Maintenance Certificate through MOPZ

Dear All,
I want to renew my Maintenance Certificate through Service Marketplace and I already have requested Maintenance Certificate
for SRM 7.0 As (ABAP) and AS(JAVA).
As I am able to apply maintenance certificate for SRM 7.0 As JAVA,but not able to get the license of SRM 7.0 AS ABAP.
Is it possible to apply the Maintenance Certificate through MOPZ as I got Solman7.1 SP04 Installed in my System?
I already have gone through the Links below:
http://wiki.sdn.sap.com/wiki/display/SMP/LicenseKeyApplication+%28XX-SER-LIKEY%29
https://websmp209.sap-ag.de/~sapidb/011000358700001857722008E.pdf
Thanks & Regards
Ajitabh

Hi all,
Thanks for your replies.
I want to know one thing As I have applied the maintenance certificates for AS ABAP and AS JAVA of SRM 7.0.
As I got the certificate for JAVA and I have already applied it but still not getting certificate for ABAP.
I did it manually through SMP.
As I have checked in SOLMAN_WORKCENTER->>License Management->>As I can see Two columns as Maintenance Certificate and Received Maintenance Certificate.
While in Maintenance Certificate Column I am getting Yellow LED and in the Received Maintenance Certificate I am getting Green LED for SRM 7.0.I am Confused regarding this Certificate.
Kindly help me out.
Thanks & Regards
Ajitabh

Similar Messages

  • Maintenance Certificate missed in license type

    Hello everyone,
    We are in the middle of the upgrade to our BW landscape from 3.5 to 7.01. After I upgraded our BWT system today and ready to apply support packages, as usual I go to apply maintenace certificate according to SAP's instruction on "How to Request a Maintenace Certificate manually through SAP support Portal". I found NO "maintenance certificate" under license type, only have "standard and Java" license type. It is very strange since I just applied "maintenance cerfiticate" on 5/15/2009 when I update support package for my BW sandbox (BWS)! Not sure why it is no longer there? Have you guys experience the same? And how can I get my maintenance certificate for my BWT system so I can move forward with my support package update?
    Thanks for your help. This is very important since our upgrade is stopped now.
    Yujun Ran

    Hi,
    What kesavan   has mentioned above is perfect for manually applying the Maintainance certificates.
    These certificates can be made to automatically distribute across the systems in the landscape.
    refer to the below FAQ, and also to the below notes;
    Note 1280664 - Distribution of maintenance certificates: Troubleshooting
    When will a Maintenance Certificate be required by SAP's software logistics tools?*
    Maintenance Certificate will be required for all customers as of January '09.
    Details:
    As of SPAM/SAINT- version 0034 the Maintenance Certificate will be required to import support packages. SPAM/SAINT- version 0034 will be released in January u201909.
    All support packages released in 2008 can be applied using a SPAM/SAINT- version prior to version 0034 and therefore do not require a Maintenance Certificate. Hence, when using SPAM/SAINT- version 0034 or higher version, all support packages require a valid Maintenance Certificate in order to be imported.
    Java support packages (imported using JSPM) will require a Maintenance Certificate in the near future. Currently a warning is displayed.
    Which version of SAP Solution Manager will be required to benefit from automatic deployment of Maintenance Certificates?
    SAP Solution Manager 7.0 SP 16 will be required to benefit from automatic deployment.
    Regards,
    Ravi
    Edited by: Ravi Kumar on Jun 23, 2009 8:40 AM
    Edited by: Ravi Kumar on Jun 23, 2009 8:44 AM

  • How to install maintenance certificate and License with solution Manger?

    Hi all,
    Is this possible to install maintenance certificate and License with solution Manger atomatically ?
    Regards,
    Neni

    Hi Swaroop,
    There is a feature in SAP Solution manager through which we can instal the licenses.
    Please see below links,
    http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/41/42b6397c604278b6626f3d570c98c8/content.htm
    http://help.sap.com/saphelp_sm70ehp1_sp23/helpdata/en/89/a7c08d740c4cffb491f98801f17d30/content.htm
    Thanks,
    Jagadish.

  • "Automatic Maintenance Certificate" is not updating satellite systems

    Hi,
    I want to activate Automatic Maintenance Certificate via solution manager to my satellite systems
    Solution Manager is 7.01 at SPS23
    Satellite systems are all on Netweaver 7.01 SPS06
    Right now, Solution Manager receives automatically the maintenance certificate.
    Unfortunately, my satellite systems do not receive it.
    on my satellite system (PRD - ECC 6.04), in SDCCN, I see that job "Maintenance Package" shows these messages:
    Maintenance Package completed
    Updating license data completed from destination  [Maintenance Package]
    No active master Solution Manager destination maintained. [Maintenance Package]
    Updating license data not possible [Maintenance Package]
    note that I reviewed completely SAP note 1280664 to no avail.

    Hi Daniel,
    This is exactly the solution.
    I finally also found another solution from http://forums.sdn.sap.com/post!reply.jspa?messageID=9122507#9122507
    In managed system, goto SDCCN, browse through the menu options to reach task specific settings and then edit the RFC destination settings.
    In RFC settings you get to see RFC of SM system.
    Make the SM destination as master destination. Tick the Master checkox.
    Thanks for your help.

  • SAPKB70104 No queue calculation because of a missing maintenance certificat

    Dear SDNites,
    I have recently installed ERP6,EHP1 on Linux with DB29.7 for our Sandbox env'.
    I am trying to update the SAP patche level for ABAP and BASIS from release-701,level03,patch SAPKA/B70103 to  SAPKA/B70106.
    My current SPAM level is 7.01/39. When I am trying to calculate the queue after display/define, it thorws an error as follows..
    "SAPKB70104 No queue calculation because of a missing maintenance certificate "
    My question, as I am using the latest SPAM version..still do I need to have the maintanance certificate in place...?
    Pls help me in this regard
    Thanks in advance
    Venu

    Hello Venu,
    the fact of running the last/next-to-last version of SPAM is not directly related to the error you're facing.
    Besides note #1240265 that Karan Singh suggested, you can request a Maintenance Certificate manually through the SAP Support Portal.
    https://websmp209.sap-ag.de/~sapidb/011000358700001504082008E
    I hope this information helps.
    Best regards,
    Tomas Black

  • Maintenance Certificate   Update

    Hi,
        I added my development system in solution manager (Through SMSY).I want to configure every 3 months maintenance certificate will be update in development system through solution manager,is it possible,if any one plz guide me to do step by step.
    Thanku

    Hi,
        Thnaks for response,I am trying to distribute maintenance certificate automatically in solman for  the satelite systems.
    In the IMG choose the following path: SAP Reference IMG -> SAP
    Solution Manager -> Configuration -> Scenario-Specific
    Settings -> Change Management -> Node text not found ->
    Activate Automatic License Data Distribution.
    But I could not find this path in SPRO. So, Where should I activete the automatic distribution. And also please provide the steps needs to be followed both the solman and saltelite systems to automatically distribute the maintenance certificate.
    Mine patch level is -- ST - 400 - 0018 .
    Mine is job  : REFRESH_ADMIN_DATA_FROM_SUPPORT successfully finshing.
    guide me for the same to proceed.
    Thnaku

  • Maintenance Order through Measuring Point

    Dear all,
    I want to know whether it is possible to create the maintenance order on the basis measuring point .
    I know how to create the order on the basis of measuring counter.
    Is there any procedure to create the maintenance Order through measuring point as done in case of counter?
    kindly provide the solution for Creation of Maintenance Order using Measuring Point..

    Really very thanks for the solution.
    I have one more query, we can create the measuring point using the t.code IK01.As you told we have to create the measuring point with upper and lower range.
    Is that we have to create 2 measuring point for upper as well as lower range or in one measuring point it is possible to accumulate both the upper and lower range.
    If it is possible to accumulate both the upper and lower range in one measuring point then kindly provide the procedure.
    Thanks in advance.

  • Getting error in distribution of Maintenance Certificate via SDCCN

    Hello All,
                    While executing SPAU in ECC 6.0 I am getting error in distribution of Maintenance Certificate via SDCCN.
    While I am trying to download note 0001293657 Fehler bei Verteilung von Wartungszertifikaten über SDCCN- I am getting error in distribution of Maintenance Certificate via SDCCN...Please suggest

    Hi,
    Check wheather your Maintenance certificate is valid or not.
    For checking the same goto Slicense TCODE.
    Thanks
    Anil

  • The maintenance certificate is visible for a system in the SAP Supportporta

    Hi Guys,
    We are using automatic distribution of maintenance certificates by SAP Solution Manager.
    We are ok with prerequisites ( back. jobs , system data , SDCCN jobs etc.) but maintenance certificate is not being applied to the satellite systems.
    report RAGS_MK_DISPLAY_FILE does not list down systems and neighter I can see maintenance cert. in SAP support portal.
    Can somebody provide hint.
    Best Regards,
    Tushar

    >
    TusharC Chavan wrote:
    > We are using automatic distribution of maintenance certificates by SAP Solution Manager.
    >
    > We are ok with prerequisites ( back. jobs , system data , SDCCN jobs etc.) but maintenance certificate is not being applied to the satellite systems.
    >
    > report RAGS_MK_DISPLAY_FILE does not list down systems and neighter I can see maintenance cert. in SAP support portal.
    Hi Tushar,
    Have you already checked this SAP Note with hints for trouble shooting?
    [SAP Note 1280664 - Distribution of maintenance certificates: Troubleshooting|https://service.sap.com/sap/support/notes/1280664]
    General information: http://www.service.sap.com/maintenancecertificate
    Report RAGS_MK_DISPLAY_FILE and SAP Support Portal does not show any entries
    ==> That means, SolMan has not requested successfully Maintenance Certificates.
    Hints for trouble shooting:
    - check log of job REFRESH_ADMIN_DATA_FROM_SUPPORT
    - check whether these SAP Note have been already applied. Both SAP Notes are linked in troubleshooting note.
    1293657 - Error in distribution of Maintenance Certificates via SDCCN
    1251060 - Error in requirement process of maintenance certificate
    Good luck and best regards,
    Ruediger

  • Maintenance Certificate for SAPNetweaver Trial

    Does anybody now if it possible to obtain an Maintenance Certificate for SAPNetweaver Trial System?

    Hi,
    Check
    https://websmp204.sap-ag.de/maintenancecertificate    
    I doubt that a trial system could have a maintenance certificate as it is not to be used as a long term system and so should not involve maintenance procedures.
    Regards,
    Paul

  • How to request and install a microsoft certificate through CA to Apple TV

    how to request and install a microsoft certificate through CA to Apple TV

    Apple TV does not have a browser and you can't install certificates on it
    if you are using mirror from a mac or a ios device its on them you needs to take actions
    when using mirror the Apple TV is just a remote display

  • Maintenance certificate

    Dear All,
    System not generation new Maintenance certificate.
    In SDCCN of satellite system log of Maintenance Package job as below.
    12.07.2009     20:30:42     Maintenance Package completed     /BDL/SAPLBDL11     0
    12.07.2009     20:30:42      > Not due, due every 0 , last successful run 175430 20090702     /BDL/SAPLBDL11     0
    12.07.2009     20:30:42     Get License Data from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
    12.07.2009     20:30:42      > Not due, due every 7 day(s), last successful run 203050 20090709     /BDL/SAPLBDL11     0
    12.07.2009     20:30:42     Refresh service definitions from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
    12.07.2009     20:30:42      > Not due, due every 1 day(s), last successful run 203042 20090711     /BDL/SAPLBDL11     0
    12.07.2009     20:30:42     Refresh sessions from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
    12.07.2009     20:30:42      > Not due, due every 7 day(s), last successful run 203043 20090709     /BDL/SAPLBDL11     0
    12.07.2009     20:30:42     Delete old session and log data :     /BDL/SAPLBDL11     0
    12.07.2009     20:30:42      > Next periodic task 0000000089 has been created to run at 20090713202713     /BDL/SAPLBDL11     0
    12.07.2009     20:30:42     Maintenance Package started     /BDL/SAPLBDL11     0
    Please kindly help to resolve problem.
    Regards,
    Nikunj Thaker.

    Dear David,
    Thanks for reply.
    Manually execute Get License Data in satellite system and log as below.
    14.07.2009     10:51:41     Retrieval of license data completed from destination SM_SMNCLNT100_BACK     /BDL/SAPLBDL11     0
    14.07.2009     10:51:41      > License data retrieved from Solution Manager and installed     /BDL/SAPLBDL11     0
    14.07.2009     10:51:41      > Local system number: 000000000311082908     /BDL/SAPLBDL11     0
    14.07.2009     10:51:41     Fetch license data from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
    14.07.2009     10:51:41     Retrieval of license data started from destination SM_SMNCLNT100_BACK     /BDL/SAPLBDL11     0
    After finishing above manually executed Maintenance Package in satellite syste and log as below.
             14.07.2009     10:52:41     Maintenance Package completed     /BDL/SAPLBDL11     0
             14.07.2009     10:52:41      > Not due, due every 0 , last successful run 105141 20090714     /BDL/SAPLBDL11     0
             14.07.2009     10:52:41     Get License Data from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
             14.07.2009     10:52:41      > Not due, due every 7 day(s), last successful run 203050 20090709     /BDL/SAPLBDL11     0
             14.07.2009     10:52:41     Refresh service definitions from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
             14.07.2009     10:52:41      > Not due, due every 1 day(s), last successful run 203042 20090713     /BDL/SAPLBDL11     0
             14.07.2009     10:52:41     Refresh sessions from destination SM_SMNCLNT100_BACK :     /BDL/SAPLBDL11     0
             14.07.2009     10:52:41      > Not due, due every 7 day(s), last successful run 203043 20090709     /BDL/SAPLBDL11     0
             14.07.2009     10:52:41     Delete old session and log data :     /BDL/SAPLBDL11     0
             14.07.2009     10:52:41      > Next periodic task 0000000093 has been created to run at 20090715202713     /BDL/SAPLBDL110
             14.07.2009     10:52:41     Maintenance Package started     /BDL/SAPLBDL11     0
    So still there is no difference in log of Maintenance Package after executing Get License Data.
    Still i am not getting new maintenance certificate.
    Regards,
    Nikunj Thaker.

  • Automatic renewal of certificates through CEP / CES.

    We currently have a PKI on Windows 2008 R2 and in this case as customers use notebooks with Windows 7 SP1.
    I have problem with the automatic renewal of computer certificate through CEP / CES.
    Services CEP / CES are installed on the same server, the CA is in another server.
    You want to automatically renew computer certificate through Internet.
    These services are configured to only computer certificate renewal and renovation to allow authentication using a certificate previously issued to PC.
    The first computer certificate is issued automatically through the settings in Group Policy in Active Directory, then the team has its certificate is configured PC Local Group Policy to configure the server URL CEP / CES.
    I have no problem when I do the renewal through the MMC, only occurs when the team wants it done automatically.
    Error events are:
    Event ID 68
    Certificate enrollment for Local system failed in authentication to policy servers with ID  {6ADBCC41-F91F-405C-88EC-4FEF12CF7FCF} 
    (Provider could not perform the action since the context was acquired as silent. 0x80090022 (-2146893790))
    Event ID 67
    Certificate enrollment for Local system failed to load policy from policy servers with ID  {6ADBCC41-F91F-405C-88EC-4FEF12CF7FCF} 
    (Provider could not perform the action since the context was acquired as silent. 0x80090022 (-2146893790))
    Event ID 6
    Automatic Certificate enrollment for Local system failed (0x80090022) Provider could not perform the action since the context was acquired as silent.
    The documentation used to install CEP / CES is:
    http://www.microsoft.com/en-us/download/details.aspx?id=1746
    I thank anyone who can guide me with this problem.
    Greetings.

    Hi,
    I think "Auto Renewal of certificates through Internet (CEP / CES)" is a new feature in ADCS of Windows 2012. Not sure whether it can be realized in Server 2008.
    Anyway, here are two links which might be useful to you:
    Enabling CEP and CES for enrolling non-domain joined computers for certificates
    http://blogs.technet.com/b/askds/archive/2010/05/25/enabling-cep-and-ces-for-enrolling-non-domain-joined-computers-for-certificates.aspx
    So anybody got autoenrollment working for CES on non-domain-joined computer?
    http://www.networksteve.com/forum/topic.php/So_anybody_got_autoenrollment_working_for_CES_on_non-domain-join/?TopicId=28451&Posts=2
    Niko

  • Problem winth  install Maintenance certificate

    Hello A have a problem  with  the Maintenance certificate, I genered the  certificate  but  enthe end of de row  there is this message:
    Limited license requested
    I upload this certficate  in the backend (t-code: slicense) and the result in the signal red and says on Note on Validity: Not yet valid
    In this link Limited license requested says:
    License keys for mySAP Business Suite
    Additional Documentation
    The license key you requested could only be granted for a limited time, for the following reason:
    Restricted license key requested
    You requested a restricted license key for your system. If you need an unrestricted license key, please request a new, unrestricted license key for the same system under this installation.
    I regenerated  the certificate  but the resul is the same, I don`t know How can I request a new, unrestricted license key for the same system under this installation.?
    thanks  for your help

    HI Naresh
    I did these steps and I upload the license in backend but  the message says:  2 licenses succesfull installed then  in the list of license
    there are two red trafic light
    ITP     Q1851760771     NetWeaver_DB6     11.08.2009     31.12.9999     Perm     0020310707     000000000310985405     Not yet valid
    ITP     Q1851760771     Maintenance_DB6     11.08.2009     12.11.2009     Perm     0020310707     000000000310985405     Not yet valid
    I don`t know what`'s the problem?
    any suggestion
    Regards
    Danny
    Edited by: Graciela Troya on Aug 13, 2009 12:35 AM

  • Maintenance certificate Renew

    Hi,
    I cannot renew the maintenance of certificate. When I go to the request a new valid maintenance is not avalaible for to keep.
    What can i do? I can´t to validate a patch queue.
    More thanks

    Hi,
    check below guide to check how you can generate maintenance certificate from solman or manually from SMP:
    http://www.easymarketplace.de/Maintenance-Certificates.pdf
    Thanks
    Sunny

Maybe you are looking for

  • Fiscal Year Variant not Maintained

    Hello All, while creating asset master using AS01 T Code i am getting an error "Fiscal year "A3" Variant is not maintained for Financila year 2010 for Compnay Code 0600". but i have configured Fical year variant and assigned to co code, i am able to

  • Macintosh HD greyed out and won't repair or mount; no Admin privilege in ML on USB

    Hi everyone I am not a specialist by any means, but I have been trying to help my friend fix his Macbook aluminum after a disaster installing Mountain Lion. After attempting to install ML over Snow Leopard on the Macbook, I was not able to install it

  • How to delete reading list in ios 7

    Please i want to know how to delete reading list in ios7

  • What is the best iPod for me?

    I have an iPod Touch 4th Generation and when iTunes stops covering it, I want to get a new device for music. I really don't play games on it, but I need something that has a lot of storage for my music, has good sound, and fairly inexpensive. I was l

  • Query Execution problem in SAP BI Portal

    Dear all I have a query which I want to execute in BI portal. For this , I opened up BEx Query Designer and from there pressed the "Execute" button which opened the login screen in my browser.  I successfully logged in and provided inputs for the que