Mailing Error records in file-to-file Sp14

Hi All,
Can anyone suggest me how to send error records to the concerned person when I'm doing File-to-File scenario.
According my understanding I should configure SMTP adapter.but if anyone confirms this and suggest any process would be a great help for me.
Regards,
Venu

Hi Venu,
        Great to know that my answers helped you.
well what i may suggest that this was one of the many solutions but not the only one, if you go through sdn you will see other approaches as using a DOM structure
/people/swaroopa.vishwanath/blog/2005/06/29/generic-approach-for-validating-incoming-flat-file-in-sap-xi--part-ii (part 1 and part 2).This i am sending not to confuse you with many validation approaches but to help you understsnad that it can be done in many ways.
what i would request you to do is:
1. Generally files are validated from 3rd party systems like banking servers , legacy etc. So if your client asks you to validate the incoming file and if the existing landscape does not do any data validation and there is no standard data validation tools within the system lanscape, then one should go for these validations.
2.Upto a certain level you can generlise these validations after that you need to take it as a case to case basis, as how can you generise you source and target.
3.I strongly suggest you to consult your Team members/Architects if this is really required to be validated in SAP XI.
NOW BOTH YOUR QUESTIONS,
<i>Issue for 1.
They have mentioned in a document by using Java Mapping program we can segrigate Valid and Invalid messages, here do we need to write any Function modules ?
</i>
look here the author wants to say that he picks up the file as Record
          |
        Row
so that he picks all files and none is rejected in content conversion because of bad structure.The file after being processed as record-row goes to the module chain of file adapter and the EJB is called(page 8), after being validated it is passed or rejected.So
we need a java module to be written which will do this validations, but ejb was not within the scope of that document. No Its a ejb module and not a Function module.
<i>Issue for 2.
How to handle this bcz if we get an error while processing the records(Idocs) at sap side do we need to handle in XI as a different scenario or direct from ABAP end we send a mail to legacy people</i>
No, i think abap can and should handle this, as they are sending the data, so if an idoc is coming in sap xi it should be validated and send.So you need to take a call on this and discuss with abap consultants, if a validations is needed for the objects send by them.
This is what happened in my last implementaion wherein data from R3 was handled by abap.
Hope i have helped you again and have a great day!
Regards,
Anirban.

Similar Messages

  • How to fix problem "PYLR2000 error playing a file. Try again or contact your Monitoring and Recording administrator"

    Hi,
    I'm using qm 8.5.2 (endpoint recording) most of customer PCs cannot play recording file in application.
    When I launch application and try to play recoding file, it is stuck and show error message "PYLR2000 error playing a file. Try again or contact your Monitoring and Recording administrator." I've install all cilent requirements (validate pc is pass). The error still occur. Even though all requirements are complete .
    So, How to fix this problem.
    Thank in advance
    Namkhao

    Hi bsetexast,
    I'm fix this problem by using Java(TM) version 6.0.200.2 that can be download from UCCX when first run CSD (supervisor desktop). Even other higher java version is valid but this problem still occur. If you install higher version, you should uninstall it first and install this version as well.
    If you cannot find them, I will send you via email.

  • Display errors in a file along with records - IBIP_BATCH_INPUT doesnt do it

    Hi,
    I am using the function module IBIP_BATCH_INPUT(used in program RIIBIP00) in my custom program to upload maintenance plan data(Transaction IP01) using call transaction method.The data gets successfully uploaded.
    However if i send incorrect data, an ALV report gets printed by the above function module that displays the error.
    My requirement is to generate a file that displays each record and the corresponding error along with it.
    Pls note that the error file obtained(Call transaction) has only the error records but not the errors displayed.
    The function moduke returns a internal table of errors as displayed in ALV but how can I relate those errors with the the records in my file?

    Hi Rob,
    The transaction IBIP does the same as the program RIIBIP00.
    My requirement is to customize it.
    The legacy system file I obtain is not in the file format IBIPREC(refered documnetation of RIBIP00).
    I convert it into a the required file format and use the file in the program or transaction IBIP manually and data gets loaded into the system.
    If the file contains errorneos data, then the errors are displayed in a ALV report by the program RIIBIP00 and a a file is generated showing the erroneus record.My requiremnet is to have a audit file of the legacy system format plus a column showing errors.
    How can I map the errors obtained from the fn module IBIP_BATCH_INPUT in program RIIBIP00 with the each record and produce an audit file?

  • File To Mail  - Error in sender CC

    Hi All,
    I am trying out a File to mail scenario following the Blog /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
    I am getting the following error in the File Sender Comm Channel :
    Mail: error occurred: com.sap.aii.af.mp.module.ModuleException caused by: com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint  [null "null"]; nested exception caused by: java.io.IOException: no sender address specified
    I could also see the payload is empty in the Receiver Mail CC
    Now can anybody help getting me the mail ...
    Thanks in advance

    Hi Bhavesh,
    I get a checkered flag in Moni ,
      But the response has only SOAP header and Body with out payload  , I Mail package is checked and base64 is selected ..
        <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Response
      -->
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">Party normalization: sender</Trace>
      <Trace level="1" type="T">Sender scheme external = XIParty</Trace>
      <Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
      <Trace level="1" type="T">Sender party external =</Trace>
      <Trace level="1" type="T">Sender party normalized =</Trace>
      <Trace level="1" type="T">Party normalization: receiver</Trace>
      <Trace level="1" type="T">Receiver scheme external =</Trace>
      <Trace level="1" type="T">Receiver agency external =</Trace>
      <Trace level="1" type="T">Receiver party external =</Trace>
      <Trace level="1" type="T">Receiver party normalized =</Trace>
      <Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
      <Trace level="1" type="T">COMMIT is done by XMB !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="1" type="T">system-ID = XIL</Trace>
      <Trace level="1" type="T">client = 002</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 1DC20B0043D611DBC937000D60D4EDB5</Trace>
      <Trace level="1" type="T">PLNAME = CENTRAL</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Queue name : XBTI0009</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTI0009</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="1" type="T">system-ID = XIL</Trace>
      <Trace level="1" type="T">client = 002</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
    - <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
      <Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">number of receivers: 1</Trace>
      <Trace level="1" type="T">Single-receiver split case</Trace>
      <Trace level="1" type="T">Post-split internal queue name = XBTO3___0001</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Persisting single message for post-split handling</Trace>
      <Trace level="1" type="T" />
      <Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="1" type="T">system-ID = XIL</Trace>
      <Trace level="1" type="T">client = 002</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
    - <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
      <Trace level="1" type="T">Interface Mapping http://sap.com/xi/XI/Mail/30 GK_File2Mail_IM</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
      <Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV" />
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
      <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      </Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Async processing completed OK.</Trace>
      <Trace level="1" type="T">system-ID = XIL</Trace>
      <Trace level="1" type="T">client = 002</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2006-09-14T09:48:05Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>

  • File to Mail error

    Hi,
      I am doing file to mail scenario. I got an error
    "failed to send mail: java.io.IOException: invalid content type for SOAP:
    TEXT/HTML"..
       How to solve.
    regards,
    Ansar.

    Hi Bhavesh,
       I done like that but still it is coming...
    This is the process of Communication channel
    2006-12-29 11:42:46 Success Mail: Receiver adapter entered with qos ExactlyOnce
    2006-12-29 11:42:46 Success Mail: calling the adpter for processing
    2006-12-29 11:42:46 Success Mail: call failed
    2006-12-29 11:42:46 Success Mail: sending a delivery error ack ...
    2006-12-29 11:42:46 Success Mail: sent a delivery error ack
    2006-12-29 11:42:46 Error Mail: error occured: java.io.IOException: invalid content type for SOAP: TEXT/HTML
    2006-12-29 11:42:46 Error Exception caught by adapter framework: Failed to call the endpoint
    2006-12-29 11:42:46 Error Delivery of the message to the application using connection AFW failed, due to: Failed to call the endpoint.
    2006-12-29 11:42:46 Success The message status set to WAIT.
    2006-12-29 11:42:46 Success The asynchronous message was successfully scheduled to be delivered at Fri Dec 29 11:47:46 GMT+05:30 2006.
    regards,
    Ansar.

  • Errors in flat file records? how can i handle them?

    Hi All,
    I am new for BDC. I am uploading customer(XD01) records using BDC caltransaction method.my problem is when i am running the program, some times my program is not updating the records because of my flat file errors. after i correcting the error records and if i run the same program already updated records not processing. my program not running. what i need to do? how can i handle the flat file for reprocessing the error records?
    i have around 50,000 records in my flat file.

    your program accepts a flat file say the structure of it is structure_load and you create another structure similar to structure_load and name it structure_error.
    loop at itab_load.
    call transactions...
    if success..
    commit work and wait X sec.
    else.
    move-corresponding field to structure_error
    append structure_error.
    endif.
    endloop.
    write the file stru_error to PC or app server and make the changes  to the data and use the str_error as input to your code again..

  • Tracking only Error records from Batch file in BPEL process

    Hi,
    I am reading file of 1000 records from file adaptor and debatching into two instance of each 500 records. And using invoke insert operation writing into database.
    The first batch of 500 records processed successfully and written into database custom table.
    The second set of 500 records created warning instance with some error message and nothing is written to database from second set.
    The error is due to some wrong data in one row of second set of 500 records. Due to that single row error, the remaining 499 got rejected and nothing from second set is inserted into database.
    Do we have control on that only one record of second set(500records) and BPEL process should write remaining 499 records to database.
    Please help me on this issue. It would be great help. Thanks inadvance.
    Waiting for your replies.
    Thank you.
    Edited by: PraveenT2 on May 13, 2009 4:27 AM

    Hi james,
    Below is the schema file using for reading file
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
    targetNamespace="http://TargetNamespace.com/readService"
    xmlns:tns="http://TargetNamespace.com/readService"
    elementFormDefault="qualified"
    attributeFormDefault="unqualified" nxsd:encoding="ASCII" nxsd:stream="chars" nxsd:version="NXSD"
    *nxsd:uniqueMessageSeparator="${eol}">*
    <xsd:element name="Root-Element">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="root" minOccurs="1" maxOccurs="unbounded">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="C1" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;">
    </xsd:element>
    <xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;">
    </xsd:element>
    <xsd:element name="C3" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;">
    </xsd:element>
    <xsd:element name="C4" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy="&quot;">
    </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:schema>
    *and in bpel .xml file edited property for rejected file*
    activationAgent
    className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent"
    partnerLink="readService">
    <property name="rejectedMessageHandlers">
    file://C:/Initiatives/Employee/RejectedRecords
    </property>
    </activationAgent>
    The Issue i am facing is when i provide the datafile with all invalid values then process didn't create instance but made entry of all invalid record into directory path specified in bpel.xml while setting rejectMessageHandler property.
    But when i provide mix of valid and invalid records of file, then bpel process created instance with warning status.
    the file i was provided is :
    10,veer,10000,12
    20,james,2000,10
    Veer|name|Test
    Veer|name|Test
    Veer|name|Test
    10,file,10000,12
    20,error,2000,10
    I was expecting 1st,2nd,6th and 7th row should be processes and invalid 3rd,4th and 5th rows should get written into rejectedMessageHandlers folder set at bpel.xml. But instance has created and treated whole invalid rows + 10 as first column for 6th row as pasted below.
    <ns0:eno>Veer|name|Test
    Veer|name|Test
    Veer|name|Test
    10
    </ns0:eno>
    <ns0:ename>file</ns0:ename>
    <ns0:sal>10000</ns0:sal>
    <ns0:dept>12</ns0:dept>
    Nothing has written into rejectedMessageHandlers folder set at bpel.xml.
    Can you please help me on this issue. Thank you very much.
    Edited by: PraveenT2 on May 13, 2009 10:33 PM
    Edited by: PraveenT2 on May 13, 2009 10:34 PM
    Edited by: PraveenT2 on May 13, 2009 10:48 PM

  • Error Records-File-To-Idoc

    Hi all,
    In processing of File-To-Idocs, if we get any error in particular record by the follwoing situations how XI will handle,
    1) Wrong value in record.
    2) Due to strcuture change happend to the particular record
    3) value range is different than expected
    Is the total process stops or the correct record posts and error records will not post in the system.
    Regards,
    venu

    Hi Sravya,
    What my main concern is If I'm using Message Mapping tool for mapping (value mapping/structure mapping)
    Some records are might processed correctly and relavent Idocs are created some are not went fine not created any idocs In this case what happence?(Assuming each record will be an Idoc)
    What I have a plan is error messages anyhow will be shown in RWB, I'll search for relavent table and send those messages to relavent person.
    There might be another ways, but I'm using XI just now, I don't know how to use the Java code which u suggested to read.means where exactly i should insert this code to work on file and generates XML message and will be inout to target.
    Expecting an easy solution for me.
    Regards,
    venu.

  • [SOLVED] Pacman error: failed retrieving file : No address record

    I just installed Arch on a x86 laptop using the cd as the package source. I wanted to do a net install, but when I attempted to (regardless of the mirror) I got many responses from pacman in tty7 of "No address record". This happened despite having a network connection and being able to ping any site from the cli.
    After installing, I am still having the same problem. The laptop is plugged in via ethernet, and I can ping any site I want, but a call to pacman -Syyu just returns numerous errors such as
    error: failed retrieving file 'core.db' from mirror.rit.edu : No address record
    And just as a test, I was getting replies when pinging mirror.rit.edu.
    Last edited by process91 (2011-11-18 18:21:17)

    Try the following steps:
    1 - Set the VirtualBox Networking option to NAT
    2 -  Start the arch machine in the VirtualBox
    3 -  Edit /etc/rc.conf as a dynamic IP:
    HOSTNAME="arch"
    interface=eth0
    address=
    netmask=
    broadcast=
    gateway=
    4 - Run dhcpcd
    5 -  Try to ping a couple of sites, or your router
    If you still can't ping or anything, I suggest you start a new thread specifically about your problem. Include the output from "ipconfig -a". You're not going to get much help from posting in a thread marked "[SOLVED]".
    Last edited by process91 (2012-01-18 07:21:14)

  • How to capture errors records in flat file in BDC

    hi ,
        i would like to know how to capture error records while  uploading a flat file to screen through BDC .
    appreciatable solutions are rewarded.
    thanks,
    shan

    Hi shan,
    write this code, it will solve your problem.
    DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
    DATA : I_MSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
    DATA : BEGIN OF I_ERR OCCURS 0,
              MATNR(18),
              FLAG(1),
              MSG(100),
           END OF I_ERR.
    DATA :V_LINES TYPE I.
    LOOP AT ITAB.
    REFRESH BDCTAB.
    PERFORM SCREEN USING: 'SAPLMGMM' '0060'.
    PERFORM FIELD USING: 'RMMG1-MATNR'  ITAB-MATNR,
                          'RMMG1-MBRSH' ITAB-MBRSH ,
                          'RMMG1-MTART' ITAB-MTART,
                          'BDC_OKCODE' '/00'.
    PERFORM SCREEN USING: 'SAPLMGMM' '0070'.
    PERFORM FIELD USING: 'MSICHTAUSW-KZSEL(01)' 'X' ,
                         'MSICHTAUSW-KZSEL(02)' 'X' ,
                         'MSICHTAUSW-KZSEL(09)' 'X' ,
                         'BDC_OKCODE' '=ENTR'.
    PERFORM SCREEN USING: 'SAPLMGMM' '0080'.
    PERFORM FIELD USING: 'RMMG1-WERKS' ITAB-WERKS,
                         'BDC_OKCODE' '=ENTR'.
    PERFORM SCREEN USING: 'SAPLMGMM' '4004'.
    PERFORM FIELD USING:  'MAKT-MAKTX' ITAB-MAKTX,
                          'MARA-MEINS' 'EA' ,
                          'MARA-MATKL' '001',
                          'BDC_OKCODE' '/00'.
    PERFORM SCREEN USING: 'SAPLMGMM' '4004'.
    PERFORM FIELD USING:  'BDC_OKCODE' '/00'.
    PERFORM SCREEN USING: 'SAPLMGMM' '4000'.
    PERFORM FIELD USING:  'MAKT-MAKTX' ITAB-MAKTX,
                          'MARA-MEINS' 'EA',
                          'MARC-EKGRP' '001',
                          'MARA-MATKL' '001',
                          'BDC_OKCODE' '=BU'.
    CALL TRANSACTION 'MM01' USING BDCTAB
                            MODE 'A'
                            MESSAGES INTO I_MSG.
    FINDING LAST MESSAGE IN THE I_MSG TABLE*****
    DESCRIBE TABLE I_MSG LINES V_LINES.
    ACCORDING TO THE V_LINES NUMBER TABLE WILL BE READ****
    READ TABLE I_MSG INDEX V_LINES.
    CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
       ID              = I_MSG-MSGID
       LANG            = '-D'
       NO              = I_MSG-MSGNR
       V1              = I_MSG-MSGV1
       V2              = I_MSG-MSGV2
       V3              = I_MSG-MSGV3
       V4              = I_MSG-MSGV4
    IMPORTING
       MSG             = I_ERR-MSG
    EXCEPTIONS
       NOT_FOUND       = 1
       OTHERS          = 2
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    IF I_MSG-MSGID EQ 'M3' AND I_MSG-MSGNR EQ '800'.
    I_ERR-FLAG = 'S'.
    ELSE.
    I_ERR-FLAG = 'E'.
    ENDIF.
    I_ERR-MATNR = ITAB-MATNR.
    APPEND I_ERR.
    CLEAR I_ERR.
    ENDLOOP.
    WRITE:/ 'SUCCESS RECORDS' COLOR COL_POSITIVE.
    SKIP.
    WRITE:/ 'MATERIAL' COLOR COL_HEADING, 20 'MESSAGE' COLOR COL_HEADING.
    LOOP AT I_ERR WHERE FLAG EQ 'S'.
    WRITE:/ I_ERR-MATNR, 20 I_ERR-MSG.
    ENDLOOP.
    SKIP 2.
    WRITE:/ 'ERROR RECORDS' COLOR COL_NEGATIVE.
    SKIP.
    WRITE:/ 'MATERIAL' COLOR COL_HEADING, 20 'MESSAGE' COLOR COL_HEADING.
    LOOP AT I_ERR WHERE FLAG EQ 'E'.
    WRITE:/ I_ERR-MATNR, 20 I_ERR-MSG.
    ENDLOOP.
    *&      Form  SCREEN
         SCREEN
    form SCREEN  using P_PROG P_SCREEN.
    BDCTAB-PROGRAM = P_PROG.
    BDCTAB-DYNPRO = P_SCREEN.
    BDCTAB-DYNBEGIN = 'X'.
    APPEND BDCTAB.
    CLEAR  BDCTAB.
    endform.                    " SCREEN
    *&      Form  FIELD
       FIELD
    form FIELD  using  FNAME FVAL .
    BDCTAB-FNAM = FNAME.
    BDCTAB-FVAL = FVAL.
    APPEND BDCTAB.
    CLEAR BDCTAB.
    endform.                    " FIELD
    Thanks,
    Murali

  • Cannot sync pacman; error: failed retrieving file, No address record

    Hello,
    As a heads up, I'm trying not to repost
    I've searched the forums but found nothing, I'll keep looking. I've read the front page news about the mirrorlist and tried using the old mirrorlist file. I've been on #archlinux on IRC. Nothing yet.
    Here is an example of what I see:
    [email protected] pacman.d # pacman -Sy
    :: Synchronizing package databases...
    error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : No address record
    error: failed to update core (No address record)
    error: failed retrieving file 'extra.db.tar.gz' from ftp.archlinux.org : No address record
    error: failed to update extra (No address record)
    error: failed retrieving file 'community.db.tar.gz' from ftp.archlinux.org : No address record
    error: failed to update community (No address record)
    error: failed to synchronize any databases
    I've commented out all but one of the servers in the mirrorlost file to shorten the output.
    Any ideas?

    Snowman wrote:You are trying to fetch non-official dbs which are not on the Arch Linux  mirrors. Are you using Chakra?  Post your pacman.conf
    no I am using normal Arch, and it was working fine until i updated on tuseday. I am using "yaourt -Syu --aur" to update.
    My actual pacman.conf is (changed automaticly to this within unsuccesfull update yesterday):
    # /etc/pacman.conf
    # See the pacman.conf(5) manpage for option and repository directives
    # GENERAL OPTIONS
    [options]
    # The following paths are commented out with their default values listed.
    # If you wish to use different paths, uncomment and update the paths.
    #RootDir = /
    #DBPath = /var/lib/pacman/
    #CacheDir = /var/cache/pacman/pkg/
    #LogFile = /var/log/pacman.log
    HoldPkg = pacman glibc
    # If upgrades are available for these packages they will be asked for first
    SyncFirst = pacman
    #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
    #XferCommand = /usr/bin/curl -C - %u > %o
    #CleanMethod = KeepInstalled
    Architecture = auto
    # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
    #IgnorePkg =
    #IgnoreGroup =
    #NoUpgrade =
    #NoExtract =
    # Misc options (all disabled by default)
    #UseSyslog
    #ShowSize
    #UseDelta
    #TotalDownload
    # REPOSITORIES
    # - can be defined here or included from another file
    # - pacman will search repositories in the order defined here
    # - local/custom mirrors can be added here or in separate files
    # - repositories listed first will take precedence when packages
    # have identical names, regardless of version number
    # - URLs will have $repo replaced by the name of the current repo
    # - URLs will have $arch replaced by the name of the architecture
    # Repository entries are of the format:
    # [repo-name]
    # Server = ServerName
    # Include = IncludePath
    # The header [repo-name] is crucial - it must be present and
    # uncommented to enable the repo.
    # The testing repositories are disabled by default. To enable, uncomment the
    # repo name header and Include lines. You can add preferred servers immediately
    # after the header, and they will be used before the default mirrors.
    [core-testing]
    Include = /etc/pacman.d/mirrorlist
    [desktop]
    Include = /etc/pacman.d/mirrorlist
    #[desktop-testing]
    #Include = /etc/pacman.d/mirrorlist
    [platform-testing]
    Include = /etc/pacman.d/mirrorlist
    [apps]
    Include = /etc/pacman.d/mirrorlist
    #[apps-testing]
    #Include = /etc/pacman.d/mirrorlist
    # An example of a custom package repository. See the pacman manpage for
    # tips on creating your own repositories.
    #[custom]
    #Server = file:///home/custompkgs
    NOW I tried the saved pacman.conf (wich worked fine for months) wich is like this
    # /etc/pacman.conf
    # See the pacman.conf(5) manpage for option and repository directives
    # GENERAL OPTIONS
    [options]
    # The following paths are commented out with their default values listed.
    # If you wish to use different paths, uncomment and update the paths.
    #RootDir = /
    #DBPath = /var/lib/pacman/
    #CacheDir = /var/cache/pacman/pkg/
    #LogFile = /var/log/pacman.log
    HoldPkg = pacman glibc
    # If upgrades are available for these packages they will be asked for first
    SyncFirst = pacman
    #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
    #XferCommand = /usr/bin/curl %u > %o
    #CleanMethod = KeepInstalled
    # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
    #IgnorePkg =
    #IgnoreGroup =
    #NoUpgrade =
    #NoExtract =
    # Misc options (all disabled by default)
    #UseSyslog
    #ShowSize
    #UseDelta
    #TotalDownload
    # REPOSITORIES
    # - can be defined here or included from another file
    # - pacman will search repositories in the order defined here
    # - local/custom mirrors can be added here or in separate files
    # - repositories listed first will take precedence when packages
    # have identical names, regardless of version number
    # - URLs will have $repo replaced by the name of the current repo
    # Repository entries are of the format:
    # [repo-name]
    # Server = ServerName
    # Include = IncludePath
    # The header [repo-name] is crucial - it must be present and
    # uncommented to enable the repo.
    # The testing repositories are disabled by default. To enable, uncomment the
    # repo name header and Include lines. You can add preferred servers immediately
    # after the header, and they will be used before the default mirrors.
    #[testing]
    ## Add your preferred servers here, they will be used first
    #Include = /etc/pacman.d/mirrorlist
    [core]
    # Add your preferred servers here, they will be used first
    Include = /etc/pacman.d/mirrorlist
    [extra]
    # Add your preferred servers here, they will be used first
    Include = /etc/pacman.d/mirrorlist
    #[community-testing]
    ## Add your preferred servers here, they will be used first
    #Include = /etc/pacman.d/mirrorlist
    [community]
    # Add your preferred servers here, they will be used first
    Include = /etc/pacman.d/mirrorlist
    # An example of a custom package repository. See the pacman manpage for
    # tips on creating your own repositories.
    #[custom]
    #Server = file:///home/custompkgs
    #ArchAudio
    # tried and tested packages
    [archaudio-stable]
    Server = http://repos.archaudio.org/stable/x86_64
    #ArchAudio
    # these are..for testing?
    [archaudio-testing]
    Server = http://repos.archaudio.org/testing/x86_64
    #ArchAudio
    # for your pleasure
    [archaudio-experimental]
    Server = http://repos.archaudio.org/experimental/x86_64
    and tried to update with it using pacman, wich doesn't succed also:
    [[email protected] ~]$ sudo pacman -Syu
    Senha:
    erro: O mirror ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch contém a variável $arch, mas não possui arquitetura definida.
    erro: O mirror ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch contém a variável $arch, mas não possui arquitetura definida.
    erro: O mirror ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch contém a variável $arch, mas não possui arquitetura definida.
    :: Sincronizando a base de dados de pacotes...
    erro: falha ao atualizar core (nenhum servidor configurado para o repositório)
    erro: falha ao atualizar extra (nenhum servidor configurado para o repositório)
    erro: falha ao atualizar community (nenhum servidor configurado para o repositório)
    archaudio-stable está atualizado
    archaudio-testing está atualizado
    archaudio-experimental está atualizado
    :: Iniciando atualização do sistema...
    atenção: bristol: local (0.60.5-1) é mais novo que archaudio-testing (0.40.8-1)
    atenção: fil-plugins: local (0.3.0-4) é mais novo que archaudio-testing (0.3.0-3)
    atenção: guitarix: local (0.11.0-1) é mais novo que archaudio-testing (0.06.0-1)
    atenção: kernel26rt: local (2.6.33.7_rt29-1) é mais novo que archaudio-stable (2.6.31_rt10-4)
    atenção: lash: local (0.6.0~rc2-3) é mais novo que archaudio-testing (0.6.0~rc2-1)
    atenção: ll-plugins: local (0.2.1-4) é mais novo que archaudio-testing (0.2.1-3)
    atenção: lv2-c++-tools: local (1.0.3-1) é mais novo que archaudio-testing (1.0.2-1)
    atenção: lv2vocoder: local (1-4) é mais novo que archaudio-testing (1-3)
    atenção: rakarrack: local (0.5.8-1) é mais novo que archaudio-testing (0.4.2-1)
    atenção: rev-plugins: local (0.3.1-3) é mais novo que archaudio-testing (0.3.1-2)
    atenção: swh-lv2: local (1.0.15-3) é mais novo que archaudio-testing (1.0.15-2)
    não há nada a fazer
    [[email protected] ~]$
    !!!all messages are in portuguese but I think it is possible to understand them, if not i will translate
    EDIT:
    OK, I undestand the last problem and I changed my mirrolist from
    # 2010-08-11 23:15
    # generated by reflector
    # ranked by rankmirrors
    Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
    Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/$arch
    Server = ftp://mirrors.kernel.org/archlinux/$repo/os/$arch
    Server = http://archlinux.c3sl.ufpr.br/$repo/os/$arch
    Server = http://archlinux.limun.org/$repo/os/$arch
    Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/$arch
    Server = http://mirrors.kernel.org/archlinux/$repo/os/$arch
    Server = http://www.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/$arch
    to
    # 2010-08-11 23:15
    # generated by reflector
    # ranked by rankmirrors
    Server = ftp://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/x86_64
    Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
    Server = ftp://mirrors.kernel.org/archlinux/$repo/os/x86_64
    Server = http://archlinux.c3sl.ufpr.br/$repo/os/x86_64
    Server = http://archlinux.limun.org/$repo/os/x86_64
    Server = http://ftp5.gwdg.de/pub/linux/archlinux/$repo/os/x86_64
    Server = http://mirrors.kernel.org/archlinux/$repo/os/x86_64
    Server = http://www.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
    and now it's working again
    but I don't understand how this all happened
    AND: how can I force reflector to output a correct mirrorlist for 64bit?
    Last edited by capoeira (2010-08-12 15:18:15)

  • Bdc - errors in flat file

    hi,
    in BDC,
    after uploading data from flat file,
    how to find if there are any errors in flat file,
    before starting the session.

    Hi,
    You have to create internal tables for all the mandatory fields. see the following code :
    I am giving an example for XK01 Transaction.
    TYPES:BEGIN OF TY_XK01,
          LIFNR(10)      TYPE  C ,          "VENDOR'S ACCOUNT NUMBER
          BUKRS(4)       TYPE  C ,          "COMPANY CODE
          EKORG(4)       TYPE  C ,          "PURCHASING ORGANISATION
          KTOKK(4)       TYPE  C ,          "VENDOR ACCOUNT GROUP
          NAME1(35)      TYPE  C ,                              "NAME1
          SORTL(10)      TYPE  C ,          "SORT FIELD
          STRAS(35)      TYPE  C ,          "STREET
          PSTLZ(10)      TYPE  C ,          "POSTAL CODE
          ORT01(35)      TYPE  C ,          "CITY
          LAND1(3)       TYPE  C ,          "COUNTRY KEY
          REGIO(3)       TYPE  C ,          "REGION
          TIME_ZONE(6)   TYPE  C ,          "ADDRESS TIME ZONE
          LANGU(1)       TYPE  C ,          "LANGUAGE KEY
          TELF1(16)      TYPE  C ,          "TELEPHONE NUMBER
          TELFX(31)      TYPE  C ,          "FAX NUMBER
          SMTP_ADDR(241) TYPE  C ,          "E-MAIL ADDRESS
          URI_SCREEN(132) TYPE  C ,     "UNIFORM RESOURCE LOCATOR
          AKONT(10)      TYPE  C ,          "RECONCILITATION ACCOUNT
          ZUAWA(3)       TYPE  C ,          "KEY FOR SORTING ACCORDING TO ASSIGNMENT NUMBERS
          MINDK(3)       TYPE  C ,          "MINORITY INDICATORS
          ALTKN(10)      TYPE  C ,          "PREVIOUS MASTER RECORD NUMBER
          ZTERM(4)       TYPE  C ,          "TERMS OF PAYMENT KEY
          ZWELS(10)      TYPE  C ,          "LIST OF THE PAYMENT METHODS
          WAERS(5)       TYPE  C ,          "PURCHASE ORDER CURRENCY
          END OF TY_XK01,
    BEGIN OF TY_LIFNR,
         LIFNR(10)  TYPE  C ,
         END OF TY_LIFNR,
         BEGIN OF TY_BUKRS,
         BUKRS(4)  TYPE  C ,
         END OF TY_BUKRS,
         BEGIN OF TY_EKORG,
         EKORG(4)  TYPE  C ,
         END OF TY_EKORG,
         BEGIN OF TY_KTOKK,
         KTOKK(4)  TYPE  C ,
         END OF TY_KTOKK,
         BEGIN OF TY_LAND1,
         LAND1(3)  TYPE  C ,
         END OF TY_LAND1,
         BEGIN OF TY_LANGU,
         LANGU(1)  TYPE  C ,
         END OF TY_LANGU,
         BEGIN OF TY_AKONT,
         AKONT(10) TYPE  C ,
         END OF TY_AKONT,
         BEGIN OF TY_ZUAWA,
         ZUAWA(3)  TYPE  C ,
         END OF TY_ZUAWA,
         BEGIN OF TY_MINDK,
         MINDK(3) TYPE  C ,
         END OF TY_MINDK,
         BEGIN OF TY_WAERS,
         WAERS(5)  TYPE  C ,
         END OF TY_WAERS.
    DATA : I_XK01     TYPE TABLE OF  TY_XK01,     "FOR HOLDING DATA FROM FLAT FILE
           I_SUCCMESG TYPE TABLE OF  TY_MESG,     "FOR SUCCESS RECORDS DETAILS
           I_ERRMESG  TYPE TABLE OF  TY_MESG,     "FOR ERROR RECORDS DETAILS
           I_ERROR TYPE TABLE OF TY_ERROR,
    I_LIFNR TYPE TABLE OF TY_LIFNR,
    I_BUKRS TYPE TABLE OF TY_BUKRS,
    I_EKORG TYPE TABLE OF TY_EKORG,
    I_KTOKK TYPE TABLE OF TY_KTOKK,
    I_LAND1 TYPE TABLE OF TY_LAND1,
    I_LANGU TYPE TABLE OF TY_LANGU,
    I_AKONT TYPE TABLE OF TY_AKONT,
    I_ZUAWA TYPE TABLE OF TY_ZUAWA,
    I_MINDK TYPE TABLE OF TY_MINDK,
    I_WAERS TYPE TABLE OF TY_WAERS,
    I_FINALMESG TYPE TABLE OF TY_ERROR,
    I_MESG TYPE TABLE OF TY_MESG.
    *& WORK AREA DECLARATION
    DATA:  WA_XK01     TYPE TY_XK01,               "FOR HOLDING DATA FROM FLAT FILE
           WA_SUCCMESG TYPE TY_MESG,               "FOR SUCCESS RECORDS DETAILS
           WA_ERRMESG  TYPE TY_MESG,               "FOR ERROR RECORDS DETAILS
           WA_ERROR TYPE TY_ERROR,
    WA_LIFNR TYPE TY_LIFNR,
    WA_BUKRS TYPE TY_BUKRS,
    WA_EKORG TYPE TY_EKORG,
    WA_KTOKK TYPE TY_KTOKK,
    WA_LAND1 TYPE TY_LAND1,
    WA_LANGU TYPE TY_LANGU,
    WA_AKONT TYPE TY_AKONT,
    WA_ZUAWA TYPE TY_ZUAWA,
    WA_MINDK TYPE TY_MINDK,
    WA_WAERS TYPE TY_WAERS,
    WA_MESG TYPE TY_MESG,
    WA_FINALMESG TYPE TY_ERROR.
    INITIALIZATION.
    SELECT LIFNR FROM LFA1 INTO TABLE I_LIFNR.
      SELECT BUKRS FROM T001 INTO TABLE I_BUKRS .
      SELECT EKORG FROM T024E INTO TABLE I_EKORG .
      SELECT KTOKK FROM T077K INTO TABLE I_KTOKK .
      SELECT LAND1 FROM T005 INTO TABLE I_LAND1.
      SELECT SPRAS FROM T002 INTO TABLE I_LANGU.
      SELECT SAKNR FROM SKA1 INTO TABLE I_AKONT .
      SELECT ZUAWA FROM TZUN INTO TABLE I_ZUAWA .
      SELECT MINDK FROM T059M INTO TABLE I_MINDK .
      SELECT WAERS FROM TCURC INTO TABLE I_WAERS.
    LOOP AT I_XK01 INTO WA_XK01.
          TRANSLATE WA_XK01-LIFNR TO UPPER CASE.
          READ TABLE I_LIFNR INTO WA_LIFNR WITH KEY LIFNR = WA_XK01-LIFNR.
          IF SY-SUBRC = 0 .
            CONCATENATE WA_MESG-MESG TEXT-100 WA_XK01-LIFNR TEXT-101  ' , ' INTO WA_MESG-MESG.
          ENDIF.
          TRANSLATE WA_XK01-BUKRS TO UPPER CASE.
          READ TABLE I_BUKRS INTO WA_BUKRS WITH KEY BUKRS = WA_XK01-BUKRS.
          IF SY-SUBRC <> 0 .
            CONCATENATE WA_MESG-MESG  TEXT-102 WA_XK01-BUKRS TEXT-103  ' , ' INTO WA_MESG-MESG.
          ENDIF.
          TRANSLATE WA_XK01-EKORG TO UPPER CASE.
          READ TABLE I_EKORG INTO WA_EKORG WITH KEY EKORG = WA_XK01-EKORG.
          IF SY-SUBRC <> 0 .
            CONCATENATE WA_MESG-MESG TEXT-104    WA_XK01-EKORG  TEXT-103  ',' INTO WA_MESG-MESG.
          ENDIF.
          TRANSLATE WA_XK01-KTOKK TO UPPER CASE.
          READ TABLE I_KTOKK INTO WA_KTOKK WITH KEY KTOKK = WA_XK01-KTOKK.
          IF SY-SUBRC <> 0 .
            CONCATENATE WA_MESG-MESG TEXT-105   WA_XK01-KTOKK  TEXT-103   ',' INTO WA_MESG-MESG.
          ENDIF.
          TRANSLATE WA_XK01-LAND1 TO UPPER CASE.
          READ TABLE I_LAND1 INTO WA_LAND1 WITH KEY LAND1 = WA_XK01-LAND1.
          IF SY-SUBRC <> 0 .
            CONCATENATE WA_MESG-MESG TEXT-106   WA_XK01-LAND1  TEXT-103   ',' INTO WA_MESG-MESG.
          ENDIF.
          TRANSLATE WA_XK01-LANGU TO UPPER CASE.
          READ TABLE I_LANGU INTO WA_LANGU WITH KEY LANGU = WA_XK01-LANGU.
          IF SY-SUBRC <> 0 .
            CONCATENATE WA_MESG-MESG TEXT-107  WA_XK01-LANGU  TEXT-103   ',' INTO WA_MESG-MESG.
          ENDIF.
          READ TABLE I_AKONT INTO WA_AKONT WITH KEY AKONT = WA_XK01-AKONT.
          IF SY-SUBRC <> 0 .
            CONCATENATE WA_MESG-MESG TEXT-108   WA_XK01-AKONT  TEXT-103  ',' INTO WA_MESG-MESG.
          ENDIF.
          READ TABLE I_ZUAWA INTO WA_ZUAWA WITH KEY ZUAWA = WA_XK01-ZUAWA.
          IF SY-SUBRC <> 0 .
            CONCATENATE WA_MESG-MESG TEXT-109    WA_XK01-ZUAWA  TEXT-103   ',' INTO WA_MESG-MESG.
          ENDIF.
          READ TABLE I_MINDK INTO WA_MINDK WITH KEY MINDK = WA_XK01-MINDK.
          IF SY-SUBRC <> 0 .
            CONCATENATE WA_MESG-MESG TEXT-110    WA_XK01-MINDK  TEXT-103   ',' INTO WA_MESG-MESG.
          ENDIF.
          TRANSLATE WA_XK01-WAERS TO UPPER CASE.
          READ TABLE I_WAERS INTO WA_WAERS WITH KEY WAERS = WA_XK01-WAERS.
          IF SY-SUBRC <> 0 .
            CONCATENATE WA_MESG-MESG TEXT-111   WA_XK01-WAERS  TEXT-103   ',' INTO WA_MESG-MESG.
          ENDIF.
    append wa_mesg to err_mesg. 
    endloop.
    I am populating the error messages into workarea using concatenate statement.
    Hope this  solves the problem.
    Reward points if helpful.
    Thanks and Regards,
    Narayana.

  • In Mail when deleting a file i get this response 68615.emlx" couldn't be copied to "Messages

    in Mail when deleting a file i get this response 68615.emlx” couldn’t be copied to “Messages
    Donnie
    <Edited By Host>

    HT2500 Error when deleting email: Apple Support Communities

  • Error Handling in File Adapter

    I have been working on a requirement where the file adapter picks up the file and gives to the BPEL for processing the data.
    So, in order to do Error Handling for file adapter, i have been reading the Oracle documentation for technology adapters. In that, some of the
    points which i felt valuable for my error handling when using file adapter are the uniqueMessageSeparator property, fault-policies for rejected messages,
    and one of the action for rejected messages could be writing the payload to a file or invoking any other webservice.
    In my composite, i have configured the file adapter as a service for reading files, and i defined the xsd using the native format builder....If i put some data like 'aaaa' in the attribute of type integer , the .csv file is being picked up and its being passed to the BPEL without any error ? I believe there should be a translation error...right...
    But i am not getting the error, please tell me if anything is wrong in my xsd....
    Here is my xsd...
    <?xml version="1.0" encoding="UTF-8" ?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
    xmlns:tns="http://TargetNamespace.com/InboundService"
    targetNamespace="http://TargetNamespace.com/InboundService"
    elementFormDefault="qualified"
    attributeFormDefault="unqualified"
    nxsd:version="NXSD"
    nxsd:stream="chars"
    nxsd:encoding="US-ASCII"
    nxsd:hasHeader="true"
    nxsd:headerLines="1"
    nxsd:headerLinesTerminatedBy="${eol}"
    >
    <xsd:element name="names">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="name" minOccurs="1" maxOccurs="unbounded">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
    <xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
    <xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" />
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:schema>
    And for DB Adapter, there is a property called SchemaValidation, i think that is not there for File adapter, by default it will take care of validation i guess....In another composite, my file adapter is picking up the .xml file and if i put any wrong data over there, that is working fine, i am getting the translation error, but only here in the case of csv file, i am not getting the error. Experts, please help me in this regard...I am using SOA 11G
    Thanks,
    Naresh

    Hi Yatan,
    Thanks for the reply. I did the same way, where my composite is picking up an XML file and translation error is coming. Even the fault policies are working fine, like writing to a file and even invoking other web service. Its really good that you have achieved the same thing in csv files. But the same thing i am unable to achieve when my file adapter is picking up the csv file. I really cant understand where i am doing wrong.
    here is my XSD which i defined through my native builder format...
    <?xml version="1.0" encoding="UTF-8" ?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
    xmlns:tns="http://TargetNamespace.com/FileRecv"
    targetNamespace="http://TargetNamespace.com/FileRecv"
    elementFormDefault="qualified"
    attributeFormDefault="unqualified"
    nxsd:version="NXSD"
    nxsd:stream="chars"
    nxsd:encoding="US-ASCII"
    nxsd:hasHeader="true"
    nxsd:headerLines="1"
    nxsd:headerLinesTerminatedBy="${eol}"
    >
    <xsd:element name="Roots">
    <xsd:complexType>
    <xsd:sequence>
    <xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy="&quot;" />
    <xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy="&quot;" />
    </xsd:sequence>
    </xsd:complexType>
    </xsd:element>
    </xsd:schema>
    the jca file ..
    <adapter-config name="FileRecv" adapter="File Adapter" wsdlLocation="FileRecv.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
    <connection-factory location="eis/FileAdapter" UIincludeWildcard="n*.csv"/>
    <endpoint-activation portType="Read_ptt" operation="Read">
    <activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
    <property name="DeleteFile" value="true"/>
    <property name="MinimumAge" value="0"/>
    <property name="PhysicalDirectory" value="C:\files"/>
    <property name="Recursive" value="false"/>
    <property name="PollingFrequency" value="5"/>
    <property name="IncludeFiles" value="n.*\.csv"/>
    <property name="UseHeaders" value="false"/>
    </activation-spec>
    </endpoint-activation>
    </adapter-config>
    I told that the file will contain only 1 record while defining xsd and i kept a record whose values are John , Peter and akjdkjdskj.
    Now if the data is like above, the file is still getting picked up without any translation error and the BPEL is getting completed successfully...
    Is it possible for you to send your sample project and the csv file from which you have defined the xsd to me if you dont mind ?
    Thanks,
    Naresh

  • Error parsing PLV file

    I get an error message attempting to use the 'Plan Visualizer'. I posted a question on this subject already and got the feedback from one of SAP's own HANA gurus that it probably is due to a bug ( Error parsing PLV file  ).
    Since I have not seen anybody else raising the same issue and there are others (my assumption) using the same set-up as I am (HANA SP8 on BW740 SP8) I suppose that it is very possible that it is not a real bug (since IF it indeed is a bug, others must have had the same problem).
    Is there anyway to get a confirmation if this is a bug (requiring a fix by e.g. OSS) or a problem specific to my installation/set-up/configuration that I might be able to fix (myself or with help).
    As you can imagine I am keen on solving this since it is quite a handicap to not be able to analyze the performance in the system.
    Thanks.

    For older versions of JRockit, you had to use exactly the same version of JRockit when you created the recording as when you opened it.
    With more recent versions (R26.0 and later iirc) it is sufficient if the JRA reader version is >= the version of JRockit producing the recording. Or in other words, make sure you are running the latest version of JRockit on your developer workstation.
    -- Henrik

Maybe you are looking for

  • Downloading files from a time capsule

    What kind of cord do I use to connect a time capsule to the macbook air I'm transferring files to?

  • Sold to party and ship to address is different

    Dear Experts, Sold to party and ship to party is different  address but when invoice is happened sold toparty adrees  displayed in ship to party how i can make the changes for ship to party kindly help me in this regards Thanks a Basavaraj

  • IPhoto library gone. Can it be restored?

    I was copying my iPhot library to another account on my MacBook Pro (I noe realize this isn't the way to do it). Anyway as the library was copying my computer locked up and I had to hard reboot. Since the reboot the library doesn't show up anywhere.

  • Adobe Premiere Pro CS6, format for exporting video to web.

    On the Adobe Premiere Pro CS5.5 I used the format "H.264" and preset "Apple Ipad 400x224, 16x9, 29.97, 400kbps." That preset isn't available in the Adobe Premiere Pro CS6 edition. What would you recommend that would be comparable and good for exporti

  • Need advice in impl webservices

    I have a spring application, where i am reading a database constantly and putting filtered data in some other database. App is ready and now i want some other application (may be written in java, php or .net) to manage the execution of this applicati