Main optimizer error - There is already a transaction for the system

Hi Guru's,
   I am trying to download support packs from maintenance optimizer in solution manager system. When i select the logical system it gives the error
'There is already a transaction for the system of this product version'
After this error, it does not proceed further.
There is many maintanence transactions in Maintanence optimizer. Now how to remove all these.
Any ideas or solutions most welcome.
Moses

As Christian has already written, the only problem is that there is already an open Maintenance Transaction for that specific system. Maintenance Optimizer checks that you do not open two different Maintenance Transactions for a system at the same time.
You only have to withdraw the old Maintenance Transaction to be able to proceed with the new one. Open the old Maintenance Transaction and click "Withdraw" on the bottom of the page. If it is grayed out, you need to go one step backwards, there you can withdraw it.
Best regards,
Joachim

Similar Messages

  • There is already a transaction for the systems of this product version(MOPZ)

    Hello All,
    I am trying to configure maintenance optimizer in Solution Manager 7.0
    on Windows 2003 server and SQL 2005 server.
    I am configuring this for SAP CRM 2007 server.
    Created the server, database and system in SMSY
    Created Logical Component in TA code SMSY
    SM59 connection for SAP-OSS is OK.
    S-User is assigned to a User.
    Created a solution using TA code solution_manager.
    Defined the product version for the solution created in the TA code
    solution_manager.
    When creating a Maintenance Optimizer transaction, I select the
    product version and its logical component in the Plan Maintenance
    (Phase) and click on Continue to go to Select Files Phase, I get below
    warning:
    Information Procedure 8000000130 Saved
    Warning: Status was reset by system
    Warning: There is already a transaction for the systems of this
    product version
    I cannot get pass this phase.
    I have deleted and recreated the solution, carried out the same
    activity again but its giving the same Warning
    Warning: Status was reset by system
    Warning: There is already a transaction for the systems of this
    product version
    Any help will be appreciated???
    Regards,
    Satish.

    Hello Ragu,
    Thanks for your response.
    As of now, we do not have ChaRM in place. Secondly, we use a single customer number.
    I would like to let you know that in our landscape we have two CRM server, one ECC sever, one SOLMAN7.0 server.
    I tried to configure MOPZ for CRM, ECC, SOLMAN server to download the respective STACKS.
    I was successful in configuring CRM and SOLMAN.
    But  when I tried to configure in ECC, it failed due to RFC erros.
    So I deleted the transaction for the ECC system and deleted the system itself in Solution Manager.
    Reconfigured the Systems in "SMSY", RFC connections are correctly defined to configure MOPZ between SOLMAN7.0 and ECC6.0.
    When I start configuring the MOPZ, I cannot get pass the first phase and this is when I get an error: There is already a transaction for the systems of this product version.
    Please let me know if you need further information.
    Regards,
    Satish.

  • Active transaction for the systems of this product version

    Hi All,
    When i tried to create a new transaction for maintenance optimizer, I received the warning below:
    There is already a transaction for the systems of this product version
    The solution from note 1296589 does not help.
    Transaction code /n/tmwflow/maintenance only show one open session (the current session).
    Regards,
    KayJay

    > When i tried to create a new transaction for maintenance optimizer, I received the warning below:
    > There is already a transaction for the systems of this product version
    What happens if you click on the button "Maintenance transactions" just next to the "new Maintenance" button?
    Markus

  • Query 0: Runtime error There is already a line with the same key. with para

    Dear all,
    I have a query with several variables. One of the variables is Version. When I use certain values e.g. 1,2 or 3, I can generate the query without any problem. However, when I use the other values e,g, 4, 5, or 6, the query gives me with the following error messages :
    1. Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
    2. Error while reading data; navigation is possible
    3. >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
    Error 1
    Query 0: Runtime error There is already a line with the same key. with parallel processing via RFC
    Message no. DBMAN428
    Error 2
    Error while reading data; navigation is possible
    Message no. BRAIN289
    Diagnosis
    An error occurred while reading the data. The query result is therefore empty or inconsistent and is not buffered in the OLAP cache.
    Procedure
    You can continue to navigate or return to the last navigation step.
    Error 3
    >> Row: 174 Inc: LRSDRPU02 Prog: SAPLRSDRP
    Message no. RS_EXCEPTION301
    Diagnosis
    En error has been triggered. This message specifies where in the coding the error occurred. This helps you to localize the error quickly.
    May I know what causes this error and how to troubleshoot it?
    Thank you.

    Venkat,
    You are either a genius or working for SAP.
    In any case, your solution solved my problem.
    Thanks heaps!

  • Tcode  PFAL there is no model view for the distribution of HR Data.

    Hi friends ,
    i am facing new problem,i want to send iDOC to other system.
    previeous its working fine.
    but to day  when i open tcode PFAL.
    it give me Error:"There is no model view for the distribution of HR master data"
    what is the solution for that.
    i want to send HR Data.
    its urgent please give me any solution ithat will help me alot.
    thanks in advance

    There is already Distributed Model Created.
    can u give me annother tcode so i can  send Metarial data, by IDOC.
    please help me.
    Thanks

  • Error -RFC_ERROR_SYSTEM_FAILURE- There is already a line with the same key.

    Hi,
    While executing a report in BEx am faced with the error above. It ocurs when i take a drill down on Purchase order number field ( free charact). I tried by inserting this info-object into rows but still teh same error occurs and the connection with teh server is snapped.
    The said field is also an user input field and the variable does not seem to the working as data other than the input values is fetched. There is a dump in ST22 with teh following error analysis-
    You wanted to add an entry to table
    "\FUNCTION-POOL=RRK0\FORM=EMPTY_COPY_DAT_N\DATA=<L_TSX_CSKID>[2
    you declared
    with a UNIQUE KEY. However, there was already an entry with the
    same key.
    This may have been in an INSERT or MOVE statement, or within a
    SELECT ... INTO statement.
    Plz guide
    Regards,
    Saurabh Diwakar

    Hi,
    take a look at this SAP note:
    Term ITAB_DUPLICATE_KEY; SAPLRRK0; empty_copy_dat_n_01
    SAP Note Number: [966238 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393636323338%7d]
    Regards
    Andreas

  • Error while importing tabledata: There are no readers registered for the

    I try to import data from another table. I exported in different types - sql and xml, cvs... Now if Itry to import this data SQLDeveloper is boring me with the Message:
    "There are no registered readers for the sql type."
    or
    "There are no registered readers for the xml type."
    or
    "There are no registered readers for the cvs type."
    So where do I have to register wich readers?
    Another Problem: I tried to start the import "semi-" manually while copiieng the INSERT-Statements from the sql-Dataset to SQLDeveloper. So I noticed that the exported Date has Commas instead of points - like here:
    .'650.507.9833'.to_date('21.06.99','DD.MM.RR').'SH_CLERK'.2600.null.124.50);
    Is it possible to configer the SQLDeveloper, because this statement causes an error.
    Thanks a lot
    Torsten

    My Operating System is Window XP professionel and there is jre 1.4 running. When I execute the SQL-Statement I get the following result:
    PARAMETER VALUE
    NLS_NUMERIC_CHARACTERS ,.
    1 rows selected
    The thing that really makes me thoughtful is that SQLdeveloper doesn't know its own export-format...
    greets
    Torsten

  • When i go to send a new text, the text field isn't blank.  There is already text entered in the message body.

    When i go to send a new text, the text field isn't blank.  There is already text entered in the message body that I have to go in and delete before typing my new text.  this prevents me from forwarding anything through text because if I get something I wish to forward, selecting forward as an option always brings up the same junk just like when trying to send a new message.  How can i remedy this?

    Here it goes -
    1) Download iBackupBot: http://download.cnet.com/iBackupBot/3000-2141_4-10969873.html
    2) Plug phone into computer and run backup
    3) Use "Explorer" box to find Messages: HomeDomain/Library/SMS/Drafts/(null).draft/
    4) In "Null Drafts" there is a file "message.plist"
    5) Double click to open, (cancel the popup if you did not purchase the iBackupBot) and you will see the prepopulating message on the <string> line 6
    6) Delete the offending text, leave all code
    7) Close text editor
    8) Right click on message.plist file and select "Restore selected item(s) to device"
    9) File will be restored to your phone and it will restart itself.
    10) Voila! Now it is time to consider that Windows phone....:)

  • On hand quantity exists or there are open delivery transactions for this item

    Hi all,
           on hand quantity exists or there are open delivery transactions for this item in oracle apps at the master item copy from & lines status in Transaction Form in Backordered.
    Thank You

    Hi,
    Make sure you completely receive the PO, then you should be good enough to convert the item to expense.
    Thanks
    -Arif.

  • I keep getting an error "There was a problem connecting to the server" ....and an ip address is listed

    Every time I print to a pdf I get an error message that there was a problem connecting to a server. I am running a mac with windows parallels and the error happens in parallels. It seems that somehow the PDF software has captioned a deleted IP address and keeps pointing to this and as this IP address does not exist it produces the error. Can someone help me as I need to find where PDF stores this information and delete it..as it is driving me crazy as the error is continuous. Thank you

    Look in the System Preferences -> Accounts.  Click on the Login Items tab. I bet there is an entry for your drive.  Use the "-" to delete it.

  • HT2534 I have already created an Apple ID. I tried to sign in on iTunes, but it said that i have not yet used this ID on iTunes yet. It then directed me to the billing page. There was no option "none" for the credit card payment. It won't let me continue.

    I have already created an Apple ID. I tried to sign in on iTunes, but it said I have not yet used this ID with iTunes. It then directed me to the billing page. There was no option "none" for the credit card payment. It will not let me continue without entering one in.

    - Add a credit card or other payment method like redeeming an iTunes gift card.
    - Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
    Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

  • Please cancel this order immediately and refund my credit card. This product is for Windows only. I run a Mac. You did not state in your advert that this was windows only. This transaction has cost me money as there will be a charge for the Canadian excha

    AD015968571 : Please cancel this order immediately and refund my credit card. This product is for Windows only. I run a Mac. You did not state in your advert that this was windows only. This transaction has cost me money as there will be a charge for the Canadian exchange fee.
    No other way to contact Adobe. All Email undeliverable.

    These are user to user forums
    Phone support | Orders, returns exchanges
    http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Creative Cloud support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

  • Error "Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"

    I have a Curve 8300.  With OS v4.5.0.81.  And I am on a BB Social network plan through my cell providor "Fido".
    I mainly use it for Facebook & Twitter  and have no problems using either app.  However I was prompted for an update for my twitter recently but wasn't near a wifi spot to update.  Just decided to update today at home where I do have wifi.  However when I go to do the update, it gives me the following error:
    "Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"
    I have scoured for answers but haven't had much luck.  I tried checking for OS updates.  I apparently have the most current one that my phone will support.  I uninstalled twitter and then tried to reinstall it via the twitter Icon on my phone.  Got the same error.  Tried reinstalling it through app world, it installed just fine.  However it installed the version that I had previously had.  So I went to twitter's settings and checked for updates.  It prompted for one as I expected it would.  And when I tried to get the update.  It gave me that error again.  I can use twitter as it is, but I don't see why my phone shouldn't be able to get all the updates for various apps.  Is it a software compatability issue?  Is it a hardware compatability issue?  Is there anything I can do to get the update or do I just have a phone that won't take some app updates?

    Hi and welcome to the forums!
    The 8300 is not listed in the device upgrade table for Blackberry device OS v5.0. The newer versions of apps like Twitter and Facebook require device OS v5.0 to run correctly. Might be time to consider a new device!
    Thanks,
    Bifocals
    BlackBerry Device Software 5.0 main support page
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Error message saying a device attached to the system is not functioning

    i m getting an error message saying a device attached to the system is not functioning whenever i m trying to connect my pc to my smartphone. i tried all your options like uninstalling failed updates from my update history, checking if their is any flag
    in device manager option but nothing helped me.. plz solve my problem..

    Hi,
    Could you please have a share with your phone's information?
    Based on what I know, different phones may have different softwares developed by the manufacturer to make the connection through Windows operating system, we may check with the phone's manufacturer side and see if there could be some helpful information
    offered.
    Besides, please take a check with
    Event Viewer and see if any special errors logged there.
    Best regards
    Michael Shao
    TechNet Community Support

  • Error "codepage could not be determined for the receiver-system"

    Hi,
    we use the idoc-adapter to send message from mySAP ERP to PI.
    All worked fine.
    So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
    When I start transction "we05" in mySAPERP" I get the following error:
    "codepage could not be determined for the receiver-system" status 02.
    I have changed the datatyp to "char" but the same probleme
    Can anybody help me please?
    Regards
    Stefan

    This error shouldn't occur unless there is some modification at the OS level codepages.
    Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
    Regards,
    Prateek

Maybe you are looking for

  • Can someone help me with a problem of parsing an XML file?

    Hello, I'm having some problems parsing an xml file. I get a SAXNotSupportedException when setting a property value. Here is the piece of code where I have the problem: SAXParserFactory spf = SAXParserFactory.newInstance(); spf.setNamespaceAware(true

  • How to maintain one vendor with differant plants at differant states.

    Dear All, i have one scenario with me in that my client purchasing his goods from one vendor that vendor is having two plants one at mumbai & one at gujarat. Now how i will maintain these two address with the same vendor. Along with that i need to ma

  • Muse CC won't Activate

    I have been haveing an issue with activating Abobe Muse CC.  It will not activate.  I have a Creative Cloud subscription that is up to date.  Other apps activate and open with no problem including Dreamweaver CC Photoshop CC Code Preview CC Illustrao

  • FME2 - No Audio With Logitech Pro 9000 webcam

    I have tried everyway imaginable to get Flash Media Encoder 2 to turn on the Logitech Pro 9000 webcam microphone using an Acer 2423 laptop with Windows XP Home. 1. FME2 does indeed recognize the Logitech 9000 camera and microphone as they both show u

  • Value Based user guided Navigation Using Dashboard Prompt

    Hi all Experts, I have a different dashboard pages and dashboards for each year sales and so on, like 2001,2002etc in OBIEE 11.1.1.5 answers and dashboard. My requirement is using dashboard prompt for year need to navigate to that particular dashboar