Maintaining Price for BOM / Bom item with customer

Hi,
We are using BOM concept for SO, and price we are maintaining at item level like we have a FG material 9910 and it has BOM componenet as , A,B,C and we are maitaining price at item level for A,B, and C now I want to maitain price at with BOM and customer
BOM : 9910
Item A,B,C
BOM : 9911
ITEM: A,B,C,D
Now our requirement is to maiatin price as CUSTOMER / BOM Header material / BOM ITEM
sohow to make the condition table for my requirement, as MATNR field we can select only one time in table how to take MATNR of Header and MATNR for item.
regards,
zafar

Hi Prakash,
Thanks for your reply it is a good link which u have send, but my requirement is not solve with the given link I want to maiatin price at item level for this in Main item item category I have maiatin LUMF and alll price at item level but my requirement is I want to maiatin price at item level only but refeence to Main Item
MEANS : I Hva emain item 9910. with item , 1.2.3 and i have another main item 9911 with sub items ,1,2,3,4 in such cases I want to maiatin price for sub items 1,2,3,4 but ref. to customer and Main item
CUSTOMER / MAIN ITEM / SUB ITEM
how to mainatin price in VK11 as per above requirement.
regards,
zafar

Similar Messages

Function module for BOM item update

Hi,
Please enlightenn us, which FM is do the update for BOM item datas. ( current FM is updated line item one item then come out and log in again updating another line item , thus cause more error are facing.)
we want a FM to update one time all the line time and come out from the screen.
Thx
Sathiya

HI
You Can use function module CSAP_MAT_BOM_MAINTAIN to process simple material BOMs.
To change BOMs, you can also use the following function modules:
CSAP_MAT_BOM_OPEN
CSAP_BOM_ITEM_MAINTAIN
CSAP_MAT_BOM_CLOSE
You can use FM CSAP_ORD_BOM_MAINTAIN to Maintain Order BOM.
With Regards
Naveen

Unable to create delivery for BOM items not in stock??

Hi Experts,
We have created a sales order with Parent item and its 3 BOM items, with pricing doen at BOM items. Of the three BOM items, stock exists for only 1 item. When we are trying to create the delivery, it is bringing only the stock item in delivery overview and not the items without stock. We would like:
1. System to bring all the items while creating delivery. It may not permit picking and PGI till the stock is brought in system.
2. System to not allow creating delivery till stock exists for all the required items.
For the non-stock items, system is not allowing to carry out the availability check also. It can give a future date and confirm the quantity for future delivery!!
Please provide your expert opinions asap. Points would be awarded to all helpful answers.
Regards,
Peeyoosh.

Hi Peeyoosh,
had you a look at the customizing of your item categories for delivery? Did you use the standard item category TAN? Perhaps the customizing of "availabilty check for delivery item" and "Check quantity 0" in your category for delivery will bring you forward.
Regards Thomas

Special procurement type for BOM item

Hi Experts
I am creating BOM using BAPI : CAD_CREATE_BOM_WITH_SUB_ITEMS
There is no field to update Special procurement type for BOM item in this BAPI.
Could you please suggest some way to update this.
Thanks in Advance

hi Janardhan,
phantom assembly is the assembly which is not kept in stock rather it consumes directly.
Use of phantom assemblies are as below
Phantom assemblies are assemblies that have their own product structure, but whose assembly does not actually physically exist. The components of the phantom assembly are incorporated directly in the superordinate product. The product structure of the superordinate product contains a reference to the phantom assembly.
example - A car with music system.
During backflush, only the goods movement for the phantom assembly components are posted. The phantom assembly is marked as backflushed but does not trigger any goods movement.
Experts pl correct me if i'm wrong.
Regards,
Anil

Enter the price for the service item

Dear Experts,
We are implementing SRM 7.0 and we have upgraded our system with Service pack 7.Created a limit SC and approved at all levels. After approving SC system created PO in SRM but did not replicate to backend ECC system. When I looked PO in edit PO mode and system throws an error message "Enter the price for the service item".
Have any body faced this issue? If yes please guide me how to fix this issue or Suggest me any useful link or OSS messages.
Thanks in advance.
Thanks
Umakanth

Hello,
I assume you are using a Product category configured for Extended Classic scenario.
In this case a limit item in SC creates limit item in PO(in SRM). But when this PO is replicated to R/3, it always creates item with type 'D' for limit item in PO.
Now with respect to error message you get, can you check if you have specified all LImits (Overall value, Expected value etc)?
You can also try creating a PO directly in SRM with limit item (use same Product category as above) and see if it replicates.
If you get the same error, please raise a OSS message for SAP.
Thanks,
Sushil

Error msg: ZFI999:Maintain price for the material 254600254 in plant 1000

Hi gurus
18.02.2009 i created one STO PO. but material price in the accounting view the price was "Zero" in plant 1000. In plant 2000 the price has already maintained.
But today i updated the material price like Rs 200/- through MR21 for plant 1000.
After that while i transport the material through MB1B (351 mvt type) plant 1000 to 2000, i got the following error msg.
"ZFI999:Maintain price for the material 254600254 in plant 1000".
Regards
Amsi

Hi Amsi
the message no is not standard i think there has been a new message created. please check with your ABAPer about the message.
just want some clarification. you are doing STO from plant 1000 to 2000. the price should be picked for that material maintained in plant 2000.
in case of queries please revert back
Adwait Bachuwar

BAPI_PO_CHANGE to update the Price for the line item not updating the Price

Hi,
I am using BAPI_PO_CHANGE to update the Price for the line item. This BAPI is not updating the Price. I am using external cummit also, but the BAPI is not updating price.
I am passing following data to the BAPI.
Plant: CQ11
PO Material Price
4500002142 TEST_BATCH 12
Please provide suggestion.
Regards,
Jubin.

Hi,
check this link...this has sample code
[http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm]
Regards,
Surinder

Can I pay full price for a new iPhone with sprint instead of a contract?

Can I pay full price for a new iPhone with sprint instead of a contract?

Apparently not (in the U.S.). See the photo - it only shows T-Mobile as accepting contract-free (from the Apple Store).

A/R invoice PLD for BOM items need to hide the unit price

Dear All,
Our customer would like to have an A/R invoice like this: if the invoice has any BOM item, the unit price of child items should be hid. That means, I need to determine, if the item is the child of its parent, hide the unit price of it. Is there any way for me to know which item is the child item in A/R invoice PLD? I cannot find a column like status of item in the table that tells me this item is a regular item and that item is the child of an item. Thanks a lot.
Regards,
Yuka

Thanks for your reply. The problem is, an item in the invoice might be the child item or the regular item.
e.g, we have item A and B, they the child item of C. In the invoice, the customer may order 5 item C then add 10 item A as well.
Then the invoice will like this
C    5
A    5
B    5
A    10
Then they would like to hide A 5 B 5 but display A 10 as regular item.

Proposals are not getting generated for BOM items in MD50

Hi Gurus,
I have maintained strategy 50 in MRP for header material , Item category gp as LUMF & maintained consumption parameters in material master .
For dependent requirements i have maintained BOM for production & sales usage, Strategy is blank as it is customer specific component , Item category gp is NORM , individual requirements i.e 1 in MRP 4 view.
MRP type is PD in both materials.
When i run a MRP thru' MD50 after getting customer order.
it is not planning my dependent requirements i.e. proposals are not getting generated for dependent requirements (BOM materials).
Please let me know the solution.
Thanx in advance
Regards,
Nagraj Vasmate

try to use strategy 20

Avoid automatic creation of purchase requisition for bom item N

Dear.
When I create a production order , for the components with bom item N the system create a purchase requisition. I need to avoid this automatic creation , do you know a solution to obtain this ?
Thanks.

For the many people that have asked this question.
N item category in the BOM is always going to propose direct procurement. Through configuration I have not found a way to make it go away from the planned order. You can make it go away from the production order.
The IMG path:
Plant Maintenance and Customer Service
-> Maintenance and Service Processing
--> Maintenance and Service Orders
---> Functions and Settings for Order Types
----> Define Change Docs, Collective Purc. Req. Indicator, Operation No. Interval
Under the Res/PurRq -> Specify Never
In order make this setting effective, you must define the following
system message to error or warning, as it is stated on note 569984
Version Appl.A. No. Cat
00000000 C2 280 W
Please note that this setting is effective for reservations and
requisitions.
The best solution is to use BOM item category L with the bulk indicator set. You will not get any direct procurement proposals or planned orders and you can use long term planning to see the time phased MRP results.

Batch classification for BOM items

Hi ,
I am developing a conversion program to upload the class and characteristics to a BOM item . The class type is a custom class which needs to be assigned to the BOM item along with the class and characteristics value . Is there any FM/Bapi which can create the classtype for the BOM item and assign the class and values . I have tried with the FM 'BAPI_OBJCL_CREATE' but was not successful. Any help would be highly appreciated .
Sanjeev

this program can create bom succcess.but add stpu(subitem) ,have some problem.
REPORT ZPDM_CREATEBOM .
DATA: i_stko like STKO_API01.
data: T_STPO like table of STPO_API01 WITH HEADER LINE.
data: T_STPU like table of STPU_API01 WITH HEADER LINE.
data: BOM_HEADER like BICSK.
DATA: return TYPE char100,
return2 TYPE char100.
i_stko-BASE_QUAN = 1.
T_STPO-ITEM_CATEG = 'L'.
T_STPO-ITEM_NO = '0010'.
T_STPO-COMPONENT = '52008022702'.
T_STPO-COMP_QTY = '10'.
APPEND T_STPO.
T_STPO-ITEM_CATEG = 'L'.
T_STPO-ITEM_NO = '0020'.
T_STPO-COMPONENT = '52008022701'.
T_STPO-COMP_QTY = '20'.
APPEND T_STPO.
T_STPU-POINTER = 20.
T_STPU-UPOSZ = '0001'.
T_STPU-EBORT = 'A1'.
T_STPU-UPMNG = '10'.
APPEND T_STPU.
T_STPU-POINTER = 20.
T_STPU-UPOSZ = '0002'.
T_STPU-EBORT = 'A2'.
T_STPU-UPMNG = '10'.
APPEND T_STPU.*
CALL FUNCTION 'CSAP_MAT_BOM_CREATE'
EXPORTING
material = 'FERT005'
PLANT = '1000'
bom_usage = '1'
VALID_FROM =
CHANGE_NO = 'ECO200909096'
REVISION_LEVEL =
i_stko = i_stko
FL_NO_CHANGE_DOC = ' '
FL_COMMIT_AND_WAIT = ' '
FL_CAD = ' '
FL_DEFAULT_VALUES = 'X'
IMPORTING
FL_WARNING =
BOM_NO =
TABLES
T_STPO = T_STPO
T_DEP_DATA =
T_DEP_DESCR =
T_DEP_ORDER =
T_DEP_SOURCE =
T_DEP_DOC =
T_LTX_LINE =
T_STPU = T_STPU
EXCEPTIONS
ERROR = 1
OTHERS = 2

Select bom items with object dependencies

Hello everyone,
this is my problem: during bom explosion from production order I want to select
a bom item (eg 0020) only if not selected the previous item (eg 0010). there any way? what's the syntax for this object dependencies?
Thanks to all!

Hi,
As per my knowledge we can use selection condition in the BOM with reference to the Characteristics value only. I don't think so, there are options based on previous item selection.
Let's wait for PP Guru's Answers.
Thanks,
R.Loganathan

GR for BOM Material with Serial number

Hi all
I have 2 serialised materials A and B, A is the Parent Material and B the child material (BOM Scenario), both having serial numbers
I want to do GR without PO (501movement type) for the A material with the serial number, while doing GR i want BOM to be trigerred and at the same time i need to enter the serial number for the child material also.
This is not a subcontracting scenario, here i am not issuing any goods to vendor, i am getting some used parts which i want to track individual accessiroes wise with serial numbers.
Kindly suggest the backend settings
Regards
Amuthan M

Try MASE. it hold the last serial number.

RFC BAPI for BOM explosion with parametric effectivity

Hello,
I'm searching for a RFC enabled BAPI for BOM explosion which allows to evaluate parametric effectivity.

Hi you can also check CS_BOM_EXPLOSION_MAT
If its not remote enabled, write a custom fm(Remote enabled) and wrap this Fm.

Maintaining Price for BOM / Bom item with customer

Similar Messages

Maybe you are looking for