Maintaining attributes in PPOMA_BBP

HI ALL,
i newly installed my PC SRM5.0 with ECC6.0. i am assigining the attributes in root org level.but iam unable to see that assigned attributes in *overview tab,*also in inheritence tab. what is the problem.
please tell me the solution for this issue asap.points would b rewarded.
thanks&regards
rakhi
Edited by: Rakhi on Jul 30, 2008 9:12 AM

HI ,
Where can i see that role pertaining to that attributes. my question is when i was assigning the attributes for root org under attribute tab i could not see the assigned attributes in the overview tab.so please suggest me on this issue.
thanks&regards
Rakhi

Similar Messages

  • Help with custom attributes in PPOMA_BBP

    Hello,
    I have added a custom cost center attribute in PPOMA_BBP. I basically a copied existing attribute CNT (cost center).  I created a data element and added it to BBP_ATTR_F1. I used OOATTRCUST to add the attribute and made an entry in BBP_ATTR_PROP using SE16. Also, I copied function module BBP_ATTR_F4_ACC and revised for created a custom help module.
    The search help works fine in PPOMA_BBP but the selected value is brought back, the value is initally placed the field next to the source system field. However, after a second or two the source system is placed in the custom attribute field and the source system field is blanked out.  The same thing happens when maintaining the value manually without using search help. 
    Is there something I missed?
    Regards, Dean.

    Hi
    Which SRM version are you using ?
    <b>Please see the SAP OSS Note -></b>
    Note 791465 - PPOMA_BBP:Incorrect search help in back-end for WBS elements
    Note 614875 EBP 3.5/4.0: Alpha conversion of the System ID (PPOMA_BBP) 
    Note 387012 Maintainance of customer attributes
    Note 217574 Maintain attribute material group (WGR, RESP_WGR)
    Re: Creating new user attribute
    <u>Other SAP Notes / related links -></u>
    Note 879030 Missing attribute BUK in report BBP_ATTR_TEXT_REFRESH
    Note 580769 EBP 3.+: Database error when saving attributes
    Note 511365 EBP 3.5: Incorrect default values for PRCAT
    Note 544159 EBP 3.+: Backend attributes - no synchronization of texts
    Note 545365 EBP 3.+: Refresh of the attribute texts in BBP_ATTR_VALUE_T
    Note 508710 EBP 3.5: Default backend-specific attributes are not read
    Note 379139 Performance when reading attributes
    Note 445401 BBPOR01: Attributes are read incorrectly (PM_VAWRK)
    Note 393290 BBPOR01: Attributes are read incorrectly
    Hope this will answer all your queries.
    Do let me know.
    Regards
    - Atul

  • Maintain attribute order in XML with a structure?

    I'm using xmlParse() to read an XML file into a structure, and then process the structure (replace some of the XML attributes) and then write the structure back out as an XML file. The problem is that I loose the original ordering of XML attrbutes when I convert to a structure, and instead end up with a new attribute order for each element that is alphabetical.
    In otherwords: <element c="text" d="text" a="text" />
    gets rewritten as: <element a="text" c="text" d="text" />
    which is a problem for this application.
    Is there a way to work with XML in CF but maintain attribute ordering (LinkedHashMap instead of a structure, maybe)?
    Thanks.
    Walter

    but using ColdFusion to process XML in this way is making a pretty big change in the XML structure.
    No, it's not changing the structure in any meaningful way: the attribute ordering isn't meaningful in XML, so if the order of them changes, then that's not a meaningful change.  In any way that XML should be used, it doesn't matter.
    When CF reads an string (like file contents) and parses it as XML, it needs to create an XML object; that XML object will adhere to the rules of XML; one of which is "atribute order has no significance", so it will not (and ought not) bother to "remember" the order that the attributes were in in the original string.  When one converts that object back into a string, some sort of ordering needs to be used to write them back, and CF seems to arbitrarily use alphabetical order.  But it cannot refer back to information that it doesn't have (the original ordering), so the original ordering can't be preserved.
    There's nothing unreasonable or that shouldn't be expected in this process, unfortunately (for you, I mean).
    Adam

  • Maintaining attributes, data source and attribute list in web UI

    Hi
    Can we maintain attributes, data source and attribute list in web UI level. We can do it  in SAP GUI level but do we have the option of doing it on web  UI level??
    Regards
    Aakshi

    HI
    data sources and Attribute lists need to be maintained in GUI but these can further be used for Segmentation in Web UI using the Graphical Modeler.
    hey main thing is that when we design all the things our out put is reflected in both interface & most important thing is that 90% of our customization done in gui.only web_ui related customization done in web_ui.
    for more details revert me back
    debi prasad

  • Maintaining attributes, data source and attribute list in web UI level.

    Hi
    Can we maintain attributes, data source and attribute list in web UI level. We can do it  in SAP GUI level but do we have the option of doing it on web  UI level??
    Regards
    Aakshi

    Hi Aakshi,
    As far as I know,data sources and Attribute lists need to be maintained in GUI but these can further be used for Segmentation in Web UI using the Graphical Modeler.
    If you need more assistance please do revert.
    Regards
    Varun Taneja

  • Problem in  maintain attributes for position in maintain user attributes

    Hi All ,
    I am facing a problem in Maintain User Attributes
    I should get only 5 values for any user in attributes dropdown of attributes for position
    But for some users I am getting as 10 values
    and for some users I am getting it as 20 values ..
    What my doubt is
    will it be based on role dependency or anyother one ..
    Pls let me know if u have any idea ..
    Thanks
    Kumar

    Hello,
    The ability of changing attributes via User settings depends on the role
    assigned to the user and whether this role has the appropriate rights to
    change the attributes.
    In this regard, check the customizing below:
    SRM -> SRM Server -> Cross Application Basic Settings -> Roles ->
    Maintain Attribute Access Rights by Role.
    Here you define which parameter can be changed depending on the role
    assigned to user in question.
    Regards,
    Ricardo

  • Where to maintain Attribute of the results record (Valid, Invalid,....)

    Dear Guru
    Where to maintain Attribute of the results record (Valid, Invalid,....)
    <  The true value is less or equal to; valid  result
    >  The true value is greater or equal to; valid  result
    my requrement is when i record the result system shows <=  value is less or equal to in specification (e.g. <= 5.0%), but client requirement is only "< value is less" (e.g. < 5.0%)to be display.
    Please help.
    Thanks in advance
    Yuvraj Dhotre....

    Hi then based on the no of decimal places you can define the limit like for decimal places 3 your upper limit will be 4.999
    And if it is lower limit the it is 5.001
    regards,
    Smruti

  • Maintain attribute dimensions in Hyperion Planning, via ODI

    How can I move/maintain attribute members in Hyperion Planning, preferably via ODI?
    I have been loading an attribute dimension into Hyperion Planning, via ODI. The problem is that some children have been previously loaded to incorrect parents. However, a reload does not seem to move the children to their rightful place in the hierarchy.
    There are no errors being generated.
    Cheers

    Are you definitely sure it is not on the planning side the issue lies, I would create a file and then use the outline loader to compare load times to see where the issue is first.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Maintain attributes for Approval Limit

    Hello friends,
    I am Uptaing the USER attributes for Approval Limit, APPRV_LIM.
    I am using the FM - BBP_UPDATE_ATTRIBUTES.
    I am confused how would I pass the value and the format.
    I am passing 123 USD, Its Updating but when I see in T-CODE, pposa_bbp, I see some diffrent value being uploaded.
    I mean 123 is converted to 31003200330.02
    Any Idea as whats the issue and how should I handle this
    Ster.

    Hi
    What is the input file format you used?
    and check any currency definition in CUR (currency) attribute in PPOMA_BBP.
    BR
    Muthu

  • While creating fm for maintaining variant , how to maintain attributes

    I am creating one fm to maintain variant for one report program . I am using the standard fm RS_CREATE_VARIANT for maintaing the values , but for attributes which i need for one parameter which is date selection , i want to use that dynamic date calculations available in the attribute screen of the variant , but instead of maually setting that date attribute , how to store that values in my fm .
    there is one satndard  fm RS_VARIANT_ATTR_SAVE ,during  execution of this  fm variant attributes maintain screen is coming where manully one has to save attributes maintained by that fm .
    so, due to this user interraction for saving that fm i can not use this .
    If there is any other fm or any alternate then please reply

    Hi Hari,
    On set type maintenance screen (Txn COMM_ATTRSET), choose your set type and follow the menu path
    Set type/ Attributes -> Transport -> Set type
    On the next screen, select the set type table entry and press button 'Include in transport request'.  This should give you a pop up where $TMP is defaulted as a package which you can change with your own package type.
    That's it.
    Regards,
    Surendar

  • Maintaining attribut time dependent master data

    Hi all,
    I have a question regarding normal system behaviour while maintaining BW Attributs with dependent master data. For example, I have created an infoobject like this:
    - cod 40029, class 10 valid from 01.01.2008 until 31.12.2008
    - cod 40029, class 10 valid from 01.01.2009 until 31.12.9999
    But afterwards when I try to maintain master data and change the 2nd row (valid until the end of 2010) the system changes the requested row but also creates an extra line with same data valid until 9999
    - cod 40029, class 10 valid from 01.01.2008 until 31.12.2008
    - cod 40029, class 10 valid from 01.01.2009 until 31.12.2010
    - cod 40029, class 10 valid from 01.01.2011 until 31.12.9999 (extra line)
    Is this the standard behaviour? the fact is that with this behaviour the user allways needs to "delete" the fields cod 40029 and classe 10 to make the row "unuseful".
    Regards,
    Pedro
    Edited by: Pedro Godinho on Jun 25, 2009 1:15 PM

    Hi Pedro,
    Yes this is the standard behaviour.
    I am not sure where you are using this and why you need to make it unuseful.
    If you are using it in BPS or IP. Create one more attrbute to this master data object, this would flag the usefulness of the timeslice.
    You would then be able to filtrer to only useful timeslices in your planning/reporting.
    Dont forget to make the flag attribute as navigaitonal attribute.This will allow selection for the flag in the report or filters in IP or BPS.
    Hope this helps,
    Best regards,
    Sunmit.

  • US Position Attributes - T5U29 table and Tcode to maintain it

    Can anybody tell me what is the importance of T5U29 table and the tcode to maintain it?

    Hi Sheetal,
    You can maintain this table via SM30 view V_T5U29 and its used for assigning:
    Job Category (This field holds the code which corresponds to a particular job category. (Jobs are associated to job categories using a feature.))
    AAP Category(This field contains the AAP (Affirmative Action Planning) category to be assigned to a job)
    Occupational Classification Code(This field holds the OCC (Occupational Classification Code) which can be assigned to an EEO category.)
    Also you can classify you jobs as Exempt or Non Exempt under FLSA guidelines by checking the radio button for Exempt and Non-Exempt.
    One more thing in addition to above, generally we maintain attributes fr Job instead of Postion in table T5U13.
    Hope this will help
    guds
    Edited by: guds on May 19, 2009 6:28 PM

  • Error RSM006 "Attributes are not yet maintained"

    Hello everyone, I have had a problem with two infopackages,  one of them has the 0COORDER_TEXT datasource and the other 0COORDER_ATTR datasource. When I run the process chain with these infopackages, I have the error RSM006 "Attributes are not yet maintained", if I try to change these infopackages with the RSA1 I have the same error.
    Do you have any suggestion to solve this problem?
    Thank you very much.
    Best Regards
    Maximiliano Valin

    Thank you, I check your recommendation and I found everything ok, the 0COORDER is ok and active, and the tranfer rules are ok and active too, I don't know what other thing could be the problem.
    This is the help message that appear when the error happens.
    Attributes are not yet maintained
    Message no. RSM006
    Diagnosis
    The attributes have either not yet been created or activated.
    The data cannot be taken from the source system without maintained attributes. Therefore, this data request is not possible.
    Procedure
    Maintain the attributes for this master data-InfoSource in the Administrator Workbench and then activate them.
    Thank you for everything.

  • Attribute error while creating shopping cart in portal

    Hi,
    We are using SRM 7.0 . While creating shopping cart in portal , I am getting error " the attribute of the user are inconsistent or not defined. See transaction ppoma_bbp "
    I have maintained attributes of ACS,BSA,BUK,BWA,CUR,KNT,WGR & WRK . Done attribute check in BBP_ATTR_CHECK, it issued warning message for CAT attribute. All other attributes are Ok.
    Could anybody help to resolve this.
    Regards
    Ayyappan

    HI
    Step 1: Check the consistency of the User for Shopping Cart using Transaction BBP_CHECK_CONSISTENCY. THis will give you a snapshot of what is missing in user's attributes for creating a SC.
    Step 2. Go to PPOMA_BBP and note down the Position id and CP id of the user. Then check the consistency of these objects using BBP_BP_OM_INTEGRATE.
    It seems the combination of attributes is not in right place for this user
    Regards
    Virender Singh

  • Attribute ADDR_SHIPT Ship to address

    Hi,
    I have a problem I cannot resolve that for some of my users the Ship to address number has been maintained in the attributes in PPOMA_BBP so that the user has a default delivery address. However, no matter what we do the ship to address is not defaulting into the cart even though the address can be found via the F4 search help from the cart itself. Does anyone know why this would happen as it only happens for a few users?
    Thanks
    Andrew

    Hi Andrew
    Are they inherited the ship to adress attribute? which version of SRM 550 or 700?
    interesting..
    however display
    what is the entry for your address number.
    check boxes?
    Use Address as: 
      Standard Address 
      Ship-To Address     Copy as Default 
      Invoice Recipient Address     Copy as Default 
    Does addresses have BP number .check in adrc table too
    br
    Muhtu

Maybe you are looking for