Mainstage (detuning, transpoing in error) when used with Logic 8

I have been using Logic Pro on stage for many years and have just tried to run mainstage along side Logic in a live scenario. Logic pro runs a track and then mainstage is used to play a selection of patches whilst the track is playing. Both applications work together seamlessly and mainstage easily opens the patches, the problem is mainstage is detuning the chosen patches by a semitone and therefore I have to play a semitone lower in order to play with the backing track and this gets very confusing when jumping between software and hardware sounds!
When I play with the same midi controller through a channel strip in Logic pro there are no problems, however when i jump to using mainstage there is a problem.
Has anyone else encountered this? Any fixes?
Many thanks in advance.
Cheers,
T

Similar Messages

SAML Sender-Vouches errors when using with OWSM

Hi,
We have configured OWSM Policy 'SAML - Verify WSS 1.0 Token' with Allow signed assertions only. We have created jks Trust store location and configured policy to refer to the file with appropriate password.
We have created proxy security to Sender-Voches signed and to sign outbound message.
We are getting following error when we try to run the proxy.
javax.xml.rpc.soap.SOAPFaultException: SAML token verification failed
at oracle.j2ee.ws.client.StreamingSender._raiseFault(StreamingSender.java:555)
at oracle.j2ee.ws.client.StreamingSender._sendImpl(StreamingSender.java:396)
at oracle.j2ee.ws.client.StreamingSender._send(StreamingSender.java:112)
at vigni4.oracle.srtutorial.datamodel.proxy.runtime.TimeServiceSoap_Stub.getTime(TimeServiceSoap_Stub.java:79)
at vigni4.oracle.srtutorial.datamodel.proxy.TimeServiceSoapClient.getTime(TimeServiceSoapClient.java:41)
at vigni4.oracle.srtutorial.datamodel.proxy.TimeServiceSoapClient.main(TimeServiceSoapClient.java:29)
Process exited with exit code 0.
and Error in gateway.log is
2007-09-01 18:58:56,561 WARNING [RMICallHandler-58] saml.VerifySAMLStep - SAML Token verification failed:
Can any provide information on how to resolve the issue?

We have also noticed that correct message is reaching OWSM.
Attaching the same.
<?xml version="1.0" encoding="UTF-8" ?>
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="urn:Test:GetTime">
- <env:Header>
- <wsse:Security env:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<wsse:BinarySecurityToken ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" EncodingType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#Base64Binary" wsu:Id="_FNfXFOVi1OcPKSyRUAHDyw22" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">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</wsse:BinarySecurityToken>
- <dsig:Signature xmlns="http://www.w3.org/2000/09/xmldsig#" xmlns:dsig="http://www.w3.org/2000/09/xmldsig#">
- <dsig:SignedInfo>
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
<dsig:SignatureMethod Algorithm="http://www.w3.org/2000/09/xmldsig#rsa-sha1" />
- <dsig:Reference URI="#mvDwzM5hZWAdG6n5tKLufA22">
- <dsig:Transforms>
<dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />
<dsig:DigestValue>zBFquf+Y0ngNapyK4Xq0Jws1FPM=</dsig:DigestValue>
</dsig:Reference>
- <dsig:Reference URI="#nwWnNm69TPcdyp0yT8fa7g22">
- <dsig:Transforms>
- <dsig:Transform Algorithm="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-soap-message-security-1.0#STR-Transform">
- <wsse:TransformationParameters xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<dsig:CanonicalizationMethod Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</wsse:TransformationParameters>
</dsig:Transform>
<dsig:Transform Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#" />
</dsig:Transforms>
<dsig:DigestMethod Algorithm="http://www.w3.org/2000/09/xmldsig#sha1" />
<dsig:DigestValue>rgHU/BWcaOiwuP/Q72oybFcEQO8=</dsig:DigestValue>
</dsig:Reference>
</dsig:SignedInfo>
<dsig:SignatureValue>R+RGFjzRYpGVPGINbzsFbXSQ7Slc04/mzQ+BX57oD7NhMKxCcO1C9cV2cJzWAeN5WuDlfsh3RZR/5sTsyEi3yO69ECcLUNDlbjey57GBr5W9PRRIWPs2fZVk2EH4+KOnXVghcAsrXPgm1Ai9UZQUXh0aPiOkQMDplnnhENTkKUo=</dsig:SignatureValue>
- <dsig:KeyInfo>
- <wsse:SecurityTokenReference xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:Reference URI="#_FNfXFOVi1OcPKSyRUAHDyw22" ValueType="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-x509-token-profile-1.0#X509v3" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" />
</wsse:SecurityTokenReference>
</dsig:KeyInfo>
</dsig:Signature>
- <wsse:SecurityTokenReference wsu:Id="nwWnNm69TPcdyp0yT8fa7g22" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:KeyIdentifier ValueType="http://docs.oasis-open.org/wss/oasis-wss-saml-token-profile-1.0#SAMLAssertionID" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">YFfqXnq2xlt426HB9uDInw22</wsse:KeyIdentifier>
</wsse:SecurityTokenReference>
- <saml:Assertion MajorVersion="1" MinorVersion="1" AssertionID="YFfqXnq2xlt426HB9uDInw22" IssueInstant="2007-09-01T13:40:06Z" Issuer="https://phaos.com/idp" xmlns="urn:oasis:names:tc:SAML:1.0:assertion" xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion">
<saml:Conditions NotBefore="2007-09-01T13:40:06Z" NotOnOrAfter="2007-09-02T13:40:06Z" />
- <saml:AuthenticationStatement AuthenticationInstant="2007-09-01T13:40:06Z" AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:password">
- <saml:Subject>
<saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">oc4jadmin</saml:NameIdentifier>
- <saml:SubjectConfirmation>
<saml:ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:sender-vouches</saml:ConfirmationMethod>
</saml:SubjectConfirmation>
</saml:Subject>
</saml:AuthenticationStatement>
</saml:Assertion>
</wsse:Security>
</env:Header>
- <env:Body wsu:Id="mvDwzM5hZWAdG6n5tKLufA22" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
- <ns0:getTime env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<format xsi:type="xsd:string" />
</ns0:getTime>
</env:Body>
</env:Envelope>

AppleScript Error when use with VisualHub

Hi all,
When i try to convert any movie with audio on VisualHub, then will show up these:
sh: -c: line 1: unexpected EOF while looking for matching
sh: -c: line 2: syntax error: unexpected end of file (2)
Pls help or how can i fix it?
Many Many Thanks
morningpanda

And your AppleScript code looks like ? ...
**The Applescript error**
**sh: -c: line 1: unexpected EOF while looking for matching**
**sh: -c: line 2: syntax error: unexpected end of file (2)**
And the format of the movie file (to be converted) is ? ...
*quicktime to mp4*

OLE object error when using with Access 2003 and Adobe Reader X

I link to .pdf files in Access 2003 and since upgrading to Adobe Reader X yesterday, am unable to link to these files. I receive an error stating "A problem occurred while accessing the OLE object". It goes on to tell me to verify that the file is where I say it is and that it is accessible, which it is. I can go to that file in Adobe Reader and open it.

Disable the protection mode in the preferences of Adobe Reader.

Error when working with TableView using JCA

Hi sdns,
I am getting an iview rutnime error when working with Tableview using JCA. Here i am putting all my code, go thorugh it and tell me if any error is there.One more thing is Usermappping and all properties are set to system object.
Now you can throught he code which is followed by error also.
Java file.
public class DisplayComponent extends PageProcessorComponent {
 public DynPage getPage() {
 return new DisplayComponentDynPage();
 public static class DisplayComponentDynPage extends JSPDynPage {
 private JCATviewBean bean;
 public void doInitialization() {
 IPortalComponentProfile profile =
 ((IPortalComponentRequest) getRequest())
 .getComponentContext()
 .getProfile();
 Object o = profile.getValue("myBean");
 if (o == null || !(o instanceof JCATviewBean)) {
 bean = new JCATviewBean();
 profile.putValue("myBean", bean);
 } else {
 bean = (JCATviewBean) o;
 // fill your bean with data here...
 IPortalComponentRequest request =
 (IPortalComponentRequest) this.getRequest();
 doJca(request);
 public void doProcessAfterInput() throws PageException {
 public void doProcessBeforeOutput() throws PageException {
 this.setJspName("Report.jsp");
 private IConnection getConnection(
 IPortalComponentRequest request,
 String alias)
 throws Exception {
 IConnectorGatewayService cgService =
 (IConnectorGatewayService) PortalRuntime
 .getRuntimeResources()
 .getService(
 IConnectorService.KEY);
 ConnectionProperties prop =
 new ConnectionProperties(
 request.getLocale(),
 request.getUser());
 return cgService.getConnection(alias, prop);
 public void doJca(IPortalComponentRequest request) {
 IConnectionFactory connectionFactory = null;
 IConnection client = null;
 String rfm_name = "BAPI_COMPANYCODE_GETLIST";
 try {
 try {
 // pass the request & system alias
 // Change the alias to whatever the alias is for your R/3 system
 client = getConnection(request, "MyIDES");
 } catch (Exception e) {
 System.out.println(
 "Couldn't establish a connection with a target system.");
 return;
Start Interaction
 IInteraction interaction = client.createInteractionEx();
 IInteractionSpec interactionSpec =
 interaction.getInteractionSpec();
 interactionSpec.setPropertyValue("Name", rfm_name);
CCI api only has one datatype: Record
 RecordFactory recordFactory = interaction.getRecordFactory();
 MappedRecord importParams =
 recordFactory.createMappedRecord(
 "CONTAINER_OF_IMPORT_PARAMS");
 IFunctionsMetaData functionsMetaData =
 client.getFunctionsMetaData();
 IFunction function = functionsMetaData.getFunction(rfm_name);
 if (function == null) {
 System.out.println(
 "Couldn't find " + rfm_name + " in a target system.");
 return;
How to invoke Function modules
 System.out.println("Invoking... " + function.getName());
 MappedRecord exportParams =
 (MappedRecord) interaction.execute(
 interactionSpec,
 importParams);
How to get structure values
 IRecord exportStructure = (IRecord) exportParams.get("RETURN");
 String columnOne = exportStructure.getString("TYPE");
 String columnTwo = exportStructure.getString("CODE");
 String columnThree = exportStructure.getString("MESSAGE");
 System.out.println(" RETURN-TYPE = " + columnOne);
 System.out.println(" RETURN-CODE = " + columnTwo);
 System.out.println(" RETURN-MESSAGE =" + columnThree);
How to get table values
 IRecordSet exportTable =
 (IRecordSet) exportParams.get("COMPANYCODE_LIST");
 exportTable.beforeFirst();
 // Moves the cursor before the first row.
 while (exportTable.next()) {
 String column_1 = exportTable.getString("COMP_CODE");
 String column_2 = exportTable.getString("COMP_NAME");
 System.out.println(
 " COMPANYCODE_LIST-COMP_CODE = " + column_1);
 System.out.println(
 " COMPANYCODE_LIST-COMP_NAME = " + column_2);
 // create the tableview mode in the bean
 bean.createData(exportTable);
Closing the connection
 client.close();
 } catch (ConnectorException e) {
 // app.putValue("error", e);
 System.out.println("Caught an exception: \n" + e);
 } catch (Exception e) {
 System.out.println("Caught an exception: \n" + e);
Bena file
package com.sap.JCA.bean;
import java.util.Vector;
import com.sapportals.connector.execution.structures.IRecordSet;
import com.sapportals.htmlb.table.DefaultTableViewModel;
import com.sapportals.htmlb.table.TableViewModel;
public class JCATviewBean {
 public DefaultTableViewModel model;
 public TableViewModel getModel() {
 return this.model;
 public void setModel(DefaultTableViewModel model) {
 this.model = model;
 public void createData(IRecordSet table) {
// this is your column names
 Vector column = new Vector();
 column.addElement("Company Code");
 column.addElement("Company Name");
// all this logic is for the data part.
 Vector rVector = new Vector();
 try {
 table.beforeFirst();
 while (table.next()) {
 Vector data = new Vector();
 data.addElement(table.getString("COMP_CODE"));
 data.addElement(table.getString("COMP_NAME"));
 rVector.addElement(data);
 } catch (Exception e) {
 e.printStackTrace();
// this is where you create the model
 this.setModel(new DefaultTableViewModel(rVector, column));
JSP File:
<%@ taglib uri="tagLib" prefix="hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.sap.JCA.bean.JCATviewBean" />
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
 <hbj:form id="myFormId" >
 
 <hbj:textView id = "tv1" text = "TableView Example Using JCA "/>
<hbj:tableView
 id="myTableView1"
 model="myBean.model"
 design="ALTERNATING"
 headerVisible="true"
 footerVisible="true"
 fillUpEmptyRows="true"
 navigationMode="BYLINE"
 selectionMode="MULTISELECT"
 headerText="TableView example1"
 visibleFirstRow="1"
 visibleRowCount="30"
 width="500 px"
 />
 </hbj:form>
</hbj:page>
</hbj:content>
Error when Executing this component:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/portal/htmlb/page/PageProcessorComponent.
Exception id: 12:21_28/10/05_0173_94105150
See the details for the exception ID in the log file
If anybody find the error please reply to this post.
Regards,
sireesha.

Thanks for your response Martin,
I have already seen the log file but im couldn't findout anything from that since it is so long here im putting some part of please see this.if u able to find it clarify me,
Here the log file:
1.5#001321FD6213005D0000907100001CB000040419258FBF4E#1130405957843#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907200001CB00004041925916735#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907300001CB0000404192591688D#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120E00001CB00004041925C953D7#1130405961625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907400001CB000040419275B24FC#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907500001CB000040419275B25D9#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907600001CB000040419275B2E27#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907700001CB000040419275B2EFA#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD6213005D0000907800001CB0000404192924ED59#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907900001CB0000404192924EE36#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907A00001CB0000404192924F652#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907B00001CB0000404192924F710#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120F00001CB000040419295CCD8B#1130406021625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907C00001CB0000404192AEEB1E2#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907D00001CB0000404192AEEB2C0#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907E00001CB0000404192AEEBAD8#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907F00001CB0000404192AEEBB9E#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#

Photoshop CS4 "Program Error" when using Text tool

Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
Thanks

Thats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks

Error when using PPR in the OA page developed.

HI,
We are encountering an error when using PPR for the custom OA page being developed. I am using JDeveloper version 9.0.3.5(Build 1437) and Oracle Applications version 11.5.10.CU2. The scenario we are using PPR and the steps to reproduce the issue is mentioned below,
Scenario:
1) PPR is enabled for a custom OA page that is developed.
2) The PPR is being used to enable or disable a particular field based on the
selection of a value in a poplist in the same OA Page.
Error replication steps:
1) The user enters a value in the primary mandatory field which has to have
unique value.
2) The user selects a value from the poplist of a field which has PPR associated.
3) The user enters data in all other mandatory fields in the OA page except one
and tries to save the form and is shown a error message saying that all
mandatory fields are not entered(This is correct). Now the page gets
automatically refreshed and so the entered values are wiped off.
4) Now if the user again enters a value in the primary mandatory field (as in
step1) and if that value happens to be already existing value and then select
a value from the poplist which has PPR enabled then immediately the error
"Please enter a unique value" is entered, though we did not save the record.
The unique record validation would happen only at the time of saving the
record as per out business logic.
5) But if in Step 4 if i had entered a unique value again then the above said error
does not happen. There are few more similar kind of issues happening in the
same page because PPR is enabled.
Please note that this issue happens only when the page is deployed in a oracle
applications instance and not in JDeveloper.
Would this issue because of some cacheing problem? If Yes then how do we resolve it? Or would it be some other problem caused by our internal coding.
Any inputs for resolving this issue would be highly appreciated.
Thanks, Raja.

What works in Jdeveloper should work when deployed in iAS as well.
And PPR is an old feature given quite enough time to mature, so before we suspect OA we should investigate the code. What I do not understand is how the page refreshes in Step 3 and why does the user have to re-enter the fields just because he missed entering one mandatory field the last time.
Mandatory field validations are client validations set by making the fields 'Required'. You obviously have client validations turned off on your PPR, otherwise you would be stuck with a javascript popup on PPR. The only way you can get the "Please enter unique..." error on PPR is Server Validation. So where have you placed this validation? If it is not in the EO, is it in the AM? And are you unconditionally calling the AM validation method in your processFormRequest? The PPR will also go through processFormRequest so I hope the PPR event is in a different if-else block.

Java Heap Error when using Stateless Session Timer Bean deployed in Oracle

Hi,
Am getting following Java Heap Error when using Stateless Session Timer Bean deployed in Oracle 10g AS R3 (Oracle Containers for J2EE 10g (10.1.3.0.0) (build 060119.1546.05277) ):
06/08/02 14:58:43 javax.ejb.EJBException: java.lang.OutOfMemoryError: Java heap space
06/08/02 14:58:43 at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:304)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:67)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:45)
06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:86)
06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:71)
06/08/02 14:58:43 at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1624)
06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:92)
06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:184)
06/08/02 14:58:43 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
06/08/02 14:58:43 at java.lang.Thread.run(Thread.java:595)
06/08/02 14:58:43 Caused by: java.lang.OutOfMemoryError: Java heap space
I had tried using -Xms / -Xmx options (upto 1 GB).
The trace of exception gets delayed (from being displayed on the console) as the memory size is increased; but after sometime it starts getting displayed on the console.
Even though this exception is displayed on the console, the Timer Bean continues to execute upto sometime before it finally crashes!
If anyone has encountered such problem; would appreciate if you could share the solution.
Regards, Vidyadhar

Hi guys, I have the same problem. I have an application EAR file with two modules (EJB and WAR starting in this order). The application can schedule a process via EJB timer. In this case restarting the server I receive the error above. If I change the modules start order --> WAR - EJB the server start correctly, but the application scheduler fails (the persistency is not working) with this error:
07/10/09 10:30:54 FINISSIMO: TimerTask.runBeanTimer java.lang.NullPointerException; nested exception is: java.lang.NullPointerExceptionjavax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
java.lang.NullPointerException
     at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
     at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
     at java.util.ResourceBundle.getString(ResourceBundle.java:285)
     at java.util.logging.Formatter.formatMessage(Formatter.java:108)
     at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
     at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
     at java.util.logging.Logger.log(Logger.java:428)
     at java.util.logging.Logger.doLog(Logger.java:450)
     at java.util.logging.Logger.log(Logger.java:539)
     at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
     at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
     at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
     at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
     at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
     at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
     at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
     at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
javax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
     at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:309)
     at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:73)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:55)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
     at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
     at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
     at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
     at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
     at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.NullPointerException
     at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
     at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
     at java.util.ResourceBundle.getString(ResourceBundle.java:285)
     at java.util.logging.Formatter.formatMessage(Formatter.java:108)
     at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
     at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
     at java.util.logging.Logger.log(Logger.java:428)
     at java.util.logging.Logger.doLog(Logger.java:450)
     at java.util.logging.Logger.log(Logger.java:539)
     at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
     at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
     at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
     at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
     at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
     at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
     at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
     at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
     ... 9 more
Any idea?
Thx Auro

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

UDESEncrypt Errors when using the JAVA engine (NW IDM 7.0)

Folks,
I'm seeing an error when I use the uDESEncrypt function with the Java Engine in NW IDM SP2 Patch 3.
The error I am getting is:
runFunctionsInString($FUNCTION.encrPWD()$$) got exception
org.mozilla.javascript.EvaluatorException: uDESEncrypt: Key should be exactly 24 bytes long.
The code calling it is:
// Main function: encrPWD
function encrPWD(Par){
     //Example calling DSE internal function
     //UserFunc.uStop("Terminated by user");
     key = "C:\Program Files\SAP\IdM\Workflow\configs\KEY\keys.ini";
     OutString = UserFunc.uDESEncrypt(key, Par);
     return OutString;
I have also seen this error when using Patch 4.
Interestingly enough, the error does not occur when using the Windows Engine. Anyone else seeing this?
Thanks,
Matt

Hi Matthew,
Try to replace the '\' with '
key = "C:
Program Files
SAP
IdM
Workflow
configs
KEY
keys.ini";
Alternative approaches,
1) setting key empty and it will look into %DSE_HOME%\KEY\key.ini
which should be C:\Program Files\SAP\IdM\Identity Center\Key\key.ini on default installation path.
2) or setting the key to something like = 6D5A2AF59B1CDD7F9592484F178331C891537A3F9B91D362
   a 24 byte key...
Also when using DES you should ensure that in Identity Center underneath Options/General
you have encryption algorithm set to 3DES.
Normally if you intend to use this for password provisioning in IC you would also
on the identity store (for instance 'Enterprise people') underneath 'password policy' check
of for 'enable password provisioning.'
By doing so the MX_ENCRYPTED_PASSWORD with be set when operating through
workflow (3DES encryption version of the MX_PASSWORD) which allows you to obtain password
when provisioning to other target systems...

Errors when using source2wsdd

Any help will be greatly appreciated.
I got the following errors when using the ant task source2wsdd:
[source2wsdd] classpath C:\bea\weblogic81\server\lib\weblogic.jar;C:\bea\weblogi
c81\server\lib\webservices.jar
[source2wsdd] source2wsdd: Cannot find doclet class weblogic.webservice.tools.dd
gen.ServiceGen
[source2wsdd] 1 error
[ant] Exiting C:\project\DCII\ant\batch-build.xml.
BUILD FAILED
C:\project\ant\build.xml:67: The following error occurred while executing this l
ine:
C:\project\DCII\ant\batch-build.xml:326: javadoc execution failed
at org.apache.tools.ant.ProjectHelper.addLocationToBuildException(Projec
tHelper.java:539)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:388)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.Main.runBuild(Main.java:673)
at org.apache.tools.ant.Main.startAnt(Main.java:188)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:196)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:55)
Caused by: C:\project\DCII\ant\batch-build.xml:326: javadoc execution failed
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.runJavadoc(J
avaSource2DD.java:297)
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.execute(Java
Source2DD.java:150)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at ise.antelope.tasks.Call.execute(Call.java:17)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at ise.antelope.tasks.IfTask.doIf(IfTask.java:298)
at ise.antelope.tasks.IfTask.execute(IfTask.java:267)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:386)
... 10 more
--- Nested Exception ---
C:\project\DCII\ant\batch-build.xml:326: javadoc execution failed
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.runJavadoc(J
avaSource2DD.java:297)
at weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD.execute(Java
Source2DD.java:150)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at ise.antelope.tasks.Call.execute(Call.java:17)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at ise.antelope.tasks.IfTask.doIf(IfTask.java:298)
at ise.antelope.tasks.IfTask.execute(IfTask.java:267)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:386)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
at org.apache.tools.ant.Project.executeTargets(Project.java:1062)
at org.apache.tools.ant.Main.runBuild(Main.java:673)
at org.apache.tools.ant.Main.startAnt(Main.java:188)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:196)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:55)
Total time: 8 seconds
The following is the major parts from my ant build file:
<path id="webservice.classpath">
<pathelement location="${wls.home.dir}/server/lib/weblogic.jar"/>
<pathelement location="${wls.home.dir}/server/lib/webservices.jar"/>
</path>
<target name = "initialize">
<mkdir dir="${build.dir}"/>
<mkdir dir="${class.dir}"/>
<mkdir dir="${dist.dir}/${deploy.env}"/>
<mkdir dir="${jdocs.dir}"/>
<mkdir dir="${weblogic.application.dir}"/>
<taskdef name="call"
classpathref="antelope.classpath"
classname="ise.antelope.tasks.Call"/>
<taskdef name="if"
classpathref="antelope.classpath"
classname="ise.antelope.tasks.IfTask"/>
<taskdef name="servicegen"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask"/>
<taskdef name="clientgen"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.webservices.clientgen.ClientGenTask"/>
<taskdef name="source2wsdd"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.webservices.autotype.JavaSource2DD"/>
<taskdef name="wldeploy"
classpathref="webservice.classpath"
classname="weblogic.ant.taskdefs.management.WLDeploy"/>
</target>
<target name="buildEar"
depends="buildCommonJar, ejbc">
<echo message ="[${module.name}] Checking to see if ${ear.file} is up to date...[${appc.classpath}]" />
<source2wsdd
javaSource="${webserviceServer_src_dir}/HelloWorld.java"
ddFile="${descriptor.dir}/webservice/web-services.xml"
serviceUri="/HelloWorld">
<classpath refid="webservice.classpath" />
</source2wsdd>
<echo message ="[Done with buildEar]" />
</target>

Did you ever resolve this?

Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

I'm trying to migrate a Sql Server 2k database to an Oracle 8i schema using OMWB. After using BCP to collect metadata information on the source database, I tried to capture the source data model and got a "Capture aborted" message on the progress screen (even though then it appears a dialog window reporting "0 errors and 0 warnings", funny!). Down there is the error log OMWB generated. After reading some posts, I changed some columns of the OMWB dictionary that holds the source database name, but still got the same error. If someone can enlighten me on this toppic, I'd greatly appreciated it.
Here's the error log of OMWB:
** Oracle Migration Workbench
** Production
** ( Build 20050629 )
** OMWB_HOME: D:\Datos\Download\Oracle\Oracle Migration Workbench\omwb
** user language: es
** user region: null
** user timezone:
** file encoding: Cp1252
** java version: 1.4.2_04
** java vendor: Sun Microsystems Inc.
** o.s. arch: x86
** o.s. name: Windows 2000
** o.s. version: 5.0
** Classpath:
..\lib\boot.jar
** Started : Fri Feb 23 17:18:48 GMT-03:00 2007
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.6.0.0 - Production
With the Partitioning option
JServer Release 8.1.6.0.0 - Production
Repository Connection URL: jdbc:oracle:thin:@ServerCms:1521:sigcewbc
** The following plugins are installed:
** Microsoft Access 2.0/95/97/2000/2002/2003 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 2000 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 6.5 Plugin, Production Release 10.1.0.4.0
** Microsoft SQLServer 7.0 Plugin, Production Release 10.1.0.4.0
** Active Plugin : SQLServer2K
EXCEPTION :SQLServer2KDisconnSourceModelLoad.loadSourceModel(): oracle.mtg.migration.MigrationStopException: java.lang.IndexOutOfBoundsException: Index: 15, Size: 15
** Shutdown : Fri Feb 23 18:00:50 GMT-03:00 2007

Duplicate thread
Error when using Oracle Migration WorkBench (Sql Server 2k to Oracle 8i)

RPC Server not Available error when using Windows Fax & Scan under Windows 7

RPC Server not Available error when using Windows Fax & Scan under Windows 7

Hi,
On current situation, please remove the old fax account and re-add a new fax account in Windows Fax and Scan, then check if this issue sill exist. For more details, please refer to following similar thread and artilces.
RPC Server not Available error when using Windows Fax & Scan
under Windows
The local fax account is inaccessible after you rename a Windows Vista-based computer
Cannot send fax from Windows Vista/Windows 7 PC with “RPC Server not Available” error message
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
If any update, please feel free to let me know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Pragma error when compiling with SDK X

Hi,
I am trying to compile my plugin application (which compiled fine with the previous sdk) using the SDK X, but receive errors in CAVAlert.h on the exception handler construct DURING, HANDLER, END_HANDLER.
The errors are listed here:
Headers/API/CAVAlert.h:156:3: error: 'suppress' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: 'warning' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: '__pragma' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'jmp_buf'
Headers/API/CAVAlert.h:156:3: error: 'ASException' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'struct'
Headers/API/CAVAlert.h:162:3: error: request for member 'E_RETURNOutsideDURINGBlock' in 'gBadReturnCatcher', which is of non-class type 'int'
Headers/API/CAVAlert.h:162:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:162:3: error: expected ';' before 'int'
Headers/API/CAVAlert.h:165:3: error: 'ENDHANDLEROutsideHANDLER' was not declared in this scope
To compile against to SDK X all I did was:
1) Used PIMain.c from the SDK X API directory.
2) Changed ACRO_SDK_LEVEL=0x00090000 => ACRO_SDK_LEVEL=0x000A0000
3) Changed the include directories to point to the new SDK X directories
Is there another directive I must add to get the plugin to compile with SDK X?
My preprocessor list is as follows:
ACRO_SDK_LEVEL=0x000A0000
HAVE_W32API_H
PDMETADATA_HFT=1
PLUGIN=1
WIN32
WIN_ENV
WIN_PLATFORM
WXUSINGDLL
_CRT_SECURE_NO_DEPRECATE
_DEBUG
_WINDOWS
__GNUWIN32__
__WIN32__
__WXMSW__
Thank you,
Magda

Without seeing your code, I can't really help.
If you want help with your code, open a formal support ticket.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 6 Dec 2011 04:09:25 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Pragma error when compiling with SDK X
Pragma error when compiling with SDK X
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4066378#4066378

Weblogic 9.2 error when using spring framework and taglibs.

I am getting the following error when using spring binding for a command form class.
Class ExCommandForm
private String firmCode;
public String getFirmCode ()
public void setFirmCode ()
In my jsp I have the following
<spring:bind path="exCommandForm.firmCode">
<input name="<c:out value="${status.expression}"/>" type="text" value="<c:out value="${status.value}"/>" >
</spring:bind>
Ps. exCommandForm is the commandForm declaration in my SiimpleFormController.
When I deploy the application to weblogic 9.2 I get the following error :
<Apr 26, 2007 4:34:44 PM BST> <Error> <HTTP> <BEA-101017> <[weblogic.servlet.int
ernal.WebAppServletContext@1f601c6 - appName: 'BDRui', name: 'BDRui', context-pa
th: '/BDRui'] Root cause of ServletException.
java.lang.ClassCastException: javax.servlet.jsp.jstl.core.LoopTagSupport$1Status
at jsp_servlet._web_45_inf._jsp.__tradesearch._jspService(__tradesearch.
java:1075)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run
(StubSecurityHelper.java:225)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecuri
tyHelper.java:127)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.jav
a:283)
Ps. Deploying application on Tomcat 5.23 works.
Can anyone help on this ?
cheers in advance.
More Info - Using Weblogic 9.2 on UNIX, servlet 2.4, jstl 1.1
regards
Edited by kings_citi at 04/26/2007 9:03 AM
Edited by kings_citi at 04/26/2007 10:35 AM
Edited by kings_citi at 04/26/2007 10:36 AM

The problem doesn't look like it has anything to do with wappers per se. The stack indicates that the JVM died when the persistent store tried to invoke a standard Java synchronize operation. JVM crashes need to be analyzed by a JVM expert, so I second the suggestion to solicit help from JVM experts and/or filing a case with customer support. In the mean-time, you can probably work-around the issue by either (A) ensuring you have a recent version of the JVM installed, or (B) temporarily switching to the Sun JVM.
Regards,
tom
Edited by: TomB on Sep 17, 2010 2:33 PM

Mainstage (detuning, transpoing in error) when used with Logic 8

Similar Messages

Maybe you are looking for