts contains only two items, which - you guessed it - line up with the GUIDs of the two functional users. Theoretically every user with a rule should be represented here.
As suggested in this thread:
http://discussions.apple.com/thread.jspa?messageID=11171395&#11171395
I created both a vacation notice and an email rule for several users, thinking that may force the folder creation for those users, but no dice. I even manually created folders for a few users with their GUIDs as the folder names and assigned each user ownership and read/write access. Still nothing. Created a few new test user accounts just to rule out any legacy account weirdness (although it's worth noting that I completely redid the OD and recreated user accounts after the upgrade) and replicated the problem with these, as well. Lastly, used Inspector to compare OD attributes between functional and non-functional accounts, with no glaring differences.
Help!

Did you find an answer? I encounter the same problem on my new MiniServer. Deleted and created all users several times, but just for some accounts mail is working.
Do you have the answer?
(new to this site, read a lot already, but not found)

Similar Messages

Sharepoint Foundation - search working for some users (or computers), but not others

Hi all,
We have doozy of a search problem with SharePoint Foundation 2010 that I'm hoping someone can help with.
We have an application that is listening on port 14197 and search is working just fine, but only for one or two users.
If I do a search while logged in using the account we set the application up with then the search works fine and it returns records as expected.
If I use a different account - one that has full control over the app, then the exact same search fails with the following message:
We did not find any results for 06BSL.
Suggestions:
Ensure words are spelled correctly.
Try using synonyms or related searches.
Try broadening your search by searching from a different site.
Additional resources:
Get additional search tips by visiting Search Help
If you cannot find a page that you know exists, contact your administrator.
We've done everything we can think of, including several procedures to create new search accounts, replace databases, etc.
Nothing has helped and all of the info we can find online is in relation to getting search working when it doesn't work at all. In our case it is working, but only for some users. We thought it might have been a permissions issue, but not matter
what permissions we seem to give to test accounts they still don't work. We've set up a test account, for example, that is a member of the 'application owners' group, but cannot produce any search results with it.
The SharePoint Foundation server is running on Windows 2008 Server Foundation, with a separate SBS 2003 DC.
Any help most appreciated.

Hi Alex, thanks for your response and apologies about the late reply - didn't realise someone had responded until now!
Agreed that this looks like a permissions issue, but we're stumped as to what it could be. The 'test' account displays this problem - if we try and search on 06BSL
we get no results, but it does appear that this account has full control over this document (see below).
Note that the 'Manage Permissions' page presents a comment 'This list item inherits permissions from its parent. (Customer QA & Product Management)' which is what we're
expecting.
The indexing schedule is set to 5 minutes.
Appreciate your help with this, as we've spent a huge amount of time on this problem but don't seem to be any closer to a resolution.
Cheers,
Damian
Check permissions result (this result is the same for the list or for the document itself):
Permission levels given to test (DOMAIN\test)
Full Control
Given through the "QA Application Owners" group.
Design, Contribute, Read
Given through the "QA Application Members" group.

Jabber voice mail for some users.

Dears,
J4W voicemail works perfect with default config.xml file for some of the users and for some of the users it shows the attached when clicked on voicemail tab. I have create 2 no's of sevice profile, the voice mail credential set for both service profile is Unified CM IM and presence.
I can understand the prompt as it is asking for voicemail password for that reason i have to create a custom config.xml file and i have to upload in TFTP server, But my concern is why it is working for some of the users without config.xml file and for some users it is prompting for username and password.
Thanks

Dears,
the profile are different, but if i put the the other users working profile also it is not working.
The voice mail server is showing not connected in jabber,
Any hints.
Thanks

Outlook Anywhere not working for some users

Hi All,
I am having a strange issue today with a customer -
Outlook Anywhere has been enabled on their Exchange 2010 environment, but it doesn't work for some users.
Using the ExRCA I have been able to identify the following error on the users who are unable to connect:
"Testing the MAPI Mail Store endpoint on the Exchange server."
"Attempting to log on to the mailbox"
Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
EMSMDB Status: ecLoginPerm 1010
Elapsed Time: 225 ms.
On users that are able to connect it goes through the ExRCA without any issues.
Any help would be much appreciated.
Cheers,
Jack
Testing the MAPI Mail Store endpoint on the Exchange server.
An error occurred while testing the Mail Store.
Additional Details
Elapsed Time: 333 ms.
Test Steps
Attempting to ping the MAPI Mail Store endpoint with identity: outlook.mg.com:6001.
The endpoint was pinged successfully.
Additional Details
Attempting to log on to the Mailbox.
An error occurred while logging on to the Mailbox.
Additional Details
Mailbox logon returned ecLoginPerm 1010. You don't have the correct permissions to log in to the mailbox.
EMSMDB Status: ecLoginPerm 1010
Elapsed Time: 225 ms.

Hi,
I notice that this issue only impact "some users".
I suggest double confirm whether the Outlook Anywhere configuration set correctly on Outlook client. Pic as blow:
Thanks
Mavis Huang
TechNet Community Support

MAM application is not working for some users

Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.

Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova

Increasing Email Size Limits for some users

Hi All,
For some users (management) i needed to arrange that they are able to send bigger files then the default 10MB limit to each other.
I used this procedure to do so,
https://www.simple-talk.com/sysadmin/exchange/increasing-email-size-limits-for-your-high-profile-users-in-exchange-2010/
In a nutshell:
Set Global Transport Org. Config to 200MB
Set Transport Send and Receive connector to 200MB
Created a Distribution group adding the MT members and me (for testing)
Created a transport Rule for the 10MB limit for all users and exception for the distribution group
(Believe me, i am not happy with the 200MB size limit)
All seems to work but i have one issue that i cannot tackel or maybe it is by design.
-Managemant can also send big files to all
users who do not have this privelige, this is not someting i want, sending 100MB+ attachments to over 150 users.
Is this by design or do i mis something?
Thanks,
Ron

Hi RonGielgens,
Attachment size in exchange has to be set on
Global settings
Connectors (send and receive connectors)
Mailbox
The global settings will affect all the others. of course connectors will affect specific servers and mailbox one user. You have to set the global to the absolute max size you want to allow in your organization.
after you do this you will need either to set the 10MB on each mailbox
Get-Mailbox | Set-Mailbox -MaxSendSize 10MB -MaxReceiveSize 10MB
Then change the limit on specific mailbox
or another way is to create a transport rule that will reject the email if the attachment size it > 10MB unless the sender/recipient is the required user or group.
so basically create 2 transport rules
1. reject messages sent to anyone with attachment > 10mb unless the recipient is userX
2. reject messages sent from anyone with attachment > 10mb unless the sender is userX
Normal case it should not allow.
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

OBIEE access denied for some users only

Hi All,
we are using OBIEE 10.1.3.4 version on windows envorinment .The users can access the OBIEE reports using 'PORTALPATH' session varible in RPD.For some of the users are got "access denied" while they are accessing for thir particular dashboard.Eariler these user got access this dashboard with out any errors.We dnt changed in our system anything from last three months.
We have no idea why we are getting these error for particular users only.Its Prod issue we need to reslove these error ASAP.
we are getting these error"acess denied for user to path/shared/shared/_test/testdashboard
Error Codes:09XNZMXB"
but last one year its working without any issues .From our side we dnt did any changes in production like RPD level,Catalog level and config file changes , we have no idea why suddenly we are getting these kind of error for some users only not for all users.
Could u please advice me how to reslove this PROD issueASAP.
Thanks,

Well its Prod (you have a dashboard called testdashboard in Prod?) anyway - someone might have changed the presentation catalogue permissions on the dashboard. All it takes is for someone to remove 'Everyone' or change a Group permission and it could effect.
If they changed the Parent folder and cascaded the changes down this might cause this issue.
You have a folder called 'Shared' - check the groups that the people are in have 'Traverse' , 'Read' or higher. Also chek dashboard permissions themselves from Settings-Manage Interactive Dashboards - Check the Padlock icon.
Are you users getting allocated into the correct WEBGROUPS ? Is this assisngment done explicitly in the webcat or via an RPD Variable ? Have you checked NQQueryl.log to make sure any init blocks are completing successfully?
Either persmissions have changed or group memebership is not completing.
Good luck
Alastair

Login Issues for some users

Hey Folks,
I am running SMC 3.5X and am experiencing problems with some users not being able to login.
I can login as root and some other users, but some new users have the following issues.
1) Using the java console on solaris and windows appears to just timeout. I can see images getting loaded in the server.log file but then I get the message "The Sun Management Center is bing initialized. Retry?".
2) Using the web console I get the message "Error Getting domain Info"
In both cases is I appear to be able to login but can't access the data.
Thanks

Hi Spribyl,
1) Using the java console on solaris and windows
appears to just timeout. I can see images getting
loaded in the server.log file but then I get the
message "The Sun Management Center is bing
initialized. Retry?".
2) Using the web console I get the message "Error
Getting domain Info"So, using the exact same Console on the exact same system... some users can get in and some can't, right?
I don't know what causes this, but I've seen it before as well. I think in my case it may have been because those users tried the SunMC web interface before the Java interface. If you login to the Java Console, the first time a new user connects it asks them what they want their default Domain to be. If you try to login to the web interface before you've set your Domain in the Java Console it seems to mess up SunMC internally to where you can never set your home domain properly. So you'll never be able to login to anywhere with that account.
I re-ran "es-setup -F" on my SunMC Server, and told it not to save the old info that was in the database. That's going to erase any old alarms you had, but in my case once I did that, and made sure all new users logged into the Java Console at least once before using the web page (to set their domain)... everything worked fine.
I don't know for sure what the problem was, but I've seen the same types of errors you did, twice, and both time those steps fixed it.
Regards,
[email protected]
http://www.HalcyonInc.com
>
In both cases is I appear to be able to login but
can't access the data.
Thanks

Services for object box not visible for some users

Dear All,
PM module experts please help. In equipment master transaction IE02 in left hand top corner we get box for SERVICES FOR OBJECT which is useful for attaching external documents like word and excel. but problem is it is not visible for some users. Our security/authorisation team has also done some check but didn't get any solution.
anybody knows the reason why there is no box availabe?
Thanks
SR

Dear Siddhartho Raha
I think this problem related ABAP work,this problem very general problem,first refer any note availble or search throgh any class in SE24
note are like this way 492331,this is not related to your query but same like it is and also may be
Due to an error in the coding, it was possible to link a Word document to a Document in IE01. Because the data cannot be saved in transaction IE01, the linked document is lost after leaving the transaction.
Hope this may helps you
Prem.

Team view data not getting refers for some user

Hi,
We are facing an issue in team view app for mss, manager's are seeing details of employees not belonging to their Org Unit/ data not getting refreshed. This seems to be the Cache related issue where the data of perviously logged in user is displayed to the current user till browser cache are cleared manually.
User don't have permission to clear browser cache. Is there any work around.The issue is coming only for some users.I have enable the 'ABAP HTTP Security session Enabled' property of the system used.
Regards
Pallavi

Hi Karthik,
in the first view I execute the BAPI and in the second view I show the results. In the second view I also submit the modified data via another BAPI.
As I execute and display result of same BAPI in two different views I have bound the same model node to both of these views. Let me give you some sample code for understanding what have I done.
In the first BAPI's search action handler I have written:
          Zsr_Packnr_Validate_Components_Input input = new Zsr_Packnr_Validate_Components_Input();
          wdContext.nodeZsr_Packnr_Validate_Components_Input().bind(input);
          input.addT_Version(new Zsr_Packnr_Field_Values());
          input.addT_Zsr_Genbr(new Zsr_Packnr_Field_Values());
input.setZsr_Gmc(globalMaterialCode);
          input.setZsr_Mrc(mrc);
          input.setZsr_Ctry(country);
          input.setZsr_Dc(distributionChannel);
          input.setZsr_Div(commercialSegment);
wdContext.nodeOutput_Validate().invalidate(); //as u suggested
          wdContext.currentZsr_Packnr_Validate_Components_InputElement().modelObject().execute();
          wdContext.nodeOutput_Validate().invalidate();
In the second BAPI I just display the output node from the same Model context node (its mapped to the second view too).
But as I said whenever I update some values in the result set and submit it the data gets submitted properly. But when I press the search button again, the previous set of data gets populated, not the just updated data.
If anybody has some idea on why the second time search BAPI execution still shows the previous set of result it will be a great help to me.
Thanks for all your help.
Shubhadip

Some links don't work in Safari

I ran a whole bunch of software updates a while ago (funny, after the entire process, nothing actually updated... I had to run it again later), and somehow, in the process, something went wrong with Safari. Now, some links don't work. It's mostly links in the content portions of webpages. For example, things like the Store/Mac/etc buttons at the top of the Apple site work fine, but things like links in forum signatures don't. I have to open them in a new tab. I tried updating Safari, but it didn't fix anything. I've tested Firefox and Camino and they work fine, but Safari is my browser of choice, so this is pretty irritating. Any ideas as to what's causing this and how to fix it?

You might try installing a fresh version of SafariStand and see if you still have the problem with dead links. I'm not familiar with the 'Quick Search' feature but you could have a look at Glims. Don't try to run both Glims and SafariStand together.

Adobe Premiere Pro CC launches for some users, but crashes for others.

I am troubleshooting an issue in a college computer lab. Adobe Premiere Pro CC launches perfectly for some users, but crashes for others. All computers are joined to a domain. The program launches successfully under faculty and admin accounts. It launches under my student account and will launch for some students in the class. There are, however, some students who cannot get the program to launch. Each time it fails when attempting to load ImporterQuickTime.prm.
For these students, the following error appears:
Adobe Premiere Pro CC has stopped working
Check Online for a solution and close the program (Tried this nothing seems to come of it)
Close the program
I clicked View problem details
Problem Event Name: APPCRASH
Application Name: Adobe Premiere Pro.exe
Application Version: 7.2.2.33
Application Timestamp: 532c3999
Fault Module Name: dvaui.dll
Fault Module Version: 7.2.2.33
Fault Module Timestamp: 532bed86
Exception Code: c0000005
Exception Offset: 00000000002d31c1
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 3272
Additional Information 2: 32722596c6b4441ac0840ed9743cbfbb
Additional Information 3: 3e22
Additional Information 4: 3e2260f0a53760c20f23c7e2675c1736
I did check Quicktime and it is not updated to the most recent version. However, if it was a result of Quicktime not being up to date, why can some accounts launch the program while others cannot. I have also updated the graphics driver on one computer. No change. I compared my student Active Directory account to that of one student who could not launch the program. They are in exactly the same place in AD and therefore have the same permissions on the domain. This is a puzzling issue and the instructor is getting frustrated. Any help or suggestions with this matter would be greatly appreciated.
-Barb

I have no idea, other than what I said about the program's design requirement for an Admin account and "sometimes" problems on any other account
About the only thing I can suggest is a "remote control" chat session... when a student with a non-working account is having problems
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

I have an ancient laptop (from 2005) that has my entire music library. This laptop barely works and some keys don't type anymore. How can I get all this music transferred to another computer, or available to me on the cloud?

I have an ancient laptop (from 2005) that has my entire music library. This laptop barely works and some keys don't type anymore. How can I get all this music transferred to another computer, or available to me on the cloud?

No... do not move programs.
About the iTunes library files
Your iTunes library files track the media you add to iTunes, how you've organized it, and other information such as playlists. By default, these two files are in your iTunes folder:
Mac OS X: /Users/username/Music/iTunes/
Windows XP: C:\Documents and Settings\username\My Documents\My Music\iTunes\
Windows Vista: C:\Users\username\Music\iTunes\
Windows 7: C:\Users\username\My Music\iTunes\
Windows 8: C:\Users\username\My Music\iTunes\

Restrict the posting period opening and closing for some users

Dear SAP gurus,
I want to restrict some users to open the posting period and for some users close posting periods. I knew that these can be done through authorization group. Pls explain how to create authorization groups and how to use those? Anybody can help me out?
Regards,
Venkata Reddy

Dear Venkatareddy,
There are two sets of period in OB52. The first set of "From" and "To" is for the authorised group and second set is for the non authorised group. In the "Authorisation Group" (last column) give some 4 charecters name. Say "FICO".
Now ask the basis to attach the object "FICO" for the users who are authorised say user1, user 2 and user3.
Now in the first set of period you can maintain say 1 2008 to 16 2008 and in the second set 1 2008 to 1 2008.
So except user1,2 and 3, all the others can post only in 1 2008. Whereas users 1,2 and3 can post in all the periods of 2008.
Assign points if useful
regards
Venkatesh

How to Block Account member in input reporting for some users?

Hi experts, i need to know if is possible to block input of values for some Users in the Account Dimension so that some users can input value in the report but other user cant do it.
I try to do this from "member access profile" but this option only allow you to define access right for one specifict parent o member.
I mean, is posible to asigned to Account Dimension a Propertie type "OWNER" like ENTITY?
For example: one user must to input value for the Account member "CASH", but other user dont, however i have to show the same input reporting for both users.
I hope understand the question, im sorry about my english
thank you in advance
Ignacio Vazquez

I would think you could do one of the following:
Either set account as a secured dimension. You would then define security profiles for all account groups and assign those to your users / teams as appropriate. Would take a while to setup initially, but if your users don't change that much it shouldn't be too difficult to manage once it's done.
Setup different input templates that only showed the accounts you wanted each group of users to see. Put the templates in different site folders and assign access to those sites as required. users would then only have access to open the template applicable to them. Would require that you basically make duplicate copies or your current template, modify and save to different site folders which could become a pain if the template requires changes (since you would now have to make the same change multiple times).
Setup a macro in the current template so that you need to enter a password to unlock the send commands for the respective accounts. I don't know if it can be setup to support multiple passwords - assuming it can, password 1 would unlock all accounts, password 2 would only unlock CASH accounts, password 3 would only unlock LIABILITY accounts, etc. You then distribute the passwords to the users as appropriate.
Hope that helps.

Mail rules work for some users, don't work for others

Similar Messages

Maybe you are looking for