Mail says can't get more mail user folder full.

i have been getting this message often and had found a suggestion on removing an envelope in the mail folder which I did and it seemed to have solved the problem for a couple of weeks. I can easily get 600 emails a days, different mac email groups that I subscribe to and there are time I don't get to my mail for 3 or four days and never get the message. I logged on this morning and there was the message that I had to much mail and needed to remove mail or make space in my user folder. I closed down mail came back up went off line and I only had 115 emails in my primary account and 28 emails in my hotmail account. I checked he three trashes and had 471 total item in all trash folders.
What is going on.. how do I fix this. Are other people experiencing this same problem? It seems to have come about around 10.4.6 and the security update about that time.
Leon
Mac Mini 1.42 8X DVD+-RW Dual Layer 24X CD-RW 250 Gig Ministack Version 2   Mac OS X (10.4.6)   Apple Bluetooth keyboard 19" Nec VGA CRT Flat Screen 1 Gig Memory iSight

Did you upgrade to Tiger from Jaguar or Panther?
A couple of years ago I received a batch of emails that I had
already received, and read, about 18-24 months earlier. Where were
they all that time? Why did Earthlink send them to me again after that
long delay?
I don't believe Earthlink sent these again since any messages available on the server are downloaded from the server by an email client such as the Mail.app.
What is your setting in Mail for removing messages from the server when downloaded which is available at Mail > Preferences > Accounts under the Advanced tab for the account preferences?
I don't believe this is an issue with what occurred here. More than likely, this was caused by corruption to the account's Inbox mailbox and these messages already downloaded from the server and removed from the server when downloaded reappeared in the account's Inbox mailbox only as new unread messages which were not properly or completely deleted (if these messages were previously deleted from the account's Inbox mailbox) or not properly or completely removed if some or all of these messages were transferred to a user created "On My Mac" location mailbox.
How often do you use the Rebuild Mailbox function on the most active mailboxes such as the account's Inbox and Sent mailbox?

Similar Messages

  • How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

    How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

    How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

  • After down loading the latest up dates, I am now getting a pop up that says can't get e mail server stopped working, how can I stop this pop u.

    After the latest ISO 8.3 down  load to my, I now keep getting a pop up saying can't gette mail server stopped working, I am still receiving e mail so I know it working, it's just annoying having to cancel this pop up, any ideas how to stop this pop up.

    Pull your mail plist from ~/Library/Preferences

  • Message says: "can not get mail, the connection to the server failed" . Now I'm confused because all the mail shows up perfectly.

    I just upgraded to the 5s. I have several mail accounts and I'm getting a message that says: "can not get mail, the connection to the server failed" . Now I'm confused because all the mail shows up perfectly.

    Well it does it every time I go to mail and is driving me nuts. It never happened on my iPhone5, just on this 5s.

  • HT4528 I need help!! My email keeps saying "Can't get mail" & "Can't connect to server". How to fix this?

    I have an iPhone 5 with IOS 7 software. MY email keeps saying "Can't get mail" & "Can't connect to server"

    Hi PAG1,
    Thanks for using Apple Support Communities.  I would recommend restarting your iPad and trying again to see if that helps:
    iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    Cheers,
    - Ari

  • Where can I get more information about User exits?

    Where can I get more information about user exits,their related Tables and the source code of an User exit?
    Thanks

    would you please give the Internet addresses of these places?
    Mostly I want to get the source of some user exits in Oracle Application.
    If you know how and where can I get these sources,I'll appriciate if you let me know.
    Regards

  • HT201210 it's saying that my start up disk is full - so I can not update my phone. How can I get more room on my disk?

    it's saying that my start up disk is full - so I can not update my phone. How can I get more room on my disk?

    it's saying that my start up disk is full - so I can not update my phone. How can I get more room on my disk?

  • How can i get more local storage space on my iphone 4

    I want to put more song on my iphone 4 but it keeps saying i dont have enough local staorage space. How can i get more local storage space on my iphone 4?

    You don't. Delete 'stuff' you don't need or buy a phone with more storage. you can not increase or upgrade the internal storage in the iPhone.

  • HT6006 Hello, I have a charge on my Discover card for $116.86 and I do not know what it is for.  Can I get more information on it please.  The info in the statement is MHDBQJ1Z3G-0

    Hello, I have a charge on my Discover card for $116.86 and I do not know what it is for.  Can I get more information on it please.  The info in the statement is MHDBQJ1Z3G-0

    Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
    If it's a charge though your iTunes Store account, it should be reflected in your Purchase History:
    http://support.apple.com/kb/HT4098
    If the charges are not reflected in the Purchase History, then it's most likely a fraudulent charge to your credit card directly or your credit card number has been stolen and used by someone else in another iTunes Store account rather than an unauthorized purchase through your account. In either case it will be up to your bank to handle.
    Regards.

  • How can I get more than one firewre port ?

    Hello,
    how can I get more than one firewire port ? I'd like to be able to connect my canon HV30 camera as well as my firewire external HD at the same time so I can use firewire to upload the videos I've taken. Is this possible?
    TIA

    Hi ginestre-
    Many FireWire hard drives have 2 firewire ports so that you can daisy-chain devices and connect the camera that way.
    Daisy-chaining is not the most reliable method, but it works, so you could buy a FireWire hub.
    Luck-
    -DP

  • I am running a strain gage test and can't get more than 1000 samples

    A formor employee left a strain gage VI that I am attempting to reuse but no matter what I do I can,t get more than 1000 samples before needing to restart the loop. In the task timing (of NI-DAQmx) I have set the acquisition mode to N Samples and the clock settings to read 65000 samples at 25 Hz. There is a DAQmx timing(sample clock) VI that resets to finite samples and 1000 per channel when I close it but I have reset it to 65500 continious samples and left it open to no avail. There is a rate input to this sample clock on the front window that I have tried setting to several different rates to no avail. The Vi will run about 15 seconds, collect 1000 samples and then ask to verify the file location to save the data to. Upon verifying the file location the VI will run another 15 sec. loop before stopping for verification again.
    If the loop is stopped rather thanhaving the file verified an error is listed:
    Error-200278 occurred at DAQmx Read (Analog 1d WFm NChan NSamp).vi:1
    The given possible reason given is: attempted to read a sample beyond the final sample acquired.
    When I stop attempting to run the VI the block diagram opens with a dark block around file creation block. I need this VI to run for 10 min. collecting samples at about 25/sec. Can someone help me figure out what I am doing wrong?
    I have made screen shots of the VI and the error code to assist finding the incorrect programing.
    Thank you for your help.
    Jim Steinmeyer
    Jim Steinmeyer
    Design Engineer
    Reinke Mfg.
    PO 566
    Deshler NE 68340
    [email protected]
    Attachments:
    strain test error.doc ‏493 KB

    Thank you,
    I was just thinking about being able to increse the size of the doc.  for better visability. I have tried working with the rate input for the DaQmx for the sample clock and it does change the frequency of sampling, but I still get just the 1000 samples. I have included Jpegs this time. I have tried to exppand the two DAQ assistants that arn't expanded but am unable to, I also am unable to find a "propertys" command to open them up and see what exactly they do. The nested while loop for output also seems strange to me. Maybe I would be better to attempt a new program but being new to the language I thought using an existing program might be best.
    Jim
    Jim Steinmeyer
    Design Engineer
    Reinke Mfg.
    PO 566
    Deshler NE 68340
    [email protected]
    Attachments:
    block diagram.JPG ‏134 KB
    DAQmx.JPG ‏129 KB

  • How can i get all the users from weblogic server?

    how can i get all the users from weblogic server?
    i have configurated a LDAP server using iPlanet and
    in weblogic server console i see those users from LDAP
    server. but how can i get all the users in my program
    from weblogic server instead of LDAP server?
    BTW,how to configure a RDBMSAuthenticator and what should i do
    in Oracle? which tables should i create? and how are their architectures?
    Thanks
    Daniel

    BTW, i use weblogic platform 8.1
    "Daniel" <[email protected]> дÈëÓʼþ
    news:[email protected]..
    how can i get all the users from weblogic server?
    i have configurated a LDAP server using iPlanet and
    in weblogic server console i see those users from LDAP
    server. but how can i get all the users in my program
    from weblogic server instead of LDAP server?
    BTW,how to configure a RDBMSAuthenticator and what should i do
    in Oracle? which tables should i create? and how are their architectures?
    Thanks
    Daniel

  • I bought my 20" iMac in Nov of 2007 and when I try to purchase the upgrade for lion I'm told I need 2GB of memory and I only have 1GB.  How can I get more?  I am currently running snow leopard

    Trying to upgrade to Lion on my 20" iMac that I bought in Nov. 2007.  Currently I'm running on MAC OS X version 10.6.8.  When I tried to buy the upgrade I got a response that Lion requires 2 GB of memory and I only have 1 GB.  How can I get more memory and will my computer be compatible with Lion when I do get more memory?

    Yes you can install more RAM. Up to 6 GBs. Two - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMMs. For the maximum use one 4 GB and one 2 GB. Otherwise install a pair of 2 GB modules for a total of 4 GBs.
    You can purchase suitable RAM at DataMem or OWC. OWC also has video tutorials on installation.

  • Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive.

    Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive. (The problem is that Safari could not download the file "iTunesSetup.exe" because there is not enough free disk space.Try deleting documents or downloading to another drive) ... Perhaps this is the main problem why can not open iTunes and inscription is: the folder "iTunes" can not be found or created, and is required. The default location for this folder is inside the "Music" folder. - And after options ok, appears option: Choose iTunes Library with inscription iTunes needs a library to continue. You may choose an existing iTunes library or create a new one - but still following options Choose Library and the following options can not open iTunes ... Please for instructions on how to eliminate the problem or eror ...
    Mac is running OS X v10.6.8, Safari should be 5.1.10. Or  Mac OS X  /  Version  10.6.8  /  Build 10K549 / Serial Number W8****ATM  /  Processor 2.4 GHz Intel Core 2 Duo  /  Memory 4 GB 1067 MHz DDR3 or More Info:
    Hardware Overview:
      Model Name: MacBook Pro
      Model Identifier: MacBookPro7,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2,4 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 3 MB
      Memory: 4 GB
      Bus Speed: 1,07 GHz
      Boot ROM Version: MBP71.0039.B0B
      SMC Version (system): 1.62f7
      Serial Number (system): W80394HFATM
      Hardware UUID: 94647506-C5D0-5D73-BC7F-FC680D238F43
      Sudden Motion Sensor:
      State: Enabled
    <Personsl Information Edited by Host>

    buy an external HD   1TB for $60
    NO notebook is a mass storage device, so dont try to turn it into one, it doesnt work that way.
    Unless youre using it every couple weeks, its static data and should be on an external HD
    In the case of a Macbook Air or Macbook Pro Retina with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace.  You should never be put in the position of considering “deleting things” on your macbook SSD in order to ‘make space’.
    Professionals who create and import very large amounts of data have almost no change in the available space on their computers internal HD because they are constantly archiving data to arrays of external or networked HD.
    Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your macbook has a HD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your computer to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation.

  • How can i get input from user in Workflows

    Hello professionals,
    I'm new to SAP B1 Workflow, i have created some workflows and they all worked fine.
    But, I am wondering, How can i get input from user?. For example, i want to display list of options to choose between them and route the workflow based on the selected option. I don't want to use the exclusive gateway and check for some conditions, i want to get input from user.
    How can i do that?
    Thanks in advance,
    Kareem Naguib

    Hi,
    Please refer SAP help file:
    http://help.sap.com/saphelp_sbo900/helpdata/en/b8/1f9a1197214254b79bcf8f93f9fff9/content.htm?frameset=/en/44/c4c1cd7ca22…
    Thanks & Regards,
    Nagarajan

Maybe you are looking for

  • Acrobat 10 won't start anymore

    Love how you spend thousands to get the latest software from Adobe, and then when you simply need to open a PDF file right before a presentation, the application won't open. Found one discussion that advises to uninstall and the reinstall.  Seriously

  • Macbook pro (10.4.11) and facetime

    I am interested in upgrading my macbook pro  os x10.4.11 to get facetime but I am not sure how to do it. Any ideas?

  • How do I import photos from USB drive to iphoto

    I have recently bought iMac and trying to move photographs from old laptop but can't work out how to get photos into iphoto from either finder where they are saved or from the USB hard drive I used to move them across.

  • Buy button does not work

    when I hit the buy button in iTunes, nothing happens (and I have bought lots of music over the years)

  • SAP B1 Limitations

    Dear All, We plan to implement SAP B1 but need to know it's limitations with respect to item master records. We are a Publishing and Distribution Company presently having over 60000 items which will increase to around 500000 items in future. Secondly