Mailing lists were working just perfect, but........ ! :(

Helloes all,
I have been using mailing lists with ims5.2, that are defined using a dynamic ldap query,
ldap:///dc=ju,dc=edu,dc=jo??sub?(&(|(objectclass=person)(objectclass=groupofuniquenames))(cn=*))
for the last 6 months, with no problems! but suddenly this morning, all emails sent to this emailing list return with delivery error:
Your message cannot be delivered to the following recipients:
Recipient address: [email protected]
Reason: no addressees: [email protected]
the only difference in these days that the number of users is increasing dramatically! i don't know if this is related to number of users in the ldap query!
can u please help!

iMS 5.2, with iDS 5.1 and direct ldap mode,
the ldap query is to return all the users in the directory, now total to 1233 user,
here are the tests that i made:
1- From the iMs serach perfom a search on all users, and it will retreive all entries successfully and so fast.
2- on the mail list properties from iMS server, members tab, contruct a dynamic ldap query, with cn contains *, and it retrieves all acount successfully.
3- on the mail list properties from iMS server, the email only members, contstruct the same ldap query as in 2, but when i tend to test it, it takes so much time, my count is 80 seconds, and retrieves only first entry, and when i tend to send an email to this list, i get the no addresses error failure delivery.
4-on iDS 5.1 search, advanced i contructed the same search with cn contains *, and it retrieves all entries successfully.
and another problem that has appeared today, i don't know if it related, i used to connect to my ldap iDS server through outlook express and microsoft outlook, defining the ldap, and base search ..etc, and it used to go smoothly, but it is not working anymore too,
I did something last week, but on another machine, i have installed sunone application server, and identity server and connected to the existing sunone directory server ( the one with problems now), and finally installed the portal server, all those were installed on a different server,
i am puzzeled!??!!!

Similar Messages

  • I did a backup from all my files saved in old external hd to time capsule. After that double checked and recover one file from TC to mac air and it worked just perfect. Today went through TC to recover another file and none of them were there?

    I did a backup from all my files saved in old external hd to time capsule. After that double checked and recover one file from TC to mac air and it worked just perfect. Today went through TC to recover another file and none of them were there?Anybody has a clue what happened?

    renatocremonese wrote:
    I want to use it for backing up my Mac.
    It's good for that . . . 
    But also I don't keep all my stuff in my Mac.
    But not for that. 
    This older and not day-by-day usage files I want to store in the time machine.
    You can do that (see below), but how are you going to back them up?   If your only copies are on the TC, when (not if) it fails, you risk losing your only copy of the data.
    Is it possible to split TC in two partitions.
    No, but there are some workarounds, including making a fixed-size disk image on it to "reserve" some space.  See #Q3 in Using Time Machine with a Time Capsule.
    But you still won't have backups of the stuff you put there.
    You don't say what kind of Mac you have.  If it's a desktop model, just keep the external HD connected to it, and let Time Machine back it up along with your internal HD.
    However, it sounds like you may have a laptop, where that's not going to be convenient.  In that case, your best bet might be to copy the external HD to a disk image on the TC as above, then keep the HD in a safe place.
    To finish, when i enter the TC and go through the Time line how can I get a file from there and move it back to Mac hd.
    Via the "Star Wars" display, per #15 in Time Machine - Frequently Asked Questions.
    You might also want to review the Time Machine Tutorial, and perhaps browse the rest of the FAQ.

  • Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

    Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

    Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share,  as I am facing real problem because of this...

  • Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Snow Lepard it work just perfectly... help please.

    Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Snow lepard it work just perfectly... help please.

    Reinstall MacFuse with the one from http://www.tuxera.com/mac/macfuse-core-10.5-2.1.9.dmg. If that doesn't work, you can use Paragon NTFS for Mac 9.0 which has been designed to work with Lion.

  • Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Lion it work just perfectly... help please.

    Just bought a mac air with OS X v.10.7 Lion, for work I need to read and write NTFS drives, I install MacFuse and NTFS-3G, but it can not mount (recognize?) External HDD, in my MBP with Lion it work just perfectly... help please.

    Sorry in my MBP Snow lepard it work.. don't have Lion In MBP

  • Why can't I get secure mailing lists to work in IMS 5.1

    I am having problems getting secure mailing lists to work at all. I
    have been battling with iPlanet support and have gotten no where. Evan
    though a local user or a remote email user is listed as allowed senders
    in the IDA, it still will not let either send a message to the list. I
    checked to make sure that the allowed senders showed up in the LDAP
    entry as mgrpallowedbroadcasters and they are. I evan set up a test
    server from scratch and ran into the same issue. Each time an allowed
    user tries to send they get the following error:
    SMTP Error: 5.7.1 you are not allowed to use this list:
    [email protected]
    Anyone else seeing these issues?? Does anyone what could be going
    wrong??

    I'm not sure what is happening, but here are some tips to help debug the problem.
    Put MM_DEBUG=5 in your option.dat file and recompile/restart dispatcher. Put master_debug slave_debug in the defaults section or only appropiate channels and then recompile/restart dispatcher.
    The resulting logs should give you information about just why it is failing.

  • The attach a file button (in netzero e-mail) does not work in firefox but does in explorer

    The "attach file button" (in net zero e-mail) does not work in firefox but does in explorer.
    == URL of affected sites ==
    http://

    *Tools > Options > Privacy > History: Firefox will: "Use custom settings for history"
    *Tools > Options > Privacy > History: "Remember search and form history"
    See also [[Form autocomplete]]

  • My AI program (CS5 Illustrator 15.1.0) will not open some PDFs. It was working just yesterday, but now will only open a PDF if the graphics of the PDF is visible in the box that appears in the lower left corner of the dialog box after you click Open. The

    My AI program (CS5 Illustrator 15.1.0) will not open some PDFs. It was working just yesterday, but now will only open a PDF if the graphics of the PDF is visible in the box that appears in the lower left corner of the dialog box after you click Open. The file size does not seem to matter. Any ideas?

    Hello Kathie,
    Sorry for the inconvenience that has caused to you.
    Please let me know if you have tried converting any other PDF to word with Reader.
    Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
    Let me know if this converts fine.
    Hope to hear from you.
    regards,
    Anubha

  • HT5012 I had my iPad replaced this past Thursday and it is working just fine but my Bluetooth keyboard is not now working.  I need to know what I need to do to get it to work.  Thanks, Joyce Lenzo

    I had.my iPad replace this past Thursday at the Apple store under warranty and it is working just fine but the Bluetooth separate keyboard is not working.  Thanks, Joyce Lenzo

    Maybe:
    Wireless input devices: Bluetooth frequently asked questions

  • My wireless earbuds work just fine, but some third-party apps play audio only through the iPod speaker even though the buds are properly connected.

    My wireless earbuds work just fine, but some third-party apps play audio only through the iPod and iPhone speaker even though the buds are properly connected. Does anyone know why and is there a solution?

    Assuming you are using Bluetooth headphones, do the apps have the option to use Bluetooth?
    The app should have an option to select the speaker (or wired earphones) or the Bluetooth headphones.
    You can also try:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up              
    Restore to factory settings/new iPod

  • Outgoing mail server will work on Iphone but not Mail on Macbook

    My POP account will send mail on my iphone no problem, but on the mail program on my macbook it times out. All the account information is identical. The mail program keeps telling the server does not support port 995, but on the Iphone it does. I have tried changing the port but it still won't work. Suggestions please!

    misilulu, outgoing mail uses the SMTP protocol on ports, 25, 587 (for submission only) and, in the case of SMTPS, port 465 (rarely used and deprecated).
    The POP is used for incoming mail on ports 110 or, in the case of POP over SSL, 993.
    If all the settings between your iPhone and your MacBook are the same and you are having problems sending outgoing email on your MacBook it is most likely because you are using the wrong port. If you are using port 25 then it is most likely that your ISP is blocking that port for all mail servers except their own. If that is the case try the mail submission port 587. If that doesn't work then try 465 as a last resort.

  • My modem works just fine, but my airport extreme refuses to connect to the internet.  I even reset it more than once, changed the DNS servers and still nothing.  Help

    Ok so recently we were having problems with our phone.  We had to disconnect our modem in order to fix the phone lines and when that happened, our airpot extreme disconnected itself from the internet.  No matter what I did i could not get it to connect back.  I would power down the modem, I would reset the AE and nothing would happen.
    I tried changing the DNS server and nothing happened.  I always get the same messages in the airport utility app: No internet connection and no DNS server
    Nothing I seem to do works.  I do know for a fact though, that the problem is not the modem.  I have connected it through ethernet to other devices and the internet has worked just fine. 
    Please please please if anybody sees this help me out!!

    Since you feel good about having internet access up to your Airport, I would suggest as a next step checking your Airport's status light to see if it is giving any clues as to what may be going on. Below is some info on what the light can indicate
    AirPort Express Status light sequences and what they indicate.
    No light (Off) - AirPort Express is unplugged
    Solid green - AirPort Express is on and working properly.
    Flashing amber - AirPort Express is not set up or cannot establish a connection to the network or
    the Internet. Use AirPort Utility to find out the cause. See “If Your AirPort Express
    Status Light Flashes Amber” on page 20.
    Solid amber - AirPort Express is starting up.
    Flashing amber and green - There may be a problem starting up. AirPort Express will restart

  • The "edit in" does not launch if I make any develop changes.  I am using LR 5.6 and all of my plug ins are properly installed, up to date and were working just fine.  Edit in does work if I reset the image or load an unmodified DNG.

    I am using LR5.6 on a Windows 7 machine with plenty of memory.  LR, CS5 and all of my plug ins have been working just fine.  Tonight I've found that if I make any kind of significant adjustments to an image, and the go to "Edit in.." that function does not launch.  I can use the Edit in command on an unmodified image, or if I reset the modified image.  I have the issue with all of my plug ins, including Photoshop, all of the Nik software, RadLab, and OnOne.  I believe that all of the plug ins are current.  I've been working with them yesterday and I had no issue.  I cannot recall anything that has changed since then, and I have not installed any software.  I'm at a loss!!  Please help!

    I have traced the problem to a corrupted profile.  When I captured the images in question, I also used Color Cherckr to create a profile for processing.  When I apply that profile to the adjustments I make, I can no longer "Edit In".  If I use another profile, even one that I created using Color Checkr at a different point in time, I don't have the issue.  Something seems to have corrupted the new profile.  I will re-create the profile and see if the issue is resolved.

  • Firefox closed and now it says that I get a connection error. IE and AOL work just fine but I use my Firefox won't connect

    I use Firefox for going online all the time. Now, suddenly, when I try to connect it says the server can't be found. Internet Explorer and AOL are working just fine. However, I don't want to use them.

    How do you fix this?

  • P45 Platinum - Vista works just fine, but unable to get into BIOS

    This is my first build, so I'm still learning a lot. Be kind!
    I'm using the P45 Platinum with an Intel Core 2 Duo 3.0ghz Wolfdale cpu, 2 2gb sticks 1066mhz G-Skill ram, a Corsair 750w PSU, EVGA Nvidia 8800GTS video card, a 74gb WD Raptor HDD and a 250gb WD Caviar HDD (both SATA). I'm currently running 32bit Vista until 64bit has more support.
    I have never been able to access the BIOS - before Vista was installed the splash screen was too fast so I kept missing my oppurtunity to enter BIOS, so I went ahead and put in the Vista install DVD. It installed just fine - it doesn't see my second HDD, but I expected that due to it being SATA.
    I want to enter the BIOS to disable the audio so I can download the new Realtek audio drivers (I have no sound, even after installing the driver off the CD), but when I start up the computer and hit DEL (when prompted), it takes me to the Windows Boot Manager. Several times I have repeated the process and every time it takes me to the boot manager instead of the BIOS. The BIOS is obviously working, I just can't access it.
    Any help is appreciated.

    Quote
    I have never been able to access the BIOS - before Vista was installed the splash screen was too fast so I kept missing my oppurtunity to enter BIOS
    Simply keep hitting  >DEL< as soon as the Splash screen appears.  If that doesn't help, clear CMOS with main A/C power cable removed from PSU.  Upon restart the system should hold with a CMOS Checksum error and give you the chance to hit F1 to enter BIOS Setup.  Now you can load "Optimized Defaults" and disable the BOOT LOGO.

Maybe you are looking for

  • LSMW: Uploading Vendor Master : Muliple-Items

    Hi , This is Prabhu , i created one LSMW for Uploading vendor Master .For Withholding tax Type i have to upload atleast 18 items.for that one I given Pagedown to Fill all The Item.But In the maintaining Source Structute I am getting Error.How can ove

  • Function calling in thread

    I know that every thread has it own stack which is not shared with the other threads. Now for example, I have a program like: Whenever a user connects to the server a separate thread is created and receive method is called. mythread = new thread(this

  • Do the artists still get paid?

    I just mailed [email protected] with this question: Apple generously gave me a refund recently when there was a problem with my iTunes download. But do the artists still get paid in these circumstances? The support employee couldn't tell me. Does any

  • How to achieve an image loading affect?

    Hello, Before you continue, take note that this affect only seems to work in Mozilla Firefox and Google Chrome - Website Link : http://boinx.com/ [Should work with most images on the website] I am a web designer and when browsing the internet, I noti

  • DFS ABE on Existing File Server

    I have a couple questions about DFS. We currently have a file server that we need to setup Access Based Enumeration on to hide folders the user does not have access to. The server is 2008 R2 in a Windows 2003 Forest & Domain. I've read contradicting